What's Trending in Resin-Based Restorations.

Besides meticulous application of proper bonding protocols and clinical technique, the clinical success of direct resin-based restorations is dependent on the selection of the appropriate restorative material, curing light, and, whenever certain contours of the tooth need to be rebuilt, matrix band system. All of these aspects have seen significant developments and improvements over the years, all geared toward increased clinical success and longevity. Highlighting some of these key developments, this article provides an update on resin-based composites, curing lights, and matrix bands.

Influence of universal adhesives and silane coupling primer on bonding performance to CAD-CAM resin-based composites: A laboratory investigation.

OBJECTIVE: Obtaining strong resin bonds to computer-aided design and computer-aided manufacturing (CAD-CAM) resin-based composites with dispersed fillers (CCRBCs) poses a challenge. Therefore, this study aimed to assess the effect of three universal adhesives and a two-component silane coupling agent on the shear bond strength to three (CCRBCs). MATERIALS AND METHODS: Eight hundred and sixty-four specimens of Brilliant Crios, Lava Ultimate, and Tetric CAD were polished or grit blasted, bonded with Adhese Universal DC, One Coat 7 Universal (OC7), and Scotchbond Universal Plus Adhesive (SBU) with or without a silane primer. Shear bond strength was measured after 24 h and 10,000 thermocycles. Linear regressions were performed (α = 0.05). RESULTS: After thermocycling, bond strengths were similar for the universal adhesives on polished Brilliant Crios and Lava Ultimate (p ≥ 0.408). Grit blasted Tetric CAD showed no significant differences (p ≥ 0.096). The silane primer had minimal impact on grit blasted Tetric CAD (p ≥ 0.384). The silane primer increased the bond strength of OC7 to Brilliant Crios (p = 0.001) but decreased the adhesion of SBU to Brilliant Crios and Lava Ultimate (p ≤ 0.018). CONCLUSIONS: Bond strength of universal adhesives varied with CCRBC type. The two-component silane coupling agent showed mixed effects on adhesive performance. CLINICAL SIGNIFICANCE: Selecting universal adhesives from the same CCRBC product line does not always guarantee superior bond strength. The efficacy of silane coupling agents differs based on the bonding substrate.

Impact of Irradiation on the Adhesive Performance of Resin-Based Dental Biomaterials: A Systematic Review of Laboratory Studies.

Head and neck cancers are a significant global health burden, with radiation therapy being a frequently utilized treatment. The aim of this systematic review was to provide a critical appraisal of laboratory studies that assessed the effect of irradiation on the adhesive performance of resin-based biomaterials. The analysis included 23 laboratory studies obtained from five databases, with most studies using human enamel, dentin, or both, and bonding procedures involving the fabrication of direct restorations, standardized specimens, bonding of orthodontic brackets, and luting of endodontic fiber posts. The protocols used for irradiation varied, with most studies exposing specimens made from extracted teeth to irradiation using cabinet irradiators to simulate treatment of head and neck cancer. The findings indicate that irradiation reduces the bond strength of dental adhesives and resin-based composites on flat, ground enamel and dentin specimens, with different adhesives and timing of irradiation having a significant impact on adhesive performance. Irradiation also increased microleakage in most studies. The effect of irradiation on marginal adaptation of direct resin-based composite restorations was inconclusive. This systematic review indicates that irradiation has detrimental effects on the adhesive performance of resin-based biomaterials and highlights the need for further clinical and laboratory studies evaluating the performance of adhesive materials and approaches to improve it.

Deep margin elevation-Present status and future directions.

OBJECTIVE: Deep margin elevation (DME) is a treatment approach to relocate the cervical margin of teeth with subgingival defects to a supragingival position with a direct restoration to facilitate rubber dam isolation, impression taking, and bonding of indirect restorations. This article provides an overview of the current scientific evidence on DME and future directions for research. OVERVIEW: The review included 38 studies on DME, most conducted in vitro. These studies indicate that DME has no detrimental effect on the fracture resistance of restored teeth. Evidence on the impact of DME on marginal quality is conflicting, but most in vitro studies observed no negative effect. Clinical studies, most comprising small patient cohorts, demonstrated favorable restorative outcomes and suggest that DME restorations made with scrupulous care are compatible with periodontal health. Bleeding on probing may occur more frequently at sites with DME, though evidence on this is not unequivocal. CONCLUSIONS: Current evidence, based largely on laboratory studies and limited clinical data, supports DME as a viable approach to restore teeth with localized subgingival defects. However, further clinical studies with long-term follow-ups are required to provide corroborative evidence. CLINICAL SIGNIFICANCE: Current evidence suggests that DME is a viable approach to restore teeth with localized subgingival defects as a possible alternative to surgical crown lengthening. Proper working field isolation, meticulous care in the bonding and buildup procedure, and biofilm removal through patient-performed oral hygiene and professional maintenance care are crucial. As scant clinical trial-based evidence is available today, further research is needed to evaluate the long-term performance of DME restorations and their impact on periodontal health.

Digital Implant Therapy for the Edentulous Patient.

Numerous treatment modalities describing surgical and prosthetic techniques for treating edentulous patients with dental implants have been published during the past 30 years. With the many recent advancements in software, hardware, and biomaterials, the clinical steps for full-arch guided implant placement, immediate provisionalization, and fabrication of the definitive prosthesis have changed significantly. The use of new digital implant components, intraoral scanners, and 3D printing helps clinicians and dental technicians streamline this treatment modality while reducing chairtime and clinical complications. This case report describes the implant therapy for an edentulous patient with a step-by-step clinical workflow.