From Mindless Mechanic to Educated Educator.

Over the last 100 years, the dental profession has undergone incredible progress to address problems created by oral disease. Our ability to restore function and esthetics efficiently and predictably via modern restorative materials, regenerative treatments, dental implant therapy, and digitally driven workflows is truly remarkable. For those members of our profession privileged to work in fully developed economies, the prevailing perception is that the war against caries, periodontitis, and edentulism has been largely won. There has surely never been a more exciting time to be in dentistry. Thus, it may sound paradoxical or even alarmist to state that dentistry is falling behind in its mission to serve the needs of our patients­but it is.^ieng

Indications for implant-supported rehabilitation of the posterior atrophic maxilla: A multidisciplinary consensus among experts in the field utilising the modified Delphi method.

PURPOSE: To establish consensus-driven guidelines that could support the clinical decision-making process for implant-supported rehabilitation of the posterior atrophic maxilla and ultimately improve long-term treatment outcomes and patient satisfaction. MATERIALS AND METHODS: A total of 33 participants were enrolled (18 active members of the Italian Academy of Osseointegration and 15 international experts). Based on the available evidence, the development group discussed and proposed an initial list of 20 statements, which were later evalu-ated by all participants. After the forms were completed, the responses were sent for blinded ana-lysis. In most cases, when a consensus was not reached, the statements were rephrased and sent to the participants for another round of evaluation. Three rounds were planned. RESULTS: After the first round of voting, participants came close to reaching a consensus on six statements, but no consensus was achieved for the other fourteen. Following this, nineteen statements were rephrased and sent to participants again for the second round of voting, after which a consensus was reached for six statements and almost reached for three statements, but no consensus was achieved for the other ten. All 13 statements upon which no consensus was reached were rephrased and included in the third round. After this round, a consensus was achieved for an additional nine statements and almost achieved for three statements, but no consensus was reached for the remaining statement. CONCLUSION: This Delphi consensus highlights the importance of accurate preoperative planning, taking into consideration the maxillomandibular relationship to meet the functional and aesthetic requirements of the final restoration. Emphasis is placed on the role played by the sinus bony walls and floor in providing essential elements for bone formation, and on evaluation of bucco-palatal sinus width for choosing between lateral and transcrestal sinus floor elevation. Tilted and trans-sinus implants are considered viable options, whereas caution is advised when placing pterygoid implants. Zygomatic implants are seen as a potential option in specific cases, such as for completely edentulous elderly or oncological patients, for whom conventional alternatives are unsuitable.

Long-term stability of gingival margin and periodontal soft-tissue phenotype achieved after mucogingival therapy: A systematic review.

BACKGROUND: The aim of this systematic review was two-fold: (i) to evaluate the long-term (≥5 years) stability of the gingival margin position, keratinized tissue width (KTW) and gingival thickness (GT) in sites that underwent root coverage (RC) or gingival augmentation (GA); and (ii) to assess the influence of different local variables on the long-term stability of dental and gingival tissues. MATERIALS AND METHODS: Randomized controlled trials (RCTs) and non-RCTs reporting short-term (i.e., 6-12 months after baseline surgical intervention) and long-term (≥5 years) follow-up data after surgical treatment of adult patients presenting single or multiple mucogingival deformities, defined as sites presenting gingival recession defects (GRDs) and/or (KTW) deficiency (i.e., <2 mm), were considered eligible for inclusion. MEDLINE-PubMed, EMBASE and Cochrane Central Register of Controlled Trials databases were searched for articles published up to 15 May 2023. Mixed-effects multiple linear regression was used to assess the association between KTW, type of surgical procedure and time (i.e., independent variables) on the stability of the gingival margin in sites that received RC or GA therapy. RESULTS: Of the 2569 potentially eligible records, 41 (reporting 40 studies) met the eligibility criteria. Graphical estimates including data from all RC procedures found an upward trend in recession depth (RD) increase over time. Conversely, it was observed that in 63.63% of RC studies and in 59.32% of RC treatment arms KTW increased over time, particularly in sites treated with subepithelial connective tissue grafts (SCTGs). Conversely, sites that underwent GA procedures generally exhibited an overall reduction of KTW over time. However, sites treated with free gingival grafts (FGGs) showed a decrease in RD after 10 years of follow-up. Three main findings derived from the pooled estimates were identified: (i) Gingival margin stability was associated with the amount of KTW present during short-term assessment (i.e. the greater the KTW at 6-12 months after treatment, the more stable the gingival margin). (ii) The use of autogenous soft-tissue grafts was associated with lower RD increase over time. (iii) Treatment approaches that contribute to the three-dimensional enhancement of the gingival phenotype, as clearly demonstrated by FGG, were associated with gingival margin stability. CONCLUSIONS: The extent of apical migration of the gingival margin appears to be directly related to the amount of KTW and GT upon tissue maturation. Interventions involving the use of autogenous grafts, either SCTG or FGG, are associated with greater short-term KTW gain and lower RD increase over time.

