Efficient graphene-coated iron oxide (GCIO) nanoadsorbent for removal of lead and arsenic ions.

ABSTRACTThe graphene-coated iron oxide (GCIO) was used for the removal of Pb2+ and As3+ ions from aqueous solution. For the characterization of GCIO, several techniques (FTIR, XRD, EDX, SEM, TEM, TGA, DSC and vibrating sample magnetometry) were used which indicated the interaction of Pb2+ and As3+ with adsorbent. In addition, the effects of adsorbate concentration, different composition of adsorbent, temperature, pH of the solution and contact time of adsorbate-adsorbent were studied. After analysis of these experiments, it was found that GCIO offered very fast removal of Pb2+ and As3+ with small amount of GCIO (0.09 g) in 100 mg/L adsorbate solution. The maximum removal of Pb2+ ions (up to 97.62%) was achieved when 100 mg/L standard solution of metal ion was treated with GCIO for 35 min at 45°C in weak acidic medium (5 pH). The adsorption of Pb2+ ions followed Freundlich model with high correlation coefficient 0.98 R2. In case of As3+ ions, maximum removal of metal ion (up to 86.62%) was attained when 100 mg/L adsorbate solution is treated with GCIO for 25 min in slightly acidic medium (6 pH) at 25°C. The adsorption of As3+ ions followed D-R model with 0.98 R2 value. The adsorption of both metal ions (Pb2+ and As3+) follows second-order kinetic model. The high percentage removal of metal ions with little quantity of GCIO confirmed that GCIO is an excellent, effective and economic adsorbent.

Synthesis of Poly(2-Hydroxyethyl Methacrylate) (PHEMA)-Based Superparamagnetic Nanoparticles for Biomedical and Pharmaceutical Applications.

The performance of polymeric nanomaterials relies greatly upon their properties which are intimately related to the methods of fabrication of their materials. Among various synthetic polymers the polymers of 2-hydroxyethyl methacrylate (PHEMA) maintains a prime position in the biomedical field due to their useful physicochemical properties and suitability for controlled drug delivery applications. Furthermore, the addition of iron oxide to PHEMA nanoparticles imparts superparamagnetism to the nanoparticles and expands the range of their uses to include magnetic drug targeting applications. Here we focus on three methods for preparation of PHEMA nanoparticles, one by suspension polymerization, a second by emulsion polymerization without the use of any surfactants, and the final one with the incorporation of iron oxide into PHEMA nanoparticles.

Predictions of Drug-Protein Interactions and Study of Magnetically Assisted Release Dynamics of 5-Fluorouracil from Soya Protein-Coated Iron Oxide Core-Shell Nanoparticles.

In silico studies were performed using 5-fluorouracil (5-FU) to explore the efficacy of template docking and facilitate designing of drug nanocarrier systems. The binding of human uridine phosphorylase (huPP1) with 5-FU was found to show the following interactions: (1) hydrogen bonds were alleviated by a network of GLN217 and ARG219, (2) hydrophobic interactions were shown by PHE213, THR141, LEU272, and ILE281 (3) positive electrostatic interactions were shown by PHE213, THR141, LEU272, SER142, GLU248, and GLY143. As an experimental supplementation and validation to the adopted computational approach, 5- FU-loaded soya protein-coated iron oxide (SPCIO) core-shell nanoparticles were prepared following microemulsion and co-precipitation techniques and subsequently characterized by FTIR, particle size and zeta potential studies, TEM, XRD, and DSC techniques. Whereas the FTIR spectra confirm the presence of the soya protein and drug 5-FU in the nanoparticles, the zeta potential was found to be suppressed due to the loading of 5-FU. The XRD study confirmed the crystalline nature of the drug-loaded nanoparticles. TEM analysis suggested that the nanoparticles have sizes up to 200 nm and the morphology and size remain almost the same even after loading of the drug 5-FU onto nanoparticles. The soya protein-coated iron oxide nanoparticles demonstrated zero cytotoxicity against fibroblast cells. The controlled release of 5-FU was studied in vitro, and the effects of pH, chemical composition of nanoparticles, extent of drug loading, and simulated biofluids on the controlled release of 5-FU were studied. The swelling of nanoparticles and release of 5-FU were found to increase with increasing strength of the externally applied magnetic field.

