The ambivalent role of Urdu and English in multilingual Pakistan: a Bourdieusian study.

Pakistan, one of the eight countries comprising South Asia, has more than 212.2 million people, making it the world's fifth most populous country after China, India, USA, and Indonesia. It has also the world's second-largest Muslim population. Eberhard et al. (Ethnologue: languages of the world, SIL International, 2020) report 77 languages used by people in Pakistan, although the only two official languages are Urdu and English. After its Independence from the British colonial rule in 1947, it took much deliberation for the country to make a shift from its monolingual Urdu orientation to a multilingual language policy in education in 2009. This entailed a shift from the dominant Urdu language policy for the masses (and English exclusively reserved for elite institutions), to a gradual and promising change that responded to the increasing social demand for English and for including regional languages in the curriculum. Yet English and Urdu dominate the present policy and exclude regional non-dominant languages in education that themselves are dynamic and unstable, and restructured continually due to the de facto multilingual and plurilingual repertoire of the country. Using Bourdieu's (Outline of a theory of practice Cambridge University Press, Cambridge, 1977a, The economics of linguistic exchanges. Soc Sci Inform 16:645-668, 1977b, The genesis of the concepts of habitus and field. Sociocriticism 2:11-24 1985, Language and symbolic power Polity Press, Cambridge, 1991) conceptualization of habitus, this study analyzes letters to the editor published between 2002-2009 and 2018-2020 in a leading English daily of Pakistan. The analysis unveils the linguistic dispositions that are discussed in the letters and their restructuring through market forces, demonstrating a continuity between the language policy discourse and public aspirations. The findings also indicate the ambivalences towards Urdu and English in relation to nationalistic ideologies, modernity and identity.

Synthesis, characterization, and evaluation of the antifungal properties of tissue conditioner incorporated with essential oils-loaded chitosan nanoparticles.

PURPOSE: This study aims to investigate new tissue conditioner (TC) formulations involving chitosan nanoparticles (CSNPs) and essential oils (EO) for their antifungal potential, release kinetics, and hardness. MATERIALS AND METHODS: CSNPs were synthesized, and the separate solutions of CSNP were prepared with two types of EO, i.e., Oregano oil and Lemongrass. The EO was loaded separately in two concentrations (200 µL and 250 µL). The blank and EO-loaded CSNPs were screened against Candida albicans (C. albicans), and their minimum inhibitory concentration was established. GC Reline™ (GC corporation, USA) TC was considered a control group, whereby the four experimental groups were prepared by mixing CSNPs/EO solutions with TC powder. The antifungal effectiveness (C. albicans) and release kinetics behavior (1-6 h, 24 h, 48 h, and 72 h) was investigated. The Shore A hardness of control and experimental groups was evaluated in dry and wet modes (deionized water and artificial saliva). For statistical analysis, SPSS version 22 was used to do a one-way ANOVA post-hoc Tukey's test. RESULTS: Compared to the control group, TCs containing blank CSNPs and CSNPs loaded with EO showed 3 and 5 log reductions in C. albicans growth, respectively. A significantly high antifungal effect was observed with TC containing lemongrass essential oil (200 µL). The continuous release of EO was detected for the first 6 hours, whereas completely stopped after 48 hours. Mean hardness values were highest for dry samples and lowest for samples stored in artificial saliva. The statistically significant difference within and between the study groups was observed in mean and cumulative essential oils release and hardness values of TCs over observed time intervals irrespective of storage media. CONCLUSION: TCs containing essential-oil-loaded CSNPs seem a promising alternative treatment of denture-induced stomatitis, however, a further biological analysis should be taken.

Antifungal Potential of Green Synthesized Magnetite Nanoparticles Black Coffee-Magnetite Nanoparticles Against Wilt Infection by Ameliorating Enzymatic Activity and Gene Expression in Solanum lycopersicum L.

