Effect of air pollution-controlled residue of a sewage sludge incinerator on the drying shrinkage and the pore structure of alkali-activated materials.

Recycling air pollution-controlled residues (APCR) generated from sewage sludge incinerators can be used for waste management, but the leaching of potentially toxic heavy metals from APCR poses environmental and human health issues. The present paper describes a procedure using APCR to produce alkali-activated materials and thereby realize their disposal. The effect of APCR on the compressive strength and drying shrinkage of the alkali-activated slag/glass powder was investigated. The pore structure characteristics were analyzed for clarifying its relationship with drying shrinkage. The results indicated that the drying shrinkage of the alkali-activated material was related to the mesopore volume. The drying shrinkage was slightly increased after the incorporation of the 10 % APCR, which was likely attributed to the high volume of mesopores compared to the 20 % APCR that lowered the drying shrinkage and compressive strength. This decrease in drying shrinkage was due to the recrystallization of sodium sulfate in the pore solution that can act as expansive agents and aggregates. The growth stress of the crystalline sodium sulfate within the matrix can offset the tension stress caused by the water loss. In addition, leaching studies using the SW-846 Method 1311 showed that recycling APCR into the alkali-activated system did not present a toxicity leaching risk or release unacceptable concentrations of heavy metals. The incorporation of waste APCR and waste glass can make AAMs a very promising and safe environmental technology.

Advances in the use of recycled non-ferrous slag as a resource for non-ferrous metal mine site remediation.

The growing global demand for non-ferrous metals has led to serious environmental issues involving uncovered mine site slag dumps that threaten the surrounding soils, surface waters, groundwater, and the atmosphere. Remediation of these slags using substitute cement materials for ordinary Portland cement (OPC) and precursors for alkali-activated materials (AAMs) can convert hazardous solid wastes into valuable construction materials, as well as to attain the desired solidification and stabilization (S/S) of heavy metal(loid)s (HM). This review discusses the current research on the effect of non-ferrous slags on the reaction mechanisms of the OPC and AAM. The S/S of HM from the non-ferrous slags in AAM and OPC is also reviewed. HM can be stabilized in these materials based on the complex salt effect and isomorphic effects. The major challenges faced in AAMs and OPC for HM stabilization include the long-term durability of the matrix (e.g., sulfate attack, stability of volume). The existing knowledge gaps and future trends for the sustainable application of non-ferrous slags are also discussed.