Antimicrobial Fibrous Bandage-like Scaffolds Using Clove Bud Oil.

Wounds are characterised by an anatomical disruption of the skin; this leaves the body exposed to opportunistic pathogens which contribute to infections. Current wound healing bandages do little to protect against this and when they do, they can often utilise harmful additions. Historically, plant-based constituents have been extensively used for wound treatment and are proven beneficial in such environments. In this work, the essential oil of clove bud (Syzygium aromaticum) was incorporated in a polycaprolactone (PCL) solution, and 44.4% (v/v) oil-containing fibres were produced through pressurised gyration. The antimicrobial activity of these bandage-like fibres was analysed using in vitro disk diffusion and the physical fibre properties were also assessed. The work showed that advantageous fibre morphologies were achieved with diameters of 10.90 ± 4.99 µm. The clove bud oil fibres demonstrated good antimicrobial properties. They exhibited inhibition zone diameters of 30, 18, 11, and 20 mm against microbial colonies of C. albicans, E. coli, S. aureus, and S. pyogenes, respectively. These microbial species are commonly problematic in environments where the skin barrier is compromised. The outcomes of this study are thus very promising and suggest that clove bud oil is highly suitable to be applied as a natural sustainable alternative to modern medicine.

Severe Acute Respiratory Syndrome Type 2-Causing Coronavirus: Variants and Preventive Strategies.

COVID-19 vaccines have constituted a substantial scientific leap in countering severe acute respiratory syndrome type 2-causing coronavirus (SARS-CoV-2), and worldwide implementation of vaccination programs has significantly contributed to the global pandemic effort by saving many lives. However, the continuous evolution of the SARS-CoV-2 viral genome has resulted in different variants with a diverse range of mutations, some with enhanced virulence compared with previous lineages. Such variants are still a great concern as they have the potential to reduce vaccine efficacy and increase the viral transmission rate. This review summarizes the significant variants of SARS-CoV-2 encountered to date (December 2021) and discusses a spectrum of possible preventive strategies, with an emphasis on physical and materials science.

Nano-co-delivery of lipophosphoglycan with soluble and autoclaved leishmania antigens into PLGA nanoparticles: Evaluation of in vitro and in vivo immunostimulatory effects against visceral leishmaniasis.

The aim of the present study was to encapsulate lipophosphoglycan molecule (LPG) which is one of the most immunogenic antigens of Leishmania parasites into PLGA nanoparticles with autoclaved or soluble leishmanial antigens, characterize synthetized nanoparticles with different methods and evaluate their in vitro/in vivo immunostimulatory activities to develop new vaccine candidates. PLGA nanoparticles including LPG and autoclaved leishmania antigen (ALA) or soluble leishmania antigen (ALA) were synthetized by double emulsion solvent evaporation method. The synthetized nanoparticles were characterized by SEM and Zeta-sizer instruments for determination of size, zeta potentials and polydispersity index (PDI) values. The antigen release profiles and encapsulation efficiencies were determined by UV-Vis spectroscopy. Griess reaction and ELISA tests were used for measurements of produced nitric oxide (NO) and cytokine levels of macrophages and splenocytes treated with nanoparticles. For determination of protective effects of nanoparticles, parasite reduction in livers and spleens of immunized mice were calculated by LDU values post-infection. According to results, (SLA-LPG) PLGA NPs and (ALA-LPG) PLGA NPs possessed the sizes of 253 and 307 nm respectively. Antigen-loaded nanoparticles elevated the released NO amounts from macrophages for 14 and 18-folds in contrast to control. Furthermore, synthetized nanoparticles significantly triggered macrophages to produce excessive levels of IFN-γ and IL-12 cytokines. Besides it was detected that vaccination of mice with (SLA-LPG) PLGA NPs and (ALA-LPG) PLGA NPs elicited approximately 80% protection from Visceral Leishmaniasis. Furthermore, (SLA-LPG) PLGA NPs and (ALA-LPG) PLGA NPs lead to 10 to 14-folds increase in secreted Th1 cytokine levels from splenocytes than control demonstrating abundantly stimulation of T cell response following to vaccination with nano-vaccine formulations. These results reveal that both (SLA-LPG) PLGA NPs and (ALA-LPG) PLGA NPs have excellent immunostimulatory activities and they are promising nanovaccine formulations for the prevention of leishmaniasis in near future.

Surface interactions and viability of coronaviruses.

