RESUMEN
Thiacalix[4]arene 2, calix[4]arene 3a and its tetraether fixed in the cone conformation 3b form homo- and heterodimeric capsules in apolar solvents, which are held together by a seam of NH...O=P hydrogen bonds between carbamoylmethyl phosphine oxide functions attached to their wide rim. Their internal volume of approximately 370 A(3) requires the inclusion of a suitable guest. Although neutral molecules such as adamantane (derivatives) or tetraethylammonium cations form kinetically stable complexes ((1)H- and (31)P-time scale), the included solvent is rapidly exchanged. The internal mobility of the included tetraethylammonium cation is distinctly higher (DeltaG=42.5 and 49.7 kJ mol(-1) for 3a and 3b) than that for similar capsules of tetraurea calix[4]arenes 1. Mixtures of 1 with 2, 3a, or 3b contain only the two homodimers but the heterodimerization occurs with the tetraloop tetraurea 6, which cannot form homodimers. Two dimers with cationic guests (2.(C(5)H(5))(2)Co(+).2 and 3a.Et(3)NH(+).H(2)O.3a) were confirmed by single-crystal X-ray analysis.
RESUMEN
Calix[4]arenes substituted by four urea residues at their wide rim form hydrogen-bonded homo- and heterodimeric capsules in apolar solvents. If urea groups are covalently connected to loops or substituted by bulky residues, the dimerization may be restricted to those pairs in which the loops do not overlap and for which the residues are small enough to pass the loops. In the present study, we describe the dimerization properties of tetraureas with one, two (adjacent or opposite), three, or four loops and those bearing (additionally) up to four residues of different size: a = tolyl, b = 3,5-di-tert-butylphenyl, c = 4-propyloxy-3,5-di-(tert-butylphenyl)phenyl, and d = 4-[tris-(4-tert-butylphenyl)methyl]phenyl. For compounds with four loops of different size (-O-(CH2 )n-O-chains with n=10, 14, and 20 connecting the m-positions of the urea phenyl residues) a clear "stepwise" sorting scheme could be established, in which the bulkiest residue d is excluded by all tetraloop compounds and the smallest residue a can pass only the smallest loops (n=10). The medium-sized residues b or c are tolerated by n=14 and 20 or only by n=20. Selectivities can be built up also on geometrical factors. A trisloop compound, for instance, combines only with a tetraurea bearing a single bulky residue and tetraureas with two bulky substituents in adjacent or opposite position are distinguished by the bisloop derivatives with adjacent or opposite loops. The impossibility to form a homodimer of a monoloop compound containing two bulky residues leads to its selective heterodimerization with a derivative bearing three bulky groups. Subtle effects for "borderline" cases, in which the dimerization or reorganization takes a longer time, are also discussed.
RESUMEN
Two cyclic oligoureas with 64- and 80-membered rings in which two sets of three or four rigid xanthene (X) units are connected via flexible diphenyl ether (D) units were synthesized by a stepwise fragment condensation. The compounds were characterized by (1)H NMR and ESI mass spectrometry. The structure of the cyclic octamer (XXXDXXXD) was additionally confirmed by single crystal X-ray analysis. The molecule assumes a strongly folded conformation with distorted C(2)-symmetry, stabilized by intramolecular hydrogen bonds. Surprisingly, intermolecular hydrogen bonds between the macrocycles were not observed. (1)H NMR spectra suggest a C(2) symmetrical conformation of the octamer in solution also, while its kinetically stable complex with three chloride ions has no symmetry element at all.
Asunto(s)
Compuestos Macrocíclicos/química , Éteres Fenílicos/química , Polímeros/química , Xantenos/química , Cristalografía por Rayos X , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Conformación MolecularRESUMEN
Solid-state guest dynamics of tetratolyl tetraurea calix[4]arene tetrapentylether dimeric capsules filled with different types of aromatic guests such as benzene-d6, fluorobenzene-d5 and 1,4-difluorobenzene were studied. Upon inclusion, all guest moieties revealed complexation-induced shifts varying from 2.8 ppm to 5.1 ppm. All guest molecules were shown to undergo distinct motions, ranging from mere C6-rotations of benzene-d6 to (ill-defined) 180 degrees phenyl flips of fluorobenzene-d5. In all cases, dynamic heterogeneities were identified based on 2H lineshape deconvolution. In addition, by combination of both a computed nucleus independent chemical shift (NICS) map and explicit 19F and 2H ab initio DFT chemical shift calculations, the preferred orientation of the guest molecules within the host was derived.
