RESUMEN
A series of iron(II) complexes with the general formula [FeII(L2-Qn)(L)]n+ (n = 1, L = F-, Cl-; n = 2, L = NCMe, H2O) have been isolated and characterized. The X-ray crystallographic data reveals that metal-ligand bond distances vary with varying ligand field strengths of the sixth ligand. While the complexes with fluoride, chloride and water as axial ligand are high spin, the acetonitrile-coordinated complex is in a mixed spin state. The steric bulk of the quinoline moieties forces the axial ligands to deviate from the Fe-Naxial axis. A higher deviation/tilt is noted for the high spin complexes, while the acetonitrile coordinated complex displays least deviation. This deviation from linearity is slightly less in the analogous low-spin iron(II) complex [FeII(L1-Qn)(NCMe)]2+ of the related asymmetric ligand L1-Qn due to the presence of only one sterically demanding quinoline moiety. The two iron(II)-acetonitrile complexes [FeII(L2-Qn)(NCMe)]2+ and [FeII(L1-Qn)(NCMe)]2+ generate the corresponding iron(IV)-oxo species with higher thermal stability of the species supported by the L1-Qn ligand. The crystallographic and spectroscopic data for [FeIV(O)(L1-Qn)](ClO4)2 bear resemblance to other crystallographically characterized S = 1 iron(IV)-oxo complexes. The hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactivities of both the iron(IV)-oxo complexes were investigated, and a Box-Behnken multivariate optimization of the parameters for catalytic oxidation of cyclohexane by [FeII(L2-Qn)(NCMe)]2+ using hydrogen peroxide as the terminal oxidant is presented. An increase in the average Fe-N bond length in [FeII(L1-Qn)(NCMe)]2+ is also manifested in higher HAT and OAT rates relative to the other reported complexes of ligands based on the N4Py framework. The results reported here confirm that the steric influence of the ligand environment is of critical importance for the reactivity of iron(IV)-oxo complexes, but additional electronic factors must influence the reactivity of iron-oxo complexes of N4Py derivatives.
RESUMEN
Oxidative C-C bond cleavage of 2-aminophenols mediated by transition metals and dioxygen is a topic of great interest. While the oxygenolytic C-C bond cleavage reaction relies on the inherent redox non-innocent property of 2-aminophenols, the metal complexes of 2-aminophenolates often undergo 1e-/2e- oxidation events (metal or ligand oxidation), instead of the direct addition of O2 for subsequent C-C bond cleavage. In this work, we report the isolation, characterization and dioxygen reactivity of a series of ternary iron(ii)-2-aminophenolate complexes [(TpPh,Me)FeII(X)], where X = 2-amino-4-tert-butylphenolate (4-tBu-HAP) (1); X = 2-amino-4,6-di-tert-butylphenolate (4,6-di-tBu-HAP) (2); X = 2-amino-4-nitrophenolate (4-NO2-HAP)(3); and X = 2-anilino-4,6-di-tert-butylphenolate (NH-Ph-4,6-di-tBu-HAP) (4) supported by a facial tridentate nitrogen donor ligand (TpPh,Me = hydrotris(3-phenyl-5-methylpyrazol-1-yl)borate). Another facial N3 ligand (TpPh2 = hydrotris(3,5-diphenyl-pyrazol-1-yl)borate) has been used to isolate an iron(ii)-2-anilino-4,6-di-tert-butylphenolate complex (5) for comparison. Both [(TpPh,Me)FeII(4-tBu-HAP)] (1) and [(TpPh,Me)FeII(4,6-di-tBu-HAP)] (2) undergo regioselective oxidative aromatic ring fission reaction of the coordinated 2-aminophenols to the corresponding 2-picolinic acids in the reaction with dioxygen. In contrast, complex [(TpPh,Me)FeII(4-NO2-HAP)] (3) displays metal based oxidation to form an iron(iii)-2-amidophenolate complex. Complexes [(TpPh,Me)FeII(NH-Ph-4,6-di-tBu-HAP)] (4) and [(TpPh2)FeII(NH-Ph-4,6-di-tBu-HAP)] (5) react with dioxygen to undergo 2e- oxidation with the formation of the corresponding iron(iii)-2-iminobenzosemiquinonato radical species implicating the importance of the -NH2 group in directing the C-C bond cleavage reactivity of 2-aminophenols. The systematic study presented in this work unravels the effect of the electronic and structural properties of the redox non-innocent 2-aminophenolate ring and the supporting ligand on the C-C bond cleavage reactivity vs. the metal/ligand oxidation of the complexes. The study further reveals that proper modulation of the stereoelectronic factors enables us to design a well synchronised proton transfer (PT) and dioxygen binding events for complexes 1 and 2 that mimic the structure and function of the nonheme enzyme 2-aminophenol-1,6-dioxygenase (APD).
