Fractal analysis of the effects on mandibular bone of botulinum toxin therapy of the masseter muscle in patients with bruxism.

OBJECTIVE: We examined changes in the mandibular angle, ramus, and condylar neck of patients with bruxism after botulinum toxin-A (BTX-A) injection into the masseter muscle as calculated with fractal analysis (FA) on panoramic radiographs (PRs). METHODS: We examined the PRs of 3 groups of 22 patients each (n = 66) obtained upon presentation and 6 months later. One group included healthy controls without bruxism, one group included patients with untreated bruxism, and one group included patients with bruxism who had undergone BTX-A injection into the masseter muscle. We performed FA of the bilateral angle, ramus, and condylar neck of the PRs to calculate fractal dimension (FD). RESULTS: The FD values of the angle on the second PRs of the untreated bruxism group were significantly higher than those of the other groups (P = .026), specifically when compared to the BTX-A injection group (P = .017). The FD values in the angle and ramus of the bruxism group were significantly higher on the second PRs (P ≤..005)) Conversely, the FD values in the angle of the BTX-A injection group were significantly lower on the second PR (P = .039). CONCLUSIONS: Masseter muscle hyperactivity due to bruxism increases bone density in masseter muscle attachment regions. BTX-A injection restricts muscle activity, thereby chnging bone structure and decreasing FD.

Adjunctive Systemic Azithromycin with Nonsurgical Periodontal Treatment: Effects on Clinical Parameters in Smokers with Periodontitis.

Objectives: Smokers with periodontitis are therapeutically challenging. Azithromycin (AZM) may be used as an adjunct to periodontal treatment. The aim of this randomized, double-blind, controlled clinical study was to determine the effect of azithromycin in shallow, moderate, and deep pocket depths in smokers when combined with non-surgical periodontal treatment. Material and methods: Forty-nine patients who smoked at least 20 cigarettes per day for more than 5 years were included in the study; however only 40 completed it. The number of teeth, plaque index (PI), gingival index (GI), PPD, CAL, bleeding on probing (BOP) and gingival recession were recorded at baseline and months 1, 3 and 6. The pocket depths (PD) were grouped as shallow, moderate, and deep. Twenty-four patients assigned to the AZM+ (test) group received AZM (500 mg tablets) once a day for 3 days, beginning on the first day of SRP. Results: The decline in the total number of pockets in all groups was statistically significant from baseline to 1st, baseline to 3rd, baseline to 6th; and from 1st to 3rd and 1st to 6th months. There was a statistically significant increase in the number of shallow pockets between baseline and 3rd, baseline and 6th; and 1st and 6th months (p=0.000) for both groups. Conclusion: Antibiotic administration significantly increased the number of shallow pockets at all time points. However, larger scale controlled clinical studies are needed to verify the efficiency of AZM in smoker periodontitis patients.

Micro-CT evaluation of the effect of various ScRp instrumentation methods on cement loss, porosity and micro-crack formation.

OBJECTIVES: The purpose of this study was to compare the effectiveness of three different instruments on cement loss, porosity and micro-crack formation, which was not evaluated before, following scaling and root planning (SRP) using micro-computed tomography (micro-CT). METHODS: In this experimental study, 30 single-rooted extracted human teeth were used and divided into three groups. All the teeth were scanned with micro-CT before and after SRP. Group 1: SRP was performed with Gracey curettes, Group 2: SRP was performed by using an ultrasonic device, and Group 3: SRP was performed by using diamond burs. Cement loss from the root surface, porosity, and micro-crack formation in the root dentine were analysed. Micro-CT is used for qualitative and quantitative analysis of samples. The obtained data were analysed statistically (p < 0.05). RESULTS: Minimum cement loss following SRP was detected with ultrasonic scaler (26.98 mm3 ), whereas the highest was created by diamond burs (96.20 mm3 ) (p < 0.05). The total porosity values after SRP were 0.278%, 0.334% and 0.252% for Groups 1, 2 and 3, respectively. Although Group 3 had the least porosity values, there was no statistically significant difference between the groups. The highest micro-crack formation was seen in Group 2 and the lowest was in Group 1 with a significant difference (p < 0.05). CONCLUSIONS: More cement loss was observed with diamond burs. Ultrasonic devices appear to be a viable alternative to instrumentation with curettes. However, ultrasonic devices should be used carefully because of micro-crack formation since the micro-crack resulting from instrumentation with hand instruments is the least of all.