Asunto(s)
Calixarenos/química , Fenoles/química , Teoría Cuántica , Urea/química , Benceno/química , Espectroscopía de Resonancia Magnética , Conformación Molecular , Simulación de Dinámica MolecularRESUMEN
Two series, one of tris-urea macrocycles and another of hexakis-urea macrocycles, are examined by (tandem) Fourier-transform ion cyclotron resonance (FTICR) mass spectrometry with respect to their fragmentation patterns and anion binding properties. All macrocycles are based on two different building blocks, one of which is a very rigid xanthene unit and the other one is a more flexible diphenyl ether. The composition and the sequence of these units thus determine their flexibility. During the fragmentation of deprotonated oligourea macrocycles in the gas phase, one urea N-CO bond is cleaved followed by a scrambling reaction within the macrocycle structure. Consequently, fragments are observed that deviate from those that would be expected from the sequence of the subunits. Interesting anion binding properties involve the simultaneous recognition of two chloride anions by one of the hexakis-urea macrocycles, whose flexibility allows this host to form a double-helical structure. Flexibility also determines which of the hexameric receptors bears a high sulfate affinity. The interaction energy between some of the macrocycles and sulfate is high enough to even stabilize the intrinsically unstable sulfate dianion.
RESUMEN
The synthesis of special tetra-urea calix[4]arene derivatives is described. Two propyl ether groups in 1,3-position and a 5-iodo-isophthalamide bridge connecting two aminopropylether residues in 2,4-position at the narrow rim keep the molecule fixed in the cone conformation. The aryl urea residues are substituted by decyloxy groups in p-position to increase the solubility in apolar solvents, while the iodo substituent allows further functionalization. Two single crystal X-ray structures of 3 and 4 show a strongly pinched cone conformation in which the bridged phenol units are bent outwards, while the phenol units bearing the propyl ether groups are nearly parallel. The molecules are flexible enough, however, to form hydrogen bonded dimeric capsules in apolar solvents. Their (time averaged) D(2) conformation is confirmed by (1)H NMR spectroscopy.
RESUMEN
Size and shape do matter: When dimerized in nonpolar solvents, an equimolar mixture of eleven tetra-urea calix[4]arenes with different wide-rim substituents self-sorts into only six out of 35 different homo- and heterodimers (see picture). Since the calixarene scaffold and the four urea units are the same in all cases, the self-sorting process is driven only by the cooperative action of steric requirements and stoichiometry.
RESUMEN
The physics of nanoscopic systems is strongly governed by thermal fluctuations that produce significant deviations from the behaviour of large ensembles. Stretching experiments of single molecules offer a unique way to study fundamental theories of statistical mechanics, as recently shown for the unzipping of RNA hairpins. Here, we report a molecular design based on oligo calix[4]arene catenanes-calixarene dimers held together by 16 hydrogen bridges-in which loops within the molecules limit how far the calixarene nanocapsules can be separated. This mechanically locked structure tunes the energy landscape of dimers, thus permitting the reversible rupture and rejoining of the individual nanocapsules. Experimental evidence, supported by molecular dynamics simulations, reveals the presence of an intermediate state involving the concerted rupture of the 16 hydrogen bridges. Stochastic modelling using a three-well potential under external load allows reconstruction of the energy landscape.
Asunto(s)
Calixarenos/química , Cristalización/métodos , Modelos Químicos , Modelos Moleculares , Nanoestructuras/química , Nanoestructuras/ultraestructura , Nanotecnología/métodos , Fenoles/química , Simulación por Computador , Dimerización , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Estrés Mecánico , Propiedades de SuperficieRESUMEN
Five macrocylic compounds XXXXXX, XXDXXD, XDXDXD, XDDXDD, and DDDDDD with 48-membered rings, in which six xanthene and/or diphenyl ether fragments are linked through six urea (-NH-C(O)-NH-) groups, have been synthesized. In the cyclization step, a linear diamine was allowed to react with the appropriate diisocyanate by using a [5+1] (i.e., "XDXDX+D" for XDXDXD), [4+2] (DDDDDD), or [3+3] (XDDXDD) procedure. Compounds XXXXXX and XXDXXD were prepared from two molecules of the dimeric amine XX and two molecules of the respective monomeric diisocyanate (X or D) in a [2+1+2+1] (or 2x[2+1]) reaction. The (nonoptimized) yields in the cyclization step ranged from 45 to 80%. The linear precursor diamines or diisocyanates were obtained by analogous condensation reactions by using partial protection with a tert-butoxycarbonyl group. All the macrocyclic compounds and synthetic intermediates were characterized by (1)H NMR and mass spectra. Three different crystal structures were obtained for XDDXDD, which show the molecule in a more or less strongly folded conformation determined by intramolecular hydrogen bonding. The interaction of the hexaureas with selected anions was studied by (1)H NMR spectroscopy and UV absorption spectrophotometry.