RESUMEN
Two monoanionic nickel complexes Bu4N[Ni(LSeO)2] (1) and Bu4N[Ni(LSO)2] (2) (H2LSeO = 3,5-di-tert-butyl-2-hydroxyselenophenol and H2LSO = 3,5-di-tert-butyl-2-hydroxythiophenol) were synthesised by reductive cleavage of the respective 2,2'-dichalcogenobis(4,6-di-tert-butylphenol) (H2LX-X; X = Se, S) with nickel(ii) salts. The crystal structures of 1 and 2 confirm the reductive X-X bond cleavage with the concomitant formation of the corresponding monoanionic square planar complex, where quinoidal distortions of the aromatic rings are observed. The monoanionic complexes (1 and 2) are paramagnetic (S = 1/2), exhibiting rhombic EPR signals, and the g anisotropies are well correlated with the spin-orbit coupling of chalcogenides. The spectral data indicate that the ligands H2LXO in 1 and 2 are redox non-innocent and stabilise the square planar S = 1/2 nickel complexes with a highly delocalised unpaired electron. DFT calculations further support the delocalised electronic structures of the nickel complexes.
RESUMEN
The influence of supporting ligands and co-ligands on the dioxygen reactivity of a series of iron(ii) complexes, [(6-Me3-TPA)FeII(GN-H)]+ (1), [(6-Me3-TPA)FeII(DHN-H)]+ (1a), [(BPMEN)FeII(GN-H)]+ (2), [(BPMEN)FeII(DHN-H)]+ (2a), [(TBimA)FeII(GN-H)]+ (3), and [(TBimA)FeII(DHN-H)]+ (3a) (GN-H2 = 2,5-dihydroxybenzoic acid and DHN-H2 = 1,4-dihydroxy-2-naphthoic acid) of N4 ligands, is presented. The iron(ii)-gentisate complexes react with dioxygen to afford the corresponding iron(iii) species. On the contrary, DHN-H undergoes oxidative C-C coupling to form [2,2'-binaphthalene]-1,1',4,4'-tetrone 3-hydroxy-3'-carboxylic acid (BNTHC) on 1a, and [2,2'-binaphthalene]-1,1',4,4'-tetrone 3,3'-dicarboxylic acid (BNTD) on 2a and 3a. In each case, the reaction proceeds through an iron(iii)-DHN species. The X-ray single crystal structures of [(6-Me3-TPA)FeII(BNTD)] (1Ox) and [(BPMEN)FeII(BNTD)] (2Ox) confirm the coupling of two DHN-H molecules. The formation of iron(iii) product without any coupling of co-ligand from the complexes, [(BPMEN)FeII(HNA)]+ (2b) and [(BPMEN)FeII(5-OMeSA)]+ (2c) (HNA = 1-hydroxy-2-naphthoate, 5-OMeSA = 5-methoxysalicylate) confirms the importance of para-hydroxy group for the coupling reaction. The unusual coupling of DHN-H by the iron(ii) complexes of the neutral N4 ligands is distinctly different from the oxygenolytic aromatic C-C cleavage of DHN by the iron(ii) complex of a facial N3 ligand.
RESUMEN
The oxomanganese(IV) complex [(dpaq)MnIV(O)]+-Mn+ (1-Mn+, Mn+ = redox-inactive metal ion, H-dpaq = 2-[bis(pyridin-2-ylmethyl)]amino-N-quinolin-8-ylacetamide), generated in the reaction of the precursor hydroxomanganese(III) complex 1 with iodosylbenzene (PhIO) in the presence of redox-inactive metal triflates, has recently been reported. Herein the generation of the same oxomanganese(IV) species from 1 using various combinations of protic acids and oxidants at 293 K is reported. The reaction of 1 with triflic acid and the one-electron-oxidizing agent [RuIII(bpy)3]3+ leads to the formation of the oxomanganese(IV) complex. The putative species has been identified as a mononuclear high-spin (S = 3/2) nonheme oxomanganese(IV) complex (1-O) on the basis of mass spectrometry, Raman spectroscopy, EPR spectroscopy, and DFT studies. The optical absorption spectrum is well reproduced by theoretical calculations on an S = 3/2 ground spin state of the complex. Isotope labeling studies confirm that the oxygen atom in the oxomanganese(IV) complex originates from the MnIII-OH precursor and not from water. A mechanistic investigation reveals an initial protonation step forming the MnIII-OH2 complex, which then undergoes one-electron oxidation and subsequent deprotonations to form the oxomanganese(IV) transient, avoiding the requirements of either oxo-transfer agents or redox-inactive metal ions. The MnIV-oxo complex cleaves the C-H bonds of xanthene (k2 = 5.5 M-1 s-1), 9,10-DHA (k2 = 3.9 M-1 s-1), 1,4-CHD (k2 = 0.25 M-1 s-1), and fluorene (k2 = 0.11 M-1 s-1) at 293 K. The electrophilic character of the nonheme MnIV-oxo complex is demonstrated by a large negative ρ value of 2.5 in the oxidation of para-substituted thioanisoles. The complex emerges as the "most reactive" among the existing MnIV/V-oxo complexes bearing anionic ligands.
