Copolymers Derived from Two Active Esters: Synthesis, Characterization, Thermal Properties, and Reactivity in Post-Modification.

Copolymers with two distinguished reactive repeating units are of great interest, as such copolymers might open the possibility of obtaining selective and/or consequent copolymers with different chemical structures and properties. In the present work, copolymers based on two active esters (pentafluorophenyl methacrylate and p-nitrophenyl methacrylate) with varied compositions were synthesized by Cu(0)-mediated reversible deactivation radical polymerization. This polymerization technique allows the preparation of copolymers with high to quantitative conversion of both comonomers, with moderate control over dispersity (D = 1.3-1.7). Additionally, by in-depth study on the composition of each copolymer by various techniques including elemental analysis, NMR, FT-IR, and XPS, it was possible to confirm the coherence between expected and obtained composition. Thermal analyses by DSC and TGA were implemented to investigate the relation between copolymers' composition and their thermal properties. Finally, an evaluation of the difference in reactivity of the two monomer moieties was confirmed by post-modification of copolymers with a primary amine and a primary alcohol as the model.

Self-assembled multifunctional core-shell highly porous metal-organic framework nanoparticles.

Core-shell nanoparticles (NPs) are attracting increasing interest in nanomedicine as they exhibit unique properties arising from the combined assets of core and shell materials. Porous nanoscale metal-organic frameworks (nanoMOFs) are able to incorporate with high payloads a large variety of drugs. Like other types of NPs, nanoMOFs need to be functionalized with engineered coatings to ensure colloidal stability, control in vivo fate and drug release. To do so, a novel biodegradable cyclodextrin (CD)-based shell was designed in this study. Water soluble γ-CD-citrate oligomers grafted or not with fluorophores were successfully synthesized using citric acid as crosslinker and efficiently anchored onto the surface of porous nanoMOFs. As compared to monomeric CDs, the oligomeric CD coatings could offer higher interaction possibilities with the cores and better possibilities to graft functional moieties such as fluorescent molecules. The amounts of γ-CD-citrate oligomers onto the nanoMOFs were as high as 53 ± 8 wt%. The yield reached up to 86% in the optimized system. These core-shell nanocomposites were stable upon storage, in contrast to the naked nanoMOFs. In addition, the presence of the coating prevented the doxorubicin (DOX)-loaded nanoMOFs from aggregation. Moreover, due to the presence of fluorophores conjugated to the shell, fluorescence-lifetime microscopy enabled deciphering the coating mechanism. DOX loadings reached 48 ± 10 wt% after 24 h incubation with the drug solution. After coating for additional 24 h, DOX loadings reached 65 ± 8 wt%.

Irradiation Effects on Polymer-Grafted Gold Nanoparticles for Cancer Therapy.

In the context of cancer treatment, gold nanoparticles (AuNPs) are considered as very promising radiosensitizers. Here, well-defined polymer-grafted AuNPs were synthesized and studied under gamma irradiation to better understand the involved radiosensitizing mechanisms. First, various water-soluble and well-defined thiol-functionalized homopolymers and copolymers were obtained through atom transfer radical polymerization. They were then used as ligands in the one-step synthesis of AuNPs, which resulted in stable hybrid metal-polymer nanoparticles. Second, these nano-objects were irradiated in solution by γ rays at different doses. Structures were fully characterized through size exclusion chromatography, small-angle X-ray scattering, and small-angle neutron scattering measurements, prior to and after irradiation. We were thus able to quantify and to localize radiation impacts onto the grafted polymers, revealing the production sites of reactive species around AuNPs. Both external and near-surface scissions were observed. Interestingly, the ratio between these two effects was found to vary according to the nature of polymer ligands. Medium-range and long-distance dose enhancements could not be identified from the calculated scission yields, but several mechanisms were considered to explain high yields found for near-surface scissions. Then cytotoxicity was shown to be equivalent for both nonirradiated and irradiated polymer-grafted NPs, which suggested that released polymer fragments were nontoxic. Finally, the potential to add bioactive molecules such as anticancer drugs has been explored by grafting doxorubicin onto the polymer corona. This may lead to nano-objects combining both radiosensitization and chemotherapy effects. This work is the first one to study in details the impact of radiation on radiosensitizing nano-objects combining physical, chemical, and biological analyses.

Modification of a cyclo-olefin surface by radio-sterilization: is there any effect on the interaction with drug solutions?

A cyclo-olefin copolymer was subjected to an e-beam ionizing treatment. Two doses were studied: one corresponding to the recommended dose for the sterilization of pharmaceutical packaging (25 kGy), and a greater one to enhance the modifications caused by the treatment (150 kGy). The surface modifications were studied by X-ray photoelectron spectroscopy (XPS), contact angle measurements and atomic force microscopy (AFM). The roughness and the wettability of the surface were enhanced by the treatment. The consequences of the surface modifications on the drug interaction with the polymer were studied.

A multiscale approach to assess the complex surface of polyurethane catheters and the effects of a new plasma decontamination treatment on the surface properties.

Polyurethane catheters made of Pellethane 2363-80AE® were treated with a low temperature plasma developed for the decontamination of reusable polymer devices in hospitals. We investigated the modifications of the polymer surface by studying the topographic modifications, the chemical modifications, and their consequences on the wettability and bacterial adhesion. This study showed that plasma treatment modified the topography and grafted oxygen and nitrogen species onto the surface, resulting in an increase in the surface polarity. This effect could be correlated to the number of nitrogen atoms interacting with the surface. Moreover, this study demonstrated the significance of multiscale heterogeneities, and the complexity of industrial medical devices made from polymers. Their surface can be heterogeneous, and they contain additives that can migrate and change the surface composition.

Busulfan loading into poly(alkyl cyanoacrylate) nanoparticles: physico-chemistry and molecular modeling.

The busulfan is an alkylating agent widely used for the treatment of haematological malignancies and nonmalignant disorders. For a long time, it has been available only in an oral form. This treatment leads to a wide variability in bioavailability and side effects such as the veino-occlusive disease. Thus, an intravenous formulation of busulfan-loaded nanoparticles may be considered as a major progress. This study deals with busulfan entrapment by nanoprecipitation into five different types of poly(alkyl cyanoacrylate) polymers. The polymers leading to the highest busulfan loading efficiencies were poly(isobutyl cyanoacrylate) (PIBCA) and poly(ethyl cyanoacrylate). Molecular modeling along with energy minimization process was employed to identify the nature of the interactions occurring between busulfan and PIBCA. Further, optimization studies enabled to obtain PIBCA nanoparticles displaying busulfan loading ratios equal to 5.9% (w/w) together with nanoparticle yields of 71% (w/w). Since busulfan is a highly reactive molecule, we performed (1)H-NMR spectroscopy experiments showing that chemical integrity of the drug was preserved after loading into nanoparticles. The in vitro release studies under sink conditions, in water, or in rat plasma showed a fast release in the first 10 min followed by a slower one over 6 h. This phenomenon could be explained by the semi-polar characteristics of busulfan.