Ultrathin Feldspathic Ceramic Veneers: A Pilot SEM Evaluation of Etched Intaglio Surfaces.

Ultrathin ceramic veneers are a viable therapeutic option to manage esthetic challenges in the anterior zone. Proper conditioning of the intaglio surface of porcelain veneers is essential to achieve an adequate bonding. In clinical practice, this is typically done with chemical etching using an acid-containing agent, such as hydrofluoric acid. While it is well established that the etching effect is dependent on etching time and the acid concentration, little is known about the impact of etching time and the veneer fabrication method. The purpose of this pilot study was to evaluate, using scanning electron microscopy (SEM), the effect that different etching-time protocols have on the intaglio surface characteristics of ultrathin ceramic veneers fabricated with either the platinum foil technique or the refractory die technique. Several replicas of an ultrathin feldspathic ceramic veneer for a maxillary central incisor were fabricated. Individual specimens were processed according to different intaglio surface-etching protocols: no etching, etching for 90 seconds, etching for 120 seconds, and etching for 150 seconds (9.6% hydrofluoric acid used for all etching groups). It was observed that the 120-second etching protocol resulted in a favorable microroughness surface pattern in the platinum foil group. This pattern was comparable to that obtained by etching for 90 seconds with hydrofluoric acid the intaglio surface of veneers fabricated with the refractory die technique. Increasing the etching time to 150 seconds did not result in a more favorable roughness pattern.

Disease resolution following treatment of peri-implant diseases: A systematic review.

The aim of this PRISMA-compliant systematic review was to analyze the evidence pertaining to disease resolution after treatment of peri-implant diseases (PROSPERO: CRD42022306999) with the following PICO question: what is the rate of disease resolution following non-surgical and surgical therapy for peri-implant diseases in adult human subjects? A literature search to identify studies that fulfilled a pre-established eligibility criteria was conducted. Data on primary therapeutic outcomes, including treatment success, rate of disease resolution and/or recurrence, as well as a variety of secondary outcomes was extracted and categorized. Fifty-five articles were included. Few studies investigated the efficacy of different non-surgical and surgical therapies to treat peri-implant diseases using a set of pre-defined criteria and with follow-up periods of at least one year. The definition of treatment success and outcomes of disease resolution differed considerably among the included studies. Treatment of peri-implant mucositis was most commonly reported to be successful in arresting disease progression for ≤60% of the cases, whereas most studies on peri-implantitis treatment reported disease resolution occurring in <50% of the fixtures. In conclusion, disease resolution is generally unpredictable and infrequently achieved after the treatment of peri-implant diseases. A great variety of definitions have been used to define treatment success. Notably, percentages of treatment success and disease resolution were generally underreported. The use of standardized parameters to evaluate disease resolution should be considered an integral component in future clinical studies.

Correlation of gingival stippling with periodontal phenotypical features: A cross-sectional study.

