PI3K/AKT Signaling Pathway Mediated Autophagy in Oral Carcinoma - A Comprehensive Review.

Oral cancer is the most heterogeneous cancer at clinical and histological levels. PI3K/AKT/mTOR pathway was identified as one of the most commonly modulated signals in oral cancer, which regulates major cellular and metabolic activity of the cell. Thus, various proteins of PI3K/AKT/mTOR pathway were used as therapeutic targets for oral cancer, to design more specific drugs with less off-target toxicity. This review sheds light on the regulation of PI3K/AKT/mTOR, and its role in controlling autophagy and associated apoptosis during the progression and metastasis of oral squamous type of malignancy (OSCC). In addition, we reviewed in detail the upstream activators and the downstream effectors of PI3K/AKT/mTOR signaling as potential therapeutic targets for oral cancer treatment.

Dual modulation of blue-fluorescent carbon dots for simultaneous detection of topotecan and pantoprazole.

This study introduces a novel approach for the simultaneous determination of topotecan (TOP) and pantoprazole (PNT), two drugs whose interaction is critical in clinical applications. The significance of this study originates from the need to understand the pharmacokinetic changes of TOP after PNT administration, which can inform necessary dose adjustments of TOP. To achieve this, nitrogen blue emissive carbon dots (B@NCDs) were produced and employed due to their unique fluorescent properties. When TOP is added to B@NCDs, it exhibits strong native fluorescence at 545 nm without influencing the B@NCDs' fluorescence at 447 nm. Conversely, PNT causes quenching of B@NCDs fluorescence, a property that enables the distinct detection of both drugs. The B@NCDs were fully characterized using different techniques, including ultraviolet-visible spectrophotometry, fluorescence analysis, X-ray diffraction (XRD), transmission electron microscopy (TEM), and FTIR spectroscopy. The proposed method demonstrated excellent linearity, selectivity, and sensitivity, with low detection limits (LOD, S/N = 3); 0.0016 µg mL-1 for TOP and 0.36 µg mL-1 for PNT. Applied to spiked rabbit plasma samples, this method offers a new approach for evaluating the pharmacokinetic interaction between TOP and PNT. It enables the determination of all pharmacokinetic parameters of TOP before and after coadministration with PNT, providing essential insights into whether dose adjustments are necessary. This research not only contributes to the field of drug monitoring and interaction studies but also exemplifies the potential of B@NCDs in complex biological matrices, paving the way for further pharmacological and therapeutic applications.

An electrochemical, and surface studies of synthesized Gemini ionic liquid as corrosion inhibitor for carbon steel in petroleum field.

In this work, we study the efficiency of N1, N3-dibenzyl-N1, N1, N3, N3-tetramethylpropane-1,3-diaminium chloride, as anticorrosion. This compound exhibits potential as a prospective remedy to stop the deterioration of carbon steel caused by corrosion in 1.0 M HCl. The synthesis of this compound is described in a comprehensive manner, and its composition is supported by a range of precise analytical approaches such as elemental analysis, and mass spectroscopy. Based on the findings of the investigation, the synthesized Gemini ionic liquid demonstrates a robust capacity to slow down the rate at which the metal corrodes. The Prepared compound was evaluation by electrochemical and morphology study. Our results revealed that elevating the inhibitor concentration led to an augmentation in inhibition effectiveness, reaching up to 94.8% at 200 ppm of the synthesized compound at 298 K. It is crucial to emphasize that the recently prepared Gemini ionic liquid is consistent with the Langmuir adsorption model and function as a mixed inhibitor, participating in the physio-chemisorption process of adsorption.

Ratiometric Sensing of Azithromycin and Sulfide Using Dual Emissive Carbon Dots: A Turn On-Off-On Approach.