Designing of silk and ZnO based antibacterial and noncytotoxic bionanocomposite films and study of their mechanical and UV absorption behavior.

Bionanocomposites of sericin and polyvinyl alcohol (PVA) were prepared by solution casting method and zinc oxide nanoparticles were impregnated within the polymer blend matrix through homogenous phase reaction between zinc chloride and sodium hydroxide at high temperature following an ex-situ co-precipitation method. The prepared bionanocomposites were characterized using Fourier Transform Infrared Spectroscopy, X-ray diffraction, Field Emission Scanning Electron Microscopy, Transmission Electron Microscopy and Atomic Force Microscopy techniques. The presence of characteristic groups of sericin and ZnO nanoparticles was ascertained by the FTIR spectra. XRD analysis confirmed the impregnation of ZnO nanoparticles and sericin within the PVA matrix. XRD and FESEM of the bionanocomposites provided information about their semicrystalline nature, crystallite size of the particles, and irregular rough surfaces. The TEM confirmed the size of ZnO particles to be in the nanometer range. AFM confirmed the platykurtic nature of the surface while the negative surface skewness shows the predominance of valleys over peaks suggesting for the planar nature of the surface of the bionanocomposites. UV absorption properties of bionanocomposite films were determined by UV absorption spectroscopy. UV absorption increased with increasing amount of ZnO nanoparticles in the nanocomposites. Sericin was found to absorb UV-C radiations between 200-290nm which is mainly due to aromatic amino acids like tryptophan, tyrosine and phenylalanine. The ZnO nanoparticles and sericin protein showed antimicrobial properties as evident from the inhibition zones obtained against Staphylococcus aureus and Escherichia coli. The bionanocomposite was found to be noncytotoxic which was proved by in vitro cytotoxicity test. Microhardness of bionanocomposite films increased with increase in the amount of ZnO nanoparticles in the sericin and PVA matrix.

Evaluation of poly (vinyl alcohol) based cryogel-zinc oxide nanocomposites for possible applications as wound dressing materials.

In this investigation cryogels composed of poly (vinyl alcohol) (PVA) were prepared by repeated freeze thaw method followed by in situ precipitation of zinc oxide nanoparticles within the cryogel networks. Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD), Energy dispersive X-ray spectroscopy (EDX) were used to characterize the nanocomposites. The morphologies of native PVA cryogels and PVA cryogel-ZnO nanocomposites were observed by scanning electron microscopy (SEM), transmission electron microscopy (TEM) techniques. The SEM analysis suggested that cryogels show a well-defined porous morphology whereas TEM micrographs revealed the presence of nearly spherical and well separated zinc oxide nanoparticles with diameter<100nm. XRD results showed all relevant Bragg's reflections for crystal structure of zinc oxide nanoparticles. Thermo gravimetric-differential thermal analysis (TG-DTA) was conducted to evaluate thermal stability of the nanocomposites. Mechanical properties of nanocomposites were determined in terms of tensile strength and percent elongation. Biocompatible nature was ascertained by anti-haemolytic activity, bovine serum albumin (blood protein) adsorption and in vitro cytotoxicity tests. The prepared nanocomposites were also investigated for swelling and deswelling behaviours. The results revealed that both the swelling and deswelling process depend on the chemical composition of the nanocomposites, number of freeze-thaw cycles, pH and temperature of the swelling medium. The developed biocompatible PVA cryogel-ZnO nanocomposites were also tested for antibacterial activities against both Gram-negative and Gram-positive bacteria.

Optimizing the release process and modelling of in vitro release data of cis-dichlorodiamminoplatinum (II) encapsulated into poly(2-hydroxyethyl methacrylate) nanocarriers.

