An innovative approach for the evaluation of prolonged disorders of consciousness using NF-L and GFAP biomarkers: a pivotal study.

Behavioral assessments during the clinical evaluation in prolonged disorders of consciousness patients could be not sufficient for a correct diagnosis and prognostication. To this aim, we used an innovative approach, involving the ultra-sensitive determination of biological markers, correlating them with imaging parameters to investigate the prolonged disorders of consciousness (pDoC).We assessed the serum concentration of neurofilament light chain(NF-L) and glial fibrillary acidic protein (GFAP) in pDoC (n = 16), and healthy controls (HC, n = 6) as well as several clinical imaging parameters such as Fractional Anisotropy (FA), Whole Brain SUV, and White Matter Hyperintensities volumes (WMH) using PET-MRI acquisition. As for differential diagnosis task, only the imaging WMH volume was able to discriminate between vegetative state/unresponsive wakefulness syndrome (VS/UWS), and minimally conscious state (MCS) patients (p-value < 0.01), while all selected markers (both imaging and in vitro) were able to differentiate between pDoC patients and HC. At subject level, serum NF-L concentrations significantly differ according to clinical progression and consciousness recovery (p-value < 0.01), highlighting a potential play for the longitudinal management of these patients.

Digital vs. Freehand Anterior Single-Tooth Implant Restoration.

Replacing a single tooth in the anterior maxilla is one of the greatest challenges in dentistry. Both functional and aesthetic results are to be strictly pursued. Planning and executing such a case through a totally digital methodology eventually guarantee many advantages, above all patient's operative and postoperative comfort. To ascertain this, a BOP analysis was performed which allowed us to evaluate soft tissues health, and more; crestal bone resorption was measured to evaluate hard tissues stability. This assumption was studied through four cases in which patients were alternatively treated with analogic and digital techniques. Four homogeneous patients were recruited. They all needed to extract one of the upper incisors, due to different clinical reasons, and then to replace it with an implant. Each patient was treated with an immediate postextractive implant which was immediately loaded, and finally, analogical and digital techniques were compared. All patients underwent a preoperative CBCT examination. After surgery, patients were checked by the surgeon after 10 days and one month to evaluate the progress of healing and to exclude any prosthetic problem. At 6 months (T1), one year (T2), and three years (T3), intraoral x-rays were performed using customized centring devices, according to the parallel beam technique. All data have been collected in a table and statistically processed; mean and standard deviation were measured. All patients entered an oral hygiene program with six months recall. Dental hygienist checked the BOP at T1, T2, and T3. At every step, similar levels of BOP were recorded. About interproximal bone loss, all patients showed an initial moderate loss (between T1 and T2), followed by stable values between T2 and T3. Despite the important limitations of a study with few cases, these results show a similar outcome comparing digital and analogical methods.

MR Imaging-Histology Correlation by Tailored 3D-Printed Slicer in Oncological Assessment.

3D printing and reverse engineering are innovative technologies that are revolutionizing scientific research in the health sciences and related clinical practice. Such technologies are able to improve the development of various custom-made medical devices while also lowering design and production costs. Recent advances allow the printing of particularly complex prototypes whose geometry is drawn from precise computer models designed on in vivo imaging data. This review summarizes a new method for histological sample processing (applicable to e.g., the brain, prostate, liver, and renal mass) which employs a personalized mold developed from diagnostic images through computer-aided design software and 3D printing. Through positioning the custom mold in a coherent manner with respect to the organ of interest (as delineated by in vivo imaging data), the cutting instrument can be precisely guided in order to obtain blocks of tissue which correspond with high accuracy to the slices imaged. This approach appeared crucial for validation of new quantitative imaging tools, for an accurate imaging-histopathological correlation and for the assessment of radiogenomic features extracted from oncological lesions. The aim of this review is to define and describe 3D printing technologies which are applicable to oncological assessment and slicer design, highlighting the radiological and pathological perspective as well as recent applications of this approach for the histological validation of and correlation with MR images.

Microarray expression in peri-implant tissue next to different titanium implant surfaces predicts clinical outcomes: a split-mouth study.

