Effect of salivary fluid characteristics on the physical features of in vitro bread bolus: From the absence of saliva to artificially simulated hypersalivation.

Saliva facilitates food oral processing, bolus formation, swallowing, and sensory perception, in addition to contributing to oral health and phonation. Ageing, health affections, and polymedication are among many causes altering salivary production, modifying the mastication process, the food impregnation ratio, and in turn altering the characteristics of the bolus, swallowing, and digestion. In this in vitro work, using the AM2 masticator apparatus, which replicates the mechanical actions taking place while chewing solid foods and produces realistic food bolus in various oral conditions, we investigated the effect of salivary fluid characteristics, i.e., composition, quantity (from absence to hypersalivation), temperature, and enzymatic action, on the physical characteristics (i.e., particle size distribution (PSD), bolus mass, salivary fluid content) of in vitro boluses of Traditional French baguette. A ready-to-swallow bolus of baguette displayed on average a d50 value (median particle size by mass) of 4.1 ± 0.4 mm, with saliva fluid constituting âˆ¼ 35 % of the final bolus mass. The absence of saliva in mouth led to a deficient oral processing, forming bread boluses constituted by extremely big particles (ca. 80 % of particles had a size > 7.1 mm) that likely cannot be swallowed safely. On the contrary, an excess of saliva favoured an excessive breaking down of bread, leading to bread boluses constituted by smaller particles than those formed under healthy salivary conditions (d50 decreased from 4.1 mm to 3.1 mm), having a higher salivary fluid content (+10 %). On the other hand, the salivary fluid temperature did not affect PSD, d50, bolus mass, or salivary fluid content of in vitro bread boluses, however, the addition of human salivary α-amylase did, favouring particle size reduction (d50 decreased to 2.6 mm). Therefore, beyond the correlation between bolus hydration by saliva and food properties such as hardness and moisture content, our findings indicate that the quantity of salivary fluid present in the oral cavity and the enzymatic activity of salivary α-amylase during bread mastication significantly influence both the particle size distribution and the fluid content of bread boluses, ultimately determining the physical properties of the bolus and, therefore, potentially impacting the subsequent swallowing process.

Benchmarking of a microgel-reinforced hydrogel-based aqueous lubricant against commercial saliva substitutes.

Xerostomia, the subjective sensation of 'dry mouth' affecting at least 1 in 10 adults, predominantly elders, increases life-threatening infections, adversely impacting nutritional status and quality of life. A patented, microgel-reinforced hydrogel-based aqueous lubricant, prepared using either dairy or plant-based proteins, has been demonstrated to offer substantially enhanced lubricity comparable to real human saliva in in vitro experiments. Herein, we present the benchmarking of in vitro lubrication performance of this aqueous lubricant, both in its dairy and vegan formulation against a range of widely available and employed commercial saliva substitutes, latter classified based on their shear rheology into "liquids", "viscous liquids" and "gels", and also had varying extensional properties. Strikingly, the fabricated dairy-based aqueous lubricant offers up to 41-99% more effective boundary lubrication against liquids and viscous liquids, irrespective of topography of the tested dry mouth-mimicking tribological surfaces. Such high lubricity of the fabricated lubricants might be attributed to their limited real-time desorption (7%) from a dry-mouth mimicking hydrophobic surface unlike the tested commercial products including gels (23-58% desorption). This comprehensive benchmarking study therefore paves the way for employing these microgel-based aqueous lubricant formulations as a novel topical platform for dry mouth therapy.

Paediatric solid oral dosage forms for combination products: Improving in vitro swallowability of minitablets using binary mixtures with pellets.

