RESUMEN
Flowering plants exhibit a wide range of sexual reproduction systems, with the majority being hermaphroditic. However, some plants, such as Actinidia arguta (kiwiberry), have evolved into dioecious species with distinct female and male vines. In this study, we investigated the flower load and growth habits of female kiwiberry genotypes to identify the genetic basis of high yield with low maintenance requirements. Owing to the different selection approaches between female and male genotypes, we further extended our study to male kiwiberry genotypes. By combining both investigations, we present a novel breeding tool for dioecious crops. A population of A. arguta seedlings was phenotyped for flower load traits, in particular the proportion of non-floral shoots, proportion of floral shoots, and average number of flowers per floral shoot. Quantitative trait locus (QTL) mapping was used to analyse the genetic basis of these traits. We identified putative QTLs on chromosome 3 associated with flower-load traits. A pleiotropic effect of the male-specific region of the Y chromosome (MSY) on chromosome 3 affecting flower load-related traits between female and male vines was observed in an A. arguta breeding population. Furthermore, we utilized Genomic Best Linear Unbiased Prediction (GBLUP) to predict breeding values for the quantitative traits by leveraging genomic data. This approach allowed us to identify and select superior genotypes. Our findings contribute to the understanding of flowering and fruiting dynamics in Actinidia species, providing insights for kiwiberry breeding programs aiming to improve yield through the utilization of genomic methods and trait mapping. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01476-7.
RESUMEN
In dioecious crops such as Actinidia arguta (kiwiberries), some of the main challenges when breeding for fruit characteristics are the selection of potential male parents and the long juvenile period. Currently, breeding values of male parents are estimated through progeny tests, which makes the breeding of new kiwiberry cultivars time-consuming and costly. The application of best linear unbiased prediction (BLUP) would allow direct estimation of sex-related traits and speed up kiwiberry breeding. In this study, we used a linear mixed model approach to estimate narrow sense heritability for one vine-related trait and five fruit-related traits for two incomplete factorial crossing designs. We obtained BLUPs for all genotypes, taking into consideration whether the relationship was pedigree-based or marker-based. Owing to the high cost of genome sequencing, it is important to understand the effects of different sources of relationship matrices on estimating breeding values across a breeding population. Because of the increasing implementation of genomic selection in crop breeding, we compared the effects of incorporating different sources of information in building relationship matrices and ploidy levels on the accuracy of BLUPs' heritability and predictive ability. As kiwiberries are autotetraploids, multivalent chromosome formation and occasionally double reduction can occur during meiosis, and this can affect the accuracy of prediction. This study innovates the breeding programme of autotetraploid kiwiberries. We demonstrate that the accuracy of BLUPs of male siblings, without phenotypic observations, strongly improved when a tetraploid marker-based relationship matrix was used rather than parental BLUPs and female siblings with phenotypic observations. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-023-01419-8.
RESUMEN
BACKGROUND: Tuber bruising in tetraploid potatoes (Solanum tuberosum) is a trait of economic importance, as it affects tubers' fitness for sale. Understanding the genetic components affecting tuber bruising is a key step in developing potato lines with increased resistance to bruising. As the tetraploid setting renders genetic analyses more complex, there is still much to learn about this complex phenotype. Here, we used capture sequencing data on a panel of half-sibling populations from a breeding programme to perform a genome-wide association analysis (GWAS) for tuber bruising. In addition, we collected transcriptomic data to enrich the GWAS results. However, there is currently no satisfactory method to represent both GWAS and transcriptomics analysis results in a single visualisation and to compare them with existing knowledge about the biological system under study. RESULTS: When investigating population structure, we found that the STRUCTURE algorithm yielded greater insights than discriminant analysis of principal components (DAPC). Importantly, we found that markers with the highest (though non-significant) association scores were consistent with previous findings on tuber bruising. In addition, new genomic regions were found to be associated with tuber bruising. The GWAS results were backed by the transcriptomics differential expression analysis. The differential expression notably highlighted for the first time the role of two genes involved in cellular strength and mechanical force sensing in tuber resistance to bruising. We proposed a new visualisation, the HIDECAN plot, to integrate the results from the genomics and transcriptomics analyses, along with previous knowledge about genomic regions and candidate genes associated with the trait. CONCLUSION: This study offers a unique genome-wide exploration of the genetic components of tuber bruising. The role of genetic components affecting cellular strength and resistance to physical force, as well as mechanosensing mechanisms, was highlighted for the first time in the context of tuber bruising. We showcase the usefulness of genomic data from breeding programmes in identifying genomic regions whose association with the trait of interest merit further investigation. We demonstrate how confidence in these discoveries and their biological relevance can be increased by integrating results from transcriptomics analyses. The newly proposed visualisation provides a clear framework to summarise of both genomics and transcriptomics analyses, and places them in the context of previous knowledge on the trait of interest.