A novel ratiometric fluorescence probe was developed for the determination of azithromycin (AZM) and sulfide ions based on the differential modulation of red emissive carbon dots (R-N@CDs) and blue emissive carbon dots (B-NS@CDs). The addition of sulfide anion selectively quenched the red emission of R-N@CDs while the blue emission of B-NS@CDs unaffected. Upon subsequent introduction of AZM to this R-N@CDs@sulfide system, the quenched red fluorescence was restored. Comprehensive characterization of the CDs was performed using UV-Vis, fluorescence, FTIR spectroscopy, XPS, and TEM. The proposed method exhibited excellent sensitivity and selectivity, with limits of detection of 0.33 µM for AZM and 0.21 µM for sulfide. Notably, this approach enabled direct detection of sulfide without requiring prior modulation of the CDs with metal ions, as is common in other reported methods. The ratiometric probe was successfully applied for the determination of AZM in biological fluids and sulfide in environmental water samples with high selectivity. This work presents the first fluorometric method for the detection of AZM in biological fluids.

Opposing polarity domains provide direction and play a role in cell division in plant growth.

Polar localization of proteins is important for plant growth and development. Identifying the interactors of polarized proteins provides spatial information and cell-type functions. In this issue of Developmental Cell, Wallner et al. (2024) utilize opposing polarity domain proteins to identify interactors and their functions during cell division in Arabidopsis stomata.

Enhanced fluorescent detection of oxaliplatin via BSA@copper nanoclusters: a targeted approach for cancer drug monitoring.

A new fluorescence sensing approach has been proposed for the precise determination of the anti-cancer drug oxaliplatin (Oxal-Pt). This method entails synthesizing blue-emitting copper nanoclusters (CuNCs) functionalized with bovine serum albumin (BSA) as the stabilizing agent. Upon excitation at 360 nm, the resultant probe exhibits emission at 460 nm. Notably, the fluorescence response of BSA@CuNCs substantially increases upon incubation with Oxal-Pt due to multiple binding interactions between the drug and the fluorescent probe. These interactions involve hydrogen bonding, hydrophobic interaction, and the high affinity between the SH groups (cysteine residues of BSA) and platinum (in Oxal-Pt). Consequently, this interaction induces aggregation-induced emission enhancement (AIEE) of BSA@CuNCs. The probe demonstrates a broad response range from 0.08 to 140.0 µM, along with a low detection limit of 20.0 nM, determined based on a signal-to-noise ratio of 3. Furthermore, the probe effectively detects Oxal-Pt in injections, human serum, and urine samples, yielding acceptable results. This study represents a significant advancement in the development of a straightforward and efficient sensor for monitoring platinum-containing anti-cancer drugs during chemotherapy.

Durable graphene-based alkyd nanocomposites for surface coating applications.

Recently, the scientific community's main goal is the long-term sustainability. Vegetable oils are easily accessible, non-depletable, and cost-effective materials. Vegetable oils are used to prepare polymeric alkyd surfaces. Novel and exciting designs of alkyd/graphene nanocomposites have provided eco-friendly thermal stability and protective coating surfaces. This review has briefly described important graphene-based alkyd nanocomposites along with their applications as protective coatings. These alkyd composites have high hydrophobicity, corrosion resistance, and durability. Graphene-based alkyd nanocoatings have many industrial and research interests because of their exceptional thermal and chemical properties. This work introduces an advanced horizon for developing protective nanocomposite coatings. The anti-corrosion properties and coatings' longevity may be improved by combining the synergistic effects of hybrid nanofillers introduced in this work.

Gamma radiation-induced grafting of poly(butyl acrylate) onto ethylene vinyl acetate copolymer for improved crude oil flowability.

Ethylene vinyl acetate (EVA) copolymers are widely employed as pour point depressants to enhance the flow properties of crude oil. However, EVA copolymers have limitations that necessitate their development. This work investigated the modification of EVA via gamma radiation-induced grafting of butyl acrylate (BuA) monomers and the evaluation of grafted EVA as a pour point depressant for crude oil. The successful grafting of poly(butyl acrylate) p(BuA) onto EVA was verified through grafting parameters, FTIR spectroscopy, and 1H NMR spectroscopy. Treating crude oil with 3000 ppm of (EVA)0kGy, (EVA)50kGy, and (1EVA:3BuA)50kGy yielded substantial reductions in pour point of 24, 21, and 21 °C, respectively. Also, rheological characterization demonstrated improving evidenced by a viscosity reduction of 76.20%, 67.70%, and 71.94% at 25 °C, and 83.16%, 74.98%, and 81.53% at 12 °C. At low dosages of 1000 ppm, the EVA-g-p(BuA) exhibited superior pour point reductions compared to unmodified EVA, highlighting the benefit of incorporating p(BuA) side chains. The grafted EVA copolymers with p(BuA) side chains showed excellent potential as crude oil flow improvers by promoting more effective adsorption and co-crystallization with paraffin wax molecules.

