Stabilization of Silver and Gold Nanoparticles: Preservation and Improvement of Plasmonic Functionalities.

Noble metal nanoparticles have been extensively studied to understand and apply their plasmonic responses, upon coupling with electromagnetic radiation, to research areas such as sensing, photocatalysis, electronics, and biomedicine. The plasmonic properties of metal nanoparticles can change significantly with changes in particle size, shape, composition, and arrangement. Thus, stabilization of the fabricated nanoparticles is crucial for preservation of the desired plasmonic behavior. Because plasmonic nanoparticles find application in diverse fields, a variety of different stabilization strategies have been developed. Often, stabilizers also function to enhance or improve the plasmonic properties of the nanoparticles. This review provides a representative overview of how gold and silver nanoparticles, the most frequently used materials in current plasmonic applications, are stabilized in different application platforms and how the stabilizing agents improve their plasmonic properties at the same time. Specifically, this review focuses on the roles and effects of stabilizing agents such as surfactants, silica, biomolecules, polymers, and metal shells in colloidal nanoparticle suspensions. Stability strategies for other types of plasmonic nanomaterials, lithographic plasmonic nanoparticle arrays, are discussed as well.

Self-assembled plasmonic nanoring cavity arrays for SERS and LSPR biosensing.

Self-assembled plasmonic nanoring cavity arrays are formed alongside the curvature of highly packed metallic nanosphere gratings. The sub-10-nm gap size is precisely tuned via atomic layer deposition and highly ordered arrays are produced over a cm-sized area. The resulting hybrid nanostructure boosts coupling efficiency of light into plasmons, and shows an improved SERS detection limit. These substrates are used for SERS detection of the biological analyte, adenine, followed by concurrent localized surface plasmon resonance sensing.

Recent progress in SERS biosensing.

This perspective gives an overview of recent developments in surface-enhanced Raman scattering (SERS) for biosensing. We focus this review on SERS papers published in the last 10 years and to specific applications of detecting biological analytes. Both intrinsic and extrinsic SERS biosensing schemes have been employed to detect and identify small molecules, nucleic acids, lipids, peptides, and proteins, as well as for in vivo and cellular sensing. Current SERS substrate technologies along with a series of advancements in surface chemistry, sample preparation, intrinsic/extrinsic signal transduction schemes, and tip-enhanced Raman spectroscopy are discussed. The progress covered herein shows great promise for widespread adoption of SERS biosensing.

Vertically oriented sub-10-nm plasmonic nanogap arrays.

Nanometric gaps in noble metals can harness surface plasmons, collective excitations of the conduction electrons, for extreme subwavelength localization of electromagnetic energy. Positioning molecules within such metallic nanogaps dramatically enhances light-matter interactions, increasing absorption, emission, and, most notably, surface-enhanced Raman scattering (SERS). However, the lack of reproducible high-throughput fabrication techniques with nanometric control over the gap size has limited practical applications. Here we show sub-10-nm metallic nanogap arrays with precise control of the gap's size, position, shape, and orientation. The vertically oriented plasmonic nanogaps are formed between two metal structures by a sacrificial layer of ultrathin alumina grown using atomic layer deposition. We show increasing local SERS enhancements of up to 10(9) as the nanogap size decreases to 5 nm. Because these sub-10-nm gaps can be fabricated at high densities using conventional optical lithography over an entire wafer, these results will have significant implications for spectroscopy and nanophotonics.

Self-assembled plasmonic nanohole arrays.

We present a simple and massively parallel nanofabrication technique to produce self-assembled periodic nanohole arrays over a millimeter-sized area of metallic film, with a tunable hole shape, diameter, and periodicity. Using this method, 30 x 30 microm(2) defect-free areas of 300 nm diameter or smaller holes were obtained in silver; this area threshold is critical because it is larger than the visible wavelength propagation length of surface plasmon waves ( approximately 27 microm) in the silver film. Measured optical transmission spectra show highly homogeneous characteristics across the millimeter-size patterned area, and they are in good agreement with FDTD simulations. The simulations also reveal intense electric fields concentrated near the air/silver interface, which was used for surface-enhanced Raman spectroscopy (SERS). Enhancement factors (EFs) measured with different hole shape and excitation wavelengths on the self-assembled nanohole arrays were 10(4)-10(6). With an additional Ag electroless plating step, the EF was further increased up to 3 x 10(6). The periodic nanohole arrays produced using this tunable self-assembly method show great promise as inexpensive SERS substrates as well as surface plasmon resonance biosensing platforms.

Partition layer-modified substrates for reversible surface-enhanced Raman scattering detection of polycyclic aromatic hydrocarbons.

Herein, we present progress towards an analytical sensor for polycyclic aromatic hydrocarbons (PAHs) using surface-enhanced Raman scattering (SERS) on partition layer-modified nanostructured substrates. Specifically, a 1-decanethiol monolayer has been assembled on a silver film over nanospheres substrate to concentrate PAHs within the zone of SERS detection. Both anthracene and pyrene were detected with limits of detection at 300 and 700 pM, respectively. The measured SERS spectra allowed for easy distinction of the two PAH compounds, due to varying peak locations, and insight into the partitioning mechanism. Additionally, exposure to a common environmental interferant, Suwannee River fulvic acid, did not impede the measurement of the PAHs, and the sensor is reusable after a short exposure to 1-octanol. Finally, the utility of this sensing platform for PAH detection was compared to that achievable for other classes of organic pollutants such as polychlorinated biphenyls and polybrominated diphenyl ethers.

Toxicity of therapeutic nanoparticles.

A total of six nanotherapeutic formulations are already approved for medical use and more are in the approval pipeline currently. Despite the massive research effort in nanotherapeutic materials, there is relatively little information about the toxicity of these materials or the tools needed to assess this toxicity. Recently, the scientific community has begun to respond to the paucity of information by investing in the field of nanoparticle toxicology. This review is intended to provide an overview of the techniques needed to assess toxicity of these therapeutic nanoparticles and to summarize the current state of the field. We begin with background on the toxicological assessment techniques used currently as well as considerations in nanoparticle dosing. The toxicological research overview is divided into the most common applications of therapeutic nanoparticles: drug delivery, photodynamic therapy and bioimaging. We end with a perspective section discussing the current technological gaps and promising research aimed at addressing those gaps.

Surface-enhanced Raman scattering substrates fabricated using electroless plating on polymer-templated nanostructures.

Surface-enhanced Raman scattering (SERS) has great potential as an analytical technique based on the unique molecular signatures presented even by structurally similar analyte species and the minimal interference of scattering from water when sampling in aqueous environments. Unfortunately, analytical SERS applications have been restricted on the basis of limitations in substrate design. Herein, we present a simple SERS substrate that exploits electroless deposition onto a nanoparticle-seeded polymer scaffold that can be fabricated quickly and without specialized equipment. The polymer-templated nanostructures have stable enhancement factors that are comparable to the traditional silver film over nanospheres (AgFON) substrate, broad localized surface plasmon resonance spectra that allow various Raman excitation wavelengths to be utilized, and tolerance for both aqueous and organic environments, even after 5 day exposure. These polymer-templated nanostructures have an advantage over the AgFON substrate based on the ease of fabrication; specifically, the ability to generate fresh SERS substrates outside the laboratory environment will facilitate the application of SERS to new analytical spectroscopy applications.