Asunto(s)
Solanum tuberosum , Solanum tuberosum/genética , Solanum tuberosum/metabolismo , Tetraploidía , Sitios de Carácter Cuantitativo , Estudio de Asociación del Genoma Completo , Fitomejoramiento , Tubérculos de la Planta/metabolismo , FenotipoRESUMEN
Volatile esters are key compounds contributing to flavor intensity in commonly consumed fruits including apple (Malus domestica), strawberry (Fragaria spp.), and banana (Musa sapientum). In kiwifruit (Actinidia spp.), ethyl butanoate and other esters have been proposed to contribute fruity, sweet notes to commercial cultivars. Here, we investigated the genetic basis for ester production in Actinidia in an A. chinensis mapping population (AcMPO). A major quantitative trait loci for the production of multiple esters was identified at the high-flavor intensity (HiFI) locus on chromosome 20. This locus co-located with eight tandemly arrayed alcohol acyl transferase genes in the Red5 genome that were expressed in a ripening-specific fashion that corresponded with ester production. Biochemical characterization suggested two genes at the HiFI locus, alcohol acyl transferase 16-b/c (AT16-MPb/c), probably contributed most to the production of ethyl butanoate. A third gene, AT16-MPa, probably contributed more to hexyl butanoate and butyl hexanoate production, two esters that segregated in AcMPO. Sensory analysis of AcMPO indicated that fruit from segregating lines with high ester concentrations were more commonly described as being "fruity" as opposed to "beany". The downregulation of AT16-MPa-c by RNAi reduced ester production in ripe "Hort16A" fruit by >90%. Gas chromatography-olfactometry indicated the loss of the major "fruity" notes contributed by ethyl butanoate. A comparison of unimproved Actinidia germplasm with those of commercial cultivars indicated that the selection of fruit with high concentrations of alkyl esters (but not green note aldehydes) was probably an important selection trait in kiwifruit cultivation. Understanding ester production at the HiFI locus is a critical step toward maintaining and improving flavor intensity in kiwifruit.
Asunto(s)
Actinidia , Fragaria , Malus , Musa , Actinidia/genética , Aldehídos , Caproatos/análisis , Ésteres , Frutas/química , Frutas/genética , Malus/genéticaRESUMEN
The current research aimed to investigate the effect of pulsed electric fields (1 kV/cm; 50 and 150 kJ/kg) followed by blanching (3 min., 100 °C) on the colour development of potato slices during frying on a kinetic basis. Four potato cultivars 'Crop77', 'Moonlight', 'Nadine', and 'Russet Burbank' with different content of glucose and amino acids were used. Lightness (L* values from colorimeter measurement) was used as a parameter to assess the colour development during frying. The implementation of PEF and blanching as sequential pre-treatment prior to frying for all potato cultivars was found effective in improving their lightness in the fried products. PEF pre-treatment did not change the kinetics of L* reduction during frying (between 150 and 190 °C) which followed first-order reaction kinetics. The estimated reaction rate constant (k) and activation energy (Ea based on Arrhenius equation) for non-PEF and PEF-treated samples were cultivar dependent. The estimated Ea values during the frying of PEF-treated 'Russet Burbank' and 'Crop77' were significantly (p < 0.05) lower (up to 30%) than their non-PEF counterparts, indicating that the change in k value of L* became less temperature dependence during frying. This kinetic study is valuable to aid the optimisation of frying condition in deep-fried potato industries when PEF technology is implemented.
