RESUMEN
Downy mildew of grapevine, caused by Plasmopara viticola (Berk. and Curt.) Berl. and de Toni, is one of the most devastating diseases of grapevine, severely affecting grape and wine production and quality worldwide. Infections are usually controlled by the intensive application of synthetic fungicides or by copper-based products in organic farming, rising problems for soil contamination and adverse impacts on environment and human health. While strict regulations attempt to minimize their harmful consequences, the situation calls for the development of alternative fungicidal strategies. This study presents the unprecedented case of a bioceramic, silicon nitride, with antimicrobial properties against P. viticola, but without adverse effects on human cells and environment, opening the way to the possible extension of silicon nitride applications in agriculture. Raman spectroscopic assessments of treated sporangia in conjunction with microscopic observations mechanistically showed that the nitrogen-chemistry of the bioceramic surface affects pathogen's biochemical components and cell viability, thus presenting a high potential for host protection from P. viticola infections.
RESUMEN
Over the next two decades, a strong demographic demand for arthroplastic devices coupled with a decreased efficacy of antibiotics has been predicted to result in an exponential increase in the number of periprosthetic joint infections (PJIs). Advanced strategies are therefore required to improve the local peri-implant immune response and curb the pathogenic events of bacterial adhesion and biofilm formation. The use of biomaterials that autonomously counter infections is one approach to improve orthopedic outcomes. Using conventional molecular biology characterization methods and advanced Raman spectroscopy, this study examined the bacteriostatic response of two bioceramic materials commonly employed as prosthetic implants: zirconia-toughened alumina (ZTA) and silicon nitride (Si3N4). Unlike the ZTA, it was found that non-oxide Si3N4 possesses an inherently anti-infective surface chemistry, which acts in a responsive way against bacterial loading. The mechanistic details of its behavior are elucidated. Non-oxide bioceramics appear to be promising, but their full development requires a transitional approach that integrates the fundamental biochemical concepts with clinical outcomes.
RESUMEN
A clear discrepancy between predicted in vitro and actual in vivo surface phase stability of BIOLOX®delta zirconia-toughened alumina (ZTA) femoral heads has been demonstrated by several independent research groups. Data from retrievals challenge the validity of the standard method currently utilized in evaluating surface stability and raise a series of important questions: (1) Why do in vitro hydrothermal aging treatments conspicuously fail to model actual results from the in vivo environment? (2) What is the preponderant microscopic phenomenon triggering the accelerated transformation in vivo? (3) Ultimately, what revisions of the current in vitro standard are needed in order to obtain consistent predictions of ZTA transformation kinetics in vivo? Reported in this paper is a new in toto method for visualizing the surface stability of femoral heads. It is based on CAD-assisted Raman spectroscopy to quantitatively assess the phase transformation observed in ZTA retrievals. Using a series of independent analytical probes, an evaluation of the microscopic mechanisms responsible for the polymorphic transformation is also provided. An outline is given of the possible ways in which the current hydrothermal simulation standard for artificial joints can be improved in an attempt to reduce the gap between in vitro simulation and reality.
RESUMEN
While the reciprocity between bioceramics and living cells is complex, it is principally governed by the implant's surface chemistry. Consequently, a deeper understanding of the chemical interactions of bioceramics with living tissue could ultimately lead to new therapeutic strategies. However, the physical and chemical principles that govern these interactions remain unclear. The intricacies of this biological synergy are explored within this paper by examining the peculiar surface chemistry of a relatively new bioceramic, silicon nitride (Si3N4). Building upon prior research, this paper aims at obtaining new insights into the biological interactions between Si3N4 and living cells, as a consequence of the off-stoichiometric chemical nature of its surface at the nanometer scale. We show here yet unveiled details of surface chemistry and, based on these new data, formulate a model on how, ultimately, Si3N4 influences cellular signal transduction functions and differentiation mechanisms. In other words, we interpret its reciprocity with living cells in chemical terms. These new findings suggest that Si3N4 might provide unique new medicinal therapies and effective remedies for various bone or joint maladies and diseases.