RESUMEN
The reactivity of a mononuclear high-spin iron(III)-alkylperoxo intermediate [FeIII (t-BuLUrea )(OOCm)(OH2 )]2+ (2), generated from [FeII (t-BuLUrea )(H2 O)(OTf)](OTf) (1) [t-BuLUrea =1,1'-(((pyridin-2-ylmethyl)azanediyl)bis(ethane-2,1-diyl))bis(3-(tert-butyl)urea), OTf=trifluoromethanesulfonate] with cumyl hydroperoxide (CmOOH), toward the C-H and C=C bonds of hydrocarbons is reported. 2 oxygenates the strong C-H bonds of aliphatic substrates with high chemo- and stereoselectivity in the presence of 2,6-lutidine. While 2 itself is a sluggish oxidant, 2,6-lutidine assists the heterolytic O-O bond cleavage of the metal-bound alkylperoxo, giving rise to a reactive metal-based oxidant. The roles of the urea groups on the supporting ligand, and of the base, in directing the selective and catalytic oxygenation of hydrocarbon substrates by 2 are discussed.
RESUMEN
The synthesis, characterization and reactivity studies of iron(ii) complexes [FeII(PySH)4](OTf)2, 1-(OTf)2, [FeII(PySH)4](ClO)4, 1-(ClO4)2, and [FeII(PyS)2]n, (2), of a 2-mercaptopyridine (PySH) ligand are discussed. The X-ray crystal structures of both 1-(OTf)2 and 1-(ClO4)2 reveal a distorted tetrahedral geometry at the iron(ii) center with identical constituents. All the pyridine nitrogen atoms are protonated and thiolate ions are coordinated to the iron(ii) center. The structure and function of complex 1-(OTf)2 or 1-(ClO4)2 resembles the active site of rubredoxin. Complex 2 has octahedral geometry at the iron(ii) center forming a 1-D coordination polymer. Complex 1-(OTf)2 exhibits a high positive redox potential (E1/2 = 0.23 V vs. Ag/AgCl) which reduces to -0.12 V in the presence of triethylamine under an inert atmosphere. This change of the redox potential is highly reversible in the presence of a weak acid such as p-toluenesulfonic acid, pTsOH. DFT studies show that the complex cation [FeII(PySH)4]2+ upon treatment with a base converts to its anionic congener, [FeII(PyS)4]2-, via the deprotonation of the pyridinium moiety. The iron(ii) complexes readily react with molecular oxygen to yield the corresponding iron(iii) complex, which rapidly decays to form pyridine disulphide (Py2S2) and an iron(ii) complex.
RESUMEN
2-Aminophenol appended pentadentate ligand H2GanAP was synthesized by mixing equimolar amounts of 2-[bis(2-pyridylmethyl)aminomethyl]aniline (A) and 3,5-di-tert-butyl catechol in hexane in the presence of Et3N under air. The ligand reacted with Fe(ClO4)2·6H2O or Fe(ClO4)3·6H2O in the presence of tetrabutylammonium perchlorate, and Et3N under air and provided a µ2 oxo-bridged dinuclear iron complex (1). X-ray single-crystal analysis of complex 1 revealed the presence of a furan derivative, resulting from the oxidative aromatic C-C bond cleavage product of 2-aminophenol derivative, in the coordination sphere of each iron center. Mechanistic investigation for the formation of complex 1 established that in the absence of molecular oxygen no oxidation of the appended 2-amidophenolate unit took place. An iron(III)-amidophenolate complex, formed initially, further reacted with molecular oxygen and caused oxidative aromatic C-C bond cleavage via a putative alkylperoxo species.