Proton Conducting Metal-Organic Frameworks (MOFs) via Post Synthetic Transmetallation and Water Induced Structural Transformations.

Post Synthetic Modification (PSM) of Metal-Organic Frameworks (MOFs) is a crucial strategy for developing new MOFs with enhanced functional properties compared to their parent one. PSM can be accomplished through various methods:1) modification of organic linkers; 2) exchange of metal ions or nodes; and 3) inclusion or exchange of solvent/guest molecules. Herein, PSM of bimetallic and monometallic MOFs containing biphenyl dinitro-tetra-carboxylates (NCA) are demonstrated. The tetra carboxylate NCA, produces monometallic Cd-MOF-1 and Cu-MOF-1 and bimetallic CoZn-MOF in solvothermal reactions with the corresponding metal salts. The CoZn-MOF undergoes post-synthetic transmetallation with Cd(NO3)2 and Cu(NO3)2 in aqueous solution to yield Cd-MOF-2 and Cu-MOF-2, respectively. Additionally, green crystals of Cu-MOF-1 found to undergo a single-crystal-to-single-crystal (SCSC) transformation to blue crystals of Cu-MOF-3 upon dipped into water at room temperature. These MOFs demonstrate notable proton conductivities ranging from 10-3 to 10-4 S cm-1 under variable temperatures and humidity levels. Among them, Cu-MOF-3 achieves the highest proton conductivity of 1.36 × 10-3 S cm-1 at 90 °C and 98% relative humidity, attributed to its continuous and extensive hydrogen bonding network, which provides effective proton conduction pathways within the MOF. This work highlights a convenient strategy for designing proton-conducting MOFs via post-synthetic modification.

Recent Progress in Sulfur-Containing High Refractive Index Polymers for Optical Applications.

The development in the field of high refractive index materials is a crucial factor for the advancement of optical devices with advanced features such as image sensors, optical data storage, antireflective coatings, light-emitting diodes, and nanoimprinting. Sulfur plays an important role in high refractive index applications owing to its high molar refraction compared to carbon. Sulfur exists in multiple oxidation states and can exhibit various stable functional groups. Over the last few decades, sulfur-containing polymers have attracted much attention owing to their wide array of applications governed by the functional group of sulfur present in the polymer repeat unit. The interplay of refractive index and various other polymer properties contributes to successfully implementing a specific polymer material in optical applications. The focus on developing optoelectronic devices induced an ever-increasing need to integrate different functional materials to achieve the devices' full potential. Several devices that see the potential use of sulfur in high refractive index materials are reviewed in the study. Like sulfur, selenium also exhibits high molar refraction and unique chemical properties, making it an essential field of study. This review covers the research and development in the field of sulfur and selenium in different forms of functionality, focusing on the chemistry of bonding and the optical properties of the polymers containing the heteroatoms mentioned above. The strategy and rationale behind incorporating heteroatoms in a polymer matrix to produce high-refractive-index materials are also described in the present review.

Sulfur-Rich Polyimide/TiO2 Hybrid Materials with a Tunable Refractive Index.

High refractive index (RI) polyimide/titania nanoparticle hybrid materials were synthesized and characterized in this study. The polyimide synthesis took place via the conventional polycondensation process following the preparation of poly(amic acid), and the nanoparticles were incorporated using an in situ sol-gel process. Thin films of the polyimide/titania nanoparticle hybrids were prepared by optimizing the coating conditions using a spin coater. Thermal imidization of the nanoparticle containing poly(amic acid) films on Si wafers was completed in a temperature-controlled drying oven under a N2 atmosphere. Fourier transform infrared spectroscopy revealed the successful formation of inorganic bonds as well as imide linkages, and transmission electron microscopy results show well-dispersed nanocrystalline TiO2 nanoparticles of around 5 nm in the polymer matrix. Thorough optimization of the reaction time and concentration of TiO2 precursors enabled to achieve a titania content as high as 30% (wt). The RI of the resultant hybrid materials was found to be tunable according to the titania content, while the RI increased linearly with increasing titania content. A homogeneous hybrid material with a very high RI of 1.84 at 589 nm was achieved in this work for 30% (wt) TiO2.

