RESUMEN
Alloy structures with high catalytic surface areas and tunable surface energies can lead to high catalytic selectivity and activities. Herein, the synthesis of sponge-like Pd3 Pb multiframes (Pd3 Pb MFs) is reported by using the thermodynamically driven phase segregation, which exhibit high selectivity (93%) for the conversion of furfural to furfuryl alcohol (FOL) under mild conditions. The excellent catalytic performance of the Pd3 Pb MF catalysts is attributed to the high surface area and optimized surface energy of the catalyst, which is associated with the introduction of Pb to Pd. Density functional theory calculations show that the binding energy of FOL to the surface energy-tuned Pd3 Pb MF is sufficiently lowered to prevent side reactions such as over-hydrogenation of FOL.
RESUMEN
Electron selective layers are important to the efficiency, stability and hysteresis of perovskite solar cells. Photo-annealing is a low-cost, roll-to-roll-compatible process that can be applied to the post-treatment fabrication of sol-gel based metal oxide layers. Here, we fabricate an amorphous titanium oxide electron selective layer at a low temperature in a dry atmosphere using a UV light annealing system and compare it with a thermal annealing process. Active oxygen species are created by using UV light to promote hydrolysis and condense the TiO2 precursor, which removes organic ligands effectively. The photo-annealed TiO2-based perovskite solar cell has a power conversion efficiency of 19.37% without hysteresis.
RESUMEN
Photovoltaic technologies based on perovskite absorber materials have led this optoelectronic field into a brand-new horizon. However, the present antisolvents used in the one-step spin-coating method always encounter problems with the very narrow process window. Herein, anisole is introduced into the one-step spin-coating method, and the technology is developed to fabricate perovskite thin films with ultrawide processing window with a dimethylformamide (DMF):dimethyl sulfoxide (DMSO) ratio varying from 6:4 to 9:1 in the precursor solution, anisole dripping time ranging from 5 to 25 s, and an antisolvent volume varying from 0.1 to 0.9 mL. Perovskite thin films as large as 100 cm2 are successfully fabricated using this method. Maximum photoelectric conversion efficiencies of 19.76% for small-area (0.14 cm2 ) and 17.39% for large-area (1.08 cm2 ) perovskite solar cell devices are obtained. It is also found that there are intermolecular hydrogen-bonding forces between anisole and DMF/DMSO that play critical roles in the wide process window. These results provide a deeper understanding of the crystallizing procedure of perovskite during the one-step spin-coating process.