Tomato plants are prone to various biotic and abiotic stresses. Fusarium wilt is one of the most devasting diseases of tomatoes caused by Fusarium oxysporum f. sp. lycopersici, causing high yield and economic losses annually. Magnetite nanoparticles (Fe3O4 NPs) are one of the potent candidates to inhibit fungal infection by improving plant growth parameters. Spinach has been used as a starting material to synthesize green-synthesized iron oxide nanoparticles (IONPs). Various extracts, i.e., pomegranate juice, white vinegar, pomegranate peel, black coffee (BC), aloe vera peel, and aspirin, had been used as reducing/stabilizing agents to tune the properties of the Fe3O4 NPs. After utilizing spinach as a precursor and BC as a reducing agent, the X-ray diffraction (XRD) pattern showed cubic magnetite (Fe3O4) phase. Spherical-shaped nanoparticles (∼20 nm) with superparamagnetic nature indicated by scanning electron microscopy (SEM) monographs, whereas energy-dispersive X-ray gives good elemental composition in Fe3O4 NPs. A characteristic band of Fe-O at ∼ 561 cm-1 was exhibited by the Fourier transform infrared (FTIR) spectrum. X-ray photoelectron spectroscopy (XPS) results confirmed the binding energies of Fe 2p3/2 (∼710.9 eV) and Fe 2p1/2 (∼724.5 eV) while, Raman bands at ∼310 cm-1 (T2 g ), ∼550 cm-1 (T2 g ), and 670 cm-1 (A1 g ) indicated the formation of Fe3O4 NPs synthesized using BC extract. The in vitro activity of BC-Fe3O4 NPs significantly inhibited the mycelial growth of F. oxysporum both at the third and seventh day after incubation, in a dose-dependent manner. In vivo studies also exhibited a substantial reduction in disease severity and incidence by improving plant growth parameters after treatment with different concentrations of BC-Fe3O4 NPs. The increasing tendency in enzymatic activities had been measured after treatment with different concentrations of NPs both in roots and shoot of tomato plants as compared to the control. Correspondingly, the upregulation of PR-proteins and defense genes are in line with the results of the enzymatic activities. The outcome of the present findings suggests that Fe3O4 NPs has the potential to control wilt infection by enhancing plant growth. Hence, Fe3O4 NPs, being non-phytotoxic, have impending scope in the agriculture sector to attain higher yield by managing plant diseases.

Sustainable synthesis of microwave-assisted IONPs using Spinacia oleracea L. for control of fungal wilt by modulating the defense system in tomato plants.

BACKGROUND: Changing climate enhances the survival of pests and pathogens, which eventually affects crop yield and reduces its economic value. Novel approaches should be employed to ensure sustainable food security. Nano-based agri-chemicals provide a distinctive mechanism to increase productivity and manage phytopathogens, with minimal environmental distress. In vitro and in greenhouse studies were conducted to evaluate the potential of green-synthesized iron-oxide nanoparticles (IONPs) in suppressing wilt infection caused by Fusarium oxysporum f. sp. lycospersici, and improving tomato growth (Solanum lycopersicum) and fruit quality. RESULTS: Various microwave powers (100-1000 W) were used to modulate the properties of the green-synthesized IONPs, using spinach as a starting material. The IONPs stabilized with black coffee extract were substantively characterized using X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy, dielectric and impedance spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning and transmission electron microscopy (SEM and TEM, respectively), and magnetization analysis. XRD revealed a cubic magnetite (Fe3O4) phase with super-paramagnetic nature, detected at all microwave powers. The binding energies of Fe 2p3/2 (710.9 eV) and Fe 2p1/2 (724.5 eV) of Fe3O4 NPs were confirmed using XPS analysis at a microwave power of 1000 W. Uniform, spherical/cubical-shaped particles with an average diameter of 4 nm were confirmed using SEM and TEM analysis. A significant reduction in mycelial growth and spore germination was observed upon exposure to different IONP treatments. Malformed mycelium, DNA fragmentation, alternation in the cell membrane, and ROS production in F. oxysporum indicated the anti-microbial potential of the IONPs. The particles were applied both through the root (before transplantation) and by means of foliar application (after two weeks) to the infected seedlings. IONPs significantly reduced disease severity by an average of 47.8%, resulting in increased plant growth variables after exposure to 12.5 µg/mL of IONPs. Analysis of photosynthetic pigments, phenolic compounds, and anti-oxidant enzymes in the roots and shoots showed an increasing trend after exposure to various concentrations of IONPs. Correspondingly, lycopene, vitamin C, total flavonoids, and protein content were substantially improved in tomato fruits after treatment with IONPs. CONCLUSION: The findings of the current investigation suggested that the synthesized IONPs display anti-fungal and nutritional properties that can help to manage Fusarium wilt disease, resulting in enhanced plant growth and fruit quality.