Fabrication of a Vitamin B12-Loaded Carbon Dot/Mixed-Ligand Metal Organic Framework Encapsulated within the Gelatin Microsphere for pH Sensing and In Vitro Wound Healing Assessment.

Bacterial invasion is a serious concern during the wound healing process. The colonization of bacteria is mainly responsible for the pH fluctuation at the wound site. Therefore, the fabrication of a proper wound dressing material with antibacterial activity and pH monitoring ability is necessary to acquire a fast healing process. Therefore, this work is dedicated to designing a vitamin B12-loaded gelatin microsphere (MS) decorated with a carbon dot (CD) metal-organic framework (MOF) for simultaneous pH sensing and advanced wound closure application. The resultant MS portrayed a high specific surface area and a hierarchically porous structure. Furthermore, the surface of the resultant MS contained numerous carboxyl groups and amine groups whose deprotonation and protonation with the pH alternation are accountable for the pH-sensitive properties. The vitamin B12 release study was speedy from the MOF structure in an acidic medium, which was checked by gelatin coating, and a controlled drug release behavior was observed. The system showed excellent cytocompatibility toward the L929 cell line and remarkable antibacterial performance against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Furthermore, the combined effect of Zn2+, the imidazole unit, and CDs produces an outstanding bactericidal effect on the injury sites. Finally, the in vitro wound model suggests that the presence of the vitamin B12-loaded gelatin MS accelerates the proliferation of resident fibroblast L929 cells and causes tissue regeneration in a time-dependent manner. The relative wound area, % of wound closure, and wound healing speed values are remarkable and suggest the requirement for assessing the response of the system before exploiting its prospective in vivo application.

A Tetradentate Phosphonate Ligand-based Ni-MOF as a Support for Designing High-performance Proton-conducting Materials.

Developing a robust metal-organic framework (MOF) which facilitates proton hopping along the pore channels is very demanding in the context of fabricating an efficient proton-conducting membrane for fuel cells. Herein, we report the synthesis of a novel tetradentate aromatic phosphonate ligand H8 L (L=tetraphenylethylene tetraphosphonic acid) based Ni-MOF, whose crystal structure has been solved from single-crystal X-ray diffraction. Ni-MOF [Ni2 (H4 L)(H2 O)9 (C2 H7 SO)(C2 H7 NCO)] displays a monoclinic crystal structure with a space group of P 21 /c, a=11.887 Å, b=34.148 Å, c=11.131 Å, α=γ=90°, ß=103.374°, where a nickel-hexahydrate moiety located inside the void space of the framework through several H-bonding interactions. Upon treatment of the Ni-MOF in different pH media as well as solvents, the framework remained unaltered, suggesting the presence of strong H-bonding interactions in the framework. High framework stability of Ni-MOF bearing H-bonding interactions motivated us to explore this metal-organic framework material as proton-conducting medium after external proton doping. Due to the presence of a large number of H-bonding interactions and the presence of water molecules in the framework we have carried out the doping of organic p-toluenesulfonic acid (PTSA) and inorganic sulphuric acid (SA) in this Ni-MOF and observed high proton conductivity of 5.28×10-2  S cm-1 at 90 °C and 98% relative humidity for the SA-doped material. Enhancement of proton conductivity by proton doping under humid conditions suggested a very promising feature of this Ni-MOF.

Carbon Dot Cross-Linked Gelatin Nanocomposite Hydrogel for pH-Sensing and pH-Responsive Drug Delivery.