Asunto(s)
Materiales Biocompatibles , Compuestos de Silicona , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/uso terapéutico , Línea Celular , Supervivencia Celular , Células Cultivadas , Humanos , Ensayo de Materiales , Microscopía Confocal , Modelos Biológicos , Osteoartritis/terapia , Compuestos de Silicona/química , Compuestos de Silicona/uso terapéutico , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Propiedades de SuperficieRESUMEN
Osteoarthritis (OA) is a costly and debilitating condition that is typically not diagnosed early enough to prevent progression of disease. The purpose of this study was to evaluate synovial fluid from knees with and without OA for potential markers of joint inflammation and degradation and to correlate these findings with radiographic severity of disease. With Institutional Review Board approval, synovial fluid samples were collected before the patient undergoing total knee arthroplasty. Control knees (n = 3) were patients younger than 30 years of age with no history of anterior cruciate ligament, posterior cruciate ligament, or meniscal injury, and no surgical history for either knee. Weight-bearing, anterior-posterior radiographic views were used to determine radiographic OA severity using the modified Kellgren and Lawrence scale. Synovial fluid samples from 18 patients (21 knees) were analyzed using a multiplex assay. Matrix metalloproteinase (MMP)-1 (p < 0.001), interleukin (IL)-6 (p < 0.013), IL-8 (p < 0.024), and Chemokine (C-C motif) ligand 5 (CCL5) (p < 0.006) were significantly higher in the synovial fluid of OA patients compared with normal patients. The radiographic score was significantly higher in patients with OA compared with normal knees (p < 0.002). MMP-1 had a moderate positive correlation with MMP-2, IL-6, IL-8, and CCL5. IL-6 had a strong positive correlation with IL-8 and a moderate positive correlation with MMP-2. Monocyte chemotactic protein 1 had a moderate positive correlation with IL-6 and a strong positive correlation with IL-8. Radiographic scores had a strong positive correlation with IL-6 and IL-8 and a moderate positive correlation with MCP-1. These data provide novel and clinically relevant information for the investigation of synovial fluid biomarkers for knee OA.
Asunto(s)
Biomarcadores/análisis , Osteoartritis de la Rodilla/diagnóstico por imagen , Osteoartritis de la Rodilla/diagnóstico , Líquido Sinovial/química , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Masculino , Persona de Mediana Edad , RadiografíaRESUMEN
The failed total knee arthroplasty is a challenge to the surgeon and the patient. Infection, bone loss, and instability lead to a chronically painful and dysfunctional limb. Two-stage revision arthroplasty has been successful in clearing a majority of periprosthetic joint infections. However, there are many cases when the multiply revised and infected total knee arthroplasty cannot be salvaged. We report, a review of knee arthrodesis and a novel technique to manage significant bone loss. The use of trabecular metal cones and a long intramedullary nail can be used in concert with an autologous intramedullary bone graft to provide a stable, length restoring construct with sufficient biology to heal very large bone voids. With this technique we have successfully restored function and stability in the failed knee arthroplasty.
Asunto(s)
Artrodesis/métodos , Artroplastia de Reemplazo de Rodilla/efectos adversos , Fijación Intramedular de Fracturas/métodos , Articulación de la Rodilla/cirugía , Infecciones Relacionadas con Prótesis/cirugía , Artrodesis/instrumentación , Autoinjertos , Clavos Ortopédicos , Resorción Ósea/etiología , Resorción Ósea/cirugía , Trasplante Óseo , Enfermedad Crónica , Femenino , Fijación Intramedular de Fracturas/instrumentación , Humanos , Prótesis de la Rodilla , Metales , Persona de Mediana Edad , Osteomielitis/etiología , Osteomielitis/cirugía , Falla de Prótesis , Infecciones Relacionadas con Prótesis/etiología , Procedimientos de Cirugía Plástica/instrumentación , Procedimientos de Cirugía Plástica/métodos , Reoperación , Terapia Recuperativa , Trasplante AutólogoRESUMEN
Highly cross-linked ultrahigh molecular weight polyethylene (UHMWPE) is increasingly used as a bearing material in total hip replacements. Cross-linking of UHMWPE has been shown to increase wear resistance but decrease its fracture resistance. We analyzed the clinical fracture failure of four cross-linked UHMWPE total hip replacement components of four different designs via microscopic observation of the fracture surfaces, and found that in all cases fractures initiated at stress concentrations in an unsupported region of the component (termed the elevated rim). Finite element analyses (FEA) of each individual implant design were then conducted. Results from this analysis demonstrated that the predicted magnitude and orientation of maximum principal stress due to mechanical loading of the elevated rim was sufficient to propagate initiated fatigue cracks in each case. FEA also predicted that cracks may arrest after some amount of growth due to a steep stress gradient near the initiation site. Further, while anatomical positioning of the implant and material properties affect the risk of fracture, we examined whether these failures are strongly related to the notched elevated rim design feature that is common to the four failed cases presented here. We believe that cross-linked UHMWPE remains an excellent bearing material for total hip replacements but that designs employing this material should mitigate stress concentrations or other design features that increase the risk of fracture.