Carbon Dot Synthesis in CYTOP Optical Fiber Using IR Femtosecond Laser Direct Writing and Its Luminescence Properties.

Luminescent carbon dots (CDs) were locally synthesized in the core of CYTOP fibers using IR femtosecond laser direct writing (FLDW), a one-step simple method serving as a post-treatment of the pristine fiber. This approach enables the creation of several types of modifications such as ellipsoid voids. The CDs and photoluminescence (PL) distribute at the periphery of the voids. The PL spectral properties were studied through the excitation/emission matrix in the visible range and excitation/emission spectra in the UV/visible range. Our findings reveal the presence of at least three distinct luminescent species, facilitating a broad excitation range extending from UV to green, and light emission spanning from blue to red. The average laser power and dose influence the quantity and ratio of these luminescent CD species. Additionally, we measured the spatially resolved lifetime of the luminescence during and after the irradiation. We found longer lifetimes at the periphery of the laser-induced modified regions and shorter ones closer to the center, with a dominant lifetime ~2 ns. Notably, unlike many other luminophores, these laser-induced CDs are insensitive to oxygen, enhancing their potential for display or data storage applications.

Nanometrology based control: taming radical grafting reactions with attoliter precision.

Precisely controlled micropatterning with organic moieties is a promising route for designing smart surfaces, enabling the development of microsensors and actuators with optimal usage of reactants. Such applications require fine control over the surface modification process, which in turn demands detailed knowledge about the surface modification process. As complex surface kinetics often emerge as a result of even slight modifications of the grafting entity, non-invasive, sensitive and precise closed loop control strategies are highly desirable. In this paper we demonstrate that a nanometrology approach based on quantitative phase imaging (QPI) fulfill all these requirements. We first use the technique to monitor surface photografting kinetics of aryl radicals, comprehensively analyzing the effect of substituents on surface addition reactions. We demonstrate that several aspects of the grafting process are affected in complex ways, rendering open-loop strategies impossible to implement precisely. Then, we show that the operando optical phase signal can be used as a direct feedback, guiding the grafting reaction process. Using relatively simple instrumentation, we demonstrate that general and precise control strategies can be designed and used to control the volume of the grafting material with attoliter precision, in spite of radically different surface modification kinetics spanning several orders of magnitude.

LASU: An efficient and stable phthalocyanine dye with tolerable safety profile for self-disinfecting anti-COVID textiles activated by ambient light.

BACKGROUND: Recent COVID crisis has demonstrated that modern society urgently needs an accessible protection against mass infections, especially viruses, as the new strains are appearing at an ever-increasing pace and cause severe harm to the population and the world economy. METHODS: We have developed an efficient phthalocyanine photosensitizer LASU, that is suitable for dyeing textiles and allows to prepare reusable self-disinfecting fabrics with strong antiviral properties. The safety profile of LASU was evaluated in accredited laboratories by several in vitro assays according to the OECD-guidelines. RESULTS: The textiles impregnated with LASU phthalocyanine showed a significant antiviral photodynamic effect even under moderate indoor and outdoor light. The dye did not show any genotoxic potential in human lymphocyte micronucleus assay. It showed a possible indication for eye irritation in human EpiOcular™ model and was phototoxic when tested in mouse BALB/c 3T3 cell test in the presence and absence of UVA-irradiation. CONCLUSION: Novel phthalocyanine-dyed textiles are suitable for general use as self-disinfecting antiviral barriers and materials in hospitals, households, and public places. The safety profile of LASU is the phototoxic effect which is related to LASU´s mode of action.

Operando surface optical nanometrology reveals diazonium salts' visible photografting mechanism.

High resolution and quantitative surface modification through photografting is a highly desirable strategy towards the preparation of smart surfaces, enabling chemical functions to be precisely located onto specific regions of inert surfaces. Although promising, the mechanisms leading to direct (without the use of any additive) photoactivation of diazonium salts using visible wavelengths are poorly understood, precluding the generalization of popular diazonium-based electrografting strategies into high resolution photografting ones. In this paper, we employ quantitative phase imaging as a nanometrology tool for evaluating the local grafting rate with diffraction-limited resolution and nanometric precision. By carefully measuring the surface modification kinetics under a range of different conditions, we reveal the reaction mechanism while evaluating the influence of key parameters, such as the power density, the radical precursor concentration and the presence of side reactions.

