Removal of copper (II) from aqueous solution by adsorption onto low-cost adsorbents.

The use of low-cost adsorbents was investigated as a replacement for current costly methods of removing metals from aqueous solution. Removal of copper (II) from aqueous solution by different adsorbents such as shells of lentil (LS), wheat (WS), and rice (RS) was investigated. The equilibrium adsorption level was determined as a function of the solution pH, temperature, contact time, initial adsorbate concentration and adsorbent doses. Adsorption isotherms of Cu (II) on adsorbents were determined and correlated with common isotherm equations such as Langmuir and Freundlich models. The maximum adsorption capacities for Cu (II) on LS, WS and RS adsorbents at 293, 313 and 333 K temperature were found to be 8.977, 9.510, and 9.588; 7.391, 16.077, and 17.422; 1.854, 2.314, and 2.954 mg g(-1), respectively. The thermodynamic parameters such as free energy (delta G0), enthalpy (delta H0) and entropy changes (delta S0) for the adsorption of Cu (II) were computed to predict the nature of adsorption process. The kinetics and the factors controlling the adsorption process were also studied. Locally available adsorbents were found to be low-cost and promising for the removal of Cu (II) from aqueous solution.

Equilibrium and kinetics studies for adsorption of direct blue 71 from aqueous solution by wheat shells.

This paper deals with the application of wheat shells (WS), an agricultural by-product, for the removal of direct blue 71 (DR) from aqueous solution. The characteristics of WS surface, such as surface area, Bohem titration and scanning electron microscopy (SEM) were obtained. The removal of direct blue 71 onto WS from aqueous solution was investigated by using parameters, such as pH, temperature, adsorbent dose, contact time and initial concentration. The adsorption process attains equilibrium within 36 h. The extent of dye removal decreased with increasing adsorbent dosage and also increased with increasing contact time, temperature, in solution concentration. Optimum pH value for dye adsorption was determined between 6 and 8. The experimental data were analysed by the Langmuir and Freundlich models of adsorption. It was found that the Langmuir equation fit better than the Freundlich equation. Maximum adsorption capacity (Q(m)) was calculated as at different temperatures (293, 303 and 313 K) 40.82, 45.66 and 46.30 mgg(-1), respectively. In addition, the adsorption data obtained at different temperatures of DR by WS were applied to pseudo first-order, pseudo second-order and Weber-Morris equations, and the rate constants of first-order adsorption (k(1)), the rate constants of second-order adsorption (k(2)) and intraparticle diffusion rate constants (k(3)) at these temperatures were calculated, respectively. The rates of adsorption were found to conform to pseudo second-order kinetics with good correlation (R(2)>or=0.9904). Also, free energy of adsorption (DeltaG degrees), enthalpy (DeltaH degrees), and entropy (DeltaS degrees) changes were determined to predict the nature of adsorption. Furthermore, the results indicate that WS could be employed as a low-cost alternative to other adsorbents in the removal of direct blue 71 from aqueous solution.

Use of natural dye-casein complexes: effect of proteolytic treatment.

The activity of proteolytic enzymes is commonly measured using casein as a substrate. A modified caseinolysis assay was developed with natural dyes such as juglone, lawsone, berberine, and quercetin for Subtilisin carlsberg, protease type XVI, and trypsin, respectively. The pH dependence and incubation time were determined. K(m), V(max), and k(cat)/K(m) values were also determined for these enzymes. Lawsone was found to be a better substrate than the others.

A new method: measurement of microleakage volume using human, dog and bovine permanent teeth

This study investigates the feasibility of a different new approach to determining the microleakage volume associated with dental restorations (Class V cavity restorated with glass ionomer cement + high copper amalgam) and the relative marginal adaptation deficiency of dog, bovine and human permanent teeth in in vitro conditions. Also researched is the appropriateness of using dog and bovine teeth in in vitro studies rather than human teeth. Our method utilizes the molecular adsorption characteristics of methylene blue. Within the framework of this study, 60 permanent teeth (20 human, 20 dogs and 20 bovine) were used. These groups were evaluated statistically, of which indicated no statistically significant differences (p > 0.05). It was also concluded that this preliminary investigation showed that the new microleakage volume measurement method may be a valuable new technique for the in vitro study of microleakage dynamics around dental restorations.