Wide-Range Humidity-Temperature Hybrid Flexible Sensor Based on Strontium Titanate and Poly 3,4 Ethylenedioxythiophene Polystyrene Sulfonate for Wearable 3D-Printed Mask Applications.

In this paper, we report a fast, linear wide-range hybrid flexible sensor based on a novel composite of strontium titanate (SrTiO3) and poly 3,4 ethylenedioxythiophene polystyrene sulfonate (PEDOT: PSS) as a sensing layer. Inter-digitate electrodes (IDEs) were printed for humidity monitoring (finger: 250 µm; spacing: 140 µm; length: 8 mm) whilst a meander-based pattern was printed for the temperature measurement (meander thickness: 180 µm; spacing: 400 µm) on each side of the PET substrate using silver ink. Moreover, active layers with different concentration ratios were coated on the electrodes using a spray coating technique. The as-developed sensor showed an excellent performance, with a humidity measurement range of (10-90% RH) and temperature measurement range of (25-90 °C) with a fast response (humidity: 5 s; temperature: 4.2 s) and recovery time (humidity: 8 s; temperature: 4.4 s). The reliability of the sensor during mechanical bending of up to 5.5 mm was validated with a reliable performance. The sensor was also used in real-world applications to measure human respiration. For this, a suggested sensor-based autonomous wireless node was included in a 3D-printed mask. The manufactured sensor was an excellent contender for wearable and environmental applications because of its exceptional performance, which allowed for the simultaneous measurement of both quantities by a single sensing device.

Road and Transportation Lead to Better Health and Sustainable Destination Development in Host Community: A Case of China Pakistan Economic Corridor (CPEC).

Road and transportation plays a vital role in the sustainable development and prosperity of the area. This study investigates the impact of road and transportation on the health of the host community and its sustainable destination development. Data were collected from the host community and were analyzed through factor analysis and structure equation modeling to evaluate the in-hand data of the structural relationship. It is revealed that road and transportation has a significant role in the improvement of health. Moreover, income mediates the effects of accessibility and employment on health. This study will help the authorities and policy maker to formulate policy regarding road and transportation that will improve health of the host community and its sustainable development. The study is limited to the seven districts of Hazara division and explores the societal aspect of CPEC on the host community, future researcher may investigate other regions and may select some other variables such as effect on GDP, per capita income, etc.

Environmental impact and diversity of protease-producing bacteria in areas of leather tannery effluents of Sialkot, Pakistan.

Massive discharge of wastes produced by the processing of leather so far confers the most important environmental challenge facing the tanneries worldwide. Waste material from tanneries mostly consists of skin remnants and proteinaceous substances as by-products of leather processing. In these conditions, protease-producing bacteria play a vital role in degrading wastes in this sludge. Therefore, an investigation was made to study the effect of long-term tannery sludge contamination on the diversity of both protease-producing microbes and of bacterial extracellular proteases near tanneries of Sambrial and Sialkot. The high amount of carbon and nitrogen in the soil samples reflected their effect on the diversity of the microbial communities in these areas. Phylogenetic analysis based on 16S rRNA gene sequences suggest that the isolated proteolytic bacteria belonged to 9 different genera including Pseudomonas (26.19%), Proteus (19.04%), Serratia (16.66%), Klebsiella (14.28%), Providencia (9.52%), Achromobacter (7.14%), Enterobacter (2.38%), Myroides (2.38%), and Acinetobacter (2.38%). Enzyme activity showed that among all Pseudomonas and Proteus showed relatively high protease production, and inhibition studies revealed that proteases produced by all isolates were strongly inhibited by serine and/or metalloprotease inhibitors, and a smaller proportion was inhibited by inhibitors of cysteine and/or aspartic proteases. Furthermore, isolated bacteria revealed promising degradation activities against casein and/or gelatin with only a few that could hydrolyze elastin, suggesting proteases produced by these isolated bacteria belong to different classes of proteases, i.e., serine and metalloproteases. This study provided new insights on the community structure of cultivable protease-producing bacteria near tannery sludge of Sambrial and Sialkot. This study would be beneficial not only for establishing the way for effective degradation of tannery slugs but also for questing the novel properties of proteases for a future technological application.

Synthesis of an anti-cariogenic experimental dental composite containing novel drug-decorated copper particles.