RESUMEN
SUMMARY: We present sismonr, an R package for an integral generation and simulation of in silico biological systems. The package generates gene regulatory networks, which include protein-coding and non-coding genes along with different transcriptional and post-transcriptional regulations. The effect of genetic mutations on the system behaviour is accounted for via the simulation of genetically different in silico individuals. The ploidy of the system is not restricted to the usual haploid or diploid situations but can be defined by the user to higher ploidies. A choice of stochastic simulation algorithms allows us to simulate the expression profiles of the genes in the in silico system. We illustrate the use of sismonr by simulating the anthocyanin biosynthesis regulation pathway for three genetically distinct in silico plants. AVAILABILITY AND IMPLEMENTATION: The sismonr package is implemented in R and Julia and is publicly available on the CRAN repository (https://CRAN.R-project.org/package=sismonr). A detailed tutorial is available from GitHub at https://oliviaab.github.io/sismonr/. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.
Asunto(s)
Algoritmos , Programas Informáticos , Simulación por Computador , Redes Reguladoras de Genes , Humanos , PloidiasRESUMEN
Motivation: Knowledge of haplotypes, i.e. phased and ordered marker alleles on a chromosome, is essential to answer many questions in genetics and genomics. By generating short pieces of DNA sequence, high-throughput modern sequencing technologies make estimation of haplotypes possible for single individuals. In polyploids, however, haplotype estimation methods usually require deep coverage to achieve sufficient accuracy. This often renders sequencing-based approaches too costly to be applied to large populations needed in studies of Quantitative Trait Loci. Results: We propose a novel haplotype estimation method for polyploids, TriPoly, that combines sequencing data with Mendelian inheritance rules to infer haplotypes in parent-offspring trios. Using realistic simulations of both short and long-read sequencing data for banana (Musa acuminata) and potato (Solanum tuberosum) trios, we show that TriPoly yields more accurate progeny haplotypes at low coverages compared to existing methods that work on single individuals. We also apply TriPoly to phase Single Nucleotide Polymorphisms on chromosome 5 for a family of tetraploid potato with 2 parents and 37 offspring sequenced with an RNA capture approach. We show that TriPoly haplotype estimates differ from those of the other methods mainly in regions with imperfect sequencing or mapping difficulties, as it does not rely solely on sequence reads and aims to avoid phasings that are not likely to have been passed from the parents to the offspring. Availability and implementation: TriPoly has been implemented in Python 3.5.2 (also compatible with Python 2.7.3 and higher) and can be freely downloaded at https://github.com/EhsanMotazedi/TriPoly. Supplementary information: Supplementary data are available at Bioinformatics online.
Asunto(s)
Algoritmos , Poliploidía , Alelos , Haplotipos , Secuenciación de Nucleótidos de Alto Rendimiento , Análisis de Secuencia de ADNRESUMEN
BACKGROUND: Somatic cell selection in plants allows the recovery of spontaneous mutants from cell cultures. When coupled with the regeneration of plants it allows an effective approach for the recovery of novel traits in plants. This study undertook somatic cell selection in the potato (Solanum tuberosum L.) cultivar 'Iwa' using the sulfonylurea herbicide, chlorsulfuron, as a positive selection agent. RESULTS: Following 5 days' exposure of potato cell suspension cultures to 20 µg/l chlorsulfuron, rescue selection recovered rare potato cell colonies at a frequency of approximately one event in 2.7 × 105 of plated cells. Plants that were regenerated from these cell colonies retained resistance to chlorsulfuron and two variants were confirmed to have different independent point mutations in the acetohydroxyacid synthase (AHAS) gene. One point mutation involved a transition of cytosine for thymine, which substituted the equivalent of Pro-197 to Ser-197 in the AHAS enzyme. The second point mutation involved a transversion of thymine to adenine, changing the equivalent of Trp-574 to Arg-574. The two independent point mutations recovered were assembled into a chimeric gene and binary vector for Agrobacterium-mediated transformation of wild-type 'Iwa' potato. This confirmed that the mutations in the AHAS gene conferred chlorsulfuron resistance in the resulting transgenic plants. CONCLUSIONS: Somatic cell selection in potato using the sulfonylurea herbicide, chlorsulfuron, recovered resistant variants attributed to mutational events in the AHAS gene. The mutant AHAS genes recovered are therefore good candidates as selectable marker genes for intragenic transformation of potato.