RESUMEN
The title compound, C(16)H(14)N(4), features an aromatic ring with two 2,2'-dicyano-propyl residues in positions 1 and 3, which are located above and below the ring plane. The two residues differ in their conformation with respect to the aromatic ring: whereas one of the C(meth-yl)-C-C(methyl-ene)-C(aromatic) torsion angles is gauche [68.93â (12)°], the other one is fully staggered [177.63â (9)°]. The crystal structure is stabilized by C-Hâ¯N hydrogen-bonding inter-actions.
RESUMEN
Macrocyclic molecules containing several amide or urea functions may serve as anion receptors. We describe the synthesis of 32-membered macrocycles, in which four rigid xanthene units (X) and/or diphenyl ether units (D) as flexible analogues are linked via urea groups. All six possible combinations of these units (XXXX, XXXD, XXDD, XDXD, XDDD and DDDD) were synthesized and two examples were characterised by single-crystal X-ray analyses (DDDD and two structures for XXXD). Both macrocycles showed distinct differences in their overall conformation and consequently in their hydrogen-bonding pattern. Hydrogen-bonded solvent molecules are found for both compounds and intramolecular hydrogen bonds for the two structures of XXXD, but surprisingly no direct intermolecular hydrogen bonds between the macrocyclic tetraurea molecules. The interaction with various anions was studied by (1)H NMR spectroscopy. Stability constants for all tetramers were determined by UV spectroscopy for complexes with chloride, bromide, acetate and dihydrogenphosphate in acetonitrile-THF (3:1). The strongest binding was found for XXXD and acetate (log beta = 7.4 +/- 0.2), the weakest for XXXX and acetate (log beta = 5.1 +/- 0.5). MD simulations in chloroform and acetonitrile boxes show that all molecules except DDDD adopt very similar conformations characterized by an up-down-up-down arrangement of the spacer groups. Clustered solvation shells of acetonitrile molecules around XXXX and DDDD suggest their preorganization for spherical/planar and tetrahedral/bidentate anions, respectively, which in turn was corroborated by simulation of the corresponding complexes with chloride and dihydrogenphosphate.
Asunto(s)
Urea/análogos & derivados , Urea/síntesis química , Simulación por Computador , Cristalografía por Rayos X , Ciclización , Enlace de Hidrógeno , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Estructura Molecular , Nitrógeno/química , Urea/químicaRESUMEN
Tetraurea calix[4]arenes 2 have been synthesized in which two adjacent aryl urea residues are connected to a loop by an aliphatic chain -O-(CH(2))(n)-O-. The remaining urea residues have a bulky 3,5-di-tert-butylphenyl residue and an omega-alkenyloxyphenyl residue. Since this bulky residue cannot pass through the loop, only one homodimer (22) is formed in apolar solvents, for steric reasons, in which the two alkenyl residues penetrate the two macrocyclic loops. Covalent connection of these alkenyl groups by olefin metathesis followed by hydrogenation creates compounds 3, which consist of molecules with hitherto unknown topology. Their molecular structure was confirmed by (1)H NMR spectroscopy and ESIMS, and for one example by single-crystal X-ray analysis.
