Measurement of the Spin Absorption Anisotropy in Lateral Spin Valves.

The spin absorption process in a ferromagnetic material depends on the spin orientation relative to the magnetization. Using a ferromagnet to absorb the pure spin current created within a lateral spin valve, we evidence and quantify a sizable orientation dependence of the spin absorption in Co, CoFe, and NiFe. These experiments allow us to determine the spin-mixing conductance, an elusive but fundamental parameter of the spin-dependent transport. We show that the obtained values cannot be understood within a model considering only the Larmor, transverse decoherence, and spin diffusion lengths, and rather suggest that the spin-mixing conductance is actually limited by the Sharvin conductance.

Highly Efficient Spin-to-Charge Current Conversion in Strained HgTe Surface States Protected by a HgCdTe Layer.

We report the observation of spin-to-charge current conversion in strained mercury telluride at room temperature, using spin pumping experiments. We show that a HgCdTe barrier can be used to protect the HgTe from direct contact with the ferromagnet, leading to very high conversion rates, with inverse Edelstein lengths up to 2.0±0.5 nm. The influence of the HgTe layer thickness on the conversion efficiency is found to differ strongly from what is expected in spin Hall effect systems. These measurements, associated with the temperature dependence of the resistivity, suggest that these high conversion rates are due to the spin momentum locking property of HgTe surface states.

Giant magnetoresistance in lateral metallic nanostructures for spintronic applications.

In this letter, we discuss the shift observed in spintronics from the current-perpendicular-to-plane geometry towards lateral geometries, illustrating the new opportunities offered by this configuration. Using CoFe-based all-metallic LSVs, we show that giant magnetoresistance variations of more than 10% can be obtained, competitive with the current-perpendicular-to-plane giant magnetoresistance. We then focus on the interest of being able to tailor freely the geometries. On the one hand, by tailoring the non-magnetic parts, we show that it is possible to enhance the spin signal of giant magnetoresistance structures. On the other hand, we show that tailoring the geometry of lateral structures allows creating a multilevel memory with high spin signals, by controlling the coercivity and shape anisotropy of the magnetic parts. Furthermore, we study a new device in which the magnetization direction of a nanodisk can be detected. We thus show that the ability to control the magnetic properties can be used to take advantage of all the spin degrees of freedom, which are usually occulted in current-perpendicular-to-plane devices. This flexibility of lateral structures relatively to current-perpendicular-to-plane structures is thus found to offer a new playground for the development of spintronic applications.

Geometrical control of pure spin current induced domain wall depinning.

We investigate the pure spin-current assisted depinning of magnetic domain walls in half ring based Py/Al lateral spin valve structures. Our optimized geometry incorporating a patterned notch in the detector electrode, directly below the Al spin conduit, provides a tailored pinning potential for a transverse domain wall and allows for a precise control over the magnetization configuration and as a result the domain wall pinning. Due to the patterned notch, we are able to study the depinning field as a function of the applied external field for certain applied current densities and observe a clear asymmetry for the two opposite field directions. Micromagnetic simulations show that this can be explained by the asymmetry of the pinning potential. By direct comparison of the calculated efficiencies for different external field and spin current directions, we are able to disentangle the different contributions from the spin transfer torque, Joule heating and the Oersted field. The observed high efficiency of the pure spin current induced spin transfer torque allows for a complete depinning of the domain wall at zero external field for a charge current density of [Formula: see text] A m-2, which is attributed to the optimal control of the position of the domain wall.

Evidence for spin-to-charge conversion by Rashba coupling in metallic states at the Fe/Ge(111) interface.

The spin-orbit coupling relating the electron spin and momentum allows for spin generation, detection and manipulation. It thus fulfils the three basic functions of the spin field-effect transistor. However, the spin Hall effect in bulk germanium is too weak to produce spin currents, whereas large Rashba effect at Ge(111) surfaces covered with heavy metals could generate spin-polarized currents. The Rashba spin splitting can actually be as large as hundreds of meV. Here we show a giant spin-to-charge conversion in metallic states at the Fe/Ge(111) interface due to the Rashba coupling. We generate very large charge currents by direct spin pumping into the interface states from 20 K to room temperature. The presence of these metallic states at the Fe/Ge(111) interface is demonstrated by first-principles electronic structure calculations. By this, we demonstrate how to take advantage of the spin-orbit coupling for the development of the spin field-effect transistor.