The Evaluation of the Relationship between Changes in Masseter Muscle Thickness and Tooth Clenching Habits of Bruxism Patients Treated with Botulinum Toxin A.

Background: Bruxism is defined as recurrent masticatory muscle activity. Although there is not an agreed treatment method for bruxism, the application of botulinum toxin A (BT-A) has become a reliable lately. This study aimed to evaluate the correlation between the changes in masseter muscle thickness and clenching habits in bruxism patients treated with BT-A. Methods: Twenty-five patients, 23 females and 2 males, diagnosed with possible sleep bruxism were included in the study. The Fonseca Anamnestic Index was applied to the patients to determine their clenching habits and depression levels both before the treatment, and 6 months after it. The masseter muscle thickness was measured using ultrasonography before the treatment and 3 months and 6 months after the treatment. All the patients were injected with a total of 50 U of BT-A, 25 U to each masseter. Results: A statistically significant decrease in masseter muscle thickness was observed in the ultrasonography 3 and 6 months after the BT-A treatment. There was a statistically significant decrease in the Fonseca scores, in which the teeth clenching habits of the patients were evaluated 6 months after the treatment. Although there was a decrease in the depression levels of the patients 6 months after the treatment, this difference was not statistically significant. Conclusion: When the results of this study were evaluated, it was seen that the BT-A injections are an effective, safe, and side effect-free method in the treatment of bruxism and masseter hypertrophy.

Development and validation of intraoral periapical radiography-based machine learning model for periodontal defect diagnosis.

Radiographic determination of the bone level is useful in the diagnosis and determination of the severity of the periodontal disease. Various two- and three-dimensional imaging modalities offer choices for imaging pathologic processes that affect the periodontium. In recent years, innovative computer techniques, especially artificial intelligence (AI), have begun to be used in many areas of dentistry and are helping increase treatment and diagnostic performance. This study was aimed at developing a machine-learning (ML) model and assessing the extent to which it was capable of classifying periodontal defects on 2D periapical images. Eighty-seven periapical images were examined as part of this research. The existence or absence of periodontal defects in the aforementioned images were evaluated by a human observer. The evaluations were subsequently repeated using a radiomics platform. A comparison was made of all data acquired through human observation and ML techniques by SVM analysis. According to the study findings the ability of human observers and the ML model to detect periodontal defects was significantly different in comparison to the gold standard. However, ML and human observers performed similarly for the detection of periodontal defects without a significant difference. This study reveals that the prediction of periodontal defects can be achieved by combining particular radiomic features with image variables. The proposed machine leaning model can be utilized for supporting clinical practitioners and eventually substitute evaluations conducted by human observers while enhancing future levels of performance.

Clindamycin phosphate and bone morphogenetic protein-7 loaded combined nanoparticle-graft and nanoparticle-film formulations for alveolar bone regeneration - An in vitro and in vivo evaluation.

Commonly utilized techniques for healing alveolar bone destruction such as the use of growth factors, suffering from short half-life, application difficulties, and the ability to achieve bioactivity only in the presence of high doses of growth factor. The sustained release of growth factors through a scaffold-based delivery system offers a promising and innovative tool in dentistry. Furthermore, it is suggested to guide the host response by using antimicrobials together with growth factors to prevent recovery and achieve ideal regeneration. Herein, the aim was to prepare and an in vitro - in vivo evaluation of bone morphogenetic protein 7 (BMP-7) and clindamycin phosphate (CDP) loaded polymeric nanoparticles, and their loading into the alginate-chitosan polyelectrolyte complex film or alloplastic graft to accelerate hard tissue regeneration. PLGA nanoparticles containing CDP and BMP-7, separately or together, were prepared using the double emulsion solvent evaporation technique. Through in vitro assays, it was revealed that spherical particles were homogeneously distributed in the combination formulations, and sustained release could be achieved for >12 weeks with all formulations. Also, results from the micro-CT and histopathological analyses indicated that CDP and BMP-7 loaded nanoparticle-film formulations were more effective in treatment than the nanoparticle loaded grafts.

Evaluation of a metal artifact reduction algorithm and an adaptive image noise optimization filter in the estimation of peri-implant fenestration defects using cone beam computed tomography: an in-vitro study.