Correction to "Anticorrosion Agents for Carbon Steel in Acidic Environments: Synthesis and Quantum Chemical Analysis of New Schiff Base Compounds with Benzylidene".

[This corrects the article DOI: 10.1021/acsomega.3c05790.].

Application of some inorganic metal oxide nanoparticles to control E. coli in raw milk.

Background: Nanoparticles are regarded as magical bullets because of their exclusive features. Recently, the usage of nanoparticles has progressed in almost all aspects of science and technology due to its ability to revolutionize certain fields. In the field of food science and technology, the application of nanoparticles is being researched in many various areas thus provides the dairy industry with a variety of new attitudes for developing the quality, prolong shelf life, ensure the safety and healthiness of foods. Aim: This study aimed to focus on the application of some inorganic metal oxide nanoparticles (zinc oxide (ZnO), magnesium oxide (MgO), and calcium oxide (CaO)) to control E. coli in raw milk and ensure its safety. Methods: The antibacterial action of certain nanoparticles (ZnO, MgO, and CaO) with multiple concentrations (0.1, 0.05, 0.025, 0.0125, 0.006, and 0.003 mg/ml) was evaluated against E. coli strains in ultra heat treated (UHT) milk samples. Also, storage temperature and storage period effects were studied. Results: The findings of the current research revealed that inorganic metal oxide nanoparticles had a significant antibacterial role against E. coli, in the following order; ZnO, MgO, and CaO, respectively. The antibacterial effect of inorganic metal oxide nanoparticles is more noticeable at lower temperatures. Conclusion: Inorganic metal nanoparticles can be used in the food industry for the purpose of the control of E. coli, and extension of the shelf life of dairy products.

The potent effect of selenium nanoparticles: insight into the antifungal activity and preservation of postharvest strawberries from gray mold diseases.

BACKGROUND: Most microorganisms that cause food decay and the lower the shelf life of foods are fungi. Nanotechnologies can combat various diseases and deal with the application of nanomaterial to target cells or tissues. In this study selenium nanoparticles (Se-NPs) were synthesized using ascorbic acid and characterized by ultraviolet-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction and zeta potential. The different concentrations of As/Se-NPs were tested against various fungi, including Alternaria linicola, Alternaria padwickii, Botrytis cinerea, Bipolaris sp., Cephalosporium acremonium, Fusarium moniliform and Fusarium semitectum. This study tested the influence of coated As/Se-NPs on healthy strawberry fruits and those infected with Botrytis cinerea during 16 days of storage, with regard to shelf life, decay percentage, weight loss, total titratable acidity percentage, total soluble solids content (TSS) and anthocyanin content. RESULTS: Energy-dispersive X-ray analysis showed only two elements: selenium and oxygen. TEM images showed that the nanoparticles ranged in size between 26 to 39 nm and were rhombohedral in shape. Se-NPs showed antifungal activity against all tested fungi, the most effective being against Botrytis cinerea, Cephalosporium acremonium and Fusarium semitectum. During storage periods of strawberries fruits coated with As/Se-NPs, the shelf life was increased, and the number of decaying fruits was less than in control (uncoated) and coated infected fruits. The decline in weight loss was lower in coated fruits than in control fruits. CONCLUSION: These findings demonstrated that As/Se-NPs could effectively maintain the postharvest quality of strawberries, even when the fruit was infected with B. cinerea. © 2024 Society of Chemical Industry.