This study aimed at determining the correlation between gingival stippling (GS) and other phenotypical characteristics. Adult subjects in need of cone-beam computed tomography scans (CBCT) and comprehensive dental treatment in the maxillary anterior region were recruited. Facial gingival thickness [GT] and buccal bone thickness [BT] were assessed utilizing CBCT. Standardized intraoral photographs were obtained to determine keratinized tissue width (KTW), presence of GS in all facial and interproximal areas between the maxillary canines, and other variables of interest, such as gingival architecture (GA), tooth shape, and location. Statistical analyses to assess different correlations among recorded variables were conducted. A total of 100 participants and 600 maxillary anterior teeth constituted the study population and sample, respectively. Facial GS was observed in 56% of males and 44% of females, and it was more frequently associated with flat GA, triangular and square/tapered teeth, central incisors, and males. Greater mean values of GT, BT, and KTW were observed in facial areas that exhibited GS. Interdental GS was present in 73% of the sites and it was more frequently observed in males, the central incisor region, and when facial GS was present. Multilevel logistic regression revealed a statistically significant association between the presence of GS and KTW, BT measured at 3mm apical to the bone crest, and tooth type. This information can be used in the recognition of common periodontal phenotypical patterns associated with specific features of great clinical significance.

Histological assessment and gene expression analysis of intra-oral soft tissue graft donor sites.

AIM: To determine the structural and gene expression features of different intra-oral soft tissue donor sites (i.e., anterior palate, posterior palate, maxillary tuberosity and retromolar pad). MATERIALS AND METHODS: Standardized mucosal tissue punch biopsies were collected from at least one donor site per subject. Histological processing was performed to determine tissue morphometry and quantify collagen composition. Site-specific gene distribution was mapped using targeted gene expression analysis and validated using real time polymerase chain reaction (qPCR). RESULTS: A total of 50 samples from 37 subjects were harvested. Epithelial thickness did not differ between sites. However, lamina propria was thicker in the maxillary tuberosity (2.55 ± 0.92 mm) and retromolar pad (1.98 ± 0.71 mm) than in the lateral palate. Type I collagen was the predominant structural protein in the lamina propria (75.06%-80.21%). Genes involving collagen maturation and extracellular matrix regulation were highly expressed in the maxillary tuberosity and retromolar pad, while lipogenesis-associated genes were markedly expressed in the lateral palate. The retromolar pad showed the most distinct gene expression profile, and the anterior and posterior palate displayed similar transcription profiles. CONCLUSIONS: Tissue samples harvested from the anterior and posterior palate differed morphologically from those from the maxillary tuberosity and retromolar pad. Each intra-oral site showed a unique gene expression profile, which might impact their biological behaviour and outcomes of soft tissue augmentation procedures.

Treatment alternatives for the rehabilitation of the posterior edentulous maxilla.

Rehabilitation of the edentulous maxilla with implant-supported fixed dental prostheses can represent a significant clinical challenge due to limited bone availability and surgical access, among other factors. This review addresses several treatment options to replace missing teeth in posterior maxillary segments, namely the placement of standard implants in conjunction with maxillary sinus floor augmentation, short implants, tilted implants, and distal cantilever extensions. Pertinent technical information and a concise summary of relevant evidence on the reported outcomes of these different therapeutic approaches are presented, along with a set of clinical guidelines to facilitate decision-making processes and optimize the outcomes of therapy.

Interproximal Soft Tissue Height Changes After Unassisted Socket Healing versus Alveolar Ridge Preservation Therapy.

The primary aim of this study was to evaluate the efficacy of alveolar ridge preservation (ARP) therapy compared with unassisted socket healing (USH) in attenuating interproximal soft tissue atrophy. Adult subjects that underwent maxillary single-tooth extraction with or without ARP therapy were included in this study. Surface scans and cone beam computed tomography were obtained to digitally assess interproximal soft tissue height changes and measure facial bone thickness (FBT), respectively. Logistic regression models were conducted to investigate the individual effect of demographic and clinical variables. Ninety-six subjects (USH=49; ARP=47) constituted the study population. Linear soft tissue assessments revealed a significant reduction of the interproximal soft tissue over time within and between groups (P<.0001). ARP therapy significantly attenuated interproximal soft tissue height reduction compared to USH (USH mesial: -2.0±0.9mm vs. ARP mesial: -1.0±0.5mm / USH distal -1.9±0.7mm vs. ARP distal: -1.1±0.5mm; P<.0001). Thin FBT (≤1mm) upon extraction was associated with greater interproximal soft tissue atrophy compared with thick FBT (>1mm), independently of the treatment received (P<.0001). Nevertheless, ARP therapy resulted in better preservation of interproximal soft tissue height especially in thin bone phenotype by a factor of 2 for the mesial site (+1.3mm) and a factor of 1.6 (+0.9mm) for the distal site. This study demonstrated that ARP therapy largely attenuates interproximal soft tissue dimensional reduction after maxillary single-tooth extraction compared with USH.

