Automatic Assessment of Ultrasound Curvature Angle for Scoliosis Detection Using 3-D Ultrasound Volume Projection Imaging.

OBJECTIVE: Scoliosis is a spinal deformation in which the spine takes a lateral curvature, generating an angle in the coronal plane. The conventional method for detecting scoliosis is measurement of the Cobb angle in spine images obtained by anterior X-ray scanning. Ultrasound imaging of the spine is found to be less ionising than traditional radiographic modalities. For posterior ultrasound scanning, alternate indices of the spinous process angle (SPA) and ultrasound curve angle (UCA) were developed and have proven comparable to those of the traditional Cobb angle. In SPA, the measurements are made using the spinous processes as an anatomical reference, leading to an underestimation of the traditionally used Cobb angles. Alternatively, in UCA, more lateral features of the spine are employed for measurement of the main thoracic and thoracolumbar angles; however, clear identification of bony features is required. The current practice of UCA angle measurement is manual. This research attempts to automate the process so that the errors related to human intervention can be avoided and the scalability of ultrasound scoliosis diagnosis can be improved. The key objective is to develop an automatic scoliosis diagnosis system using 3-D ultrasound imaging. METHODS: The novel diagnosis system is a three-step process: (i) finding the ultrasound spine image with the most visible lateral features using the convolutional RankNet algorithm; (ii) segmenting the bony features from the noisy ultrasound images using joint spine segmentation and noise removal; and (iii) calculating the UCA automatically using a newly developed centroid pairing and inscribed rectangle slope method. RESULTS: The proposed method was evaluated on 109 patients with scoliosis of different severity. The results obtained had a good correlation with manually measured UCAs (R2=0.9784 for the main thoracic angle andR2=0.9671 for the thoracolumbar angle) and a clinically acceptable mean absolute difference of the main thoracic angle (2.82 ± 2.67°) and thoracolumbar angle (3.34 ± 2.83°). CONCLUSION: The proposed method establishes a very promising approach for enabling the applications of economic 3-D ultrasound volume projection imaging for mass screening of scoliosis.

Landmark Localization From Medical Images With Generative Distribution Prior.

In medical image analysis, anatomical landmarks usually contain strong prior knowledge of their structural information. In this paper, we propose to promote medical landmark localization by modeling the underlying landmark distribution via normalizing flows. Specifically, we introduce the flow-based landmark distribution prior as a learnable objective function into a regression-based landmark localization framework. Moreover, we employ an integral operation to make the mapping from heatmaps to coordinates differentiable to further enhance heatmap-based localization with the learned distribution prior. Our proposed Normalizing Flow-based Distribution Prior (NFDP) employs a straightforward backbone and non-problem-tailored architecture (i.e., ResNet18), which delivers high-fidelity outputs across three X-ray-based landmark localization datasets. Remarkably, the proposed NFDP can do the job with minimal additional computational burden as the normalizing flows module is detached from the framework on inferencing. As compared to existing techniques, our proposed NFDP provides a superior balance between prediction accuracy and inference speed, making it a highly efficient and effective approach. The source code of this paper is available at https://github.com/jacksonhzx95/NFDP.

Joint Spine Segmentation and Noise Removal From Ultrasound Volume Projection Images With Selective Feature Sharing.

Volume Projection Imaging from ultrasound data is a promising technique to visualize spine features and diagnose Adolescent Idiopathic Scoliosis. In this paper, we present a novel multi-task framework to reduce the scan noise in volume projection images and to segment different spine features simultaneously, which provides an appealing alternative for intelligent scoliosis assessment in clinical applications. Our proposed framework consists of two streams: i) A noise removal stream based on generative adversarial networks, which aims to achieve effective scan noise removal in a weakly-supervised manner, i.e., without paired noisy-clean samples for learning; ii) A spine segmentation stream, which aims to predict accurate bone masks. To establish the interaction between these two tasks, we propose a selective feature-sharing strategy to transfer only the beneficial features, while filtering out the useless or harmful information. We evaluate our proposed framework on both scan noise removal and spine segmentation tasks. The experimental results demonstrate that our proposed method achieves promising performance on both tasks, which provides an appealing approach to facilitating clinical diagnosis.

Dual-task ultrasound spine transverse vertebrae segmentation network with contour regularization.

3D ultrasound imaging has become one of the common diagnosis ways to assess scoliosis since it is radiation-free, real-time, and low-cost. Spine curvature angle measurement is an important step to assess scoliosis precisely. One way to calculate the angle is using the vertebrae features of the 2-D coronal images to identify the most tilted vertebrae. To do the measurement, the segmentation of the transverse vertebrae is an important step. In this paper, we propose a dual-task ultrasound transverse vertebrae segmentation network (D-TVNet) based on U-Net. First, we arrange an auxiliary shape regularization network to learn the contour segmentation of the bones. It improves the boundary segmentation and anti-interference ability of the U-Net by fusing some of the features of the auxiliary task and the main task. Then, we introduce the atrous spatial pyramid pooling (ASPP) module to the end of the down-sampling stage of the main task stream to improve the relative feature extraction ability. To further improve the boundary segmentation, we extendedly fuse the down-sampling output features of the auxiliary network in the ASPP. The experiment results show that the proposed D-TVNet achieves the best dice score of 86.68% and the mean dice score of 86.17% based on cross-validation, which is an improvement of 5.17% over the baseline U-Net. An automatic ultrasound spine bone segmentation network with promising results has been achieved.