Secondary caries is one of the most major cause for re-placement of dental composite restorations. Targeting the survival of cariogenic bacteria residing on the restoration surface may reduce this problem. The present study aims to evaluate the antibacterial potential as well as assess the physical and chemical properties of experimental dental composites containing novel drug-decorated copper particles (DDCP) as adjunct antibacterial filler particles. These were incorporated at concentrations of 0%, 0.5%, 0.10%, 0.20%, and 0.25% (w/w) into experimental composite consisting of methacrylate monomers and silanized silica fillers. RESULTS: Direct contact test revealed that the anti-cariogenic potential of experimental composites was more than the control groups. The cell viability assay showed no toxic effect on MC3T3-E1 cell lines in the MTT assay. The microhardness of experimental composites increased as the percentage of DDCP increased, however, the degree of cure was increased only up till the concentration of 0.20%. The release kinetics of the composites reveals that even after 28 days there was a steady and slow release of copper particles signifying the sustained anti-cariogenic effect. CONCLUSION: The experimental composites have good anti-cariogenic potential, which was sustained for one month without any deleterious effect on the physical and chemical properties of resin dental composites.

Microwave-Assisted Green Synthesis and Characterization of Silver Nanoparticles Using Melia azedarach for the Management of Fusarium Wilt in Tomato.

These days, research in agriculture is focusing on the theme of sustainability along with protection of agriculture produce. Nanotechnology in the agriculture sector aims for the enhancement of agricultural produce and the reduction of pesticides through providing innovative agrochemical agents and their novel delivery mechanisms. The current investigation involved the green synthesis of silver nanoparticles (AgNPs) from the aqueous leaf extract of Melia azedarach by following a microwave-assisted method to control Fusarium oxysporum, the causal agent of tomato wilt. Biosynthesized Melia leaf extract (MLE)-AgNPs were characterized by UV-visible spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectrometry, dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and zeta potential analysis. The intensity of the peak at 434 nm in UV-vis spectra, attributed to the surface plasmon resonance of MLE-AgNPs, changes with reaction parameters. TEM exhibits spherical shaped nanoparticles with an average particle size range from 12 to 46 nm. Efficient inhibition of F. oxysporum, the causal agent of tomato wilt, was achieved after exposure to MLE-AgNPs both in vivo and in vitro. In vitro studies exhibited repressed fungal mycelial growth with 79-98% inhibition as compared to the control. Significant increases in growth parameters of tomato seedlings were observed after treatment with biosynthesized nanoparticles as compared to F. oxysporum-infected plants grown without them under greenhouse conditions. Furthermore, SEM imaging was done to reveal the prominent damage on the cell wall of hyphae and spores after MLE-AgNP treatment. Propidium iodide (PI) staining of mycelium indicated the extent of cell death, causing irretrievable damage and disintegration of cellular membranes by altering the membrane permeability. Also, 2',7'-dichlorofluorescin diacetate (DCFH-DA) fluorescence specifies intracellular reactive oxygen species (ROS) production in F. oxysporum after treatment with MLE-AgNPs. The current investigation suggested that biosynthesized nanoparticles can revolutionize the field of plant pathology by introducing an environment-friendly approach for disease management and playing a potential part in agriculture industry. However, to date, little work has been done to integrate nanotechnology into phytopathology so, this area of research is in need of adoption and exploration for the management of plant diseases.

Cylindrical Cavity Sensor for Distinction of Various Driveability Index Gasoline with Temperature Robustness.

In this paper, a cylindrical cavity sensor based on microwave resonant theory is proposed to distinguish between various driveability index gasolines under temperature variations. The working principle of the proposed sensor is based on the fact that the change in permittivity of gasoline samples inside cavity sensor will also cause a change in resonant frequency. The proposed sensor has good sensitivity in terms of resonant frequency separation, which enables it to capture the minute permittivity changes and distinguish different gasolines. By using a normal gasoline permittivity of 2.15 and changing sensor dimension parameters, the sensor was designed by high-frequency structure simulator (HFSS). The designed sensor has a resonant frequency of 7.119 GHz for the TM012 mode with a 19.2 mm radius, a 35 mm height, and one-port coupling probe of 8 mm height. The proposed cylindrical cavity sensor shows advantages of excellent resonant characteristics of small cavity size and small sample amount. To optimize and verify the parameters of the sensor, many experiments have been carried out using HFSS and a vector network analyzer (VNA). Consequently, the proposed sensor is proven to be robust to temperature changes in terms of resonant frequency separation. The minimum frequency separation to distinguish gasoline samples is found to be larger than 29 MHz with reflection coefficients under -11 dB for temperature changes from -35 °C to 0 °C. The consistency of experimental and theoretical results also are presented, which guarantees accuracy of the sensor for the distinction of gasoline.

