Formulation of hesperidin-loaded in situ gel for ocular drug delivery: a comprehensive study.

BACKGROUND: Allergic conjunctivitis is one of the most common eye disorders. Different drugs are used for its treatment. Hesperidin is an active substance isolated from Citrus sinensis L. (Rutaceae) fruit peels, with known anti-inflammatory activity but low solubility. It was complexed with cyclodextrin and encapsulated in situ gel to extend its duration in the eye. RESULTS: The optimized formulation comprised 1% hesperidin, 1.5% hydroxyethyl cellulose, and 16% poloxamer 407. The viscosity at 25 °C was 492 ± 82 cP, and at 35 °C it was 8875 ± 248 cP, the pH was 7.01 ± 0.03, gelation temperature was 34 ± 1.3 °C, and gelation time was 33 ± 1.2 s. There was a 66% in vitro release in the initial 2 h, with a burst effect. A lipoxygenase (LOX) inhibition test determined that hesperidin was active at high doses on leukotyrens seen in the body in allergic diseases. In cell-culture studies, the hesperidin cyclodextrin complex loaded in situ gel, BRN9-CD (poloxamer 16%, hydroxy ethyl cellulose (HEC) 1.5%), enhanced cell viability in comparison with the hesperidin solution. It was determined that BRN9-CD did not cause any irritation in the ocular tissues in the Draize test. CONCLUSION: The findings of this study demonstrate the potential of the in situ gel formulation of hesperidin in terms of ease of application and residence time on the ocular surface. Due to its notable LOX inhibition activity and positive outcomes in the in vivo Draize test, it appears promising for incorporation into pharmaceutical formulations. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Formulation development of Lornoxicam loaded heat triggered ocular in-situ gel using factorial design.

OBJECTIVE: In the current research, lornoxicam-loaded in situ gels were developed, and their potential usage in ocular inflammation was evaluated. SIGNIFICANCE: Lornoxicam cyclodextrin complex prepared with hydroxypropyl methylcellulose and poloxamer P407 because of the low viscosity of in situ gels to provide easy application. However, washing and removing it from the ocular surface becomes difficult due to the gelation formation with heat. METHODS: A three-level factorial experimental design was used to evaluate the effects of poloxamer 407 concentration, polymer type, and polymer concentration on viscosity, pH, gelation capacity, gelation time, and gelation temperature, which were considered the optimal indicators of lornoxicam-containing formulations. RESULTS: As a result of the three-level factorial experimental design, the optimized formulation contained 15 (%w/v) poloxamer 407 and 1 (%w/v) hydroxypropyl methylcellulose. The optimize formulation viscosity 25 °C = 504 ± 49cP, viscosity 35 °C = 11247 ± 214cP, pH = 6.80 ± 0.01, gelation temprature = 35 ± 0.2 °C, and gelation time= 34 ± 0.2 s was obtained. In the in vitro release studies, 68% of lornoxicam was released with a burst effect in the first three hours; then, the release continued for eight hours with controlled release. Release kinetics of the formulations were modeled mathematically, and it was found to be compatible with the Korsemeyer-Peppas and Weibull models. In cell culture studies, cell viability at 100 µg/mL was 83% and 96% for NL6 and NL6-CD, respectively. In Draize's in vivo test, no negative conditions occurred in rats. CONCLUSIONS: Therefore, the NL6-CD formulation has the potential to be a favorable option for treating ocular inflammation.

Design of Besifloxacin HCl-Loaded Nanostructured Lipid Carriers: In Vitro and Ex Vivo Evaluation.

Objective: In the treatment of severe cases of bacterial keratitis, conventional eye drops containing antibiotics should be applied daily and very frequently. The aim of this study is to develop low-dose high-effect formulations with the prepared nanostructured lipid carrier (NLC) formulations to reduce antibiotic resistance and increase patient compliance. Methods: NLC formulations were loaded with besifloxacin HCl (BHL) and the besifloxacin HCl: sulfobutyl ether beta-cyclodextrin (SBE-CD) complex. Positive charge was gained with chitosan, and corneal permeation and resolubility were increased with SBE-CD. In vitro characterization studies, permeability studies, and cytotoxicity and ex vivo transport studies were carried out. Results: In this study, it was found that SBE-CD increased BHL's solubility by 8-fold based on phase solubility studies. The optimized NLCs were small in size (13.63-16.09 nm) with a low polydispersity index (0.107-0.181) and adequate BHL drug loading efficiency. In vitro release studies showed that formulations were released approximately for 8 h and at levels over the minimum inhibitory concentration of Pseudomonas aeruginosa and Staphylococcus aureus. NLC formulations had a better corneal permeation rate than the marketed product during 6 h of ex vivo studies. Conclusions: According to in vitro and ex vivo data, it was determined that the most favorable NLC formulation was the formulation containing BHL/SBE-CD that was covered with chitosan. It has the highest drug loading capacity and one of the highest ex vivo corneal passage levels, along with desired drug release. The formulation containing BHL/SBE-CD and chitosan can be a potential alternative for the treatment of bacterial keratitis.