OBJECTIVES: This split-mouth study evaluated miRNA expression of tissues around implants with different surface treatments. MATERIAL AND METHODS: Each patient of the sample (five men and five women) received two implants (one control and one test) into an edentulous quadrant to support fixed partial dentures. The control implants (Osseotite) had a dual acid-etched (DAE) surface in the apical portion and a machined coronal part, test implants (Full Osseotite, FOSS) were completely DAE. Machined healing abutments were placed on control implants and DAE abutments on test ones. All implants were assigned codes for blinding. Standardized periapical radiographs were taken at baseline, 2 and 6 months, and 1 year after surgery. Plaque index (PI), bleeding on probing (BOP), and probing depth (PD) were recorded at 3 and 6 weeks, and 2, 3, 6, and 12 months post-implant placement. After 3 months, a mini-invasive sample of soft tissue was collected from seven patients (four women and three men) for miRNA microarray analysis. RESULTS: Control implants showed greater bone resorption (BR) and lower PI: this was not statistically significant. No statistically significant differences in BOP and PD appeared. miRNA modulated by implant surfaces as well as by other clinical conditions has been identified. miRNA microarray analysis revealed that: (i) implant sites with low PI and absence of BOP had a miRNA expression profile similar to those with plaque and absence of BOP; sites with high PI and high BOP had a different profile. (ii) Implant sites with BOP presented similar profiles independently from implant surface. (iii) Implant sites with high PI and normal BR differed from others for miRNA expression profile. (iv) Implant sites with normal BR despite high BOP differed from others. This profile resembled that of FOSS implants. (v) Implant surface affected BR; groups having similar BR clusterized differently according to the implant type. CONCLUSIONS: DAE surfaces induced lower BR and more plaque accumulation: This did not affect the health of soft tissues. miRNA analysis indicated that soft tissue inflammation is more related to gene expression profile than to plaque or to implant surface. Specific miRNA profile can protect implant sites from bleeding and BR irrespective of plaque accumulation.

Biphosphonates-associated osteonecrosis of the jaw: the role of gene-environment interaction.

Biphosphonate (BPN) are widely used in clinics to treat metastatic cancer and osteoporosis thus representing a problem not only for patients but also for workers involved in their preparation and administration. A similar exposure occurred years ago in match-making workers undergoing bone alterations similar to those consequent to BPN exposure. Osteonecrosis of the jaw (ONJ) is a main adverse effect related to BPN administration, which is performed in millions of patients worldwide for osteoporosis and cancer therapy, thus representing an emerging problem in public health. In susceptible patients, BPN induce severe, progressive, and irreversible degeneration of facial bones, resulting in avascular ONJ often triggered by dental surgery. BPN induced ONJ occurs in subjects depending on lifestyle factors of both environmental and endogenous origins. Exogenous risk factors include cigarette smoke, alcohol consumption, bacterial infections, and cyclosporine therapy. Endogenous risk factors include systemic diseases such as diabetes or hypertension and adverse polymorphisms of genes involved in metabolism (CYPs, MTHFR), thrombosis (Factor V, Prothrombin), and detoxification (MDR). Available molecular findings provide evidence that ONJ is related to risk-factors associated with environmental mutagenesis and gene-environment interactions. This issues may be useful to identify susceptible subjects by molecular analyses in order to prevent ONJ occurrence.

Sinus floor elevation using osteotomes or piezoelectric surgery.

The aim of this paper is to describe a technique for sinus floor augmentation with a 1-step crestal approach where the residual bone is ≤ 7.5mm. 36 implants were installed in 25 patients in the atrophic posterior maxilla immediately after sinus floor elevation. Sinus floor elevation was performed with a crestal approach using either osteotomes and burs or piezosurgery. Standardized intraoral radiographs were taken prior to surgery and 1 year after surgery. The mean residual bone height was 5.61 mm (range 3-7.5mm). The mean gain of sinus elevation was 6.78 mm (range 3.5-10mm) at 1 year after surgery. Two patients dropped out of the study. Of the 23 patients completing the study, one implant failed, whilst the remaining 33 implants were stable 12 months after surgery (cumulative survival rate 97%). A statistically significantly higher bone height was achieved with tapered implants compared with cylindrical implants (P<0.05). No statistically significant differences were found in bone level using osteotomes or piezosurgery. Piezosurgery was considered to provide less discomfort for the patient and greater convenience for the surgeon.

Degenerative periodontal-diseases and oral osteonecrosis: the role of gene-environment interactions.

Chronic-degenerative dentistry diseases, including periodontal diseases and oral osteonecrosis, are widespread in human populations and represent a significant problem for public health. These diseases result from pathogenic mechanisms created by the interaction between environmental genotoxic risk-factors and genetic assets conferring individual susceptibility. Osteonecrosis occurs in subjects undergoing exposure to high doses of DNA-damaging agents for chemo- and radiotherapy of neoplastic diseases. In susceptible patients, ionizing radiation and biphosphonate-chemotherapy induce severe, progressive, and irreversible degeneration of facial bones, resulting in avascular necrosis of the jaw. This may also occur in patients receiving biphosphonate for osteoporosis therapy. Periodontal diseases include chronic, aggressive, and necrotizing periodontitis, often resulting in severe alteration of periodontal tissues and tooth loss. Cigarette smoking and chronic inflammation caused by specific bacteria are the main risk factors for periodontitis. Oxidative damage plays a fundamental pathogenic role, as established by detection of mitochondrial DNA damage in the gingival tissue of patients with periodontitis. Endogenous risk factors in dental diseases include polymorphisms for metabolic enzymes such as glutathione transferases M1 and T1, N-acetyl transferase 2, and CYP 1A1. Other genetic polymorphisms that confer susceptibility to dentistry diseases affect genes encoding metalloproteases (involved in periodontal tissue remodeling and degradation), cytokines (involved in inflammation), prothrombin, and DNA repair activities. These findings provide evidence that dentistry diseases are related to risk factors associated with environmental mutagenesis. This issue warrants future investigations aimed at improving oral health and preventing oral degenerative diseases using molecular and experimental approaches currently utilized in mutagenicity studies.

