Synthesis and Structural Studies of peri-Substituted Acenaphthenes with Tertiary Phosphine and Stibine Groups.

Two mixed peri-substituted phosphine-chlorostibines, Acenap(PiPr2)(SbPhCl) and Acenap(PiPr2)(SbCl2) (Acenap = acenaphthene-5,6-diyl) reacted cleanly with Grignard reagents or nBuLi to give the corresponding tertiary phosphine-stibines Acenap(PiPr2)(SbRR') (R, R' = Me, iPr, nBu, Ph). In addition, the Pt(II) complex of the tertiary phosphine-stibine Acenap(PiPr2)(SbPh2) as well as the Mo(0) complex of Acenap(PiPr2)(SbMePh) were synthesised and characterised. Two of the phosphine-stibines and the two metal complexes were characterised by single-crystal X-ray diffraction. The peri-substituted species act as bidentate ligands through both P and Sb atoms, forming rather short Sb-metal bonds. The tertiary phosphine-stibines display through-space J(CP) couplings between the phosphorus atom and carbon atoms bonded directly to the Sb atom of up to 40 Hz. The sequestration of the P and Sb lone pairs results in much smaller corresponding J(CP) being observed in the metal complexes. QTAIM (Quantum Theory of Atoms in Molecules) and EDA-NOCV (Energy Decomposition Analysis employing Naturalised Orbitals for Chemical Valence) computational techniques were used to provide additional insight into a weak n(P)→σ*(Sb-C) intramolecular bonding interaction (pnictogen bond) in the phosphine-stibines.

Synthetic and Structural Study of peri-Substituted Phosphine-Arsines.

A series of phosphorus-arsenic peri-substituted acenaphthene species have been isolated and fully characterised, including single crystal X-ray diffraction. Reactions of EBr3 (E = P, As) with iPr2PAcenapLi (Acenap = acenaphthene-5,6-diyl) afforded the thermally stable peri-substitution supported donor-acceptor complexes, iPr2PAcenapEBr23 and 4. Both complexes show a strong P→E dative interaction, as observed by X-ray crystallography and 31P NMR spectroscopy. DFT calculations indicated the unusual As∙∙∙As contact (3.50 Å) observed in the solid state structure of 4 results from dispersion forces rather than metallic interactions. Incorporation of the excess AsBr3 in the crystal structure of 3 promotes the formation of the ion separated species [iPr2PAcenapAsBr]+Br- 5. A decomposition product 6 containing the rare [As6Br8]2- heterocubane dianion was isolated and characterised crystallographically. The reaction between iPr2PAcenapLi and EtAsI2 afforded tertiary arsine (BrAcenap)2AsEt 7, which was subsequently lithiated and reacted with PhPCl2 and Ph2PCl to afford cyclic PhP(Acenap)2AsEt 8 and acyclic EtAs(AcenapPPh2)2 9.

On the activation of PhICl2 with pyridine.

It has been previously proposed that pyridines can activate PhICl2 by displacing a chloride and forming the [PhI(Pyr)(Cl)]+ cation as a reactive intermediate. Here we show that pyridine does not displace chloride, but rather forms a weak complex with the iodine via halogen bonding along the C-I bond axis. This interaction is interrogated by NMR, structural, charge density, and theoretical investigations, which all indicate that pyridine does not activate PhICl2 as proposed.

Polymorphism, Weak Interactions and Phase Transitions in Chalcogen-Phosphorus Heterocycles.

A series of P-E-containing heterocycles (E=chalcogen) with aromatic backbones were synthesised and characterised by single-crystal and powder XRD, microanalysis and mass spectrometry. Solution- and solid-state 31 P and 77 Se NMR spectroscopy revealed significant differences between the NMR parameters in solution and in the solid state, related to conformational changes in the molecules. Many compounds were shown to exhibit a number of different polymorphic structures (identified by single-crystal XRD), although the bulk material studied by solid-state NMR spectroscopy often contained just one major polymorph. For the unoxidised heterocycles, the presence of weak intermolecular J couplings was also investigated by DFT calculations.

