Accuracy of intraoperative navigation for orbital fracture repair: A retrospective morphometric analysis.

In this retrospective case series, patients undergoing surgery to treat isolated orbital floor fractures were morphometrically analyzed. Cloud Compare was used to compare mesh positioning with a virtual plan, using the distance-to-nearest-neighbor method. To assess the accuracy of mesh positioning, a mesh area percentage (MAP) parameter was introduced and three distance ranges were defined as the outcome measures: the 'high-accuracy range' included MAPs at a distance of 0-1 mm from the preoperative plan; the 'intermediate-accuracy range' included MAPs at a distance of 1.1-2 mm from the preoperative plan; the 'low-accuracy range' included MAPs at a distance of >2 mm from the preoperative plan. To complete the study, morphometric analysis of the results was combined with clinical judgment ('excellent', 'good', or 'poor') of mesh positioning by two independent blind observers. In total, 73 of 137 orbital fractures met the inclusion criteria. In the 'high-accuracy range' the mean, minimum, and maximum MAP values were 64%, 22%, and 90%, respectively. In the 'intermediate-accuracy range', the mean, minimum, and maximum values were 24%, 10%, and 42%, respectively. In the 'low-accuracy range', the values were 12%, 1%, and 48%, respectively. Both observers classified 24 cases of mesh positioning as 'excellent', 34 as 'good', and 12 as 'poor'. Within the limitations of the study, it seems that virtual surgical planning and intraoperative navigation has the potential to add quality to the repair of the orbital floor and, therefore, should be taken into consideration whenever appropriate.

Three-Dimensional Evaluation of Soft Tissue Malar Modifications after Zygomatic Valgization Osteotomy via Geometrical Descriptors.

Patients with severe facial deformities present serious dysfunctionalities along with an unsatisfactory aesthetic facial appearance. Several methods have been proposed to specifically plan the interventions on the patient's needs, but none of these seem to achieve a sufficient level of accuracy in predicting the resulting facial appearance. In this context, a deep knowledge of what occurs in the face after bony movements in specific surgeries would give the possibility to develop more reliable systems. This study aims to propose a novel 3D approach for the evaluation of soft tissue zygomatic modifications after zygomatic osteotomy; geometrical descriptors usually involved in face analysis tasks, i.e., face recognition and facial expression recognition, are here applied to soft tissue malar region to detect changes in surface shape. As ground truth for zygomatic changes, a zygomatic openness angular measure is adopted. The results show a high sensibility of geometrical descriptors in detecting shape modification of the facial surface, outperforming the results obtained from the angular evaluation.

Virtual planning and CAD/CAM-assisted distraction for maxillary hypoplasia in cleft lip and palate patients: Accuracy evaluation and clinical outcome.

The aim of this prospective study was to report the experience with a specific guided distraction protocol for the treatment of CLP patients with severe midface hypoplasia. From January 2016 to April 2019, six consecutive, non-growing, CLP patients with maxillary hypoplasia underwent a specific distraction protocol based on the use of VSP, CAD/CAM-generated surgical splints, cutting guides, prebent internal maxillary distractors, early removal of distractors, and acute callus manipulation and fixation. STL files for VSP, using multislice CT scans taken preoperatively (T0) and 3 months after distractor removal (T1) were superimposed using the free software 3D Slicer and Geomagic Wrap to evaluate the accuracy of maxillary repositioning and assess 3D bone changes. Clinical outcome was evaluated at the 1-year follow-up (T2). The patients and surgeon were satisfied with the occlusal and aesthetic outcomes. A maximum difference of 2 mm between the VSP and the actual surgical outcome was chosen as the success criterion for accuracy. The average linear difference for selected points was <2 mm in four patients and >2 mm in two patients. The average distance of the postoperative maxilla from the VSP model was 2.28 mm (median 1.85), while the average forward movement of the maxilla was 10.18 mm The protocol used is effective and accurate in the correction of severe maxillary hypoplasia in CLP patients. Early removal of the distractor and stabilization with plates reduces patient discomfort and does not jeopardize stability. This protocol should be reserved for complex cases due to the costs of the procedure, which are not negligible.

Malar augmentation with zygomatic osteotomy in orthognatic surgery: Bone and soft tissue changes threedimensional evaluation.

BACKGROUND: The aim of this prospective study is to objectively assess 3D soft tissue and bone changes of the malar region by using the malar valgization osteotomy in concomitant association with orthognatic surgery. MATERIALS AND METHODS: From January 2015 to January 2018, 10 patients who underwent single stage bilateral malar valgization osteotomy in conjunction with maxillo-mandibular orthognatic procedures for aesthetic and functional correction were evaluated. Clinical and surgical reports were collected and patient satisfaction was evaluated with a VAS score. For each patient, maxillofacial CT-scans were collected 1 month preoperatively (T0) and 6 months after the operation (T1). DICOM data were imported and elaborated in the software MatLab, which creates a 3D soft tissue model of the face. 3D Bone changes were assessed importing DICOM data into iPlan (BrainLAB 3.0) software and the superimposition process was achieved using autofusion. Descriptive statistical analyses were obtained for soft tissue and bone changes. RESULTS: Considering bone assessment the comparison by superimposition between T0 and T1 showed an increase of the distance between bilateral malar prominence (Pr - Pl) and a slight forward movement (87,65 ± 1,55 to 97,60 ± 5,91); p-value 0.007. All of the patients had improvement of α angle, ranging from 36,30 ± 1,70 to 38,45 ± 0,55, p-value 0,04 (αr) and 36,75 ± 1,58 to 38,45 ± 0,35; p-value 0,04 (αl). The distance S increased from 78,05 ± 2,48 to 84,2 ± 1,20; p-value 0,04 (Sr) and 78,65 ± 2,16 to 82,60 ± 0,90 (Sl); p-value 0,03. Considering the soft tissue, the comparison by superimposition between T0 and T1 showed an antero-lateral movement (p-value 0.008 NVL; p-value 0.001 NVR) of the malar bone projection together with an increase in width measurements (p-value 0,05 VL; p-value 0,01 VR). Angular measurement confirmed the pattern of the bony changes (p-value 0.034 αL; p-value 0,05 αR). CONCLUSION: The malar valgization osteotomy in conjunction with orthognatic surgery is effective in improving zygomatic projection contributing to a balanced facial correction in midface hypoplasia.3D geometrical based volume and surface analysis demonstrate an increase in transversal and forward direction. The osteotomy can be safely performed in conjunction with orthognatic procedures.