OBJECTIVE: The aim of this study is to assess the effects of metal artifact reduction (MAR) and adaptive image noise enhancer (AINO) in CBCT imaging on the detection accuracy of artificially created fenestration defects in proximity to titanium and zirconium implants in sheep jaw. METHODS: Six zirconium and 10 titanium implants were planted on mandibular jaws of three sheep, and artificial defects were created. All images were obtained with a standard voxel size (0.150 mm3) and with 4 scan modes: (1) without MAR/without AINO; (2) with MAR/without AINO; (3) without MAR/with AINO; and (4) with MAR/with AINO during CBCT scanning. A total of 60 CBCT scans were produced. RESULTS: For all types of implants, intra- and inter-observer kappa values were the highest for MAR filter. The scan mode of with MAR filter was found to have the highest area under the curve (AUC), whereas the scan mode of without both MAR and AINO filters was found to have the lowest AUC values with statistical significance (p ≤ 0.05). Titanium implants were found to have higher AUC values than zirconium (p ≤ 0.05). CONCLUSION: Both MAR module and AINO filters enhance the accuracy of the detection of peri-implant fenestrations; however, the use of MAR filter solely can be recommended for detection of peri-implant fenestrations.

Cone Beam CT Evaluation of Maxillary Sinus Floor and Alveolar Crest Anatomy for the Safe Placement of Implants.

BACKGROUND: Alveolar bone height in the posterior maxillary region is very important and critical for dental implant planning and placement. OBJECTIVES: This study aimed to evaluate the anatomy of the maxillary sinus floor in relation to the alveolar crest and to determine variations in the vertical measurements between the maxillary sinus floor and the alveolar bone crest tip in the posterior edentulous maxilla with the use of cone beam computerized tomography. METHODS: This analysis enrolled 234 retrospectively selected patients (123 males with mean age 52.95±11.74 (range 32-76 years) and 111 females with mean age 58.14±11.92 (range 32-75 years)) with edentulous posterior maxillary regions. The maxillary sinus floor was divided into three anatomical segments (anterior, median and posterior) in relation to the transverse palatine suture. The measurements were performed on 3D surface rendered volumetric images by using rotation and translation of the views. Landmarks for measurement were specified by using a cursor driven pointer. Vertical lines were marked on the cross-sectional images between the alveolar ridge and the deepest point of the maxillary sinus floor for each of the three regions. P < 0.05 was regarded as statistically significant. RESULTS: The mean distance values between the sinus floor and the alveolar crest in the anterior, median and posterior regions were 8.74±3.97 mm, 5.37±3.23 mm and 7.06±3.28 mm, respectively. Measurements in the anterior region were found to be high in both total and gender groups compared to other regions. Also, subsinus alveolar bone heights decreased with increasing age in both genders in all three regions. CONCLUSION: This study emphasizes that the mean subsinus alveolar bone height is highest in the anterior segment of the edentulous posterior maxilla. These results may guide clinicians to make the decision of implant placement area and lead to less invasive alternative surgery methods for edentulous posterior segments.

Comparison of the different voxel sizes in the estimation of peri-implant fenestration defects using cone beam computed tomography: an ex vivo study.

BACKGROUND: To examine the influence of voxel sizes to detect of peri-implant fenestration defects on cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This study performed with three sheep heads both maxilla and mandible and two types of dental implant type 1 zirconium implant (Zr40) (n = 6) and type 2 titanium implant (Ti22) (n = 10). A total of 14 peri-implant fenestrations (8 buccal surfaces, 6 palatal/lingual surface) were created while 18 surfaces (8 buccal, 10 palatal/lingual) were free of fenestrations. Three observers have evaluated the images of fenestration at each site. Images obtained with 0.75 mm3, 0.100 mm3, 0.150 mm3, 0.200 mm3, and 0.400 mm3 voxel sizes. For intra- and inter-observer agreements for each voxel size, Kappa coefficients were calculated. RESULTS: Intra- and inter-observer kappa values were the highest for 0.150 mm3, and the lowest in 0.75 mm3 and 0.400 mm3 voxel sizes for all types of implants. The highest area under the curve (AUC) values were found higher for the scan mode of 0.150 mm3, whereas lower AUC values were found for the voxel size for 0.400 mm3. Titanium implants had higher AUC values than zirconium with the statistical significance for all voxel sizes (p ≤ 0.05). CONCLUSION: A voxel size of 0.150 mm3 can be used to detect peri-implant fenestration bone defects. CBCT is the most reliable diagnostic tool for peri-implant fenestration bone defects.

Comparison of the burr and chemically induced periodontal defects using different field-of-view sizes and voxel resolutions.