Structural diversity of bimetallic rhodium and iridium half sandwich dithiolato complexes.

The synthesis of a range of rhodium(iii) and iridium(iii) half sandwich complexes with aryl dithiolato ligands of varying geometry and flexibility are reported. These include dinuclear [Cp*M(S-R-S)]2 complexes 3b and 4b, M = Rh, Ir; S-R-S = naphthalene-1,8-dithiolate (b) and four dinuclear complexes bearing bridging dithiolate ligands [(Cp*M)2(µ2-Cl)(µ2-S-R-S)]Cl 3c, 4c, 5b, 6b, M = Rh, Ir; S-R-S = naphthalene-1,8-dithiolate (b) or acenaphthene-5,6-dithiolate (c). The introduction of a less rigid biphenyl dithiolate backbone resulted in the tetranuclear dicationic complex [(Cp*Rh)4(S-R-S)3]Cl2 (3d), S-R-S = biphenyl-2,2'-dithiolate (d) with dithiolate ligands in two different bridging modes. All new complexes were fully characterised by multinuclear NMR, IR, Raman and MS spectroscopy and single crystal X-ray diffraction.

Unusual intermolecular "through-space" j couplings in p-se heterocycles.

Solid-state NMR spectra of new P-Se heterocycles based on peri-substituted naphthalene motifs show the presence of unusual J couplings between Se and P. These couplings are between atoms in adjacent molecules and occur "through space", rather than through conventional covalent bonds. Experimental measurements are supported by relativistic DFT calculations, which confirm the presence of couplings between nonbonded atoms, and provide information on the pathway of the interaction. This observation improves the understanding of J couplings and offers insight into the factors that affect crystal packing in solids, for future synthetic exploitation.

Structural, spectroscopic and computational examination of the dative interaction in constrained phosphine-stibines and phosphine-stiboranes.

A series of phosphine-stibine and phosphine-stiborane peri-substituted acenaphthenes containing all permutations of pentavalent groups -SbCln Ph4-n (5-9), as well as trivalent groups -SbCl2 , -Sb(R)Cl, and -SbPh2 (2-4, R=Ph, Mes), were synthesised and fully characterised by single crystal diffraction and multinuclear NMR spectroscopy. In addition, the bonding in these species was studied by DFT computational methods. The P-Sb dative interactions in both series range from strongly bonding to non-bonding as the Lewis acidity of the Sb acceptor is decreased. In the pentavalent antimony series, a significant change in the P-Sb distance is observed between -SbClPh3 and -SbCl2 Ph2 derivatives 6 and 7, respectively, consistent with a change from a bonding to a non-bonding interaction in response to relatively small modification in Lewis acidity of the acceptor. In the Sb(III) series, two geometric forms are observed. The P-Sb bond length in the SbCl2 derivative 2 is as expected for a normal (rather than a dative) bond. Rather unexpectedly, the phosphine-stiborane complexes 5-9 represent the first examples of the σ(4) P→σ(6) Sb structural motif.

Peri-substituted phosphorus-tellurium systems-an experimental and theoretical investigation of the P···Te through-space interaction.

A series of peri-substituted phosphorus-tellurium systems R'Te-Acenap-PR2 (R' = Ph, p-An, Nap, Mes, Tip; Acenap = acenaphthene-5,6-diyl (-C12H8); R = (i)Pr, Ph) exhibiting large "through-space" spin-spin coupling constants and the "onset" of three-center four-electron type interactions is presented. The influence of the substituents at the phosphorus and tellurium atoms as well as their behavior upon oxidation (with S, Se) or metal-coordination (Pt, Au) is discussed using NMR spectroscopy, single-crystal X-ray diffraction, and advanced density functional theory studies including NBO, AIM, and ELI-D analyses.