Surgical Management of the Peripheral Osteoma of the Zygomatic Arch: A Case Report and Literature Review.

An osteoma is a benign, slow-growing, osteogenic neoplasm with a low recurrence rate that is typically characterized by the proliferation of a compact or cancellous bone. It can be peripheral, central, or extraskeletal. Usually asymptomatic, peripheral osteomas in the maxillofacial region commonly arise in the paranasal sinuses and mandible and rarely occur in the zygomatic arch, with only six previously documented cases in the literature. Here, we present the management of a solitary peripheral osteoma of the right zygomatic arch in a 72-year-old woman and a review of the literature.

Merkel cell carcinoma of the forehead area: a literature review and case report.

BACKGROUND: Merkel cell carcinoma (MCC) is an uncommon, aggressive malignancy of the skin, mostly affecting head and neck area in elderly white patients. Between head/neck sites, face accounts for 61% and forehead accounts for 17% of all face MCCs. PURPOSE: We here present a literature review MCC cases arising in the forehead area, published in the English literature in the period 1987-2018, and report a personal observation with a late diagnosis and a treatment out of the current recommendations. The aims of this paper are to provide an up-to-date on MCC arising in the forehead area and to raise awareness about misdiagnosis of this type of lesion mimicking arteriovenous malformations (AVM). MATERIAL AND METHOD: Literature review was performed on PubMed and Medline database and "Merkel cell carcinoma (MCC)," "forehead" and "MCC forehead location" were the terms the authors searched for. Patients' data have been drawn from descriptions of single cases and of short case series reports. For each case, data were collected about clinical characteristics, treatment modalities and outcomes. The study has been limited to the clinical features of the disease, excluding etiologic/pathogenic aspects. RESULTS: Twenty-five patients with forehead MCC have been identified, coming from 20 sources. Nineteen presented a locoregional disease and 6 had an advanced pathology. TNM classification was reported in only two cases lacking for the other available data. Patients presented at mean age of 66 years with solitary or multiple nodules or dome-shaped/hemispherical mass, rarely ulcerated. Mean size of tumors was 1.13 cm of max diameter. Previous or concurrent malignancies or immune-hematologic disorders (AIDS) were often associated. At first investigation, lesion was often mistaken for other malignant or benign processes and, then, diagnosis was generally late. Some type of preoperative biopsy was performed in 3 patients, while the others had only a postoperative microscopic study of specimen. Initial treatment consisted in 6 cases (24%) in a not further specified about extent and width of margins local excision of the primary lesion, while a wide resection was reported in only 3 cases (12%). Surgical treatment of involved lymph-nodes was performed in 3 cases (12%). Six patients underwent radiotherapy for locoregional or distant recurrences. Mortality and overall survival rate at five years were 28% and 24%, respectively. Spontaneous regression was observed in 3 patients (12%). CASE REPORT: Personal observation concerned an 82-year-old woman presenting with a forehead periorbital 5 × 5 cm red-bluish mass. The erythematous lesion was erroneously diagnosed as hemangioma on the base of color, the absence of any signs of malignancy, an angio CT indicating a hypervascular tissue and a FNA cytology (FNAC) lacking of malignant cells. The mass was excised as a benign lesion with about 1 cm margins extent without searching larger edges. Postoperative radiotherapy was offered to the patient after histology report, but she refused. After 4 months from surgery, she had a parotid metastasis and died from the illness in spite of platinum-based chemotherapy. CONCLUSIONS: This study confirms the aggressiveness of forehead MCC, comparable with that of other face similar tumors. Personal case suggests that the deceitful benign feature of lesion may mimic an AVM and that FNAC may be misleading and diagnostic failure worsen prognosis. Our experience suggests that in the face smaller than 2-3 cm margins resection may increase the risk of locoregional recurrence. Therefore, postoperative wide-field irradiation should be ever delivered, after forehead MCC surgery, not only when clear margins are unattainable or involved with tumor, but also when negative microscopic edges are documented and residual cancer is thought not persist in the tumor bed. Orbit irradiation seems to be not dangerous for the eye.

Surgical Management of Unusual Biangular Mandibular Fractures.

Bilateral mandibular angle fractures, while representing a rarity among mandibular fractures, are a huge challenge of complex management for the maxillofacial surgeon. There are still many open questions regarding the ideal management of such fractures, including the following: the removal of the third molar in the fracture line, the best surgical approach, and the fixation methods. In this report the authors present the case of 40-year-old man presenting with a bilateral mandibular angle fracture referred to the Maxillofacial Surgery Department of Turin. Open reduction and internal fixation has been made for both sides. The left side third molar was removed and the internal fixation was achieved through internal fixation with one miniplate according to Champy's technique and transbuccal access for a 4-hole miniplate at the inferior border of the mandible. Right side third molar was not removed and fixation was achieved through intraoral access and positioning of a 4-hole miniplate along the external ridge according to Champy. An optimal reduction was achieved and a correct occlusion has been restored.