Asunto(s)
Calixarenos/química , Enlace de Hidrógeno , Fenoles/química , Dimerización , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Calix[4]arenes substituted at their wide rim by four aryl urea residues (1) form hydrogen-bonded dimers in apolar solvents. Replacement of one urea residue by an acetamido moiety leads to calix[4]arene derivatives (5) which form hydrogen-bonded tetramers under the same conditions. Both self-assembly processes occur independently. Therefore, molecules have been prepared in which a tetra-urea calix[4]arene and a tri-urea mono acetamide derivative are covalently connected between their narrow rims by a long, mainly aliphatic chain [-O-(CH(2))(n)-C(O)-NH-(CH(2))(m)-O-] (7). In the presence of an equimolar amount of tetra-tosyl urea calix[4]arene () they form dendritic assemblies since the well known heterodimerization of tetra-tosyl and tetra-aryl urea calix[4]arenes prevents the formation of a cross-linked structure. Covalent connection of adjacent urea residues leads to tetra-loop derivatives (3) that cannot form homodimers, but instead form heterodimers with tetra-aryl or tetra-tosylureas. Therefore, similar dendrimers should be available using the selective dimerization observed for 3. The formation of a single, structurally uniform dendrimer from eight building blocks is confirmed by (1)H NMR spectra, showing only peaks that are also found for respective model assemblies. Translational diffusion coefficients of the assemblies have been determined using (1)H DOSY NMR.
Asunto(s)
Dendrímeros/química , Cristalografía por Rayos X , Dimerización , Enlace de Hidrógeno , Espectroscopía de Resonancia MagnéticaRESUMEN
Ten tetra-urea calix[4]arene derivatives with different ether residues (methyl, pentyl, benzyl, all combinations of methyl and pentyl, 1,3-dibenzyl-2,4-dipentyl), including also the tetrahydroxy compound and the 1,3-dipentyl ether, were synthesised. Their urea groups were substituted with a lipophilic residue to ensure sufficient solubility in cyclohexane. Thus, kinetics for the exchange of the included guest (benzene) against the solvent (cyclohexane) could be followed by 1H NMR spectroscopy. The apparent first order rate constants decrease with increasing size of the ether residues from methyl to benzyl by more than three orders of magnitude. This can be understood by a decreasing flexibility/mobility of the calixarene skeleton. In line with this explanation is the rather slow exchange for the tetrahydroxy compound, where the cone conformation is stabilised by a cyclic array of intramolecular OH...OH hydrogen bonds.
Asunto(s)
Calixarenos/química , Calixarenos/síntesis química , Fenoles/química , Fenoles/síntesis química , Urea/química , Benceno/química , Ciclohexanos/química , Dimerización , Éteres/química , Enlace de Hidrógeno , Cinética , Espectroscopía de Resonancia Magnética , Estructura MolecularRESUMEN
The synthesis of 24-membered macrocycles is described, in which rigid xanthene units (X) and/or diphenyl ether units (D) as flexible analogues are linked via urea groups. All four possible combinations (XXX, XXD, XDD, DDD) have been obtained with yields of 40-72% for the cyclisation step. In two cases, the respective cyclic hexamers (XXDXXD, XXXXXX) were also isolated. Two compounds have been characterised by a single crystal X-ray analysis of the free triurea (XXD, XDD) and one example (DDD) by its complex with tetrabutylammonium chloride. It shows the chloride anion in the centre of the macrocycle, held by six NH...Cl- hydrogen bonds. The interaction with various other anions has been studied by 1H NMR. Complexation constants for chloride, bromide and acetate have been measured for all trimers by UV spectrophotometry. Molecular dynamics simulations have been carried out to determine the conformation of the free receptors in chloroform and acetonitrile. They show that in chloroform, intramolecular hydrogen bonding occasionally facilitated by trans-->cis isomerisation of an amide bond dominates the conformation of the macrocycles while in acetonitrile (the solvent used for complexation measurements), the ligating urea NH protons are properly arranged for the complexation of anions, however, their strong solvation is counteractive to the complexation.
Asunto(s)
Compuestos Macrocíclicos/química , Compuestos Macrocíclicos/síntesis química , Urea/química , Urea/síntesis química , Acetonitrilos/química , Cloroformo/química , Cristalización , Cristalografía por Rayos X , Ciclización , Enlace de Hidrógeno , Modelos Moleculares , Estructura Molecular , Compuestos de Amonio Cuaternario/química , Espectrofotometría Ultravioleta , Urea/análogos & derivados , Xantenos/químicaRESUMEN
Tetra-urea calix[4]arenes substituted with four mono- or bisalkenyl residues have been converted into bis- or tetraloop compounds by intramolecular olefin metathesis, with use of a tetratosylurea calix[4]arene as template. The same strategy has now been used to synthesise trisloop compounds and bisloop compounds with adjacent loops, completing the series of the loop-containing tetra-urea derivatives. A tetra-urea calix[4]arene of the AABB type, where A stands for a bisalkenyl- and B for a monoalkenyl-substituted urea unit, was used as precursor for the three loops. It was easily synthesised from a tetraamino calix[4]arene in which two adjacent amino groups were Boc-protected. The ABCB-type precursor for the two adjacent loops was prepared through protection of two opposite amino functions with trityl groups. The capabilities of the novel macrocyclic tetra-ureas for the selective formation of hydrogen-bonded dimers were studied.