OBJECTIVE: This study assessed the use of different voxel resolutions in a cone beam computed tomography (CBCT) unit for the detection of artificially induced periodontal bone defects created using burr, burr and chemicals, and only chemicals. STUDY DESIGN: Seven dry skulls were used in this study. In total, 65 dehiscence defects, 43 fenestration defects, and 76 control sites with no periodontal defects were examined. Images were obtained from a CBCT unit (3 D Accuitomo; J Morita Mfg. Corp., Kyoto, Japan), using 3 field-of-view (FOV) sizes (4 × 4 cm; 6 × 6 cm; and 8 × 8 cm) and 4 scan modes (standard, high-definition, high-fidelity, and low-dose). RESULTS: Overall, κ coefficients for interobserver agreement on burr-induced periodontal defects ranged from 0.336 to 0.795, with the lowest κ value (indicating a fair degree of agreement) obtained for images acquired in standard mode with a voxel size of 0.160 mm3. κ coefficients for the detection of periodontal defects were highest (indicating moderate to high degrees of interobserver agreement) for smaller voxel sizes and high-resolution images. Statistical comparison among groups (burr, burr + chemicals, and chemicals only) was performed using 1-way analysis of variance with post hoc tests. CONCLUSIONS: The CBCT scan mode may affect the diagnosis of periodontal defects. The technique used to create periodontal defects also affected diagnosis. For this kind of experiment, burr-induced or burr + chemical-induced defects should be used, rather than those induced solely using a chemical technique.

Burnout and occupational participation among dentists with teaching responsibilities in universities.

The aim of this study was to investigate the levels of burnout and explore the relationships between burnout and occupational participation among dentists with teaching responsibilities. Canadian Occupational Performance Measure (COPM) was used to evaluate occupational participation with questions on demographic information among 155 dentists with teaching responsibilities. Age, gender, years of experience, academic position were the factors affecting level of burnout and occupational participation. Occupational performance score was negatively correlated with emotional exhausment (r = -.731) and depersonalization (r = -.693) while positively correlated with personal accomplishment (r = .611). Occupational satisfaction scores were negatively correlated with emotional exhausment (r = -.631) and depersonalization (r = -.625) while positively correlated with personal accomplishment (r = .614). Occupational participation level can effect burnout among dentists with teaching responsibilities. Further studies with a larger sample are needed to investigate these preliminary results deeply.

Impact of non-surgical periodontal therapy on saliva and serum levels of markers of oxidative stress.

OBJECTIVE: The purpose of this study was to determine the effect of non-surgical periodontal treatment on markers of oxidative stress in saliva and serum in patients with chronic periodontitis. MATERIALS AND METHODS: In total, 25 patients, who were diagnosed with generalized chronic periodontitis (11 females and 14 males), and 26 systemically and periodontally healthy individuals (15 females and 11 males) were included. The plaque index (PI), gingival index (GI), probing pocket depth (PPD), attachment loss (AL), gingival recession (GR), and bleeding on probing (BOP) were recorded at baseline and 6 weeks later. Malondialdehyde (MDA), 8-hydroxydeoxyguanosine (8-OHdG), and 4-hydroxy-2-nonenal (4-HNE) were assessed in saliva and serum samples before and after the non-surgical treatment by enzyme-linked immune sorbent assay (ELISA). RESULTS: In the group with chronic periodontitis, all clinical parameters were significantly higher compared to the control group at baseline (p < 0.001). Periodontal treatment reduced plaque, gingival inflammation, and pocket depth significantly (p < 0.001). At baseline, salivary 8-OHdG was significantly higher in chronic periodontitis (p < 0.001) and reduced significantly subsequent to the periodontal treatment (p < 0.001). Salivary MDA and serum 4-HNE were significantly higher in the patients with periodontitis compared to the control group (p < 0.001). Periodontal treatment did not significantly change the levels of 4-HNE and salivary MDA (p = 0.503, p = 0.093). CONCLUSIONS: Salivary 8-OHdG and MDA may be associated with local impact of periodontal disease, while 4-HNE may be associated with systemic impact of chronic periodontitis. CLINICAL RELEVANCE: Clinical intervention in periodontitis may be beneficial for periodontitis patients' systemic oxidative stress control, and using lipidic agents for the use of anti-inflammatory/pro-resolving processes for blocking the actions of arachidonic acid cascade can enable some late therapeutic strategies in order to lead oxidative stress-induced inflammation.

A combined peri-implant plastic surgery approach for implants in the esthetic zone using a novel technique: A series of 10 cases.