Non-invasive assessment of peri-implant mucosal thickness: A cross-sectional study.

BACKGROUND: This study aimed to evaluate the reliability and reproducibility of different non-invasive methods for the assessment of peri-implant mucosal thickness. METHODS: Subjects with two adjacent dental implants in the central maxillary region were included in this study. Three different methods to assess facial mucosal thickness (FMT) were compared: digital file superimposition using Digital Imaging and Communication in Medicine (DICOM) and stereolithography (STL) files of the arch of interest (DICOM-STL), DICOM files alone, and non-ionizing ultrasound (US). Inter-rater reliability agreements between different assessment methods were analyzed using inter-class correlation coefficients (ICCs). RESULTS: A total of 50 subjects with 100 bone-level implants constituted the study population. Assessment of FMT using STL and DICOM files demonstrated excellent inter-rater reliability agreement. Mean ICC values of 0.97 and 0.95 were observed in the DICOM-STL and DICOM groups, respectively. Comparison between the DICOM-STL and US revealed good agreement, with an ICC of 0.82 (95% CI: 0.74 to 0.88) and a mean difference of -0.13 ± 0.50 mm (-1.13 to 0.86). Comparison between DICOM files alone versus US showed good agreement, with an ICC of 0.81 (95% CI: 0.73 to 0.89) and a mean difference of -0.23 ± 0.46 mm (-1.12 to 0.67). Comparison between DICOM-STL and DICOM files revealed excellent agreement, with an ICC of 0.94 (95% CI: 0.91 to 0.96) and a mean difference of 0.1 ± 0.29 mm (LOA -0.47 to 0.46). CONCLUSIONS: Quantification of peri-implant mucosal thickness via analysis of DICOM-STL files, DICOM files, or US assessment are comparably reliable and reproducible methods.

Relevant domains, core outcome sets and measurements for implant dentistry clinical trials: The Implant Dentistry Core Outcome Set and Measurement (ID-COSM) international consensus report.

AIM: Lack of consistently reported outcomes limits progress in evidence-based implant dentistry and quality of care. The objective of this initiative was to develop a core outcome set (COS) and measurements for implant dentistry clinical trials (ID-COSM). MATERIALS AND METHODS: This Core Outcome Measures in Effectiveness Trials (COMET)-registered international initiative comprised six steps over 24 months: (i) systematic reviews of outcomes reported in the last 10 years; (ii) international patient focus groups; (iii) a Delphi project with a broad range of stakeholders (care providers, clinical researchers, methodologists, patients and industry representatives); (iv) expert group discussions organizing the outcomes in domains using a theoretical framework and identifying the COSs; (v) identification of valid measurement systems to capture the different domains and (vi) final consensus and formal approval involving experts and patients. The methods were modified from the best practice approach following the Outcome Measures in Rheumatoid Arthritis Clinical Trial and COMET manuals. RESULTS: The systematic reviews and patient focus groups identified 754 (665 + 89, respectively) relevant outcome measures. After elimination of redundancies and duplicates, 111 were formally assessed in the Delphi project. By applying pre-specified filters, the Delphi process identified 22 essential outcomes. These were reduced to 13 after aggregating alternative assessments of the same features. The expert committee organized them into four core outcome areas: (i) pathophysiology, (ii) implant/prosthesis lifespan, (iii) life impact and (iv) access to care. In each area, core outcomes were identified to capture both the benefits and harms of therapy. Mandatory outcome domains included assessment of surgical morbidity and complications, peri-implant tissue health status, intervention-related adverse events, complication-free survival and overall patient satisfaction and comfort. Outcomes deemed mandatory in specific circumstances comprised function (mastication, speech, aesthetics and denture retention), quality of life, effort for treatment and maintenance and cost effectiveness. Specialized COSs were identified for bone and soft-tissue augmentation procedures. The validity of measurement instruments ranged from international consensus (peri-implant tissue health status) to early identification of important outcomes (patient-reported outcomes identified by the focus groups). CONCLUSIONS: The ID-COSM initiative reached a consensus on a core set of mandatory outcomes for clinical trials in implant dentistry and/or soft tissue/bone augmentation. Adoption in future protocols and reporting on the respective domain areas by currently ongoing trials will contribute to improving evidence-informed implant dentistry and quality of care.