FRET-mediated quenching of BODIPY fluorescent nanoparticles by methylene blue and its application to bacterial imaging.

High resolution and a good signal to noise ratio are a requirement in cell imaging. However, after labelling with fluorescent entities, and after several washing steps, there is often an unwanted fluorescent background that reduces the images resolution. For this purpose, we developed an approach to remove the signal from extra-cellular fluorescent nanoparticles (FNPs) during bacteria imaging, without the need for any washing steps. Our idea is to use methylene blue to quench > 90% of the emission of BODIPY-based fluorescent polymer nanoparticle by a FRET process. This "Hide-and-Seek Game" approach offers a novel strategy to apply fluorescence quenching in bioimaging to improve image accuracy.

Local Surface Chemistry Dynamically Monitored by Quantitative Phase Microscopy.

Surface modification by photo grafting constitutes an interesting strategy to prepare functional surfaces. Precision applications, however, demand quantitative methods able to monitor and control the amount and distribution of surface modifications, which is hard to achieve, particularly in operando conditions. In this paper, a label-free, cost-effective, all-optical method based on wavefront sensing which is able to quantitatively track the evolution of grafted layers in real-time, is presented. By positioning a simple thin diffuser in the close vicinity of a camera, the thickness of grafted patterns is directly evaluated with sub-nanometric sensitivity and diffraction-limited lateral resolution. By performing an in-depth kinetic analysis of the local modification of an inert substrate (glass cover slips) through photografting of arydiazonium salts, different growth regimes are characterized and several parameters are estimated, such as the grafting efficiency, density and the apparent refractive index distribution of the resulting grafted layers. Both focused and widefield-grafting can be quantitatively monitored in real time, providing valuable guidelines to maximize functionalization efficiency. The association of a well-characterized versatile photografting reaction with the proposed flexible and sensitive monitoring strategy enables functional surfaces to be prepared, and puts surface micro- to submicro-structuration within the reach of most laboratories.

Coating gold nanorods with silica prevents the generation of reactive oxygen species under laser light irradiation for safe biomedical applications.

Gold nanoparticles can produce reactive oxygen species (ROS) under the action of ultrashort pulsed light. While beneficial for photodynamic therapy, this phenomenon is prohibitive for other biomedical applications such as imaging, photo-thermal drug release, or targeted gene delivery. Here, ROS are produced in water by irradiating gold nanorods and silica-coated gold nanorods with near-infrared femtosecond laser pulses and are detected using two fluorescent probes. Our results demonstrate that a dense silica shell around gold nanorods inhibits the formation of singlet oxygen (1O2) and hydroxyl radical (˙OH) efficiently. The silica coating prevents the Dexter energy transfer between the nanoparticles and 3O2, stopping thus the generation of 1O2. In addition, numerical simulations accounting for the use of ultrashort laser pulses show that the plasmonic field enhancement at the nanoparticle vicinity is lessened once adding the silica layer. With the multiphotonic ejection of electrons being also blocked, all the possible pathways for ROS production are hindered by adding the silica shell around gold nanorods, making them safer for a range of biomedical developments.

Fluorescent Copolymers for Bacterial Bioimaging and Viability Detection.

Novel fluorescent labels with high photostability and high biocompatibility are required for microbiological imaging and detection. Here, we present a green fluorescent polymer chain (GFPC), designed to be nontoxic and water-soluble, for multicolor bioimaging and real-time bacterial viability determination. The copolymer is synthesized using a straightforward one-pot reversible addition-fragmentation chain-transfer (RAFT) polymerization technique. We show that GFPC does not influence bacterial growth and is stable for several hours in a complex growth medium and in the presence of bacteria. GFPC allows the labeling of the bacterial cytoplasm for multicolor bacterial bioimaging applications. It can be used in combination with propidium iodide (PI) to develop a rapid and reliable protocol to distinguish and quantify, in real time, by flow cytometry, live and dead bacteria.

Self-Assembled Monolayers of Redox-Active 4d-4f Heterobimetallic Complexes.