Automatic Segmentation of 3D Ultrasound Spine Curvature Using Convolutional Neural Network.

Scoliosis is a 3D spinal deformation where the spine takes a lateral curvature, which generates an angle in a coronal plane. For periodic detection of scoliosis, safe and economic imaging modality is needed as continuous exposure to radiative imaging may cause cancer. 3D ultrasound imaging is a cost-effective and radiation-free imaging modality which gives volume projection image. Identification of mid-spine line using manual, semi-automatic and automatic methods have been published. Still, there are some difficulties like variations in human measurement, slow processing of data associated with them. In this paper, we propose an unsupervised ground truth generation and automatic spine curvature segmentation using U- Net. This approach of the application of Convolutional Neural Network on ultrasound spine image, to perform automatic detection of scoliosis, is a novel one.

3D Ultrasound Spine Image Selection Using Convolution Learning-to-Rank Algorithm.

3D Ultrasound imaging has become an important means of scoliosis assessment as it is a real-time, cost-effective and radiation-free imaging technique. However, the coronal images from different depths of a 3D ultrasound image have different imaging definitions. So there is a need to select the coronal image that would give the best image definition. Also, manual selection of coronal images is time-consuming and limited to the discretion and capability of the assessor. Therefore, in this paper, we have developed a convolution learning-to-rank algorithm to select the best ultrasound images automatically using raw ultrasound images. The ranking is done based on the curve angle of the spinal cord. Firstly, we approached the image selection problem as a ranking problem; ranked based on probability of an image to be a good image. Here, we use the RankNet, a pairwise learning-to-rank method, to rank the images automatically. Secondly, we replaced the backbone of the RankNet, which is the traditional artificial neural network (ANN), with convolution neural network (CNN) to improve the feature extracting ability for the successive iterations. The experimental result shows that the proposed convolutional RankNet achieves the perfect accuracy of 100% while conventional DenseNet achieved 35% only. This proves that the convolutional RankNet is more suitable to highlight the best quality of ultrasound image from multiple mediocre ones.

Lung Nodule Classification using A Novel Two-stage Convolutional Neural Networks Structure'.

Lung cancer is one of the most fatal cancers in the world. If the lung cancer can be diagnosed at an early stage, the survival rate of patients post treatment increases dramatically. Computed Tomography (CT) diagram is an effective tool to detect lung cancer. In this paper, we proposed a novel two-stage convolution neural network (2S-CNN) to classify the lung CT images. The structure is composed of two CNNs. The first CNN is a basic CNN, whose function is to refine the input CT images to extract the ambiguous CT images. The output of first CNN is fed into another inception CNN, a simplified version of GoogLeNet, to enhance the better recognition on complex CT images. The experimental results show that our 2S-CNN structure has achieved an accuracy of 89.6%.

An ergonomics study on the evaluation of carpal tunnel syndrome among Chikan embroidery workers of West Bengal, India.

BACKGROUND: Chikan embroidery is a popular handicraft in India that involves hand-intensive stitching while seated in a static posture with the upper back curved and the head bent over the fabric. Women perform most Chikan embroidery. OBJECTIVES: The aim of this study was to analyze the repetitive nature of this work among female Chikan embroiderers by measuring the prevalence of upper extremity discomfort and carpal tunnel syndrome (CTS). METHODS: The Nordic musculoskeletal questionnaire was used to analyze the extent of upper extremity pain symptomology. The repetitive nature of Chikan embroidery work was evaluated using the Assessment of Repetitive Tasks of the upper limbs tool (ART). Motor nerve conduction studies of median and ulnar nerves were performed with embroidery workers and a control group to determine the risk of CTS. RESULTS: Among embroidery workers, the prevalence of wrist pain was 68% and forearm pain was 60%. The embroiderers also commonly reported Tingling and numbness in the hands and fingertips. The ART analysis found that Chikan embroidery is a highly repetitive task and nerve conduction studies showed that the embroidery workers were more likely to experience CTS than women in the control group. CONCLUSIONS: Chikan embroidery is a hand-intensive occupation involving repetitive use of hands and wrists and this study population is at risk of experiencing CTS. Future research should explore the potential benefits of ergonomics measures including incorporating breaks, stretching exercises, and the use of wrist splints to reduce repetitive strain and the probability of developing CTS.