Highly efficient and tunable spin-to-charge conversion through Rashba coupling at oxide interfaces.

The spin-orbit interaction couples the electrons' motion to their spin. As a result, a charge current running through a material with strong spin-orbit coupling generates a transverse spin current (spin Hall effect, SHE) and vice versa (inverse spin Hall effect, ISHE). The emergence of SHE and ISHE as charge-to-spin interconversion mechanisms offers a variety of novel spintronic functionalities and devices, some of which do not require any ferromagnetic material. However, the interconversion efficiency of SHE and ISHE (spin Hall angle) is a bulk property that rarely exceeds ten percent, and does not take advantage of interfacial and low-dimensional effects otherwise ubiquitous in spintronic hetero- and mesostructures. Here, we make use of an interface-driven spin-orbit coupling mechanism-the Rashba effect-in the oxide two-dimensional electron system (2DES) LaAlO3/SrTiO3 to achieve spin-to-charge conversion with unprecedented efficiency. Through spin pumping, we inject a spin current from a NiFe film into the oxide 2DES and detect the resulting charge current, which can be strongly modulated by a gate voltage. We discuss the amplitude of the effect and its gate dependence on the basis of the electronic structure of the 2DES and highlight the importance of a long scattering time to achieve efficient spin-to-charge interconversion.

Spin transport in p-type germanium.

We report on the spin transport properties in p-doped germanium (Ge-p) using low temperature magnetoresistance measurements, electrical spin injection from a ferromagnetic metal and the spin pumping-inverse spin Hall effect method. Electrical spin injection is carried out using three-terminal measurements and the Hanle effect. In the 2-20 K temperature range, weak antilocalization and the Hanle effect provide the same spin lifetime in the germanium valence band (≈1 ps) in agreement with predicted values and previous optical measurements. These results, combined with dynamical spin injection by spin pumping and the inverse spin Hall effect, demonstrate successful spin accumulation in Ge. We also estimate the spin Hall angle θ(SHE) in Ge-p (6-7 x 10(-4) at room temperature, pointing out the essential role of ionized impurities in spin dependent scattering.

Comparison of the use of NiFe and CoFe as electrodes for metallic lateral spin valves.

Spin injection and detection in Co60Fe40-based all-metallic lateral spin valves have been studied at both room and low temperatures. The obtained spin signals amplitudes have been compared to those of identical Ni80Fe20-based devices. The replacement of Ni80Fe20 by CoFe allows increasing the spin signal amplitude by up to one order of magnitude, thus reaching 50 mΩ at room temperature. The spin signal dependence with the distance between the ferromagnetic electrodes has been analyzed using both a 1D spin-transport model and finite element method simulations. The enhancement of the spin signal amplitude when using CoFe electrodes can be explained by a higher effective polarization.

Elementary depinning processes of magnetic domain walls under fields and currents.

The probability laws associated to domain wall depinning under fields and currents have been studied in NiFe and FePt nanowires. Three basic domain wall depinning processes, associated to different potential landscapes, are found to appear identically in those systems with very different anisotropies. We show that these processes constitute the building blocks of any complex depinning mechanism. A Markovian analysis is proposed, that provides a unified picture of the depinning mechanism and an insight into the pinning potential landscape.

Switchable spin-current source controlled by magnetic domain walls.

Using nonlocal spin injection, spin-orbit coupling, or spincaloritronic effects, the manipulation of pure spin currents in nanostructures underlies the development of new spintronic devices. Here, we demonstrate the possibility to create switchable pure spin current sources, controlled by magnetic domain walls. When the domain wall is located at a given point of the magnetic circuit, a pure spin current is injected into a nonmagnetic wire. Using the reciprocal measurement configuration, we demonstrate that the proposed device can also be used as a pure spin current detector. Thanks to its simple geometry, this device can be easily implemented in spintronics applications; in particular, a single current source can be used both to induce the domain wall motion and to generate the spin signal.

Spin pumping and inverse spin Hall effect in platinum: the essential role of spin-memory loss at metallic interfaces.