The recently emerged coronavirus pandemic (COVID-19) has become a worldwide threat affecting millions of people, causing respiratory system related problems that can end up with extremely serious consequences. As the infection rate rises significantly and this is followed by a dramatic increase in mortality, the whole world is struggling to accommodate change and is trying to adapt to new conditions. While a significant amount of effort is focused on developing a vaccine in order to make a game-changing anti-COVID-19 breakthrough, novel coronavirus (SARS-CoV-2) is also developing mutations rapidly as it transmits just like any other virus and there is always a substantial chance of the invented antibodies becoming ineffective as a function of time, thus failing to inhibit virus-to-cell binding efficiency as the spiked protein keeps evolving. Hence, controlling the transmission of the virus is crucial. Therefore, this review summarizes the viability of coronaviruses on inanimate surfaces under different conditions while addressing the current state of known chemical disinfectants for deactivation of the coronaviruses. The review attempts to bring together a wide spectrum of surface-virus-cleaning agent interactions to help identify material selection for inanimate surfaces that have frequent human contact and cleaning procedures for effective prevention of COVID-19 transmission.

A nanotechnology-based new approach in the treatment of breast cancer: Biosynthesized silver nanoparticles using Cuminum cyminum L. seed extract.

The present study reports the anticancer activities of Cuminum cyminum L. (Cumin) seed extract, chemically synthetized silver nanoparticles (AgNPs) and biosynthesized silver nanoparticles (Bio-AgNPs) from Cumin seeds on human breast adenocarcinoma cell line (MCF-7) and human breast adenocarcinoma metastatic cell line (AU565). The synthetized nanoparticles were characterized by dynamic light scattering (DLS), UV-visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). The cytotoxic and anticancer effects of AgNPs and Bio-AgNPs were determined by MTT assay. According to the cytotoxicity analysis, Bio-AgNPs appears to be less toxic against J774 macrophage cells than AgNPs since IC50 values were measured as 0.75 and 1.25 µg/ml for AgNPs and Bio-AgNPs, respectively. On the other hand, Bio-AgNPs demonstrated significant inhibitory effects on human breast cancer cells at non-toxic concentrations such as 0.25 and 0.5 µg/ml. However, at increased concentrations, the lethal effects of AgNPs on breast cancer cells were higher than Bio-AgNPs. When cytotoxic and anticancer characteristics of Cumin extract were investigated, it was established that it did not show any inhibitory effect on J774 cells, while killing the half of MCF-7 cells at investigated concentrations. Interestingly, Cumin extract gave rise to no inhibitory effects against AU565 cells. On the other hand, AgNPs and Bio-AgNPs exhibited considerable anticancer activities on both cell lines. The inhibition percentages of AgNPs on MCF-7 and AU565 cell lines were respectively evaluated as 95% and 97% at the highest concentrations applied (12.5 µg/ml). Similarly, we determined that 87.5% and 96% of MCF-7 and AU565 cells were respectively inhibited when they were exposed to the highest concentrations of Bio-AgNPs. Considering relatively toxic-free features of Bio-AgNPs prepared from Cuminum cyminum L. seed extracts, it can be thought that this formulation will be a pioneer in development of nanotechnology-based new anticancer drug for the treatment of breast cancer in near future.

Fiber Forming Capability of Binary and Ternary Compositions in the Polymer System: Bacterial Cellulose-Polycaprolactone-Polylactic Acid.

Bacterial Cellulose (BC) has over recent decades shown great versatility in wound healing dressings, but is difficult to spin fibers with at high concentrations. An investigation into the preparation of bandage-like fibrous meshes is carried out to determine the optimal blend of polycaprolactone (PCL) and polylactic acid (PLA) as a suitable carrier for BC. Using a simple centrifugal spinning setup, polymer blends of PCL, PLA and BC are investigated as a ternary system to determine the most suitable composition with a focus on achieving maximal BC concentration. It is found that BC content in the fibers above 10 wt % reduced product yield. By creating blends of PLA-PCL fibers, we can create a more suitable system in terms of yield and mechanical properties. The fibrous samples are examined for yield, fiber morphology using scanning electron microscopy, mechanical properties using tensile testing and chemical characteristics using Fourier-transform infrared spectroscopy. A fibrous scaffold with > 30 wt % BC was produced with enhanced mechanical properties owing to the blending of PLA and PCL.

Anti-fungal bandages containing cinnamon extract.

Cinnamon-containing polycaprolactone (PCL) bandages were produced by pressurised gyration and their anti-fungal activities against Candida albicans were investigated. It was found that by preparing and spinning polymer solutions of cinnamon with PCL, fibres capable of inhibiting fungal growth could be produced, as observed in disk diffusion tests for anti-fungal susceptibility. Fascinatingly, compared with raw cinnamon powder, the novel cinnamon-loaded fibres had outstanding long-term activity. The results presented here are very promising and may indeed accelerate a new era of using completely natural materials in biomedical applications, especially in wound healing.

Novel electrospun polycaprolactone/graphene oxide/Fe3O4 nanocomposites for biomedical applications.

