A biocompatible double network hydrogel based on poly (acrylic acid) grafted onto sodium alginate for doxorubicin hydrochloride anticancer drug release.

This study involved the synthesis of a new biocompatible slow-release hydrogel named poly (acrylic acid) grafted onto sodium alginate (poly (AA-g-SA)) double network hydrogel (DNH). The hydrogel was created by polymerization of acrylic acid grafted onto sodium alginate polysaccharide using crosslinkers N,N'-methylenebisacrylamide and calcium chloride via free radical polymerization. The water absorbency of the poly (AA-g-SA) double network hydrogel was improved by optimizing the quantities of ammonium persulfate initiator, pH-sensitive monomer of acrylic acid, and crosslinkers. Various analytical techniques including attenuated total reflection Fourier-transformed infrared (ATR-FTIR), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), and Brunauer-Emmett-Teller specific surface area analysis (BET) were used to characterize the synthesized hydrogels. The swelling and on-off switching behaviors of the hydrogels were investigated in deionized (DI) water at different temperatures and pH values. The optimum poly (AA-g-SA) DNH was tested for in vitro release of a hydrophilic chemotherapeutic drug, doxorubicin hydrochloride (DOX). The eco-friendly hydrogel favorably optimized the DOX slow release owing to its swelling rate, high absorption and regeneration capabilities. The findings of this study may have significant implications for medical and scientific research.

A novel sinusoidal design for an electrocoagulation reactor followed by an electro-Fenton reaction and a porous ceramic filter for the treatment of polluted waters.

In this research work, a novel design of an electro-Fenton reactor for the treatment of polluted water was investigated. In addition to the reactor with iron electrodes, a ceramic filter was also used. An electrical circuit was designed to change the cathodes and anodes every 24 s via an electrical relay between the electrodes. The untreated water was sucked into the reactor with an air pump and entered the electrocoagulation chamber after filtration with a ceramic filter. Then, it flows to the polyethylene filter to separate the coagulated particles from the fresh water. To produce 12 L of clean water, the system consumed 100 W of energy. Analysis of a river sample showed a reduction in nephelometric turbidity units (NTUs), total suspended solids (TSS), biochemical oxygen demand (BOD), and chemical oxygen demand (COD). Turbidity reduction studies have shown that the system can improve water transparency by 95%, thereby improving water quality to acceptable levels. Further, this system reduced TSS by more than 86%. In addition, BOD was reduced by more than 84% and COD by more than 88%, as shown by the change in the ratio of BOD to COD from 0.44 to 0.625, indicating improved water quality. According to the results, the treatment system can clean polluted waters, particularly during floods and when industries discharge their effluents into rivers.

Nanoporous hydrogel absorbent based on salep: Swelling behavior and methyl orange adsorption capacity.

This study used the gas-blowing method to develop a nanoporous hydrogel using poly (3-sulfopropyl acrylate-co-acrylic acid-co-acrylamide) grafted onto salep. The synthesis of the nanoporous hydrogel was optimized by various parameters for maximum swelling capacity. The nanoporous hydrogel was characterized using FT-IR, TGA, XRD, TEM, and SEM analyses. Images from SEM showed numerous pores and channels in the hydrogel with an average size of about 80 nm, forming a honeycomb-like shape. The change in surface charge was investigated by zeta potential and revealed that the surface charge of the hydrogel ranged from 20 mV at acidic conditions to -25 mV at basic conditions. The swelling behavior of optimum superabsorbent hydrogel was determined under different environmental conditions, such as different pH values, ionic strengths of the environment, and solvents. In addition, the swelling kinetics and the absorbance under loading of the hydrogel sample in different environments were investigated. Moreover, Methyl Orange (MO) dye was removed from aqueous solutions using the nanoporous hydrogel as an adsorbent. The adsorption behavior of the hydrogel was examined under various conditions, and the adsorption capacity of the hydrogel was found tobe 400 mg g-1. The maximum water uptake was obtained under the following conditions: Salep weight = 0.01 g, AA = 60 µL, MBA = 300 µL, APS = 60 µL, TEMED = 90 µL, AAm = 600 µL, and SPAK = 90 µL. Lastly, the adsorption kinetics was studied by employing pseudo-first-order, pseudo-second-order, and intra-particle diffusion models.

Rapid and Highly Sensitive Detection of Target DNA Related to COVID-19 Virus With a Fluorescent Bio-conjugated Probe via a FRET Mechanism.