Delivery of therapeutics to the intestinal region bypassing the harsh acidic environment of the stomach has long been a research focus. On the other hand, monitoring a system's pH during drug delivery is a crucial diagnosis factor as the activity and release rate of many therapeutics depend on it. This study answered both of these issues by fabricating a novel nanocomposite hydrogel for intestinal drug delivery and near-neutral pH sensing at the same time. Gelatin nanocomposites (GNCs) with varying concentrations of carbon dots (CDs) were fabricated through simple solvent casting methods. Here, CDs served a dual role and simultaneously acted as a cross-linker and chromophore, which reduced the usage of toxic cross-linkers. The proposed GNC hydrogel sample acted as an excellent pH sensor in the near-neutral pH range and could be useful for quantitative pH measurement. A model antibacterial drug (cefadroxil) was used for the in vitro drug release study at gastric pH (1.2) and intestinal pH (7.4) conditions. A moderate and sustained drug release profile was noticed at pH 7.4 in comparison to the acidic medium over a 24 h study. The drug release profile revealed that the pH of the release medium and the percentage of CDs cross-linking influenced the drug release rate. Release data were compared with different empirical equations for the evaluation of drug release kinetics and found good agreement with the Higuchi model. The antibacterial activity of cefadroxil was assessed by the broth microdilution method and found to be retained and not hindered by the drug entrapment procedure. The cell viability assay showed that all of the hydrogel samples, including the drug-loaded GNC hydrogel, offered acceptable cytocompatibility and nontoxicity. All of these observations illustrated that GNC hydrogel could act as an ideal pH-monitoring and oral drug delivery system in near-neutral pH at the same time.

Light-Driven Proton Transfer for Cyclic and Temporal Switching of Enzymatic Nanoreactors.

Temporal activation of biological processes by visible light and subsequent return to an inactive state in the absence of light is an essential characteristic of photoreceptor cells. Inspired by these phenomena, light-responsive materials are very attractive due to the high spatiotemporal control of light irradiation, with light being able to precisely orchestrate processes repeatedly over many cycles. Herein, it is reported that light-driven proton transfer triggered by a merocyanine-based photoacid can be used to modulate the permeability of pH-responsive polymersomes through cyclic, temporally controlled protonation and deprotonation of the polymersome membrane. The membranes can undergo repeated light-driven swelling-contraction cycles without losing functional effectiveness. When applied to enzyme loaded-nanoreactors, this membrane responsiveness is used for the reversible control of enzymatic reactions. This combination of the merocyanine-based photoacid and pH-switchable nanoreactors results in rapidly responding and versatile supramolecular systems successfully used to switch enzymatic reactions ON and OFF on demand.

Proton-Conducting Hydrogen-Bonded 3D Frameworks of Imidazo-Pyridine-Based Coordination Complexes Containing Naphthalene Disulfonates in Rhomboid Channels.

Coordination complexes of an olefinic molecule (PIP) containing pyridine and imidazopyridine moieties with ZnII /NiII metal salts were shown to exhibit appreciable proton conductivity. These complexes form 3D-hydrogen bonded frameworks containing rhomboidal channels that are occupied by uncoordinated 1,5-naphthalenedisulfonate (NDS). The extensive hydrogen bonding between the frameworks and NDS resulted in thermally stable and water-insoluble materials. Irrespective of the metal atom present, both complexes exhibited moderate to high proton conduction in the range of 10-5 to 0.5×10-3  S cm-1 depending on the temperature and humidity levels.

Converting waste Allium sativum peel to nitrogen and sulphur co-doped photoluminescence carbon dots for solar conversion, cell labeling, and photobleaching diligences: A path from discarded waste to value-added products.

Proper waste utilization in order to promote value added product is a promising scientific practice in recent era. Inspiring from the recurring trend, we propose a single step oxidative pyrolysis derived fluorescent carbon dots (C-dots) from Allium sativum peel, which is a natural, nontoxic, and waste raw material. Because of its excellent optical properties, and photostability this C-dots have been used in versatile area of applications. Due to its immediate water dispersing character, C-dots reinforced Poly(acrylic acid) (PAA) films revealed improvement in uniaxial stretching behavior and can be used as transparent sunlight conversion film. The nanocomposite film has been tested against rigorous simulated sunlight which proved almost identical sunlight conversion behavior with no photo-bleachable character which is definitely added an extra quality of transparent polymer films. Moreover, the C-dots dispersion has been used as in vitro biomarker for living cells owing to its ease in solubility, biocompatibility, non-cytotoxicity and bright fluorescence even in subcutaneous environment. For this case, adipose derived mesenchymal stem cells (ADMSCs) have been chosen and injected to rabbit ear skin to perform two-photon imaging experiment. The present work opens a new avenue towards the large-scale synthesis of bio-waste based fluorescent C-dots, paving the way for their versatile applications.