REPORT- Some ethanobotanically important plants from Cholistan area for anti avian influenza virus (AIV) H9N2 screening.

Avian influenza or bird flu is a common problem of domestic and wild birds. Some of its strains are able to cross the species barrier and cause infection in various members of class Mammalia. In view of relatively lesser efficacy of vaccines, antiviral therapies remain the only choice for the sustenance of mammals acquiring this highly devastating infection. This study is based on the evaluation of antiviral potential of methanol extracts of eleven selected Cholistani plants. The methanol extracts were prepared by using dried plants material followed by concentrating in a rotary evaporator and finally air dried before dissolving in nanopure water. The suspension was filter sterilized and subjected to in ovo antiviral assays. The allantoic fluids were harvested and haemagglutinin (HA) titers were determined. Among the eleven plants evaluated all methanol extracts were found effective against AIV H9N2 except S. baryosma extract. The medicinal plants O. compressa, N. procumbens, and S. surattense were found to be more effective than others and they retained HA titers at 0 after challenge. The next in order were extracts of O. esculentum, H. salicornicum and S. fruticosa which kept HA titers at 4, 8 and 16 respectively. The extracts of H. recurvum, P. antidotale, S. icolados and A. aspera were found less effective than above mentioned plant extracts and they kept the HA titers at 32, 64, 128 and 256 respectively. These results led us to conclude that the medicinal plants of Cholistan region are a rich source of antiviral agent(s) against AIV H9N2 and could be a source of cost effective alternate therapeutics.

An analysis of chronic kidney disease risk factors in a Louisiana nursing home population: a cross-sectional study.

BACKGROUND: Chronic Kidney Disease (CKD) and its progression are associated with multiple risk factors. CKD is prevalent in nursing homes residents, but factors related to CKD in this setting have not been defined. METHODS: A cross-sectional study was conducted (n=103). Data was abstracted using standardized forms and analyzed (SAS 9.2). Chi square and t-test statistics were used to compare proportions and means; correlation coefficients were used to describe associations. Logistic models were fit to the data to determine multivariate associations. Modification of Diet in Renal Disease (MDRD) formula was used to estimate GFR. CKD was defined according to established standards. A cutoff point of 60 was chosen for further analysis. RESULTS: Twenty-three percent of subjects had CKD. Mean age for eGFR <60 was 70.8 +/- 13 and for eGFR >60 was 61.7 +/-14. Frequent co-morbidities were hypertension (75%), GERD (40%), obesity (39%), dyslipidemia (35%), depression (34%), anemia (32%), and diabetes (32%). CONCLUSIONS: Our population is unique in terms of its age and reasons for nursing home admission. Factors associated with CKD in our study include age >65 years old, being male, having a positive history of cardiovascular disease (including congestive heart failure and coronary artery disease,) anemia, polypharmacy, and being obese (BMI >30). Further analysis showed that age and anemia are the strongest factors associated with CKD in our population. Management targeted at CKD risk factor reduction may play a vital role in controlling the magnitude of this disease. Prospective studies to investigate the relationship between gender, a BMI greater than 30, cardiovascular disease, and CKD and its complications are warranted.

6-Bromo-4-[2-(4-fluoro-benzyl-idene)hydrazin-1-yl-idene]-1-methyl-3,4-dihydro-1H-2λ(6),1-benzothia-zine-2,2-dione.

In the title compound, C(16)H(13)BrFN(3)O(2)S, the dihedral angle between the aromatic rings is 2.55 (19)° and the C=N-N=C torsion angle is 178.9 (3)°. The conformation of the thia-zine ring is an envelope, with the S atom displaced by -0.811 (3) Šfrom the mean plane of the other five atoms (r.m.s. deviation = 0.042 Å). In the crystal, C-H⋯O inter-actions link the mol-ecules and weak aromatic π-π stacking between the fluoro-benzene and bromo-benzene rings [centroid-centroid separation = 3.720 (2) Šand inter-planar angle = 2.6 (2)°] is also observed.