RESUMEN
We propose a reliable method for stabilizing narrow linewidth Brillouin fiber lasers with non-resonant pumping. Mode-hopping is suppressed by means of a phase-locked loop that locks the pump-Stokes detuning to a local radio-frequency (RF) oscillator. Stable single-mode operation of a 110-m-long Brillouin fiber laser oscillating at 1.55 µm is demonstrated for several hours. The beat note between two independent Stokes waves presents a phase noise level of -60 dBc/Hz at 100 Hz with a -20 dB/decade slope, and a FWHM linewidth lower than 50 Hz.
RESUMEN
Thanks to an all solid core photonic crystal fiber (PCF) used as a multicore fiber, we propose and experimentally demonstrate what is to our knowledge a new optical detection scheme for the spontaneous emission collection of cold atoms. A Magneto-Optical Trap (MOT) is placed in front of a polished PCF end-face. As they display a higher optical index than the surrounding cladding silica, the 108 rods (equivalent to a 108 pixels camera) of this PCF are light guiding and behave like an array of detectors. Both global and local properties of the trapped atoms are probed. A MOT lifetime is reported. We also take advantage of the multi-core geometry for a real time detection of the center-of-mass motion of the atomic cloud.
RESUMEN
Thanks to a double-frequency phase modulation scheme, we report a vector Brillouin optical time-domain analyzer (BOTDA). This BOTDA has a high immunity level to noise, and it features a phase spectrogram capability. It is well suited for complex situations involving several acoustic resonances, such as high-order longitudinal modes. It has notably been used to characterize a dispersion-shifted fiber, allowing us to report spectrograms with multiple acoustic resonances. A very high 57 dB dynamic range is also reported for 100-ns-long pulses simultaneously with a 16 cm numerical resolution.
RESUMEN
We report what we believe to be a novel experimental heterodyne technique for the spectral analysis of continuous optical wave sources. The achieved resolution is as low as the kilohertz level, with a dynamic range in excess of 90 dB. The technique is based on a heterodyne detection between the source under test (SUT) and a Brillouin fiber laser generated by this SUT. Contrary to standard self-heterodyne techniques only a few tens of meters of optical fiber is required without the need of any optical modulators. This spectrometer has been used to characterize a distributed-feedback laser diode and a Brillouin fiber laser.