Novel Drug Delivery Systems to Improve the Treatment of Keratitis.

Keratitis is a disease characterized by inflammation of the cornea caused by different pathogens. It can cause serious visual morbidity if not treated quickly. Depending on the pathogen causing keratitis, eye drops containing antibacterial, antifungal, or antiviral agents such as besiloxacin, moxifloxacin, ofloxacin, voriconazol, econazole, fluconazole, and acyclovir are used, and these drops need to be applied frequently due to their low bioavailability. Studies are carried out on formulations with extended residence time in the cornea and increased permeability. These formulations include various new drug delivery systems such as inserts, nanoparticles, liposomes, niosomes, cubosomes, microemulsions, in situ gels, contact lenses, nanostructured lipid carriers, carbon quantum dots, and microneedles. Ex vivo and in vivo studies with these formulations have shown that the residence time of the active substances in the cornea is prolonged, and their ocular bioavailability is increased. In addition, in vivo studies have shown that these formulations successfully treat keratitis. However, it has been observed that fluoroquinolones are used in most of the studies; similar drug delivery systems are generally preferred for antifungal drugs, and studies for viral and acanthameba keratitis are limited. There is a need for new studies on different types of keratitis and different drug active substances. At the same time, proving the efficacy of drug delivery systems, which give promising results in in vivo animal models, with clinical studies is of great importance for progress in the treatment of keratitis.

Development of besifloxacin HCl loaded nanofibrous ocular inserts for the treatment of bacterial keratitis: In vitro, ex vivo and in vivo evaluation.

Novel drug delivery systems have emerged to treat bacterial keratitis, an acute infection of the cornea. In this study, besifloxacin HCl loaded insert formulations were designed and investigated in vitro, ex vivo and in vivo for the treatment of bacterial keratitis. Besifloxacin HCl (BH) or BH-hydroxypropyl-beta-cyclodextrin (HP-ß-CD) complex containing poly(caprolactone)/polyethylene glycol (PLC/PEG) fibrous inserts were prepared with an electrospinning method. These fibrous inserts were coated with mucoadhesive polymers such as sodium alginate (SA) or thiolated sodium alginate (TSA). Developed inserts compared to commercially available drug and it was found that coating of the insert surfaces with SA and TSA, increases bioadhesion of the formulations. Insert formulations showed a burst release in the first 2 days followed by a slow-release profile. Ex vivo transport studies showed that HP-ß-CD possessed a drug delivery level close to the commercial drug. Both TSA coated inserts as well as inserts containing HP-ß-CD-drug complex were effectively reducing bacterial keratitis in rabbit eyes upon single-dose application compared to multiple dosing with the commercial drug. Consequently, TSA coated inserts as well as the inserts containing HP-ß-CD-drug complex, may be potential alternatives to conventional market product by reducing the application frequency in the clinic leading to increased patient compliance.

Design of ocular drug delivery platforms and in vitro - in vivo evaluation of riboflavin to the cornea by non-interventional (epi-on) technique for keratoconus treatment.

AIM: Keratoconus is a common and progressive eye disease characterized by thinning and tapering of the cornea. This degenerative eye disease is currently treated in the clinic with an interventional technique ("epi-off") that can cause serious side effects as a result of the surgical procedure. The aim of this project is to design innovative formulations for the development of a riboflavin-containing medicinal product to develop a non-invasive ("epi-on") keratoconus treatment as an alternative to current treatment modalities. METHODS: Nanostructured lipid carriers (NLCs) were successfully loaded with either riboflavin base of riboflavin-5-phosphate sodium and designed with either Stearylamine (positive charge) or Trancutol P (permeation enhancer). In vitro characterization studies, cytotoxicity and permeability studies were performed. Selected formulations and commercial preparations were applied and compared in ex-vivo corneal drug accumulation and transition studies. Furthermore, in vivo studies were performed to assess drug accumulation in the rat cornea and the corneal stability after NLC treatment was investigated via a biomechanical study on isolated rabbit corneas. RESULTS: Both in vitro and ex-vivo as well as in vivo data showed that from the prepared NLC formulations, the most effective formulation was riboflavin-5-phosphate sodium containing NLC with Transcutol P as permeation enhancer. It possessed the highest drug loading content, low accumulation in the cornea but high permeability through the cornea as well as the highest functional performance in corneal crosslinking. CONCLUSION: Topical application of riboflavin-5-phosphate sodium loaded NLC systems designed with permeation enhancer Transcutol P may act as a potential alternative for non-invasive keratoconus treatments.

