RESUMEN
[This corrects the article DOI: 10.1039/D4RA01086H.].
RESUMEN
The comprehensive research of magnetic and electronic structure properties of the new class of Gd0.4Tb0.6(Co1-xNix)2 compounds, crystallizing in the cubic Laves phase (C15), is reported. The magnetic study was completed with electrical resistivity and electronic structure investigations. The analysis of Arrott plots supplemented by a study of temperature dependency of Landau coefficients revealed that all compounds undergo a magnetic phase transition of the second type. Based on magnetic isotherms, magnetic entropy change (ΔSM) was determined for many values of the magnetic field change (µ0H), which varied from 0.1 to 7 T. For each compound, the ΔSM had a maximum around the Curie temperature. Both values of the |ΔSMmax| and relative cooling power RCP parameters increased with increasing nickel content. It is shown that structural disorder upon Co/Ni substitution influences some magnetic parameters. The magnetic moment values of Co atoms determined from different methods are quantitatively consistent. From the M(T) dependency, the exchange integrals JRR, JRT, and JTT between rare-earths (R) and transition metal (T) moments were evaluated within the mean-field theory (MFT) approach. The experimental study of the electronic structure performed with the use of the X-ray photoelectron spectroscopy (XPS) was completed by calculations using the full-potential linearized augmented plane waves (FP-LAPW) method based on the density functional theory (DFT). The calculations explained experimentally observed changes in the XPS valence band spectra upon the Ni/Co substitution.
Asunto(s)
Magnetismo , Elementos de Transición , Modelos Moleculares , Elementos de Transición/química , Fenómenos Magnéticos , ElectrónicaRESUMEN
We present the study of pristine and calcined f-MWCNTs functionalized by nitrogen-containing functional groups. We focus on the structural and microstructural modification tuned by the previous annealing. However, our primary goal was to analyze the electronic structure and magnetic properties in relation to the structural properties using a multi-technique approach. The studies carried out by X-ray diffraction, XPS, and 57Fe Mössbauer spectrometry revealed the presence of γ-Fe nanoparticles, Fe3C, and α-FeOOH as catalyst residues. XPS analysis based on the deconvolution of core level lines confirmed the presence of various nitrogen-based functional groups due to the purification and functionalization process of the nanotubes. The annealing procedure leads to a structural modification mainly associated with removing surface impurities as purification residues. Magnetic studies confirmed a significant contribution of Fe3C as evidenced by a Curie temperature estimated at TC = 452 ± 15 K. A slight change in magnetic properties upon annealing was revealed. The detailed studies performed on nanotubes are extremely important for the further synthesis of composite materials based on f-MWCNTs.
RESUMEN
Biodegradable magnesium alloys with Zn, Yb, Ca and Sr additions are potential materials with increased corrosion resistance in physiological fluids that ensure a controlled resorption process in the human body. This article presents the influence of the use of a high cooling rate on the corrosion behavior of Mg60Zn20Yb15.7Ca2.6Sr1.7 alloy proposed for medical applications. The microstructure of the alloy in a form of high-pressure die-casted plates was presented using scanning electron microscopy in the backscattered electrons (BSEs) mode with energy-dispersive X-ray spectrometer (EDX) qualitative analysis of chemical composition. The crystallization mechanism and thermal properties were described on the basis of differential scanning calorimetry (DSC) results. The corrosion behavior of Mg60Zn20Yb15.7Ca2.6Sr1.7 alloy was analyzed by electrochemical studies with open circuit potential (EOCP) measurements and polarization tests. Moreover, light microscopy and X-ray photoelectron spectroscopy were used to characterize the corrosion products formed on the surface of studied samples. On the basis of the results, the influence of the cooling rate on the improvement in the corrosion resistance was proved. The presented studies are novel and important from the point of view of the impact of the technology of biodegradable materials on corrosion products that come into direct contact with the tissue environment.
RESUMEN
Nanoparticles of Ni0.3Zn0.4Ca0.3Fe2O4 (NZCF) were successfully prepared by the facile wet chemical method coupled with the sonochemical method. These nanoparticles were embedded in a graphene oxide (GO) matrix (NZCFG). Rietveld analyses of X-ray diffraction, transmission electron microscope, scanning electron microscope, and X-ray photoelectron spectroscopy were carried out to extract different relevant information regarding the structure, morphology, and ionic state. A major improvement in saturation magnetization is achieved due to substitution of Ca2+ in the ferrite lattice. Interestingly, the observed value of electromagnetic absorption for a sample thickness of 1.5 mm is â¼-67.7 dB at 13.3 GHz, and the corresponding bandwidth is 5.73 GHz. The Cole-Cole plot, the Jonscher power-law fitting, and the Nyquist plot confirm the probability of improved hopping conductance and attractive capacitive behavior in NZCFG. The presence of magnetic energy morphing in combination with a higher attenuation constant, lower skin depth, and various forms of resonance and relaxation makes NZCFG the most suitable for microwave absorption.