There is a growing interest in enhancing the acceptability of paediatric pharmaceutical formulations. Solid oral dosage forms (SODF), especially multiparticulates, are being considered as an alternative to liquid formulations, but they may compromise palatability when large volumes are required for dosing. We hypothesised that a binary mixture of multiparticulates for paediatric use, designed to increase the formulation maximum packing fraction, could reduce the viscosity of the mixture in soft food and facilitate swallowing. Using the Paediatric Soft Robotic Tongue (PSRT) - an in vitro device inspired by the anatomy and physiology of 2-year-old children - we investigated the oral phase of swallowing for multi-particulate formulations, i.e., pellets (350 and 700 µm particles), minitablets (MTs, 1.8 mm), and their binary mixtures (BM), by evaluating oral swallowing time, the percentage of particles swallowed, and post-swallow residues. We also conducted a systematic analysis of the effect of the administration method, bolus volume, carrier type, particle size, and particle volume fraction on pellets swallowability. The results demonstrated that the introduction of pellets affected the flowing ability of the carriers, increasing shear viscosity. The size of the pellets did not appear to influence particle swallowability but raising the particle volume fraction (v.f.) above 10% resulted in a decrease in the percentage of particles swallowed. At v.f. 0.4, pellets were easier to swallow (+ 13.1%) than MTs, being the administration method used highly dependent on the characteristics of the multi-particulate formulation under consideration. Finally, mixing MTs with only 24% of pellets improved particle swallowability, achieving swallowing levels similar to those of pellets alone. Thus, combining SODF, i.e., MTs and pellets, improves MT swallowability, and offers new possibilities for adjusting product palatability, being particularly attractive for combination products.

A novel soft robotic pediatric in vitro swallowing device to gain insights into the swallowability of mini-tablets.

Soft robotics could help providing a better understanding of the mechanisms underpinning the swallowability of solid oral dosage forms (SODF), especially by vulnerable populations such as the elderly or children. In this study a novel soft robotic in vitro device is presented, the Pediatric Soft Robotic Tongue (PSRT), inspired by the literature data on the anatomy and physiology of a 2-year-old child. Multi-particulate oral formulations (i.e., mini-tablets (MT)) were considered, including different scenarios such as SODF carrier (i.e., soft-food, liquid), administration methods, SODF size and volume fraction. In vitro results showed that semi-solid foods like yoghurt and apple puree (shear viscosity above âˆ¼ 150 mPa.s at γ̇ = 50 s-1, and its yield stress up to âˆ¼ 5 Pa) may be considered more suitable than thin liquids (i.e., xanthan gum 0.25 %) for swallowing MT. However, the reduction of MT size did not bring any benefit in terms of swallowability in the range studied. Regarding the administration method, spreading MT on top of a teaspoon full of carrier should be preferred over mixing MT with the carrier or placing MT on the tongue first to favour their swallowability. Finally, and under the in vitro conditions studied using yoghurt as carrier, it would be possible to increase the volume fraction of SODF up to 0.20 without influencing swallowability according to the three parameters evaluated (% of MT swallowed, bolus velocity, and post-swallow residues). These results should help to design more focused sensory and/or clinical tests to improve product formulation and patient acceptability.

Molecular Understanding of Fouling Induction and Removal: Effect of the Interface Temperature on Milk Deposits.

Molecular details concerning the induction phase of milk fouling on stainless steel at an elevated temperature range were established to better understand the effect of temperature on surface fouling during pasteurization. The liquid-solid interface that replicates an industrial heat exchanger (≤75°C), including four stages (preheating, heating, holding, and cooling), was investigated using both a quartz crystal microbalance (QCM-D) and a customized flow cell. We found that the milk fouling induction process is rate-limited by the synergistic effects of bulk reactions, mass transfer, and surface reactions, all of which are controlled by both liquid and surface temperatures. Surface milk foulant becomes more rigid and compact as it builds up. The presence of protein aggregates in the bulk fluid leads to a fast formation of surface deposit with a reduced Young's modulus. Foulant adhesion and cohesion strength was enhanced as both interfacial temperature and processing time increased, while removal force increased with an increasing deposit thickness. During cleaning, caustic swelling and removal showed semilinear correlations with surface temperature (TS), where higher TS reduced swelling and enhanced removal. Our findings evidence that adsorption kinetics, characteristics of the foulant, and the subsequent removal mechanism are greatly dependent on the temperature profile, of which the surface temperature is the most critical one.