Level of Awareness about Air Pollution among Decision-makers in Jordan: Unveiling Important COPD Etiology

Purpose: The complete awareness of policymakers about air pollution can play a significant role in dealing with this environmental threat. This study aimed to examine the awareness and perception among the policymakers regarding air pollution in Jordan. Methods: This is a cross-sectional study conducted in Jordan. The participants included in this study were governmental and non-governmental officials from different sectors. An interview and questionnaire were used to examine the extent of knowledge of these decision-makers regarding air pollution types, sources, and threats. Results: Most participants acknowledged that air pollution in Jordan was a huge problem. Most participants (90%) were familiar with the term air pollution, and regularly read about different contaminants that cause air pollution. However, most of the participants had a low level of knowledge about air contaminant types in Jordan. The least known pollutants were PM2.5 (Particulate Matter 2.5 microns in width) and PM10 (Particulate Matter 10 microns in width). Only 7.5% of the participants knew about PM2.5, while 12.5% knew about PM10. Conclusion: Policymakers have the full authority to initiate and implement policies that intend to limit air pollution. Their complete awareness of air pollution can result in conducting certain protocols to approve new policies and legislations that can improve the air quality in Jordan. Unfortunately, no previous studies were conducted to analyze policymakers’ knowledge regarding air pollution in Jordan, and this study’s results hoped to reflect the importance of air pollutants and their greater significance on public health. (AU)

Forensic investigation of carcass decomposition and dipteran fly composition over the summer and winter: a comparative analysis of indoor versus outdoor at a multi-story building.

This study aimed to explore the rate of decomposition of rabbit carcasses and the succession pattern of the associated dipteran flies outdoor, indoor, and on the roof of a 4-story building during the summer and winter. A total of 6,069 flies were recorded, with 30.91% reported as 2 waves outdoor and on the roof in the summer and 69.09% as 4 waves outdoor in the winter. The roof showed the most flies in the summer but the least in the winter, whereas the outdoor showed the most in the winter but the least in the summer. The ground and first floors showed the most indoor flies, while the second and third floors showed the least in both seasons. Indoor carcasses decomposed slower than those outdoor, and those on the second and third floors decomposed slower than those on the ground and first floors. Ten fly species from 8 families were identified in the winter, compared to 6 from 5 families in the summer. The most abundant species was Musca domestica Linnaeus (Muscidae) on the roof in the summer, while it was Chrysomya albiceps (Wiedemannn) (Calliphoridae) outdoor in the winter. The rare species (singletons) were Musca sp. (Muscidae) and Megaselia scalaris (Loew) (Phoridae) on the first floor in both seasons, Scaptomyza pallida (Zetterstedt) (Drosophilidae) on the ground floor in the summer, and Atherigona orientalis Schiner (Muscidae) outdoor in the winter. These data highlight the variance in carcass decomposition and fly composition across outdoor, indoor, and the roof of human dwellings, which could be of forensic importance.

Multi-Institutional Audit of FLASH and Conventional Dosimetry With a 3D Printed Anatomically Realistic Mouse Phantom.

PURPOSE: We conducted a multi-institutional dosimetric audit between FLASH and conventional dose rate (CONV) electron irradiations by using an anatomically realistic 3-dimensional (3D) printed mouse phantom. METHODS AND MATERIALS: A computed tomography (CT) scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene (∼1.02 g/cm3) and polylactic acid (∼1.24 g/cm3) simultaneously to simulate soft tissue and bone densities, respectively. The lungs were printed separately using lightweight polylactic acid (∼0.64 g/cm3). Hounsfield units (HU), densities, and print-to-print stability of the phantoms were assessed. Three institutions were each provided a phantom and each institution performed 2 replicates of irradiations at selected anatomic regions. The average dose difference between FLASH and CONV dose distributions and deviation from the prescribed dose were measured with radiochromic film. RESULTS: Compared with the reference CT scan, CT scans of the phantom demonstrated mass density differences of 0.10 g/cm3 for bone, 0.12 g/cm3 for lung, and 0.03 g/cm3 for soft tissue regions. Differences in HU between phantoms were <10 HU for soft tissue and bone, with lung showing the most variation (54 HU), but with minimal effect on dose distribution (<0.5%). Mean differences between FLASH and CONV decreased from the first to the second replicate (4.3%-1.2%), and differences from the prescribed dose decreased for both CONV (3.6%-2.5%) and FLASH (6.4%-2.7%). Total dose accuracy suggests consistent pulse dose and pulse number, although these were not specifically assessed. Positioning variability was observed, likely due to the absence of robust positioning aids or image guidance. CONCLUSIONS: This study marks the first dosimetric audit for FLASH using a nonhomogeneous phantom, challenging conventional calibration practices reliant on homogeneous phantoms. The comparison protocol offers a framework for credentialing multi-institutional studies in FLASH preclinical research to enhance reproducibility of biologic findings.