Main group tellurium heterocycles anchored by a P(2)(V)N(2) scaffold and their sulfur/selenium analogues.

A comprehensive investigation of reactions of alkali-metal derivatives of the ditelluro dianion [TePV(NtBu)(µ-NtBu)]22­ (L2­, E = Te) with p-block element halides produced a series of novel heterocycles incorporating P2VN2 rings, tellurium, and group 13­16 elements. The dianion engages in Te,Te'-chelation to the metal center in Ph2Ge and R2Sn (R = tBu, nBu, Ph) derivatives; similar behavior was noted for group 14 derivatives of L2­ (E = S, Se). In the case of group 13 trihalides MCl3 (M = Ga, In), neutral spirocyclic complexes (L)M[NtBu(Te)PV(µ-NtBu)2PIIIN(H)tBu)] (M = Ga, In) comprised of a Te,Te'-chelated ligand L2­ and a N,Te-bonded ligand resulting from loss of Te and monoprotonation were obtained. In reactions with RPCl2 (R = tBu, Ad, iPr2N) a significant difference was observed between Se- and S-containing systems. In the former case, Se,Se'-chelated derivatives were formed in high yields, whereas the N,S-chelated isomers predominated for sulfur. All complexes were characterized by multinuclear (1H, 31P, 77Se, 119Sn, and 125Te) NMR spectroscopy; this technique was especially useful in the analysis of the mixture of (L)(Se) and (L)(SeSe) obtained from the reaction of Se2Cl2 with L2­ (E = Te). Single-crystal X-ray structures were obtained for the spirocyclic In complex (9), (L)GePh2 (E = Te, 10), (L)SntBu2 (E = Te, 12a); E = Se, 12aSe, E = S, 12aS) and (L)(µ-SeSe) (E = Te, 16).

Spirocyclic, macrocyclic and ladder complexes of coinage metals and mercury with dichalcogeno P2N2-supported anions.

Metathetical reactions of alkali-metal derivatives of the dianion [(t)BuN(Se)P(µ-N(t)Bu)2P(Se)N(t)Bu](2-) ((2Se2-)) with Ag(NHC)Cl, Ag[BF4], AuCl(THT) and HgCl2, as well as the reaction of 2S(2-) with AuCl(THT) were investigated. The observed products all incorporate the monoprotonated ligands 2SeH(-) or 2SH(-) in a variety of structural arrangements around the metal centres, including tetrameric and trimeric macrocycles [Ag and Au (E = Se)], a ladder (Au, E = S) and a spirocycle (Hg); the ladder contains both the dianion 2S(2-) and the monoanion 2SH(-) as ligands linking three Au2 units. All complexes have been characterised in the solid state by single crystal X-ray analyses and in solution by multinuclear ((1)H, (31)P and (77)Se) NMR spectra.

Sodium and rhodium complexes of a spirocyclic Te5 dianion supported by P2N2 rings.

Reactions of the dianion [Te((t)BuN)P(µ-N(t)Bu)2P(N(t)Bu)Te](2-) with I2 or [Cp*RhCl2]2 unexpectedly produced complexes of the novel spirocyclic Te5 dianion [{(t)BuN(Te)P(µ-N(t)Bu)2P(Te)N(t)Bu}2µ-Te](2-), which is N,N'-coordinated to two Na(+) ions in the disodium derivative and adopts a Te,Te',Te''-bonding mode in the Cp*Rh complex.

Conformational dependence of through-space tellurium-tellurium spin-spin coupling in peri-substituted bis(tellurides).