RESUMEN
The aim of this work was to characterize the structure and corrosion properties of the MgCa4.5(Gd0.5) alloys surface treated by the micro-arc oxidation (MAO) process. The MgCa4.5 and MgCa4.5Gd0.5 alloy samples were processed by MAO in an electrolyte composed of NaOH (10 g/dm3), NaF (10 g/dm3), NaH2PO4 (5 g/dm3), Na2SiO2·5H2O (10 g/dm3) and water. Two different voltages (120 V and 140 V) were used in the MAO process. The alloys protected by an oxide layer formed in the MAO were then the subject of corrosion resistance tests in an environment simulating the human body (Ringer's solution). After the experiments, the resulting samples were investigated using SEM, XPS and EDS techniques. The addition of Gd affected the fragmentation of the coating structure, thereby increasing the specific surface; higher voltages during the MAO process increased the number and size of surface pores. Corrosion tests showed that the MgCa4.5Gd0.5 alloys were characterized by low polarization resistances and high corrosion current densities. The studies indicated the disadvantageous influence of gadolinium on the corrosion resistance of MgCa4.5 alloys. The immersion tests confirmed lower corrosion resistance of MgCa4.5Gd0.5 alloys compared to the referenced MgCa4.5 ones. The MgCa4.5 alloy with the MAO coating established at voltage 140 V demonstrated the best anticorrosion properties.
RESUMEN
Magnetic nanocomposites SmCo5/α-Fe were synthesized mechanically by high-energy ball milling (HEBM) from SmCo5 and 5%wt. of α-Fe powders. The X-ray diffraction analysis reveals the hexagonal 1:5 phase as the main one accompanied by the cubic α-Fe phase and 2:17 rhombohedral as the secondary phase. The content of each detected phase is modified throughout the synthesis duration. A significant decrease in crystallite size with a simultaneous increase in lattice straining is observed. A simultaneous gradual reduction in particle size is noted from the microstructural analysis. Magnetic properties reveal non-linear modification of magnetic parameters associated with the strength of the exchange coupling induced by various duration times of mechanical synthesis. The highest value of the maximum energy product (BH)max at room temperature is estimated for samples milled for 1 and 6 h. The intermediate mixed-valence state of Sm ions is confirmed by electronic structure analysis. An increase in the Co magnetic moment versus the milling time is evidenced based on the performed fitting of the Co3s core level lines.
RESUMEN
We describe a bottom-up surface functionalization to design hybrid molecular coatings that tether biomembranes using wet chemistry. First, a monolayer was formed by immersion in a NH2-Ar-SO3H solution, allowing aryldiazonium salt radicals to spontaneously bind to it via strong C bonding. After formation of the air-stable and dense molecular monolayer (-Ar-SO3H), a subsequent activation was used to form highly reactive -Ar-SO2Cl groups nearly perpendicular to the monolayer. These can bind commercial surfactants, PEGylated oligomers and other inexpensive molecules via their -OH, -COOH, or -NH2 chain end-moieties, to build hybrid coatings. Metal and oxidized chromium, semi-conductor n-doped silicon (111), are the substrates tested for this protocol and the aromatic organic monolayers formed at their surface are characterized by X-ray photoelectron spectroscopy (XPS). XPS reveals unambiguously the presence of C-Cr and C-Si bonds, ensuring robustness of the coatings. Functional sulfur groups (-SO3H) cover up to 6.5×10-10 mol cm-2 of the silicon interface and 4.7×10-10 mol cm-2 of the oxidized chromium interface. These surface concentrations are comparable to the classic values obtained when the prefunctionalisation is driven by electrochemistry on conductors. Tethered lipid membranes formed on these coatings were analyzed by neutron reflectivity at the interface of functionalized n-doped silicon substrates after immersion in a solution of lipid vesicles and subsequent fusion. Results indicate a rather compact hybrid coating of Brij anchor-harpoon molecules that maintain a single lipid bilayer above the substrate, on top of a hydrated PEO cushion.
Asunto(s)
Membrana Dobles de Lípidos , Silicio , Electroquímica , Ácidos Sulfónicos , TensoactivosRESUMEN
We report on the comprehensive experimental and theoretical studies of magnetic and electronic structural properties of the Gd0.4Tb0.6Co2 compound crystallization in the cubic Laves phase (C15). We present new results and compare them to those reported earlier. The magnetic study was completed with electronic structure investigations. Based on magnetic isotherms, magnetic entropy change (ΔSM) was determined for many values of the magnetic field change (Δµ0H), which varied from 0.1 to 7 T. In each case, the ΔSM had a maximum around room temperature. The analysis of Arrott plots supplemented by a study of temperature dependency of Landau coefficients revealed that the compound undergoes a magnetic phase transition of the second type. From the M(T) dependency, the exchange integrals between rare-earth R-R (JRR), R-Co (JRCo), and Co-Co (JCoCo) atoms were evaluated within the mean-field theory approach. The electronic structure was determined using the X-ray photoelectron spectroscopy (XPS) method as well as by calculations using the density functional theory (DFT) based Full Potential Linearized Augmented Plane Waves (FP-LAPW) method. The comparison of results of ab initio calculations with the experimental data indicates that near TC the XPS spectrum collects excitations of electrons from Co3d states with different values of exchange splitting. The values of the magnetic moment on Co atoms determined from magnetic measurements, estimated from the XPS spectra, and results from ab initio calculations are quantitatively consistent.