Asunto(s)
Acetolactato Sintasa/genética , Marcadores Genéticos/genética , Plantas Modificadas Genéticamente/fisiología , Mutación Puntual/genética , Selección Genética/genética , Solanum tuberosum/efectos de los fármacos , Solanum tuberosum/fisiología , Sulfonamidas/administración & dosificación , Triazinas/administración & dosificación , Acetolactato Sintasa/metabolismo , Resistencia a los Herbicidas/genética , Herbicidas/administración & dosificación , Células Vegetales/enzimología , Células Vegetales/metabolismoRESUMEN
We present the first evidence for a QTL conditioning an adaptive trait in bulb onion, and the first linkage and population genetics analyses of candidate genes involved in photoperiod and vernalization physiology. Economic production of bulb onion (Allium cepa L.) requires adaptation to photoperiod and temperature such that a bulb is formed in the first year and a flowering umbel in the second. 'Bolting', or premature flowering before bulb maturation, is an undesirable trait strongly selected against by breeders during adaptation of germplasm. To identify genome regions associated with adaptive traits we conducted linkage mapping and population genetic analyses of candidate genes, and QTL analysis of bolting using a low-density linkage map. We performed tagged amplicon sequencing of ten candidate genes, including the FT-like gene family, in eight diverse populations to identify polymorphisms and seek evidence of differentiation. Low nucleotide diversity and negative estimates of Tajima's D were observed for most genes, consistent with purifying selection. Significant population differentiation was observed only in AcFT2 and AcSOC1. Selective genotyping in a large 'Nasik Red × CUDH2150' F2 family revealed genome regions on chromosomes 1, 3 and 6 associated (LOD > 3) with bolting. Validation genotyping of two F2 families grown in two environments confirmed that a QTL on chromosome 1, which we designate AcBlt1, consistently conditions bolting susceptibility in this cross. The chromosome 3 region, which coincides with a functionally characterised acid invertase, was not associated with bolting in other environments, but showed significant association with bulb sucrose content in this and other mapping pedigrees. These putative QTL and candidate genes were placed on the onion map, enabling future comparative studies of adaptive traits.
Asunto(s)
Genes de Plantas , Raíces de Plantas/genética , Mapeo Cromosómico , ADN de Plantas/genética , Ligamiento Genético , Genotipo , Cebollas/genética , Fenotipo , Sitios de Carácter CuantitativoRESUMEN
Onion (Allium cepa L.) is a biennial crop that in temperate regions is planted in the spring and, after a juvenile stage, forms a bulb in response to the lengthening photoperiod of late spring/summer. The bulb then overwinters and in the next season it flowers and sets seed. FLOWERING LOCUS T (FT) encodes a mobile signaling protein involved in regulating flowering, as well as other aspects of plant development. Here we show that in onions, different FT genes regulate flowering and bulb formation. Flowering is promoted by vernalization and correlates with the upregulation of AcFT2, whereas bulb formation is regulated by two antagonistic FT-like genes. AcFT1 promotes bulb formation, while AcFT4 prevents AcFT1 upregulation and inhibits bulbing in transgenic onions. Long-day photoperiods lead to the downregulation of AcFT4 and the upregulation of AcFT1, and this promotes bulbing. The observation that FT proteins can repress and promote different developmental transitions highlights the evolutionary versatility of FT.