Relevant domains, core outcome sets and measurements for implant dentistry clinical trials: The Implant Dentistry Core Outcome Set and Measurement (ID-COSM) international consensus report.

AIM: Lack of consistently reported outcomes limits progress in evidence-based implant dentistry and quality of care. The objective of this initiative was to develop a core outcome set (COS) and measurements for implant dentistry clinical trials (ID-COSM). MATERIALS AND METHODS: This Core Outcome Measures in Effectiveness Trials (COMET)-registered international initiative comprised six steps over 24 months: (i) systematic reviews of outcomes reported in the last 10 years; (ii) international patient focus groups; (iii) a Delphi project with a broad range of stakeholders (care providers, clinical researchers, methodologists, patients and industry representatives); (iv) expert group discussions organizing the outcomes in domains using a theoretical framework and identifying the COSs; (v) identification of valid measurement systems to capture the different domains and (vi) final consensus and formal approval involving experts and patients. The methods were modified from the best practice approach following the Outcome Measures in Rheumatoid Arthritis Clinical Trial and COMET manuals. RESULTS: The systematic reviews and patient focus groups identified 754 (665 + 89, respectively) relevant outcome measures. After elimination of redundancies and duplicates, 111 were formally assessed in the Delphi project. By applying pre-specified filters, the Delphi process identified 22 essential outcomes. These were reduced to 13 after aggregating alternative assessments of the same features. The expert committee organized them into four core outcome areas: (i) pathophysiology, (ii) implant/prosthesis lifespan, (iii) life impact and (iv) access to care. In each area, core outcomes were identified to capture both the benefits and harms of therapy. Mandatory outcome domains included assessment of surgical morbidity and complications, peri-implant tissue health status, intervention-related adverse events, complication-free survival and overall patient satisfaction and comfort. Outcomes deemed mandatory in specific circumstances comprised function (mastication, speech, aesthetics and denture retention), quality of life, effort for treatment and maintenance and cost effectiveness. Specialized COSs were identified for bone and soft-tissue augmentation procedures. The validity of measurement instruments ranged from international consensus (peri-implant tissue health status) to early identification of important outcomes (patient-reported outcomes identified by the focus groups). CONCLUSIONS: The ID-COSM initiative reached a consensus on a core set of mandatory outcomes for clinical trials in implant dentistry and/or soft tissue/bone augmentation. Adoption in future protocols and reporting on the respective domain areas by currently ongoing trials will contribute to improving evidence-informed implant dentistry and quality of care.

Relationship between supracrestal soft tissue dimensions and other periodontal phenotypic features: A cross-sectional study.

BACKGROUND: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth. MATERIALS AND METHODS: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height). RESULTS: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT. CONCLUSIONS: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype.

Effect of periodontal phenotype characteristics on post-extraction dimensional changes of the alveolar ridge: A prospective case series.