Drug encapsulated nanocarriers are vehicles to transport the drug molecules and release them at the immediate vicinity of the diseased sites. The aim of this study was to design poly (2-hydroxyethyl methacrylate) nanoparticles (PHEMANPs) as a swelling and diffusion controlled drug release system for achieving sustained release of (cis-dichlorodiamminoplatinum II) CDDP. The study undertakes designing and characterization of nanocarriers, optimization of drug encapsulation, and investigating release dynamics of the CDDP drug. PHEMANPs were prepared by suspension polymerization method followed by post loading of the CDDP onto the nanocarriers. The physicochemical and biopharmaceutical properties were evaluated by FTIR, TEM, FESEM, EDX, DLS, surface charge, water intake studies, in vitro cytotoxicity, protein adsorption and percent haemolysis. Chemical stability of the drug was assessed and in vitro release experiments were performed to optimize formulation by UV spectral analysis. The obtained cumulative release data were fitted to zero, first and Korsmeyer-Peppas kinetic models to gain insights into release kinetics and prevailing drug transport mechanisms. The successful encapsulation of CDDP was achieved in different PHEMANP formulations with maximum drug encapsulation efficiency of approx. 60% and the release kinetics was found to follow the Korsmeyer-Peppas model having non-Fickian mechanism. The results indicated that the CDDP can be formulated with a high payload of PHEMANPs which can serve as promising nanomedicine and help in achieving sustained delivery of drug for targeting tumour.

An In-vitro Investigation of Swelling Controlled Delivery of Insulin from Egg Albumin Nanocarriers.

The aim of the present work was to prepare and characterize biopolymer nanocarriers and evaluate their suitability in possible oral delivery of insulin. The egg albumin biopolymer was used to prepare nanoparticles which were further characterized by Fourier transformed Infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), zeta potential, Dynamic Light scattering (DLS) and cytotoxicity. From the characterization studies the size of the nanoparticles washemoly found to lie in the range 20-80 nm with surface charge of -23 mV and also offering extremely fair biocompatibility.. The in-vitro biocompatibility of the prepared nanocarriers was judged by BSA adsorption test and haemolysis assay. The in vitro release kinetics of the insulin loaded nanoparticles was studied in phosphate buffer saline (PBS) solution, and the influence of various factors such as pH, temperature and simulated physiological fluids was studied on the controlled release of insulin.

Designing casein-coated iron oxide nanostructures (CCIONPs) as superparamagnetic core-shell carriers for magnetic drug targeting.

Magnetic drug targeting is a drug delivery system applicable to cancer treatment. Coated magnetic particles, called carriers, are very useful for delivering chemotherapeutic drugs. In the present research, casein-coated iron oxide nanocarriers (CCIONPs) of core shell nanostructure have been described as being applicable to magnetic drug targeting. The structure, morphology, and composition of prepared magnetic nanoparticles were determined by analytical techniques like Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Electron diffraction (ED), X-ray diffraction (XRD), Zeta potential, Dynamic light scattering (DLS), Mossbauer and Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Vibrating sample magnetometery (VSM)) and in vitro cytotoxicity analysis. Magnetization studies of CCIONPs conducted at room temperature using a vibrating sample magnetometer suggested their superparamagnetic nature as having a saturation magnetization (Ms) of 64 emu g-1 at an applied magnetic field of 5 kOe. The size of the magnetic polymeric nanoparticles was found to lie in the range of 73.9 ±0.36 nm, and the particles exhibited superparamagnetic behavior. The prepared particles could be used as a drug carrier for controlled and targeted drug delivery.

Investigation of magnetically controlled water intake behavior of Iron Oxide Impregnated Superparamagnetic Casein Nanoparticles (IOICNPs).

Iron oxide impregnated casein nanoparticles (IOICNPs) were prepared by in-situ precipitation of iron oxide within the casein matrix. The resulting iron oxide impregnated casein nanoparticles (IOICNPs) were characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), Vibrating sample magnetometer (VSM) and Raman spectroscopy. The FTIR analysis confirmed the impregnation of iron oxide into the casein matrix whereas XPS analysis indicated for complete oxidation of iron (II) to iron(III) as evident from the presence of the observed representative peaks of iron oxide. The nanoparticles were allowed to swell in phosphate buffer saline (PBS) and the influence of factors such as chemical composition of nanoparticles, pH and temperature of the swelling bath, and applied magnetic field was investigated on the water intake capacity of the nanoparticles. The prepared nanoparticles showed potential to function as a nanocarrier for possible applications in magnetically targeted delivery of anticancer drugs.

Designing slow water-releasing alginate nanoreserviors for sustained irrigation in scanty rainfall areas.