In this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe3O4) nanocomposite fibers as biocompatible scaffolds for biomedical applications. Products were analyzed by scanning electron microscopy (SEM) for morphological analysis of the electrospun nanocomposites and Fourier Transform Infrared Spectroscopy (FTIR) was used to determine functional groups of the PCL, GO, and Fe3O4 materials in the electrospun nanocomposites. For physical properties, viscosity, density, permittivity, dielectric loss and liquid and solid state alternating current conductivity, measurements were done for each nanocomposite fibers. Effects of concentration percentage of GO on permittivity, dielectric loss and AC conductivity have been analyzed by using measured and calculated data. Trend lines have been drawn for permittivity, dielectric loss and conductivity via concentration percentage of GO. The relation between ac conductivity and frequency have been studied for each concentration percentage of GO and interpretations have been done by using the obtained results.

Cellular interactions with bacterial cellulose: Polycaprolactone nanofibrous scaffolds produced by a portable electrohydrodynamic gun for point-of-need wound dressing.

Electrospun nanofibrous scaffolds are promising regenerative wound dressing options but have yet to be widely used in practice. The challenge is that nanofibre productions rely on bench-top apparatuses, and the delicate product integrity is hard to preserve before reaching the point of need. Timing is critically important to wound healing. The purpose of this investigation is to produce novel nanofibrous scaffolds using a portable, hand-held "gun", which enables production at the wound site in a time-dependent fashion, thereby preserving product integrity. We select bacterial cellulose, a natural hydrophilic biopolymer, and polycaprolactone, a synthetic hydrophobic polymer, to generate composite nanofibres that can tune the scaffold hydrophilicity, which strongly affects cell proliferation. Composite scaffolds made of 8 different ratios of bacterial cellulose and polycaprolactone were successfully electrospun. The morphological features and cell-scaffold interactions were analysed using scanning electron microscopy. The biocompatibility was studied using Saos-2 cell viability test. The scaffolds were found to show good biocompatibility and allow different proliferation rates that varied with the composition of the scaffolds. A nanofibrous dressing that can be accurately moulded and standardised via the portable technique is advantageous for wound healing in practicality and in its consistency through mass production.

Fabrication of naturel pumice/hydroxyapatite composite for biomedical engineering.

BACKGROUND: We evaluated the Bovine hydroxyapatite (BHA) structure. BHA powder was admixed with 5 and 10 wt% natural pumice (NP). Compression strength, Vickers micro hardness, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction studies were performed on the final NP-BHA composite products. The cells proliferation was investigated by MTT assay and SEM. Furthermore, the antimicrobial activity of NP-BHA samples was interrogated. RESULTS: Variances in the sintering temperature (for 5 wt% NP composites) between 1000 and 1300 °C, reveal about 700 % increase in the microhardness (~100 and 775 HV, respectively). Composites prepared at 1300 °C demonstrate the greatest compression strength with comparable result for 5 wt% NP content (87 MPa), which are significantly better than those for 10 wt% and those that do not include any NP (below 60 MPa, respectively). CONCLUSION: The results suggested the optimal parameters for the preparation of NP-BHA composites with increased mechanical properties and biocompatibility. Changes in micro-hardness and compression strength can be tailored by the tuning the NP concentration and sintering temperature. NP-BHA composites have demonstrated a remarkable potential for biomedical engineering applications such as bone graft and implant.

Varicocele and epididymitis in Behcet disease.

OBJECTIVE: Behçet disease is a systemic disease with protean manifestations. Vasculitis is a hallmark of the disease and may involve arteries, veins, and capillaries. Varicocele is dilatation of the pampiniform plexus veins. We aimed to investigate the incidence of varicocele in patients with Behçet disease. METHODS: The study included 47 male patients with Behçet disease and 31 healthy control participants. All underwent a clinical evaluation including a medical history and systemic and scrotal examinations. Subsequently, 2 investigators blinded to the clinical data performed sonographic examinations and measured pampiniform plexus vein diameters. RESULTS: The mean age of the patients ± SD was 23.4 ± 3.2 years; disease durations ranged from 3 to 120 months (46 ± 31 months). Scrotal pain or a palpable mass was detected by clinical examination in 24 patients with Behçet disease (51.1%) and 5 healthy participants (16.1%; P = .002). By color Doppler examination, left varicocele was diagnosed in 26 patients with Behçet disease (55.3%) and 9 healthy participants (29%; P = .02). All patients with right varicocele also had left varicocele; that condition was detected in 10.6% (5 patients) of the Behçet disease group and 6.4% (2 patients) of the control group (P > .05). Eight patients with Behçet disease (17%) had epididymitis, whereas none of the healthy participants did (P = .019, Fisher exact test). Genital ulcers and erythema nodosum lesions were more common among patients with varicocele (P = .034 and .058, respectively). There were no differences in smoking, epididymitis, arthritis, uveitis, or other clinical parameters for distinguishing varicocele in patients with Behçet disease. CONCLUSIONS: The incidence of varicocele was increased in Behçet disease. Whether varicocele confers fertility problems in patients with Behçet disease and the underlying mechanism for a possible association are yet to be determined.