A novel cyanine 3 (Cy3)-based bio-conjugated sensor has been developed to detect target DNA or extracted RNA from COVID -19 samples using the fluorescence resonance energy transfer (FRET) experiment. A special sequence of the COVID -19 genome was selected as a complementary DNA (target DNA) part. The opposite chain of this target sequence was designed in 2 parts; one part was attached to the Cy3 organic dye (capture DNA or Cy3- DNA), and the other part was attached to the BHQ2 molecule (quencher DNA or BHQ2- DNA). The Cy3 molecule acts as a donor pair, and BHQ2 acts as an acceptor pair in the FRET experiment. The capture DNA and quencher DNA can form a sandwiched complex in the presence of target DNA. The formation of the entitled sandwiched hybrid causes the decrement of emission intensity of the Cy3 donor in bio-conjugated Cy3-DNA via energy transfer from Cy3 (as a donor) to BHQ2 (as an acceptor). Indeed, in the presence of non-complementary DNA, the pairing of DNA strands does not occur, the FRET phenomenon does not exist, and therefore fluorescence intensity of Cy3 does not decrease. Moreover, this biosensor was successfully applied to analyze real samples containing extracted RNA of COVID -19 prepared for the reverse transcriptase-polymerase chain reaction (RT-PCR) test, and the results were promising.

Capability of novel fluorescence DNA-conjugated CdTe/ZnS quantum dots nanoprobe for COVID-19 sensing.

Urgent identification of COVID-19 in infected patients is highly important nowadays. Förster or fluorescence resonance energy transfer (FRET) is a powerful and sensitive method for nanosensing applications, and quantum dots are essential materials in FRET-based nanosensors. The QDs are conjugated to DNA or RNA and used in many applications. Therefore, in the present study, novel fluorescence DNA-conjugated CdTe/ZnS quantum dots nanoprobe designed for detection of Covid-19 after extracting their RNA from saliva of hesitant people. For achieving this purpose, the water-soluble CdTe/ZnS QDs-DNA prepared via replacing the thioglycolic acid (TGA) on the surface of QDs with capture DNA (thiolated DNA) throw a ligand-exchange method. Subsequently, by adding the different concentrations of complementary (target DNA) in a mixture of quencher DNA (BHQ2-labeled DNA) and the QDs-DNA conjugates at different conditions, sandwiched hybrids were formed. The results showed that the fluorescence intensity was decreased with increasing the concentration of target DNA (as a positive control). The linear equation and regression (Y = 40.302 X  + 1 and R2 = 0.98) were obtained by using the Stern-Volmer relationship. The Limit of detection (LOD) was determined 0.000823 µM. The achieved results well confirm the outcomes of the RT-PCR method in real samples.

Efficient and Versatile Application of Fluorescence DNA-Conjugated CdTe Quantum Dots Nanoprobe for Detection of a Specific Target DNA of SARS Cov-2 Virus.

Regarding the outbreak of the SARS Cov-2 virus pandemic worldwide, it seems necessary to provide new diagnostic methods to combat the virus. A fluorescence CdTe quantum dots-DNA (QDs-DNA) nanosensor was prepared for efficient detection of a specific target complementary DNA or RNA from the SARS Cov-2 virus using FRET experiment via forming a classic "sandwich" structure. The sequence of the complementary DNA (target DNA) is planned based on a substantial part of the SARS Cov-2 virus genome, and oligonucleotides of QDs-DNA nanoprobe are designed to complement it. The water-soluble CdTe QDs-DNA was prepared by replacing the thioglycolic acid (TGA) on the surface of QDs with capture DNA (thiolated DNA) through a ligand-exchange method. Subsequently, with the addition of complementary (target DNA) and quencher DNA (BHQ2-labeled DNA) into the QDs-DNA conjugates, sandwiched hybrids were formed. The resulting assembly brings the BHQ2-labeled DNA (as the acceptor), and the QDs (as the donor) into proximity, leading to quenching of fluorescence emission from the donor QDs through the FRET mechanism. In other words, a simple, highly sensitive, selective, and rapid approach was introduced to detect complementary DNA sequence from a specific part of the SARS Cov-2 virus genome with a detection limit of 2.52 × 10-9 mol L-1. Furthermore, the planned nanosensor was well used for the detection of RNA from SARS Cov-2 viruses in real samples with satisfactory analytical results, and the outcomes were compared with RT-PCR (Reverse Transcription Polymerase Chain Reaction) as the well-known standard method.

Novel CMC-CdTe / ZnS QDs Nanosensor for the Detection of Anticancer Drug Epirubicin.

Epirubicin (EPI) is one of the standard anticancer drugs that apply for various cancers treatment. However, the accumulation of EPI in the human body can be highly toxic, and it causes inevitable harm to organs. As a result, the evaluation of low concentrations of this drug in body samples requires sensitive, rapid, and accurate analysis methods. The fluorescence method is an efficient way in comparison of the traditional methods such as liquid chromatography, capillary electrophoresis, and electrochemical methods. Herein, we synthesized a novel fluorescence nanosensor named CMC-CdTe/ZnS based on using quantum dots (QDs). The structure of the prepared nanosensor is confirmed by different analysis methods such as FT-IR, TGA, and TEM. Besides that, the fluorescence intensity response of CMC-CdTe/ZnS QDs in the presence of Epirubicin drug is investigated. Based on obtained results, not only this nanosensor developed, but also the fluorescence quenching was explained by the typical Stern-Volmer equation. The best linear quenching equation for entitled nanosensor in the presence of Epirubicin is F0/F = 0.0346Q + 1.08 (R2 = 0.99), and the detection limit of Epirubicin is around 0.04 × 10-6 mol/L at 25 °C. All of the results display that this method could be reliable and suitable approach for determination of Epirubicin in commercial samples as well.