Three related series of peri-substituted bis(tellurides) bearing naphthalene, acenaphthene and acenaphthylene backbones (Nap/Acenap/Aceyl(TeY)2 (Nap = naphthalene-1,8-diyl N; Acenap = acenaphthene-5,6-diyl A; Aceyl = acenaphthylene-5,6-diyl Ay; Y = Ph 1; Fp 2; Tol 3; An-p- 4; An-o- 5; Tp 6; Mes 7; Tip 8) have been synthesised and their solid-state structures determined by X-ray crystallography. Molecular conformations were classified as a function of the two C9-C-Te-C(Y) dihedral angles (θ); in the solid all members adopt AB or CCt configurations, with larger Te(aryl) moieties exclusively imposing the CCt variant. Exceptionally large J((125)Te,(125)Te) spin-spin coupling constants between 3289-3848 Hz were obtained for compounds substituted by bulky Te(aryl) groups, implying these species are locked in a CCt-type conformation. In contrast, compounds incorporating smaller Te(aryl) moieties are predicted to be rather dynamic in solution and afford much smaller J values (2050-2676 Hz), characteristic of greater populations of AB conformers with lower couplings. This conformational dependence of through-space coupling is supported by DFT calculations.

A modular approach for the synthesis of nanometer-sized polynitroxide multi-spin systems.

The synthesis of rigid symmetric polyradical model systems with inter-spin distances between 1.4 and 4 nm and their room temperature continuous wave (CW) EPR spectra are reported. Conditions for attachment of the spin-label via esterification have been optimized on the direct synthesis of polyradicals from commercially available polyphenols and the carboxylic acid functionalized nitroxide TPC. A common synthetic protocol utilizing 4-hydroxy-4'-iodobiphenyl as a key building block has been used to synthesize an equilateral biradical and a triradical in only two steps from commercially available starting materials. The first synthesis of a tetraradical based upon an adamantane core bearing six equivalent nitroxide-nitroxide distances is also reported. These systems are very promising candidates for studying multi-spin effects in pulsed EPR distance measurements.

Sterically encumbered tin and phosphorus peri-substituted acenaphthenes.

A group of sterically encumbered peri-substituted acenaphthenes have been prepared, containing tin moieties at the 5,6-positions in 1-3 ([Acenap(SnR3)2], Acenap = acenaphthene-5,6-diyl; R3 = Ph3 (1), Me3 (2); [(Acenap)2(SnMe2)2] (3)) and phosphorus functional groups at the proximal peri-positions in 4 and 5 ([Acenap(PR2)(P(i)Pr2)] R2 = Ph2 (4), Ph((i)Pr) (5)). Bis(stannane) structures 1-3 are dominated by repulsive interactions between the bulky tin groups, leading to peri-distances approaching the sum of van der Waals radii. Conversely, the quasi-linear CPh-P···P three-body fragments found in bis(phosphine) 4 suggest the presence of a lp(P)-σ*(P-C) donor-acceptor 3c-4e type interaction, supported by a notably short intramolecular P···P distance and notably large JPP through-space coupling (180 Hz). Severely strained bis(sulfides) 4-S and 5-S, experiencing pronounced in-plane and out-of-plane displacements of the exocyclic peri-bonds, have also been isolated following treatment of 4 and 5 with sulfur. The resulting nonbonded intramolecular P···P distances, ∼4.05 Å and ∼12% longer than twice the van der Waals radii of P (3.60 Å), are among the largest ever reported peri-separations, independent of the heteroatoms involved, and comparable to the distance found in 1 containing the larger Sn atoms (4.07 Å). In addition we report two metal complexes with square planar [(4)PtCl2] (4-Pt) and octahedral cis-[(4)Mo(CO)4] (4-Mo) geometries. In both complexes the bis(phosphine) backbone is distorted, but notably less so than in bis(sulfide) 4-S. All compounds were fully characterized, and except for bis(phosphine) 5, crystal structures were determined.

Synthetic and structural study of the coordination chemistry of a peri-backbone-supported phosphino-phosphonium salt.