Biocompatible carbon dots derived from κ-carrageenan and phenyl boronic acid for dual modality sensing platform of sugar and its anti-diabetic drug release behavior.

Detection of sugar by enzymatic assay has been suffering from costly, time-taking, instable and denaturation of glucose oxidase. Recently, chemosensors that have affinity towards boronate became the hot topic in the domain of monosaccharide detection. In this work, a novel strategy was addressed to fabricate carbon dots (C-dots) from linear sulfated polysaccharides κ- carrageenan and phenyl boronic acid for nonenzymatic monosaccharide (glucose) detection. The boronic acid group anchored C-dots surface can form assembly by covalently bonded with the cis-diol moiety of the glucose which caused fluorescence quenching of the C-dots. The inert surface nature of the luminescent C-dots enables them to sense as low as 1.7 µM glucose without the interference of other biomolecules. The proposed sensing system was successfully applied for assay of glucose in blood serum. Interestingly, these C-dots were used as a nano vehicle for delivery of anti-diabetic drug Metformin. Good biocompatibility results were found with MTT and hemolysis assay. Owing to its simplicity and effectiveness, the as-prepared C-dots offered great promise for blood sugar diagnosis and treatment.

Glyco-pseudodendrimers on a Polyester Basis: Synthesis and Investigation of Protein-Pseudodendrimer Interaction.

Molar mass and end group number of a hyperbranched polyester are significantly increased by its transformation to a pseudodendrimer. Three generations of pseudodendrimers are obtained from hyperbranched aliphatic polyester core by modification with a protected AB*2 monomer. A sequence of protection and deprotection steps leads to OH-terminated pseudodendrimers. NMR studies confirm maximum degree of branching in the first generation, which slightly decreases in the next two generations. Uniform, dense molecular structure formation was confirmed by MD simulation. Further modification to glyco-pseudodendrimers was performed with α-D-mannose leading to high molar masses and dense distribution of sugar units. The interaction of these sugar units with a plant lectin concanavalin A (Con A) was investigated using dynamic light scattering and cryogenic transmission electron microscopy. The protein-interaction studies of the glyco-pseudodendrimers confirm a loose network with Con A. The interaction activity depends on the generation number and modification degree.

Dual doped biocompatible multicolor luminescent carbon dots for bio labeling, UV-active marker and fluorescent polymer composite.

We report on metal-non-metal doped carbon dots with very high photoluminescent properties in solution. Magnesium doping to tamarind extract associated with nitrogen-doping is for the first time reported here which also produce very high quantum yield. Our aim is to develop such dual doped carbon dots which can also serve living cell imaging with easy permeation towards cells and show non-cytotoxic attributes. More importantly, the chemical signatures of the carbon dots unveiled in this work can support their easy solubilization into water; even in sub-ambient temperature. The cytotoxicity assay proves the almost negligible cytotoxic effect against human cell lines. Moreover, the use of carbon dots in UV-active marker and polymer composites are also performed which gave clear distinguishable features of fluorescent nanoparticles. Hitherto, the carbon dots can be commercially prepared without adopting any rigorous methods and also can be used as non-photo-bleachable biomarkers of living cells.

Zinc and nitrogen ornamented bluish white luminescent carbon dots for engrossing bacteriostatic activity and Fenton based bio-sensor.

Carbon dots with heteroatom co-doping associated with consummate luminescence features are of acute interest in diverse applications such as biomolecule markers, chemical sensing, photovoltaic, and trace element detection. Herein, we demonstrate a straightforward, highly efficient hydrothermal dehydration technique to synthesize zinc and nitrogen co-doped multifunctional carbon dots (N, Zn-CDs) with superior quantum yield (50.8%). The luminescence property of the carbon dots can be tuned by regulating precursor ratio and surface oxidation states in the carbon dots. A unique attribution of the as-prepared carbon dots is the high monodispersity and robust excitation-independent emission behavior that is stable in enormously reactive environment and over a wide range of pH. These N, Zn-CDs unveils captivating bacteriostatic activity against gram-negative bacteria Escherichia coli. Furthermore, the excellent luminescence properties of these carbon dots were applied as a platform of sensitive biosensor for the detection of hydrogen peroxide. Under optimized conditions, these N, Zn-CDs reveals high sensitivity over a broad range of concentrations with an ultra-low limit of detection (LOD) indicating their pronounced prospective as a fluorescent probe for chemical sensing. Overall, the experimental outcomes propose that these zero-dimensional nano-dots could be developed as bacteriostatic agents to control and prevent the persistence and spreading of bacterial infections and as a fluorescent probe for hydrogen peroxide detection.