OBJECTIVE: In this study, 12-month follow-up clinical results of a combined peri-implant plastic surgery approach for hard and soft tissue augmentation in implant rehabilitation in the esthetic zone are presented. METHOD AND MATERIALS: Ten individuals who required extraction due to severe periodontal destruction in the maxillary and mandibular area were included in the study. Implant surgery was performed in the same session as the combined peri-implant plastic surgeries, which involved guided bone regeneration and free periosteal grafts. Prosthetic treatment was administered in the sixth month following the surgeries. RESULTS: Hard and soft tissue augmentation with sufficient keratinized mucosa width (≥ 2 mm) was achieved with the combined surgical approaches. Pleasing esthetic results were obtained by careful positioning of the implants. CONCLUSIONS: In implant rehabilitation, in cases where there are insufficient hard and soft tissues in the esthetic zone, a combined peri-implant plastic surgery approach not only enables the ideal implant position where both function and esthetics are ensured but also provides effective protection of peri-implant tissue health.

BURNOUT AND OCCUPATIONAL PARTICIPATION AMONG TURKISH DENTAL STUDENTS.

The aim of the present study was to investigate the prevalence of burnout and occupational participation limitation among dental students in a dental school in Turkey. Four hundred fifty-eight dental students (females=153; males=305) were included in the study. The age range varied from 17-to-38 years. Maslach Burnout Inventory-Student Version (MBI-SV) and Canadian Occupational Performance Measure (COPM) were used to gather data. Descriptive analyses, t-test, and Kruskall-Wallis test for independent groups were used for data analyses. The results indicated that 26% of all the students have burnout in terms of emotional exhaustion (25%), cynicism (18%), and academic efficacy (14%). The results showed that burnout is statistically significant in relation to demographics (p<0.05). Twenty-four percent of the students showed considerably decreased occupational performance and satisfaction scores, which suggested occupational participation limitations. Occupational performance and satisfaction scores were inversely correlated with emotional exhaustion and cynicism, while directly correlated with reduced academic efficacy (p<0.05). The results of the present study indicates that burnout and occupational participation limitation can be seen among dental students. Students with burnout may also have occupational participation limitation. Enriching dental education programs with different psychological strategies may be useful for education of healthy dentists and improve the quality of oral and dental health services.

Association between burnout and depressive symptoms among Turkish dentists.

BACKGROUND/PURPOSE: Health care professionals including dentists can experience increased professional burnout. The aim of the study was to evaluate the association between depressive symptoms and burnout among Turkish dentists. MATERIALS AND METHODS: This study was conducted among a Turkish dentist sample in Ankara (Turkey) between February 2015 and August 2015. From a total of 500 dentists, 337 were included. A self-structured questionnaire, Maslach Burnout Inventory (MBI), and Beck Depression Inventory (BDI) were completed by the participants. The Student t test or analysis of variance was used to compare the variables. RESULTS: A total of 337 dentists (162 female dentists; mean age of participants 36 ± 4.45 years) participated in this study. Age, sex, professional status, years in profession, sector, and number of patients seen/d were factors affecting level of burnout (P < 0.05); 29% of the participants showed burnout and 22.2% showed depressive symptoms. Participants showed increase in emotional exhaustion (38%), increase in depersonalization (22%), and decrease in personal accomplishment (12%). The mean score of BDI significantly correlated with those of the MBI subscales (P < 0.05). All items of BDI except weight loss, irritability, and loss of appetite significantly correlated with MBI subscores (P < 0.05). CONCLUSION: Dentists may face burnout and depressive symptoms during their professional life. Increased burnout level can give an idea on depressive symptoms, and may provide an opportunity to identify depression earlier. Creating and raising awareness about burnout are important to avoid and prevent depression among dentists. Further longitudinal studies analyzing the effects of interdisciplinary client-centered self-management programs for dentists on depressive symptoms and burnout must be planned.

Comparison of intraoral radiography and cone-beam computed tomography for the detection of periodontal defects: an in vitro study.

BACKGROUND: This study aimed to compare the diagnostic accuracy of cone-beam computed tomography (CBCT) unit with digital intraoral radiography technique for detecting periodontal defects. METHODS: The study material comprised 12 dry skulls with maxilla and mandible. Artificial defects (dehiscence, tunnel, and fenestration) were created on anterior, premolar and molar teeth separately using burs. In total 14 dehiscences, 13 fenestrations, eight tunnel and 16 without periodontal defect were used in the study. These were randomly created on dry skulls. Each teeth with and without defects were images at various vertical angles using each of the following modalities: a Planmeca Promax Cone Beam CT and a Digora photostimulable phosphor plates. Specificity and sensitivity for assessing periodontal defects by each radiographic technique were calculated. Chi-square statistics were used to evaluate differences between modalities. Kappa statistics assessed the agreement between observers. Results were considered significant at P < 0.05. RESULTS: The kappa values for inter-observer agreement between observers ranged between 0.78 and 0.96 for the CBCT, and 0.43 and 0.72 of intraoral images. The Kappa values for detecting defects on anterior teeth was the least, following premolar and molar teeth both CBCT and intraoral imaging. CONCLUSIONS: CBCT has the highest sensitivity and diagnostic accuracy for detecting various periodontal defects among the radiographic modalities examined.