AIM: This study was primarily aimed at assessing the effect that specific periodontal phenotypical characteristics have on alveolar ridge remodelling after tooth extraction. MATERIALS AND METHODS: Patients in need of extraction of a non-molar maxillary tooth were enrolled. Baseline phenotypical characteristics (i.e., mid-facial and mid-palatal soft tissue and bone thickness, and supracrestal soft tissue height [STH]) were recorded upon extraction. A set of clinical, digital imaging (linear and volumetric), and patient-reported outcomes were assessed over a 14-week healing period. RESULTS: A total of 78 subjects were screened. Forty-two subjects completed the study. Linear and volumetric bone changes, as well as vertical linear soft tissue and alveolar ridge volume (soft tissue contour) variations, were indicative of a marked dimensional reduction of the alveolar ridge over time. Horizontal facial and palatal soft tissue thickness gain was observed. Thin facial bone (≤1 mm) upon extraction, compared with thick facial bone (>1 mm), was associated with greater linear horizontal (-4.57 ± 2.31 mm vs. -2.17 ± 1.65 mm, p = .003) and vertical mid-facial (-0.95 ± 0.67 mm vs. -4.08 ± 3.52 mm, p < 0.001) and mid-palatal (-2.03 ± 2.08 mm vs. -1.12 ± 0.99 mm, p = 0.027) bone loss, as well as greater total (-34% ± 10% vs. 15% ± 6%, p < 0.001), facial (-51% ± 19% vs. 28% ± 18%, p = 0.040), and palatal bone volume reduction (-26% ± 14% vs. -8% ± 10%, p < 0.001). Aside from alveolar bone thickness, STH was also found to be a predictor of alveolar ridge resorption since this variable was directly correlated with bone volume reduction. Patient-reported discomfort scores progressively decreased over time, and the mean satisfaction upon study completion was 94.5 ± 0.83 out of 100. CONCLUSIONS: Alveolar ridge remodelling is a physiological phenomenon that occurs after tooth extraction. Post-extraction alveolar ridge atrophy is more marked on the facio-coronal aspect. These dimensional changes are more pronounced in sites exhibiting a thin facial bone phenotype (Clinicaltrials.gov NCT02668289).

Errors and complications in clinical periodontal practice due to methodologic bias and bad interpretation of the evidence.

Different types of errors and complications may arise during and after the execution of periodontal or implant-related procedures. Some of the most relevant, although also controversial, and less commented, causative agents of errors and complications are methodological biases and bad interpretation of the evidence. Proper assessment of the literature requires of solid clinical knowledge combined with a systematic approach built on the recognition of common methodological biases and the avoidance of interpretive errors to critically retrieve, dissect, and judiciously apply available information for the promotion of periodontal and peri-implant health. This review addresses common types of methodological bias and interpretive errors that can alter the reader's perceptions on the real effect and potential ramifications of the reported outcomes of a given therapeutic approach due to bad interpretation of the available evidence: (1) types of methodological biases; (2) spin and interpretive bias; (3) interpretation pitfalls when assessing the evidence (4) choice of relevant endpoints to answer the question(s) of interest; and (5) balance between statistical significance and clinical relevance.

Impact of peri-implant soft tissue characteristics on health and esthetics.

OBJECTIVE: To review the impact of key peri-implant soft tissue characteristics on health and esthetics. MAIN CONSIDERATIONS: The keratinized mucosa width (KMW), the mucosal thickness (MT), and the supracrestal tissue height (STH) are essential components of the peri-implant soft tissue phenotype. An inadequate KMW (<2 mm) has been associated with local discomfort upon oral hygiene performance and increased risk for the onset of peri-implant diseases. A minimum buccal MT (≥2 mm) is generally required to prevent esthetic issues related to the effect of transmucosal prosthetic elements on the color of the mucosa and can also contribute to long-term mucosal stability. STH is directly related to marginal bone remodeling patterns during the early healing process that follows the connection of transmucosal prosthetic components. Short STH, generally defined as <3 mm, has been consistently associated with marginal bone loss resulting from the physiologic establishment of the mucosal seal. Insufficient STH may also derive into the fabrication of unfavorable transmucosal prosthetic contours, which frequently results in unpleasing esthetic outcomes and predisposes to submarginal biofilm accumulation. Peri-implant soft tissue dehiscences (PISTDs) are a type of peri-implant deformity that are associated with esthetic issues and often occur in sites presenting KMW, MT, and/or STH deficiencies. PISTDs should be correctly diagnosed and treated accordingly, usually by means of multidisciplinary therapy. CONCLUSION: Understanding the impact of different dimensional and morphologic features of the peri-implant mucosa on health and esthetic outcomes is fundamental to make appropriate clinical decisions in the context of tooth replacement therapy with implant-supported prostheses.

Alveolar ridge preservation: Complications and cost-effectiveness.