Novel Sulfonated Co-poly(ether imide)s Containing Trifluoromethyl, Fluorenyl and Hydroxyl Groups for Enhanced Proton Exchange Membrane Properties: Application in Microbial Fuel Cell.

A hydroxyl group containing new cardo diamine monomer was synthesized, namely 9,9-bis (hydroxy- (4'-amino(3-trifluoromethyl)biphenyl-4-oxy)-phenyl)-9H-fluorene (mixture of isomers, HAPHPF). HAPHPF, along with a sulfonated diamine monomer, 4,4'-diaminostilbene-2,2'-disulfonic acid (DSDSA), was used to prepare a series of new sulfonated copolyimides by polycondensation with 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA). The degree of sulfonation (DS < 1) was adjusted by the feed ratio of DSDSA/HAPHPF and the copolymers were named as DHN-XX, where XX denotes the mole percentage of DSDSA (XX = 50, 60, and 70). The copolymers showed high molecular weights. The copolymer structure and composition were confirmed by FTIR and NMR techniques. Copolymer membranes were prepared through solution cast route by using dimethyl sulfoxide as a solvent. The membranes showed high thermal, mechanical, hydrolytic and peroxide radical stability, and low water uptake and low swelling ratios. Well-separated hydrophilic and hydrophobic phase morphology was observed in TEM and AFM images of the copolymer membranes and was further supported by the SAXS studies. The proton conductivity of the DHN-70 was as high as 97 mS cm-1 at 80 °C and the value is significantly higher than that of the nonhydroxylated analogue. The membranes also showed superior microbial fuel cell (MFC) performance, similar like Nafion 117 under similar test conditions. The chemical oxygen demand removal values provide substantial evidence that the fabricated membranes can be utilized in bioelectrochemical systems.

Waste chimney oil to nanolights: A low cost chemosensor for tracer metal detection in practical field and its polymer composite for multidimensional activity.

Proper waste disposal from household and restaurants is becoming an important and recurring waste-management concern. Herein, a method of upcycling of waste kitchen chimney oil has been adopted to prepare fluorescent multifunctional carbon quantum dots. These nanodots showed superior biocompatibility, excellent optical properties, water solubility and high yield. Preparation of C-dots from highly abundant carbon source of waste refusals is highly effective in commercial aspect as well as in reducing the immense environmental pollution. The C-dots showed quasi-spherical size obtained from high resolution transmission electron microscopy (HRTEM) having an abundance of 1-4 nm in size. The ease of water dispersibility of the nanodots is a mere reflection of their surface polarity which has been supported by Fourier transformed infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). In the field of practical acceptability, the C-dots have been experimented to sense Fe3+ ion in a wide range of concentration (1 nM to 600 µM) with a detection limit of 0.18 nM which can be termed as 'tracer metal chemosensor'. Moreover, the prepared carbon dots were also tested against inter-cellular Fe3+ ion sensing probe. Lastly, we also fabricate the biopolymer­carbon dots composite for fluorescent marker ink and light emitting polymer film.

Polyimides Containing Phosphaphenanthrene Skeleton: Gas-Transport Properties and Molecular Dynamics Simulations.