Asunto(s)
Calixarenos/síntesis química , Fenoles/síntesis química , Urea/química , Calixarenos/química , Dimerización , Espectroscopía de Resonancia Magnética , Fenoles/química , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Calix[4]arenes substituted by four urea functions are self-complementary molecules that spontaneously combine in apolar solvents in the presence of an ammonium salt to form dimeric capsules held together by a belt of hydrogen bonds. In the presence of tetraethylammonium salts, the Et4N+ cation is included as a guest. The sorting between dimeric capsules formed in a mixture of calix[4]arenes directly depends on the steric crowding of the substituents grafted on the urea groups whether aromatic derivatives or aliphatic chains linking urea functions in mono-, di-, or tetraloop structures. Simple rules allow one to anticipate which capsules will be exclusively formed when calix[4]arenes are mixed in different proportions. The stabilization of the dimeric structures by hydrogen bonds is thwarted by the overlaps of aliphatic loops and/or by bulky groups that cannot pass through these loops. Despite the structural similarity of the calixarenes, the exclusive formation of dimers of well-defined compositions and clear titration breaks are observed by electrospray mass spectrometry. This technique yields reliable information on stoichiometries and composition despite measurements in the gas phase rather than in solution and it does not suffer from excessive peak overlaps in contrast with NMR.
Asunto(s)
Calixarenos/química , Fenoles/química , Urea/química , Dimerización , Espectroscopía de Resonancia Magnética/métodos , Modelos Moleculares , Estructura Molecular , Estereoisomerismo , Urea/análogos & derivadosRESUMEN
The selective heterodimerization of tetra-tolyl () and tetra-tosylurea () calixarenes, serendipitously found by Rebek et al. (R. K. Castellano, B. H. Kim and J. Rebek, Jr., J. Am. Chem. Soc., 1997, 119, 12671-12672), has been used for the construction of highly sophisticated macrocycles and well-defined supramolecular assemblies. Regrettably, hitherto, neither the exact structure of these heterodimers nor the reason for their exclusive formation is known. We present molecular dynamics simulations using the AMBER force field in explicit chloroform solvent for the two homodimers, the heterodimer and the two uncomplexed tetra-urea calixarenes. The rigid rotation about the C-S-N-C bond of the tosylurea group has been calculated for a model compound (N-mesylformamide) at the RHF/6-31G* level of theory. The calculations suggest that the heterodimer . is energetically favored over the homodimers by a sterically relaxed conformation of the tosylurea hemisphere in ., by a moderate degree of reorganization of the hemispheres from the uncomplexed to the complexed state and by favorable interactions between the hemispheres. The tosylurea S=O groups are involved in the hydrogen bonding system which results in different sizes of the three capsules in increasing order . < . < .. To prove the computational predictions, 1H NMR experiments have been carried out with solvents/guests differing in shape and size. The largest capsule . prefers the larger guests toluene and p-xylene while the latter is not encapsulated in the smallest capsule ..
Asunto(s)
Calixarenos/química , Compuestos de Tosilo/química , Urea/química , Cápsulas , Dimerización , Enlace de Hidrógeno , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Estructura Molecular , SolucionesRESUMEN
The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.
Asunto(s)
Calixarenos/química , Catenanos/química , Calixarenos/síntesis química , Cristalografía por Rayos X , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Estructura Molecular , EstereoisomerismoRESUMEN
[structure: see text]. Whereas tetra-urea derivatives of tetra-alkoxy calix[4]arenes 1 exist as single molecules in THF, dimeric hydrogen-bonded capsules are exclusively found for the corresponding calix[4]arene derivatives 3 and 2 with two or four free hydroxyl groups. Comparison with the rigidified tetra-urea 5 suggests that this increased stability of the dimers is due to the stabilization of their four-fold symmetry by intramolecular hydrogen bonds between the phenolic hydroxyl groups.