Through combined ferromagnetic resonance, spin pumping, and inverse spin Hall effect experiments in Co|Pt bilayers and Co|Cu|Pt trilayers, we demonstrate consistent values of ℓsfPt=3.4±0.4 nm and θSHEPt=0.056±0.010 for the respective spin diffusion length and spin Hall angle for Pt. Our data and model emphasize the partial depolarization of the spin current at each interface due to spin-memory loss. Our model reconciles the previously published spin Hall angle values and explains the different scaling lengths for the ferromagnetic damping and the spin Hall effect induced voltage.

Spin-to-charge conversion using Rashba coupling at the interface between non-magnetic materials.

The Rashba effect is an interaction between the spin and the momentum of electrons induced by the spin-orbit coupling (SOC) in surface or interface states. Its potential for conversion between charge and spin currents has been theoretically predicted but never clearly demonstrated for surfaces or interfaces of metals. Here we present experiments evidencing a large spin-charge conversion by the Bi/Ag Rashba interface. We use spin pumping to inject a spin current from a NiFe layer into a Bi/Ag bilayer and we detect the resulting charge current. As the charge signal is much smaller (negligible) with only Bi (only Ag), the spin-to-charge conversion can be unambiguously ascribed to the Rashba coupling at the Bi/Ag interface. This result demonstrates that the Rashba effect at interfaces can be used for efficient charge-spin conversion in spintronics.

Crossover from spin accumulation into interface states to spin injection in the germanium conduction band.

Electrical spin injection into semiconductors paves the way for exploring new phenomena in the area of spin physics and new generations of spintronic devices. However the exact role of interface states in the spin injection mechanism from a magnetic tunnel junction into a semiconductor is still under debate. In this Letter, we demonstrate a clear transition from spin accumulation into interface states to spin injection in the conduction band of n-Ge. We observe spin signal amplification at low temperature due to spin accumulation into interface states followed by a clear transition towards spin injection in the conduction band from 200 K up to room temperature. In this regime, the spin signal is reduced to a value compatible with the spin diffusion model. More interestingly, the observation in this regime of inverse spin Hall effect in germanium generated by spin pumping and the modulation of the spin signal by a gate voltage clearly demonstrate spin accumulation in the germanium conduction band.

Detection of domain-wall position and magnetization reversal in nanostructures using the magnon contribution to the resistivity.

We show that magnetization reversal detection can be achieved at room temperature using the contribution of magnons to resistivity, in 50 nm wide nanowires with either perpendicular anisotropy (FePt) or in-plane magnetization (NiFe). Even though these nanowires are made from single layers, simple magnetoresistance measurements can be used to measure switching fields, or to detect the position of a domain wall along a nanowire. Surprisingly, in NiFe nanowires, and for applied fields nearly parallel to the wire, the magnon contribution is found to dominate the classical anisotropic magnetoresistance.

Thermally activated depinning of a narrow domain wall from a single defect.

We describe the field induced depinning process of a magnetic domain wall (DW) from a single bidimensional nanometric defect. The DW propagates in a wire lithographed on a film with strong perpendicular anisotropy. We observe a statistical distribution of the relaxation time consistent with a Néel-Brown picture of magnetization reversal. This indicates that the nanometric DW can be considered as an ideal monodomain particle switching over a single energy barrier. Such a stochastic character of DW depinning has to be taken into account for spintronic applications.

Magnetic domain wall propagation unto the percolation threshold across a pseudorectangular disordered lattice.

The reversal process of thin FePt/Pt(001) layers with perpendicular magnetization was observed by magnetic imaging techniques. Reversal occurs through domain wall propagation across a strongly disordered rectangular lattice of linear anisotropy defects. Micromagnetic simulations of domain wall pinning allowed deriving an analytical model of the reversal process unto percolation threshold. Quantitative agreement is found between the calculated and experimental fractal dimension of the reversed domain.

Individual domain wall resistance in submicron ferromagnetic structures.

The resistance generated by individual domain walls is measured in a FePd nanostructure. Combining transport and magnetic imaging measurements, the intrinsic domain wall resistance is quantified. It is found positive and of a magnitude consistent with that predicted by models based on spin scattering effects within the walls. This magnetoresistance at a nanometer scale allows a direct counting of the number of walls inside the nanostructure. The effect is then used to measure changes in the magnetic configuration of submicron stripes under application of a magnetic field.