In this work, we report the preparation of functional interfaces incorporating heterobimetallic systems consisting in the association of an electroactive carbon-rich ruthenium organometallic unit and a luminescent lanthanide ion (Ln = Eu3+ and Yb3+). The organometallic systems are functionalized with a terminal hexylthiol group for subsequent gold surface modification. The formation of self-assembled monolayers (SAMs) with these complex molecular architectures are thoroughly demonstrated by employing a combination of different techniques, including infrared reflection absorption spectroscopy, ellipsometry, contact angle, and cyclic voltammetry measurements. The immobilized heterobimetallic systems show fast electron-transfer kinetics and, hence, are capable of fast electrochemical response. In addition, the characteristic electrochemical signals of the SAMs were found to be sensitive to the presence of lanthanide centers at the bipyridyl terminal units. A positive shift of the potential of the redox signal is readily observed for lanthanide complexes compared to the bare organometallic ligand. This effect is equally observed for preformed complexes and on-surface complexation. Thus, an efficient ligating recruitment of europium and ytterbium cations at gold-modified electrodes is demonstrated, allowing for an easy electrochemical detection of the lanthanide ions along with an alternative preparative method of SAMs incorporating lanthanide cations compared to the immobilization of the preformed complex.

Fluorenylporphyrins functionalized by electrochromic ruthenium units as redox-triggered fluorescence switches.

Two dyads containing tris- and tetrakis-meso-fluorenyl-substituted porphyrin and ethynylruthenium units, 1 and 2, were investigated by emission spectro-electrochemical (SEC) methods for their potential use as fluorescence switches. The ruthenium group as a potential electron donor and the porphyrin as a potential electron acceptor are connected by a phenylene bridge in 1 and by a fluorenylene bridge in 2. The new fluorenyl-linked dyad 2 was probed by UV-visible, near-infrared (NIR) and infrared (IR) absorption SEC methods, and the properties interpreted with the aid of hybrid-DFT computations, for comparison with reported data for 1. The porphyrin-based fluorescence of 1 decreased in intensity upon oxidation to 1+ and decreased further on oxidising 1+ to 12+. A much weaker change in the fluorescence intensity of 2 was observed upon oxidation to 2+ but the intensity decreased upon subsequent oxidation of 2+ to 22+. These findings contrast with data reported for some other porphyrins appended with redox-active ruthenium or iron units, where fluorescence intensities increase upon oxidation of the peripheral metal centers, but they match data reported more recently for closely related arrays. A rationale for these apparently contrasting observations is proposed.

Redox-driven porphyrin based systems for new luminescent molecular switches.

In this work, we explore the possibility of tuning the fluorescence intensity of two porphyrin systems through the electrochemical oxidation of an appended ruthenium acetylide bridge. Two electrochemically switchable systems, a dyad (ZnP-Ru, 3) and a triad (ZnP-Ru-P2H, 5), were prepared and investigated. In the ZnP-Ru dyad, the fluorescence of the zinc porphyrin was switched reversibly between the ON and OFF state upon the oxidation of the ruthenium unit, the most probable quenching process involved after oxidation being the electron transfer from the singlet excited state of ZnP to the oxidized ruthenium center. In the ZnP-Ru-P2H triad, we show that both porphyrins' fluorescence are highly quenched independent of the redox state of the ruthenium bridge owing to the efficient photoinduced charge transfer within the ruthenium complex.

Unprecedented Self-Organized Monolayer of a Ru(II) Complex by Diazonium Electroreduction.

A new heteroleptic polypyridyle Ru(II) complex was synthesized and deposited on surface by the diazonium electroreduction process. It yields to the covalent grafting of a monolayer. The functionalized surface was characterized by XPS, electrochemistry, AFM, and STM. A precise organization of the molecules within the monolayer is observed with parallel linear stripes separated by a distance of 3.8 nm corresponding to the lateral size of the molecule. Such organization suggests a strong cooperative process in the deposition process. This strategy is an original way to obtain well-controlled and stable functionalized surfaces for potential applications related to the photophysical properties of the grafted chromophore. As an exciting result, it is the first example of a self-organized monolayer (SOM) obtained using diazonium electroreduction.

Rapid and accurate detection of Escherichia coli growth by fluorescent pH-sensitive organic nanoparticles for high-throughput screening applications.