Asunto(s)
Flores/crecimiento & desarrollo , Regulación de la Expresión Génica de las Plantas , Cebollas/metabolismo , Proteínas de Plantas/metabolismo , Secuencia de Aminoácidos , Flores/genética , Flores/metabolismo , Regulación del Desarrollo de la Expresión Génica , Datos de Secuencia Molecular , Cebollas/genética , Cebollas/crecimiento & desarrollo , Filogenia , Proteínas de Plantas/química , Proteínas de Plantas/genética , Plantas/química , Plantas/clasificación , Plantas/genética , Estaciones del Año , Alineación de Secuencia , TemperaturaRESUMEN
BACKGROUND: Although modern sequencing technologies permit the ready detection of numerous DNA sequence variants in any organisms, converting such information to PCR-based genetic markers is hampered by a lack of simple, scalable tools. Onion is an example of an under-researched crop with a complex, heterozygous genome where genome-based research has previously been hindered by limited sequence resources and genetic markers. RESULTS: We report the development of generic tools for large-scale web-based PCR-based marker design in the Galaxy bioinformatics framework, and their application for development of next-generation genetics resources in a wide cross of bulb onion (Allium cepa L.). Transcriptome sequence resources were developed for the homozygous doubled-haploid bulb onion line 'CUDH2150' and the genetically distant Indian landrace 'Nasik Red', using 454™ sequencing of normalised cDNA libraries of leaf and shoot. Read mapping of 'Nasik Red' reads onto 'CUDH2150' assemblies revealed 16836 indel and SNP polymorphisms that were mined for portable PCR-based marker development. Tools for detection of restriction polymorphisms and primer set design were developed in BioPython and adapted for use in the Galaxy workflow environment, enabling large-scale and targeted assay design. Using PCR-based markers designed with these tools, a framework genetic linkage map of over 800cM spanning all chromosomes was developed in a subset of 93 F(2) progeny from a very large F(2) family developed from the 'Nasik Red' x 'CUDH2150' inter-cross. The utility of tools and genetic resources developed was tested by designing markers to transcription factor-like polymorphic sequences. Bin mapping these markers using a subset of 10 progeny confirmed the ability to place markers within 10 cM bins, enabling increased efficiency in marker assignment and targeted map refinement. The major genetic loci conditioning red bulb colour (R) and fructan content (Frc) were located on this map by QTL analysis. CONCLUSIONS: The generic tools developed for the Galaxy environment enable rapid development of sets of PCR assays targeting sequence variants identified from Illumina and 454 sequence data. They enable non-specialist users to validate and exploit large volumes of next-generation sequence data using basic equipment.
Asunto(s)
Cromosomas de las Plantas , Ligamiento Genético , Genoma de Planta , Cebollas/genética , Hojas de la Planta/genética , Brotes de la Planta/genética , Sitios de Carácter Cuantitativo , Programas Informáticos , Mapeo Cromosómico , Biblioteca de Genes , Marcadores Genéticos , Haploidia , Secuenciación de Nucleótidos de Alto Rendimiento , Homocigoto , Mutación INDEL , Repeticiones de Microsatélite , Reacción en Cadena de la Polimerasa , Polimorfismo de Nucleótido Simple , TranscriptomaRESUMEN
BACKGROUND: Vegetables of the genus Allium are widely consumed but remain poorly understood genetically. Genetic mapping has been conducted in intraspecific crosses of onion (Allium cepa L.), A. fistulosum and interspecific crosses between A. roylei and these two species, but it has not been possible to access genetic maps and underlying data from these studies easily. DESCRIPTION: An online comparative genomics database, AlliumMap, has been developed based on the GMOD CMap tool at http://alliumgenetics.org. It has been populated with curated data linking genetic maps with underlying markers and sequence data from multiple studies. It includes data from multiple onion mapping populations as well as the most closely related species A. roylei and A. fistulosum. Further onion EST-derived markers were evaluated in the A. cepa x A. roylei interspecific population, enabling merging of the AFLP-based maps. In addition, data concerning markers assigned in multiple studies to the Allium physical map using A. cepa-A. fistulosum alien monosomic addition lines have been compiled. The compiled data reveal extensive synteny between onion and A. fistulosum. CONCLUSIONS: The database provides the first online resource providing genetic map and marker data from multiple Allium species and populations. The additional markers placed on the interspecific Allium map confirm the value of A. roylei as a valuable bridge between the genetics of onion and A. fistulosum and as a means to conduct efficient mapping of expressed sequence markers in Allium. The data presented suggest that comparative approaches will be valuable for genetic and genomic studies of onion and A. fistulosum. This online resource will provide a valuable means to integrate genetic and sequence-based explorations of Allium genomes.