In this study, water absorbing Ca(2+) ion cross-linked alginate nanoparticles were prepared and their water holding capacity was assessed. The prepared nanoparticles were characterized by Fourier transform infra red (FTIR) and X-ray diffraction (XRD) spectroscopy, field emission scanning electron microscopy (FESEM), and Zeta potential measurements to gain insights into their structural and morphological features and to see if the nanoparticles carried a charge over them. The swelling experiments were performed for different compositions of prepared nanoparticles at varied pH and temperatures. The capacity of the nanoparticles to retain imbibed water was evaluated by conducting deswelling studies of the pre-swollen nanoparticles. These particles were mixed with soil and soil-pot experiments were conducted. In order to assess the sustained water release potential of nanoparticles in agricultural fields, the seeds were planted in both native and nanoparticle-mixed soil pots, and moisture content of the soil was measured periodically and growth of the plants was observed.

Serum-soluble urokinase receptor levels do not distinguish focal segmental glomerulosclerosis from other causes of nephrotic syndrome in children.

In this prospective study, we measured serum levels of the soluble urokinase receptor (suPAR) in pediatric patients with nephrotic syndrome of various etiologies. Mean levels of suPAR were 3316 pg/ml in 99 patients with steroid-resistant focal segmental glomerulosclerosis and 3253 pg/ml in 117 patients with biopsy-proven minimal change disease, which were similar to that of 138 patients with steroid-sensitive nephrotic syndrome (3150 pg/ml) and 83 healthy controls (3021 pg/ml). Similar proportions of patients in each group had suPAR over 3000 pg/ml. Compared with controls, suPAR levels were significantly higher in patients with focal segmental glomerulosclerosis (FSGS) and estimated glomerular filtration rate (eGFR) under 30 ml/min per 1.73 m(2) (6365 pg/ml), congenital nephrotic syndrome (4398 pg/ml), and other proteinuric diseases with or without eGFR under 30 ml/min per 1.73 m(2) (5052 and 3875 pg/ml, respectively; both significant). There were no changes following therapy and during remission. Levels of suPAR significantly correlated in an inverse manner with eGFR (r=-0.36) and directly with C-reactive protein (r=0.20). The urinary suPAR-to-creatinine ratio significantly correlated with proteinuria (r=0.25) in 151 patients and controls. Using generalized estimating equations approach, serum suPAR significantly correlated with eGFR (coefficient=-13.75), age at sampling (2.72), and C-reactive protein (39.85). Thus, serum suPAR levels in nephrotic syndrome are similar to controls, and do not discriminate between FSGS, minimal change disease, or steroid-responsive illness.

Synthesis of poly (2-hydroxyethyl methacrylate) (PHEMA) based nanoparticles for biomedical and pharmaceutical applications.

The performance of polymeric nanomaterials relies greatly upon their properties which are intimately related to the methods of fabrication of the materials. Among various synthetic polymers, the polymers of 2-hydroxyetyhyl methacrylate (PHEMA) maintain a prime position in biomedical field due to their useful physicochemical properties and suitability for controlled drug delivery applications. Here we focus on three methods of preparation of PHEMA nanoparticles, by suspension polymerization, emulsion polymerization and dispersion polymerization without the use of any surfactants.

Designing polysaccharide-based antibacterial biomaterials for wound healing applications.

In this study, the development and characterization of novel polymer blends based on chitosan-poly (vinyl alcohol) and physically cross-linked by freeze-thaw method for possible use in a variety of biomedical application is reported. The present investigation deals with designing savlon-loaded blend hydrogels (coined as cryogels) of poly (vinyl alcohol) (PVA) and chitosan by repeated freeze-thaw method and their characterization by SEM and FTIR techniques. The FTIR spectra clearly reveal that savlon-loaded chitosan and PVA blends are bonded together through hydrogen bonding. The SEM analysis suggests that cryogels show a well-defined porous morphology. The prepared cryogels were also investigated for swelling and deswelling behaviors. The results reveal that both the swelling and deswelling behaviors greatly depend on factors like chemical composition of the cryogels, number of freeze-thaw cycles, pH and temperature of the swelling bath. The savlon-loaded blends were also investigated for their in vitro blood compatibility and antibacterial activity.