Survival rate of short, locking taper implants with a plateau design: a 5-year retrospective study.

BACKGROUND: Short implants have become popular in the reconstruction of jaws, especially in cases with limited bone height. Shorter implants, those with locking tapers and plateau root shapes, tend to have longer survival times. We retrospectively investigated the cumulative survival rates of Bicon short implants (<8 mm) according to patient variables over a 5-year period. MATERIALS AND METHODS: This study included 111 consecutively treated patients with 371 implants supporting fixed or removable prosthetics. Data were evaluated to acquire cumulative survival rates according to gender, age, tobacco use, surgical procedure, bone quality, and restoration type. Statistics were performed using chi-square, Mann-Whitney, and Kruskal Wallis H tests. RESULTS: The survival rate was 97.3% with, on average, 22.8 months of follow-up. Patients older than 60 years had higher failure rate than the other age groups (P < 0.05). Placed region, age, and bone quality had adverse effects on survival rate in the <8 mm implant group with statistically significant difference (P < 0.05). CONCLUSIONS: Approximately 23-month follow-up data indicate that short implants with locking tapers and plateau-type roots have comparable survival rates as other types of dental implants. However, due to limitations of study, these issues remain to be further investigated in future randomized controlled clinical trials.

Combined soft and hard tissue peri-implant plastic surgery techniques to enhance implant rehabilitation: a case report.

This case report presents an implant-aided prosthetic treatment in which peri-implant plastic surgery techniques were applied in combination to satisfactorily attain functional aesthetic expectations. Peri-implant plastic surgery enables the successful reconstruction and restoration of the balance between soft and hard tissues and allows the option of implant-aided fixed prosthetic rehabilitation.

Discoloration of provisional restorations after oral rinses.

PURPOSE: Oral rinses are widely used to promote periodontal health with provisional restorations during the interim period. The aim of this study was to compare the discoloration of provisional restoration materials with different oral rinses. MATERIAL AND METHODS: A total of 140 disc-shaped specimens (shade A2) (10 mm x 2 mm) were prepared from one PMMA-based (TemDent Classic(®)) and three different bis-acrylic-based (Protemp II(®), Luxatemp(®) and Fill-In(®)) provisional restoration materials (n=7). The color values (L*, a*, and b*) of each specimen were measured before and after exposure with a colorimeter, and the color changes (∆E) were calculated according to the CIE L*a*b* system. The specimens were immersed in each of the 4 oral rinses (alcohol-containing mouthwash, chlorhexidine, benzydamine HCl, benzydamine HCl and chlorhexidine) twice a day for 2 minutes. After 2 minutes of immersion in the oral rinses, the specimens were immersed in artificial saliva. The specimens were exposed to the oral rinses and the artificial saliva for 3 weeks. Two-way ANOVA, the Bonferroni test and the paired sample t-test were used for statistical analyses (p<0.05). RESULTS: Comparison of the discoloration from the oral rinses after immersion for three weeks revealed no significant differences (p>0.05). The lowest color change was observed in PMMA-based Temdent in all oral rinses (p<0.05). There were no significant differences between the bis-acryl composites after immersion in saliva or the mixture of benzydamine HCl and chlorhexidine and the alcohol-containing mouthwash for 3 weeks (p>0.05). After immersion in chlorhexidine, the color change values of Protemp II and Fill-in showed significant differences (p=0.018). Protemp II also showed less discoloration than the other bis-acryl composites, and this color change was statistically significant (p <0.05). For all oral rinses, the L* value decreased while b* values increased, and this color change was found to be statistically significant (p <0.05). A* values were found to be significantly higher with oral rinses (p<0.05), except Protemp II immersed in benzydamine HCl or alcohol-containing mouthwash. CONCLUSIONS: The type of the oral rinse did not affect the discoloration process. For long-term esthetic results, choosing MMA-based materials for provisional restorations appears to be more effective.