Asunto(s)
Agricultura , Allium/crecimiento & desarrollo , Allium/genética , Bases de Datos Genéticas , Genómica , Verduras/crecimiento & desarrollo , Verduras/genética , Mapeo Cromosómico , Cromosomas de las Plantas/genética , Cruzamientos Genéticos , Cartilla de ADN/metabolismo , Sitios Genéticos/genética , Reacción en Cadena de la Polimerasa , Especificidad de la EspecieRESUMEN
Fluorophore-assisted carbohydrate electrophoresis (FACE) is an analytical method for characterizing carbohydrate chain length that has been applied to neutral, charged, and N-linked oligosaccharides and that has been implemented using diverse separation platforms, including polyacrylamide gel electrophoresis and capillary electrophoresis. In this article, we describe three substantial improvements to FACE: (i) reducing the amount of starch and APTS required in labeling reactions and systematically analyzing the effect of altering the starch and 8-amino-1,3,6-pyrenetrisulfonic acid (APTS) concentrations on the reproducibility of the FACE peak area distributions; (ii) implementing FACE on a multiple capillary DNA sequencer (an ABI 3130xl), enabling higher throughput than is possible on other separation platforms; and (iii) developing a protocol for producing quantitative output of peak heights and areas using genetic marker analysis software. The results of a designed experiment to determine the effect of decreasing both the starch and fluorophore concentrations on the sensitivity and reproducibility of FACE electrophoregrams are presented. Analysis of the peak area distributions of the FACE electrophoregrams identified the labeling reaction conditions that resulted in the smallest variances in the peak area distributions while retaining strong fluorescence signals from the capillary-based DNA sequencer.
Asunto(s)
Electroforesis Capilar/métodos , Colorantes Fluorescentes/química , Almidón/química , Animales , Conformación de Carbohidratos , Distribución de Chi-Cuadrado , Reproducibilidad de los Resultados , Análisis de Secuencia de ADN/instrumentación , Coloración y EtiquetadoRESUMEN
BACKGROUND: Arabidopsis thaliana is a useful model organism for deciphering the genetic determinants of seed size; however the small size of its seeds makes measurements difficult. Bulk seed weights are often used as an indicator of average seed size, but details of individual seed is obscured. Analysis of seed images is possible but issues arise from variations in seed pigmentation and shadowing making analysis laborious. We therefore investigated the use of a consumer level scanner to facilitate seed size measurements in conjunction with open source image-processing software. RESULTS: By using the transmitted light from the slide scanning function of a flatbed scanner and particle analysis of the resulting images, we have developed a method for the rapid and high throughput analysis of seed size and seed size distribution. The technical variation due to the approach was negligible enabling us to identify aspects of maternal plant growth that contribute to biological variation in seed size. By controlling for these factors, differences in seed size caused by altered parental genome dosage and mutation were easily detected. The method has high reproducibility and sensitivity, such that a mutant with a 10% reduction in seed size was identified in a screen of endosperm-expressed genes. Our study also generated average seed size data for 91 Arabidopsis accessions and identified a number of quantitative trait loci from two recombinant inbred line populations, generated from Cape Verde Islands and Burren accessions crossed with Columbia. CONCLUSIONS: This study describes a sensitive, high-throughput approach for measuring seed size and seed size distribution. The method provides a low cost and robust solution that can be easily implemented into the workflow of studies relating to various aspects of seed development.