Coordination chemistry of an acenaphthene peri-backbone-supported phosphino-phosphonium chloride (1) was investigated, revealing three distinct modes of reactivity. The reaction of 1 with Mo(CO)4(nor) gives the Mo(0) complex [(1)Mo(CO)4Cl] (2), in which the ligand 1 exhibits monodentate coordination through the phosphine donor and the P-P bond is retained. PtCl2(cod) reacts with the chloride and triflate salts of 1 to form a mononuclear complex [(1Cl)PtCl2] (3) and a binuclear complex [((1Cl)PtCl)2][2TfO] (4), respectively. In both of these complexes, the platinum center adds across the P-P bond, and subsequent chloride transfer to the phosphenium center results in phosphine-chlorophosphine bidentate coordination. [((1)PdCl)2] (5) was isolated from the reaction of 1 and Pd2(dba)3 (dba = dibenzylideneacetone). Oxidative addition to palladium(0) results in a heteroleptic phosphine bridging phosphide coordination to the Pd(II) center. In addition, reaction of 1 with BH3·SMe2 leads to the bis(borane) adduct of the corresponding mixed tertiary/secondary phosphine (6), with BH3 acting as both a reducing agent and a Lewis acid. The new compounds were fully characterized, including X-ray diffraction. The ligand properties of 1 and related bonding issues are discussed with help of DFT computations.

Reactivity profile of a peri-substitution-stabilized phosphanylidene-phosphorane: synthetic, structural, and computational studies.

The reactions of peri-substitution-stabilized phosphanylidene-phosphorane 1 with [AuCl(tht)] or [PtCl2(cod)] afford binuclear complexes [((1)(AuCl)2)2] 2 and [((1)(PtCl2))2] 3, in which four electrons of the ligand are used in bonding to two metal atoms in the bridging arrangement. Reactions of 1 with [Mo(CO)4(nbd)] or (RhCl2Cp*)2 afford mononuclear complexes [(1)2Mo(CO)4] 4 and [(1)RhCl2Cp*] 5, in which two electrons of the ligand are used to form terminal complexes. Formation of these complexes disrupts the negative hyperconjugation at the P-P bond to various extents, which is mirrored by variations in their P-P bond distances (2.179(4)-2.246(4) Å). The P-P bond is ruptured upon formation of Pd diphosphene complex 6, which is likely to proceed through a phosphinidene intermediate. In air, 1 is fully oxidized to phosphonic acid 7. Reactions of 1 with chalcogens under mild conditions generally afford mixtures of products, from which the trithionated 8, dithionated 9, diselenated 10, and monotellurated 11 species were isolated. The bonding in the chalcogeno derivatives is discussed using DFT (B3LYP) and natural bond orbital analysis, which indicate a contribution from dative bonding in 8-10. The buttressing effect of the peri backbone is shown to be an essential factor in the formation of the single push-double-pull bis(borane) 13. This is demonstrated experimentally through a synthesis parallel to that used to make 13, but lacking the backbone, which leads to different products. The P-P bond distances in the reported products, as well as additional species, are correlated with Wiberg bond indices, showing very good agreement for a variety of bonding modes, including the negative hyperconjugation.

Geometrically enforced donor-facilitated dehydrocoupling leading to an isolable arsanylidine-phosphorane.

A proximate Lewis basic group facilitates the mild dehydrogenative P-As intramolecular coupling in the phosphine-arsine peri-substituted acenaphthene 3, affording thermally and hydrolytically stable arsanylidine-phosphorane 4 with a sterically accessible two-coordinate arsenic atom. The formation of 4 is thermoneutral due to the dehydrogenation being concerted with the donor coordination. Reaction of 4 with a limited amount of oxygen reveals arsinidene-like reactivity via formation of cyclooligoarsines, supporting the formulation of the bonding in 4 as base-stabilized arsinidene R3P→AsR.

Probing interactions through space using spin-spin coupling.