Design and in vitro evaluation of tenofovir-loaded vaginal gels for the prevention of HIV infections.

Infection with the human immunodeficiency virus (HIV) is affecting women disproportionally with increasing incidence rates over the last decades. Tenofovir is one of the most commonly used antiretroviral agents, which belongs to the nucleoside/nucleotide reverse transcriptase inhibitor family, for the prevention of HIV acquisition. In scope of this study, a thermogelling system containing tenofovir-loaded chitosan nanoparticles for the controlled release of tenofovir was developed and characterized. The in vitro release studies have shown that the burst release effect was decreased to 27% with f-TFV CS NPs-Gel. Gelation temperature of developed formulation was found as 26.6 ± 0.2 °C, which provides ease of administration while gelation occurs after the administration to the vagina. The work of adhesion values was used as parameters for comparison of mucoadhesive performance and the mucoadhesion of f-TFV CS NPs-Gel was found as 0.516 ± 0.136 N.s at 37 °C. The biocompatibility of blank formulations was evaluated by cell viability studies using L929 cells, in which Gel + CS NPs formulation was found to be safe with 82.4% and 90.2% cell viability for 1:16 and 1:32 dilutions, respectively. In conclusion, an improved tenofovir containing vaginal gel formulation was successfully developed and evaluated for preventing HIV transmission.

Development and evaluation of orally disintegrating tablets comprising taste-masked mirtazapine granules.

INTRODUCTION: Orally disintegrating tablets (ODTs) provide an important treatment option for pediatric, geriatric and psychiatric patients. In our previous study, we have performed the initial studies for the formulation development and characterization of new ODT formulations containing a bitter taste drug, mirtazapine, coated with 6% (w/w) Eudragit® E-100 (first group of formulations, FGF) without taste evaluation. In present study, coating ratio of the drug was increased to 8% (w/w) (second group of formulations, SGF) to examine the effect of increased coating ratio of drug on in vitro characterization of the formulations including in vitro taste masking study. MATERIALS AND METHODS: Coacervation technique using Eudragit® E-100 was employed to obtain taste-masked mirtazapine granules. FGF and SGF were compared to original product (Remeron SolTab, an antidepressant drug which produced by pellet technology) in terms of in vitro permeability, in vitro taste masking efficiency which was performed by dissolution studies in salivary medium and dissolution stability. Also, the other tablet characteristics (such as diameter, thickness) of SGF were examined. RESULTS AND DISCUSSION: The disintegration time of the SGF were found as A1 < A2 < A3 < A5 < A4 (8% Eudragit® E-100), but all of the formulations dissolved under 30 seconds and friability values were less than 1%. In vitro taste masking efficiency studies demonstrated that C2 formulation (in FGF) had the most similar dissolution profile to Remeron SolTab. CONCLUSIONS: According to these findings, B2 or C2 (with citric acid or sodium bicarbonate, respectively, with 6% Eudragit® E-100) formulations could be promising alternatives to Remeron SolTab.

Formulation studies for mirtazapine orally disintegrating tablets.

OBJECTIVE: Orally disintegrating tablets (ODTs) recently have gained much attention to fulfill the needs for pediatric, geriatric, and psychiatric patients with dysphagia. Aim of this study was to develop new ODT formulations containing mirtazapine, an antidepressant drug molecule having bitter taste, by using simple and inexpensive preparation methods such as coacervation, direct compression and to compare their characteristics with those of reference product (Remereon SolTab). MATERIALS AND METHODS: Coacervation method was chosen for taste masking of mirtazapine. In vitro characterization studies such as diameter and thickness, weight variation, tablet hardness, tablet friability and disintegration time were performed on tablet formulations. Wetting time and in vitro dissolution tests of developed ODTs also studied using 900 mL 0.1 N HCl medium, 900 mL pH 6.8 phosphate buffer or 900 mL pH 4.5 acetate buffer at 37 ± 0.2 °C as dissolution medium. RESULTS: Ratio of Eudragit® E-100 was chosen as 6% (w/w) since the dissolution profile of A1 (6% Eudragit® E-100) was found closer to the reference product than A2 (4% Eudragit® E-100) and A3 (8% Eudragit® E-100). Group D, E and F formulations were presented better results in terms of disintegration time. Dissolution results indicated that Group E and F formulations showed optimum properties in all three dissolution media. DISCUSSION: Formulations D1, D4, D5, E3, E4, F1 and F5 found suitable as ODT formulations due to their favorable disintegration times and dissolution profiles. CONCLUSION: Developed mirtazapine ODTs were found promising in terms of showing the similar characteristics to the original formulation.