RESUMEN
Disease resistance is an important objective of global potato breeding programmes. The use of resistant cultivars is a significant tool for disease management. Recent advances in plant molecular genetics have identified several genes for resistance to potato diseases from within the germplasm pool available to potato breeders. Antimicrobial peptides, such as Snakin-1 (StSN1) and Snakin-2 (StSN2), have been isolated recently from potato tubers. Overexpression of the StSNI and StSN2 genes in potato is known to provide broad spectrum activity against a wide range of bacterial and fungal pathogens. We describe the use of intragenic gene transfer technology towards disease resistance in potatoes. An expression cassette was constructed with the 5' promoter and 3' terminator regions of a potato gene encoding a chlorophyll a/b binding protein (StLhca3). The coding regions of the StSN1 and StSN2 genes of potato were cloned individually between these regulatory regions. The resulting Lhca3-StSNi-Lhca3 and Lhca3-StSN2-Lhco3 chimeric genes were individually cloned into a potato-derived T-DNA-like region for potato transformation. Potato cultivar Iwa was co-cultivated with Agrobocterium harbouring intragenic binary vectors with the StSN1 and StSN2 genes. Regenerated potato plants were screened using PCR to identify lines transformed with the disease resistance genes without the presence of foreign DNA.
Asunto(s)
Inmunidad Innata/genética , Enfermedades de las Plantas/genética , Solanum tuberosum/genética , Secuencia de Bases , Cartilla de ADN , ADN de Plantas/genética , ADN de Plantas/aislamiento & purificación , Vectores Genéticos , Intrones/genética , Datos de Secuencia Molecular , Enfermedades de las Plantas/prevención & control , Proteínas de Plantas/análisis , Proteínas de Plantas/genética , Brotes de la Planta/genética , Reacción en Cadena de la Polimerasa , Regiones Terminadoras GenéticasRESUMEN
BACKGROUND: Simple Sequence Repeat (SSR) or microsatellite markers are valuable for genetic research. Experimental methods to develop SSR markers are laborious, time consuming and expensive. In silico approaches have become a practicable and relatively inexpensive alternative during the last decade, although testing putative SSR markers still is time consuming and expensive. In many species only a relatively small percentage of SSR markers turn out to be polymorphic. This is particularly true for markers derived from expressed sequence tags (ESTs). In EST databases a large redundancy of sequences is present, which may contain information on length-polymorphisms in the SSR they contain, and whether they have been derived from heterozygotes or from different genotypes. Up to now, although a number of programs have been developed to identify SSRs in EST sequences, no software can detect putatively polymorphic SSRs. RESULTS: We have developed PolySSR, a new pipeline to identify polymorphic SSRs rather than just SSRs. Sequence information is obtained from public EST databases derived from heterozygous individuals and/or at least two different genotypes. The pipeline includes PCR-primer design for the putatively polymorphic SSR markers, taking into account Single Nucleotide Polymorphisms (SNPs) in the flanking regions, thereby improving the success rate of the potential markers. A large number of polymorphic SSRs were identified using publicly available EST sequences of potato, tomato, rice, Arabidopsis, Brassica and chicken.The SSRs obtained were divided into long and short based on the number of times the motif was repeated. Surprisingly, the frequency of polymorphic SSRs was much higher in the short SSRs. CONCLUSION: PolySSR is a very effective tool to identify polymorphic SSRs. Using PolySSR, several hundred putative markers were developed and stored in a searchable database. Validation experiments showed that almost all markers that were indicated as putatively polymorphic by polySSR were indeed polymorphic. This greatly improves the efficiency of marker development, especially in species where there are low levels of polymorphism, like tomato. When combined with the new sequencing technologies PolySSR will have a big impact on the development of polymorphic SSRs in any species.PolySSR and the polymorphic SSR marker database are available from http://www.bioinformatics.nl/tools/polyssr/.