The series of eight 5-(TeY)-6-(SePh)acenaphthenes (Y = Fp (2), Tol (3), An-p (4), An-o (5), Tp (6), Mes (7), Tip (8), Nap (9)) were prepared and structurally characterised by X-ray crystallography, solution and solid-state NMR spectroscopy and density functional theory (DFT/B3LYP) calculations. All members of the series, except 5, adopt a BA type configuration comparable to the parent compound 1 (Y = Ph), aligning the Te-C(Y) bond along the mean acenaphthene plane and promoting a nonbonded Se···Te-C(Y) 3c-4e type interaction to form to stabilise the molecule (G-dependence). 5 (Y = An-o) adopts a BC type conformation in the solid but DFT calculations show this optimises to BA. Indication of strong through-space peri-interactions between Te and Se are observed in the (77)Se and (125)Te NMR spectra, with J(Te,Se) spin-spin coupling constants (SSCCs) in the range -688 to -748 Hz. Evidence supporting the presence of this interaction was also found in solid-state NMR spectra of some of the compounds which exhibit an indirect spin-spin coupling on the same order of magnitude as observed in solution. In order to quantify the steric bulk of the aryl groups (Y), we introduce the crystallographic steric parameter (θ), the cone angle measured from the furthest H atoms lying on the edges of the cone to the Te atom located at its vertex. Modification to Y has no apparent influence over the conformation of the molecule, the degree of molecular distortion occurring in the acenaphthene backbone or the extent of 3c-4e interaction; peri-distances for all eight compounds are within 0.08 Å and no apparent correlation is observed between the steric bulk of Y (θ) and the (77)Se chemical shifts or J(Te,Se) SSCCs. In contrast, a good correlation is found between θ and (125)Te chemical shifts. DFT calculations performed on all members of the series confirm the comparable covalent bonding between Te and Se in the series, with WBIs of ca. 0.1 obtained. Natural bond orbital analysis shows a noticeable donor-acceptor interaction between a p-type lone pair on Se and a σ*(Te-C) antibonding orbital, confirming the onset of 3c-4e type bonding.

Isolatable organophosphorus(III)-tellurium heterocycles.

A new structural arrangement Te3 (RP(III) )3 and the first crystal structures of organophosphorus(III)-tellurium heterocycles are presented. The heterocycles can be stabilized and structurally characterized by the appropriate choice of substituents in Tem (P(III) R)n (m=1: n=2, R=OMes* (Mes*=supermesityl or 2,4,6-tri-tert-butylphenyl); n=3, R=adamantyl (Ad); n=4, R=ferrocene (Fc); m=n=3: R=trityl (Trt), Mesor by the installation of a P(V) 2 N2 anchor in RP(III) [TeP(V) (tBuN)(µ-NtBu)]2 (R=Ad, tBu).

Large yet flexible N-heterocyclic carbene ligands for palladium catalysis.

A straightforward and scalable eight-step synthesis of new N-heterocyclic carbenes (NHCs) has been developed from inexpensive and readily available 2-nitro-m-xylene. This process allows for the preparation of a novel class of NHCs coined ITent ("Tent" for "tentacular") of which the well-known IMes (N,N'-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), IPr (N,N'-bis(2,6-di(2-propyl)phenyl)imidazol-2-ylidene) and IPent (N,N'-bis(2,6-di(3-pentyl)phenyl)imidazol-2-ylidene) NHCs are the simplest and already known congeners. The synthetic route was successfully used for the preparation of three members of the ITent family: IPent (N,N'-bis(2,6-di(3-pentyl)phenyl)imidazol-2-ylidene), IHept (N,N'-bis(2,6-di(4-heptyl)phenyl)imidazol-2-ylidene) and INon (N,N'-bis(2,6-di(5-nonyl)phenyl)imidazol-2-ylidene). The electronic and steric properties of each NHC were studied through the preparation of both nickel and palladium complexes. Finally the effect of these new ITent ligands in Pd-catalyzed Suzuki-Miyaura and Buchwald-Hartwig cross-couplings was investigated.