Ultrasensitive fluorometric determination of aluminum using the CoFe2O4 NPs/SDS/oxine system with the aid of ultrasound waves.

In this study, we present a thoughtful integration of a dispersive solid-phase sorbent and oxine for the ultrasensitive and highly selective determination of Al3+ ions. Cobalt ferrite nanoparticles (CoFe2O4 NPs) modified with oxine were employed to facilitate the pre-concentration and estimation of Al3+, forming highly fluorescent chelate. The modification process included the assistance of sodium dodecyl sulfate (SDS) and sonication. The results indicated that the fluorescence intensity of Al3+-oxine/SDS@CoFe2O4 NPs surpassed that of Al3+-oxine alone. The confirmation of the successful functionalization of CoFe2O4 NPs with oxine was established through various techniques. Under optimal conditions, the fluorescence intensity exhibited a positive correlation with increasing concentrations of Al3+ within the range of 0.029-600 ng mL-1, achieving a detection limit of 0.0087 ng mL-1 based on signal to noise ratio 3 : 1. The developed method was effectively applied to the determination of Al3+ in drinking water samples, yielding recoveries in the range of 97.19% to 103.13%, with a relative standard deviation (RSD%) not exceeding 3.78%.

Flawless polyaniline coating for preservation and corrosion protection of ancient steel spearheads: an archaeological study from military museum, Al-Qala, Egypt.

The purpose of this research was to examine the viability of applying a flawless polyaniline coating on steel spearheads to preserve them and protect them from corrosion. The spearpoints, thought to be archaeologically significant, were acquired from the Military Museum in Al-Qala, Egypt. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy were used to characterize the spearheads chemical composition and microstructure (EDX). The spearheads were determined to be constructed of steel and to have a coating of ferric oxide and other corrosion products on their exteriors. After that, a flawless polyaniline coating was electrochemically deposited onto the spearpoints in a way that was both quick and cheap. Many types of corrosion tests, such as electrochemical impedance spectroscopy and potentiodynamic polarization (PDP) readings, were used to determine the coating's effectiveness. The steel spearheads' findings revealed a significant improvement in their resistance to corrosion after being coated with flawless polyaniline. The coating served as a barrier, blocking out water and other corrosive substances and slowing the buildup of corrosion byproducts on the spearpoints. In conclusion, our research shows that a flawless polyaniline coating may be an effective anti-corrosion treatment for ancient steel artifacts. The approach is straightforward, cheap, and readily scalable for massive conservation efforts.

Innovative Encapsulation Strategies for Food, Industrial, and Pharmaceutical Applications.

Bioactive metabolites obtained from fruits and vegetables as well as many drugs have various capacities to prevent or treat various ailments. Nevertheless, their efficiency, in vivo, encounter many challenges resulting in lower efficacy as well as different side effects when high doses are used resulting in many challenges for their application. Indeed, demand for effective treatments with no or less unfavorable side effects is rising. Delivering active molecules to a particular site of action within the human body is an example of targeted therapy which remains a challenging field. Developments of nanotechnology and polymer science have great promise for meeting the growing demands of efficient options. Encapsulation of active ingredients in nano-delivery systems has become as a vitally tool for protecting the integrity of critical biochemicals, improving their delivery, enabling their controlled release and maintaining their biological features. Here, we examine a wide range of nano-delivery techniques, such as niosomes, polymeric/solid lipid nanoparticles, nanostructured lipid carriers, and nano-emulsions. The advantages of encapsulation in targeted, synergistic, and supportive therapies are emphasized, along with current progress in its application. Additionally, a revised collection of studies was given, focusing on improving the effectiveness of anticancer medications and addressing the problem of antimicrobial resistance. To sum up, this paper conducted a thorough analysis to determine the efficacy of encapsulation technology in the field of drug discovery and development.

Rapid Switching of a C-Series Linear Accelerator Between Conventional and Ultrahigh-Dose-Rate Research Mode With Beamline Modifications and Output Stabilization.