Rapid detection of bacterial growth is an important issue in the food industry and for medical research. Here we present a novel kind of pH-sensitive fluorescent nanoparticles (FANPs) that can be used for the rapid and accurate real-time detection of Escherichia coli growth. These organic particles are designed to be non-toxic and highly water-soluble. Here we show that the coupling of pH sensitive fluoresceinamine to the nanoparticles results in an increased sensitivity to changes in pH within a physiologically relevant range that can be used to monitor the presence of live bacteria. In addition, these FANPs do not influence bacterial growth and are stable over several hours in a complex medium and in the presence of bacteria. The use of these FANPs allows for continuous monitoring of bacterial growth via real-time detection over long time scales in small volumes and can thus be used for the screening of a large number of samples for high-throughput applications such as screening for the presence of antibiotic resistant strains.

A spiral designed surface based on amino-perylene grafted polyacrylic acid.

This communication shows the possibility of inducing spontaneous special surface organisation by means of grafting a fluorescent aminobenzo[g,h,i]perylene derivative onto surface grown polyacrylic chains.

Nanoparticle organization through photoinduced bulk mass transfer.

A series of dipolar triphenylaminoazo derivatives, with largely distinct charge transfer and glass transition temperatures, has been synthesized. Their photomigration capability in the solid state to form surface relief gratings (SRGs) under interferential illumination has been investigated with respect to their photochromic properties and showed a prevailing influence of the bulkiness of the azo substituent. The azo mass transfer was utilized to efficiently photoalign 200 nm polystyrene nanoparticles along the SRG crests, which were initially deposited on nonirradiated azo surfaces. In contrast, nanoparticles spin cast on prestructured surface relief gratings were localized in the troughs of the periodic structures. These distinct locations point out the ability of isotropic and amorphous photochromic thin films to collectively move and organize nano-objects in an ordered fashion through the use of polarized illumination. This versatile approach opens the path to optically aligned ensembles of individual nano-objects over large areas, which can be further combined with metallic conductive or magnetic coating to create novel functional nanostructures.

Spectroscopy of BODIPY in solid phase: crystal and nanoparticles.

We compare the absorption and fluorescence spectra of single crystals and suspensions of nanoparticles with the prediction of the Frenkel theory. The single crystals of a novel synthesized fluorescent BODIPY derivative dye, adamantyl mesityl BODIPY (4,4-difluoro-3,5-di-(adamantyl)-8-mesityl-4-bora-3a,4a-diaza-s-indacene), have been prepared. Their birefringence and dichroism have been studied. The X-ray crystallography shows a monoclinic crystal with all transition moments parallel to one common plane. The refractive indices along the two neutral axes have been measured for a wavelength from 530 to 700 nm, with a difference, Δn equal to 0.11. The Frenkel exciton theory was used here to describe the coupling of the electronic excited states in the crystals. The coupling estimated by the dipolar approximation was compared with the excited state splitting calculated by TDDFT in dimers. A perfect crystal absorption spectrum is predicted. The spectral broadening that occurs at room temperature is also taken into account. The absorption spectrum of the monocrystal is reproduced without adjustable parameters. But we had to take into account the presence of optical leaks in our microspectrophotometer before comparing experiment and theory. The controlled size nanoparticles (NPs) produced by our 3D hydrodynamic focusing microfluidic system exhibit molecule like absorption. We could reproduce their absorption and fluorescence spectra assuming a strong disorder in the Frenkel model. We conclude that the nanoparticles are amorphous.

Solvatochromic dissociation of non-covalent fluorescent organic nanoparticles upon cell internalization.

Amorphous red-emitting materials involving solvatochromic small molecules have been processed by the reprecipitation method as non-doped nanospheres characterized by a remarkably low polydispersity. Their mean diameter could simply be tuned by the concentration of the organic solution giving rise to time-stable dispersion of 85-200 nm-sized nanoparticles. Time-resolved measurements performed on solid nanoparticles showed significant size-dependence effects of the emission lifetime and maxima evidencing populations with distinct molecular conformations. Nanoparticle internalization has proved successful in NIH-3T3 murine fibroblasts with normal toxicity effects after 48 h. Fluorescence confocal microscopy under one- and two-photon excitations revealed dual emission enabling localization of the organic material within the plasma membrane and the cytoplasm. Model experiments resorting to suspended artificial lipid bilayers allowed us to conclude on the dissolution of nanoparticles by the phospholipid membrane during the internalization process. They let us to assume that uptake of hydrophobic nanoparticles by living cells implies an endocytosis mechanism operating through the formation of plasmic vesicles.