Influence of keel impacts and laying hen behavior on keel bone damage.

Keel bone damage, which presents as fractures and/or deviations of the keel, has been detected in laying hens housed in all types of systems. Factors leading to keel bone damage in hens housed with limited vertical space, such as those housed in furnished systems, are not well understood, and are the topic of this study. Ten focal hens from each of 12 furnished cages (4 rooms of 3 cages) were fitted with keel mounted tri-axial accelerometers. Their behavior was video recorded continuously over two 3-wk trials: the first when the hens were between 52 and 60 wk of age, and the second approximately 20 wk later. The integrity of each hen's keel was evaluated at the start and end of each 3-wk trial using digital computed tomography. We identified predominant behaviors associated with acceleration events sustained at the keel (collisions, aggressive interactions and grooming) by pairing accelerometer outputs with video data. For each recorded acceleration event we calculated the acceleration magnitudes as the maximum summed acceleration recorded during the event, and by calculating the area under the acceleration curve. A principle components analysis, which was used as a data reduction technique, resulted in the identification of 4 components that were used in a subsequent regression analysis. A key finding is that the number of collisions a hen has with structures in her environment, and the number of aggressive interactions that a hen is involved, each affect the likelihood that she will develop 1 or more fractures within a 3-wk time span. This relationship between hen behavior and keel fracture formation was independent of the magnitude of acceleration involved in the event. Observed behavior did not have an impact on the formation of keel bone deviations, further supporting reports that the mechanisms underlying the 2 types of keel bone damage are different.

Keel bone damage assessment: consistency in enriched colony laying hens.

Damage to the keel bone is a major issue in the laying hen industry. The goal of this study was to compare palpation results of live laying hens to digital computed tomography (CT) images, to assess changes in palpation reliability as training and familiarity increased, and to examine keel bone morphology over time. The longitudinal study consisted of 2 trials of 3 observation periods using 40 different (n = 120) W-36 hens housed in enriched colony cages. The first trial began when hens were 52 to 58 wk of age repeating the trial when the same birds were 74 to 81 wk of age. At 52 wk of age, each hen's keel bone was palpated by a single individual for keel bone caudal tip fractures (Tip), sagittal deviations (Evenness), and transverse deviations (Straightness). After palpation, each hen was placed in a motion limiting restraint and scanned using CT. The hens spent the next 21 d in their cages and on day 21, the hens were collected, palpated, and CT scanned again. The CT scans were imported into Mimics analysis software, 3D models of each keel bone were constructed and evaluated. Each bone and 3D model was scored (0, 1, 2) on the measurement of transverse deviation based on <0.5 cm, 0.51 to 1.0 cm, and >1.0 cm total deviation, respectively. Analysis of data using Proc Freq and Means in SAS 9.3 revealed minimal to moderate kappa values and moderate agreement percentages between palpators and digital analysis. The computer generated 3D models of individual keel bones were compared to palpation scores for Tip, Evenness, and Straightness at the beginning and end of each trial. The visual observations of the 3D models were qualitative, performed by a single individual. Overall, we found CT scanning to be a useful tool in observing changes to the keel bone, we observed changes in palpation accuracy as training/familiarity increased, and examined changes in keel morphology, specifically in the tip, after 52 wk of age.

Keel bone differences in laying hens housed in enriched colony cages.

Keel bone damage may be painful to birds and affect their production. In order to better understand the frequency, position, and timepoint of keel bone damage that occur during production, the integrity of W-36 laying hen keel bones housed in enriched colony cages at 748.4 cm2 (116 in2) was evaluated. At four time points, 120 birds (10 per cage; three cages per each of four rooms) had keel bones evaluated. Each hen was placed in a motion limiting restraint, scanned using computed tomography (CT), fitted in vests containing tri-axial accelerometers, and placed back in their cages for 21 d. After 21 d, the hens were rescanned and returned to their cages. This process was repeated after 133 d. The CT scans were imported into Mimics analysis software (Materialise, Plymouth, MI, USA); 3D models were made of each keel bone at each time point and exported to 3-matic analysis software (Materialise, Plymouth, MI, USA). Each laying hen's keel bone model was superimposed onto scans from multiple time points resulting in four bone pairings representative of each 21-d period, the 133-d period, and the entire duration of the project. Next, the proximal portion of each bone pairing was edited to normalize bone shape according to a strict protocol. Additionally, each pairing was divided into three portions: distal aspect (3 cm), proximal aspect (2 cm), and middle portion (remaining). Whole bone pairing and each bone portion was analyzed using the Part Comparison tool in 3-matic. Raw data were compiled into three datasets and analyzed in SAS 9.3 using the GLIMMIX procedure using a three-level random intercept model. The model controlled for time, part, part(time), and system with random intercepts of bird(cage) and cage. Overall, results revealed that the greatest morphological changes occurred during the first 21-d period with regards to time (P = 0.03) and in the distal aspect of the keel with regards to part (P < 0.0001).