Use of Yarrowia lipolytica strains for the treatment of olive mill wastewater.

The principal aim of this research was to evaluate the ability of different Yarrowia lipolytica strains, having different origin, to grow in olive mill wastewater (OMW) and reduce its COD level. All the strains were able to grow in undiluted OMW; the comparison between the data obtained in a semi-synthetic medium and in OMW suggests that lipases with different specificity can be produced in relation to the medium composition. Under the adopted conditions, the reduction of the OMW COD values varied from 1.47% and 41.22% of the initial value. Some strains determined a significant reduction of polyphenol content, while other ones caused its apparent increase. Moreover, some Y. lipolytica strains, isolated from chilled foods, produced the highest citric acid concentrations. These results evidenced that some Y. lipolytica strains are good candidates for the reduction of the pollution potential of OMW and for the production of enzymes and metabolites such as lipase and citric acid.

Interactions between high pressure homogenization and antimicrobial activity of lysozyme and lactoperoxidase.

It was the objective of this work to evaluate the effect of high pressure homogenization on the activity of antimicrobial enzymes such as lysozyme and lactoperoxidase against a selected group of Gram positive and Gram negative species inoculated in skim milk. Lactobacillus helveticus, Lactobacillus plantarum and Listeria monocytogenes were the most pressure resistant species while Bacillus subtilis, Pseudomonas putida, Salmonella typhimurium, Staphylococcus aureus, Proteus vulgaris and Salmonella enteritidis were found to be very sensitive to the hyperbaric treatment. The enzyme addition enhanced the instantaneous pressure efficacy on almost all the considered species as indicated by their instantaneous viability loss following the treatment. Moreover, the combination of the enzyme and high pressure homogenization significantly affected the recovery and growth dynamics of several of the considered species. Although L. monocytogenes was slightly sensitive to pressure, the combination of the two stress factors induced a significant viability loss within 3 h and an extension of lag phases in skim milk during incubation at 37 degrees C. The hypothesis formulated in this work is that the interaction of high pressure homogenization and lysozyme or lactoperoxidase is associated to conformational modifications of the two proteins with a consequent enhancement of their activity. This hypothesis is supported by the experimental results also regarding the increased antimicrobial activity against L. plantarum of the previously pressurised lysozyme with respect to that of the native enzyme.

Functional analysis of proteins involved in Plasmodium falciparum merozoite invasion of red blood cells.

Plasmodium falciparum causes the most lethal form of malaria in humans and is responsible for over two million deaths per year. The development of a vaccine against this parasite is an urgent priority and potential protein targets include those on the surface of the asexual merozoite stage, the form that invades the host erythrocyte. The development of methods to transfect P. falciparum has enabled the construction of gain-of-function and loss-of-function mutants and provided new strategies to analyse the role of parasite proteins. In this review, we describe the use of this technology to examine the role of merozoite antigens in erythrocyte invasion and to address their potential as vaccine candidates.

RAP1 controls rhoptry targeting of RAP2 in the malaria parasite Plasmodium falciparum.

Rhoptry associated protein 1 (RAP1) and 2 (RAP2), together with a poorly described third protein RAP3, form the low molecular weight complex within the rhoptries of Plasmodium falciparum. These proteins are thought to play a role in erythrocyte invasion by the extracellular merozoite and are important vaccine candidates. We used gene-targeting technology in P.falciparum blood-stage parasites to disrupt the RAP1 gene, producing parasites that express severely truncated forms of RAP1. Immunoprecipitation experiments suggest that truncated RAP1 species did not complex with RAP2 and RAP3. Consistent with this were the distinct subcellular localizations of RAP1 and 2 in disrupted RAP1 parasites, where RAP2 does not traffic to the rhoptries but is instead located in a compartment that appears related to the lumen of the endoplasmic reticulum. These results suggest that RAP1 is required to localize RAP2 to the rhoptries, supporting the hypothesis that rhoptry biogenesis is dependent in part on the secretory pathway in the parasite. The observation that apparently host-protective merozoite antigens are not essential for efficient erythrocyte invasion has important implications for vaccine design.