A series of new semifluorinated polyimide (PI) films with phosphaphenanthrene skeleton were prepared by thermal imidization of poly(amic acid)s derived from a diamine monomer: 1,1-bis[2'-trifluoromethyl-4'-(4″-aminophenyl)phenoxy]-1-(6-oxido-6H-dibenz⟨c,e⟩⟨1,2⟩oxaphosphorin-6-yl)ethane on reaction with four structurally different aromatic dianhydrides. The chemical structures of the polymers were established by Fourier transform infrared and 1H NMR spectroscopy techniques. The polymers showed a good combination of thermal and mechanical properties (T d10 up to 416 °C under synthetic air and tensile strength up to 91 MPa), low dielectric constant (2.10-2.55 at 1 MHz), and T g values as high as 261 °C. Gas permeabilities of these films were investigated for four different gases CO2, O2, N2, and CH4. The PI films showed high gas permeability (P CO2 up to 175 and P O2 up to 64 barrer) with high permselectivity (P CO2 /P CH4 up to 51 and P O2 /P N2 up to 7.1), and the values are better than those of many other similar polymers reported earlier. For the O2/N2 gas pair, the PIs (PI A) surpassed the present upper boundary limit drawn by Robeson. A detailed molecular dynamics (MD) simulation study has been conducted to understand better the gas-transport properties. The effect of phosphaphenanthrene skeleton, its spatial arrangement, and size distribution function of the free volume were studied using molecular dynamics (MD) simulation and the results are correlated with the experimental data.

Synthesis and Characterization of Highly Proton Conducting Sulfonated Polytriazoles.

This article describes the synthesis and characterization of highly sulfonated polytriazole copolymers (PTSQSH-I to IV) with IECw values ranging from 2.41 to 3.49 mequiv g-1. The copolymers were synthesized by click reaction between equimolar amount of a dialkyne monomer, potassium 2,5-bis(2-propyn-1-yloxy)benzenesulfonate, and a mixture of two different diazide monomers, 4,4-bis[3'-trifluoromethyl-4'(4-azidobenzoxy)benzyl]biphenyl and 4,4'-diazido-2,2'-stilbene disulfonic acid disodium salt. The copolymers were characterized by Fourier transform infrared and NMR spectroscopy techniques. The membranes were prepared by dissolving the salt form of the copolymers in dimethyl sulfoxide. The copolymers showed high thermal, mechanical, and oxidative stabilities, and the acidified membranes showed very high proton conductivity (43-173 and 132-304 mS cm-1 at 30 and 80 °C, respectively). Transmission electron microscopy images confirmed the formation of well-phase-separated morphology with interconnected hydrophilic domains (20-150 nm).

Green approach to photoluminescent carbon dots for imaging of gram-negative bacteria Escherichia coli.

Fluorescent carbon dots, zero-dimensional nanomaterials with surface ligands, have been studied extensively over the past few years in biolabelling or fluorescence-based live cell assays. In the past, synthetic organic dyes have been used as cell tracking materials, but they have severe limitations; fluorescent carbon dots may pave the way to biolabelling and cell imaging. In this work, green fluorescent carbon dots have been synthesized from a green source, gram, without any sort of covalent or ionic modifications. These gram-derived carbon dots are unique with respect to synthetic commercial cell-tracking dyes as they are non-toxic, cell internalization occurs quickly, and they have excellent bioconjugation with bacterial cells. Our aim is to establish these carbon dots in a biolabelling assay with its other physicochemical features like the tunable luminescence property, high degree of water solubility and low toxicity, towards various environments (wide range of pH, high ionic strength). Our study introduces a new perspective on the commercialization of carbon dots as a potential alternative to synthetic organic dyes for fluorescence-based cell-labelling assays.

A simplistic approach to green future with eco-friendly luminescent carbon dots and their application to fluorescent nano-sensor 'turn-off' probe for selective sensing of copper ions.

Zero-dimensional fluorescent nanoparticles having specificity as molecular probe appears to be strategically balanced fluorescent nano-probes. In this work, purified lemon extract and l-arginine have been thermally coupled for the extremely acute detection of Cu2+ in aqueous medium. The Cu2+ ions may be captured by the amino groups on the surface of the nano-sensor to form cupric ammine complex resulting in quenched fluorescence via an inner filter effect. Our proposed nano-probe is N-doped carbon dots (NCDs) which are efficiently selective as fluorescent chemosensor due to enormous binding affinity towards Cu2+ in a wide range of concentration (0.05-300µM) within a few minutes.