PURPOSE: In this study, a C-series linear accelerator was configured to enable rapid and reliable conversion between the production of conventional electron beams and an ultrahigh-dose-rate (UHDR) electron beamline to the treatment room isocenter for FLASH radiation therapy. Efforts to tune the beam resulted in a consistent, stable UHDR beamline. METHODS AND MATERIALS: The linear accelerator was configured to allow for efficient switching between conventional and modified electron output modes within 2 minutes. Additions to the air system allow for retraction of the x-ray target from the beamline when the 10 MV photon mode is selected. With the carousel set to an empty port, this grants access to the higher current pristine electron beam normally used to produce clinical photon fields. Monitoring signals related to the automatic frequency control system allows for tuning of the waveguide while the machine is in a hold state so a stable beam is produced from the initial pulse. A pulse counting system implemented on an field-programmable gate array-based controller platform controls the delivery to a desired number of pulses. Beam profiles were measured with Gafchromic film. Pulse-by-pulse dosimetry was measured using a custom electrometer designed around the EDGE diode. RESULTS: This method reliably produces a stable UHDR electron beam. Open-field measurements of the 16-cm full-width, half-maximum gaussian beam saw average dose rates of 432 Gy/s at treatment isocenter. Pulse overshoots were limited and ramp up was eliminated. Over the last year, there have been no recorded incidents that resulted in machine downtime due to the UHDR conversions. CONCLUSIONS: Stable 10 MeV UHDR beams were generated to produce an average dose rate of 432 Gy/s at the treatment room isocenter. With a reliable pulse-counting beam control system, consistent doses can be delivered for FLASH experiments with the ability to accommodate a wide range of field sizes, source-to-surface distances, and other experimental apparatus that may be relevant for future clinical translation.

Incremental diagnostic and prognostic utility of left atrial deformation in heart failure using speckle tracking echocardiography.

Left atrium (LA) is a very important component of cardiovascular performance. The assessment of LA function has gathered the interest with expanding research supporting the utility as a biomarker for outcomes in heart failure (HF). Echocardiography is the main imaging modality which helps in a qualitative and quantitative assessment of the LA size and function. Recent advances in probe technology and software analysis have provided a better understanding of LA anatomy, physiology, pathology, and function. A variety of parameters have been defined as markers of LA function but there is no single parameter that best defines LA function. Speckle tracking echocardiography-derived analysis of LA deformation provides a window on all phases of LA function (reservoir, conduit, and booster pump). There is accumulative published data that supported the diagnostic and prognostic values of LA deformation integration during echo assessment of LA in HF. This review article summarized the clinical utility of LA deformation that may help in prediction, diagnosis, categorization, risk stratification, and guiding the proper selection of therapy in HF patients in daily practice.

Surface engineering of carbon microspheres with nanoceria wrapped on MWCNTs: a dual electrocatalyst for simultaneous monitoring of molnupiravir and paracetamol.

In the present study, nanoceria-decorated MWCNTs (CeNPs@MWCNTs) were synthesized using a simple and inexpensive process. Molnupiravir (MPV) has gained considerable attention in recent years due to the infection of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Since some people infected with COVID-19 experience fever and headaches, paracetamol (PCM) has been prescribed to relieve these symptoms. Therefore, there is an urgent need to monitor and detect these drugs simultaneously in pharmaceutical and biological samples. In this regard, we developed a novel sensor based on nanoceria-loaded MWCNTs (CeNPs@MWCNTs) for simultaneous monitoring of MPV and PCM. The incorporation of CeNPs@MWCNTs electrocatalyst into a glassy carbon microsphere fluorolube oil paste electrode (GCMFE) creates more active sites, which increase the surface area, electrocatalytic ability, and electron transfer efficiency. Interestingly, CeNPs@MWCNTs modified GCMFE demonstrated excellent detection limits (6.0 nM, 8.6 nM), linear ranges (5.0-5120 nM, 8.0-4162 nM), and sensitivities (78.6, 94.3 µA µM-1 cm-2) for simultaneous detection of MPV and PCM. The developed CeNPs@MWCNTs electrocatalyst modified GCMFE exhibited good repeatability, anti-interference capability, stability, and real-time analysis with good recovery results, which clearly indicates that it can be used for real-time industrial applications.