Alveolar ridge preservation is routinely indicated in clinical practice with the purpose of attenuating postextraction ridge atrophy. Over the past two decades numerous clinical studies and reviews on this topic have populated the literature. In recent years the focus has primarily been on analyzing efficacy outcomes pertaining to postextraction dimensional changes, whereas other relevant facets of alveolar ridge preservation therapy have remained unexplored. With this premise, we carried out a comprehensive evidence-based assessment of the complications associated with different modalities of alveolar ridge preservation and modeled the cost-effectiveness of different therapeutic modalities as a function of changes in ridge width and height. We conclude that, among allogeneic and xenogeneic bone graft materials, increased expenditure does not translate into increased effectiveness of alveolar ridge preservation therapy. On the other hand, a significant association between expenditure on a barrier membrane and reduced horizontal and vertical ridge resorption was observed, though only to a certain degree, beyond which the return on investment was significantly diminished.

Comparative histological evaluation of intra- and extraorally de-epithelialized connective tissue graft samples harvested from the posterior palate region.

BACKGROUND: Autologous connective tissue graft (CTG) is generally considered the gold standard for peri-implant soft tissue phenotype modification and root coverage therapy. The presence of epithelial remnants in CTG has been associated with complications after soft tissue augmentation surgery. However, a specific method for de-epithelization that is patently superior has not been identified yet. This study aimed to evaluate the effectiveness of two different approaches to de-epithelialize CTG samples harvested from the posterior palate. METHODS: Patients in need of periodontal or implant-related surgery that required harvesting a CTG from the posterior palate region were recruited. CTG samples harvested with an indirect approach were de-epithelialized using either an intraoral (IO group) or an extraoral (EO group) method. Tissue specimens were subsequently processed for histological analysis. The presence or absence of oral epithelial remnants was determined by two examiners using light microscopy. RESULTS: Twenty-four patients, who provided a total of 46 analyzable CTG samples, were enrolled in this study. Histological assessment revealed that 19 out of 22 samples in the IO group were free of epithelial remnants. In the EO group, 20 out of 24 samples did not exhibit epithelial residues. These results translate into 86.4% and 83.3% of epithelium-free samples in the IO and EO groups, respectively. CONCLUSIONS: Although the intraoral method may provide several practical advantages compared with the extraoral technique, both approaches for de-epithelialization of CTG samples harvested from the posterior palate region tested in this study were comparably effective. However, none of these methods ensured complete removal of the oral epithelium in a predictable manner, which should be considered in clinical practice.

Diagnostic reproducibility of the 2018 Classification of Gingival Recession Defects and Gingival Phenotype: A multicenter inter- and intra-examiner agreement study.

BACKGROUND: The aim of this study was to investigate the inter- and intra-examiner agreement among international experts on the diagnosis of gingival recession defects using the 2018 Classification of Gingival Recession Defects and Gingival Phenotype as proposed in the 2017 World Workshop. METHODS: Standardized intraoral photographs from 28 gingival recession defects were evaluated twice by 16 expert periodontists. Recession type (RT), recession depth (RD), keratinized tissue width (KTW), gingival thickness (GT), detectability of the cemento-enamel junction (CEJ), and presence of root steps (RS) were recorded and used for the analysis. Intra- and inter-examiner agreements were calculated for individual variables and for the overall classification. Intraclass correlation coefficient with 95% CI was used for RD and KTW; Kappa with 95% CI was used for GT, CEJ, and RS; quadratic weighted Kappa with 95% CI was used for RT. RESULTS: Overall intra- and inter-examiner agreements were highest for KTW (0.95 and 0.90), lowest for GT (0.75 and 0.41), with the other variables in between (RD: 0.93 and 0.68, RS: 0.87 and 0.65, RT: 0.79 and 0.64, CEJ: 0.75 and 0.57). Overall intra- and inter-examiner agreements for the matrix were 62% and 28%, respectively. Significant effects existed between one variable's measurement and other variables' agreements. CONCLUSIONS: The 2018 Classification of Gingival Recession Defects and Gingival Phenotype is clinically reproducible within the examiners, and when the variables forming the matrix are analyzed individually. The between-examiner agreement for the complete matrix showed lower reproducibility. The agreement was highest for KTW and RD, and least for GT.