Heterojunction of N/B/RGO and g-C3N4 anchored magnetic ZnFe2O4@ZnO for promoting UV/Vis-induced photo-catalysis and in vitro toxicity studies.

To promote the low photocatalytic efficiency caused by the recombination of electron/hole pairs and widen the photo-response wavelength window, ZnFe2O4@ZnO-N/B/RGO and ZnFe2O4@ZnO-C3N4 ternary heterojunction nanophotocatalysts were designed and successfully prepared through a sol-gel technique. In comparison to bare ZnFe2O4 and ZnO, the ZnFe2O4-ZnO@N/B/RGO and ZnFe2O4@ZnO-C3N4 ternary products showed highly improved photocatalytic properties in the degradation of methyl orange (MO) under ultra-violet (UV) and visible light irradiation. Various physicochemical properties of the photocatalysts were evaluated through field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) techniques. The observations indicated that the ternary heterojuncted ZnFe2O4@ZnO-N/B/RGO absorbs lower energy visible light wavelengths, which is an enhancement in the photocatalytic properties of ZnFe2O4@ZnO loaded on reduced graphene oxide (RGO) nanosheets and graphite-like carbon nitride (g-C3N4). This gives the catalyst photo-Fenton degradation properties.

Multi-stimuli responsive nanogel/hydrogel nanocomposites based on κ-carrageenan for prolonged release of levodopa as model drug.

This study describes the development of a novel biocompatible nanogel/hydrogel nanocomposite system for long-term delivery of bioactive molecules. To this aim, the nanogels were synthesized via radical polymerization of poly(N-isopropylacrylamide). The nanogels were introduced during the formation of a hydrogel network to produce nanogel/hydrogel soft nanocomposites, while the biocompatible hydrogel was based on poly (acrylic acid) grafted onto κ-carrageenan polysaccharide with entrapped magnetic iron oxide nanoparticles as crosslinker. In these systems, by using stimuli-responsive functional polymers in both gels (nanogels and hydrogels), pH, thermal and magnetic-responsive properties can be brought to final soft nanocomposites. The obtained soft nanocomposite was characterized by Fourier transform infrared spectrum (FT-IR), thermogravimetric (TG) analysis, and scanning electron microscopy (SEM). This biopolymer based nanogel/hydrogel used as a prolonged releasing drug carrier for levodopa (L-DOPA) as a main drug for treating Parkinson's symptoms. The in vitro release of L-DOPA was investigated at different pHs. pH-dependent release of the active drug can be sustained for >11 days from this soft nanocomposite. The results demonstrated a sustained release model that can be extended for other drugs.

Facile access to new pyrido[2,3-d]pyrimidine derivatives.

In this report, a facile, operationally, simple and highly efficient one-pot coupling of 2,6-diaminopyrimidin-4(3H)-one and ethyl-2,4-dioxo-4-phenylbutanoate derivatives is reported. This method afforded a novel series of ethyl-2-amino-3,4-dihydro-4-oxo-5-phenyl pyrido[2,3-d] pyrimidine-7-carboxylate heterocycle derivatives in high yields under refluxing AcOH.

Synthesis, characterization and energy transfer studies of fluorescent dye-labeled metal-chelating polymers anchoring pendant thiol groups for surface modification of quantum dots and investigation on their application for pH-responsive controlled release of doxorubicin.

We describe the synthesis of an end-functionalized fluorescent dye-labeled poly(N-(2-thiolethyl methacrylamide) as a metal chelating polymer with a very narrow size distribution and controllable molecular weights by reversible addition-fragmentation chain transfer polymerization. In following, we apply this water-soluble metal-chelating polymer for surface modification of cadmium telluride quantum dots (CdTe QDs) by ligand exchange method. The obtained poly(N-(2-thiolethyl methacrylamide)/CdTe QDs hybrid was fully characterized using Fourier transform infrared spectroscopy (FT-IR), thermo-gravimetric analysis (TG) and transmission electron microscopy (TEM). The size of the prepared hybrid was estimated around 3.2 nm by TEM. Furthermore, we used this hybrid for improving the release performance of doxorubicin hydrochloride as a chemotherapeutic model drug. The in vitro release of doxorubicin was studied in pH 5.4 and 7.4, which release curves were nicely fitted by the Korsemeyer-Peppas equation and the release followed by non-Fickian diffusion or anomalous diffusion in pH 5.4. The synthesized fluorescent dye-labeled hybrid can be used as a donor-acceptor pair for fluorescence resonance energy transfer (FRET) experiments, so the energy transfer behavior between fluorescent dye as a donor and CdTe QDs as an acceptor were interrogated using Förster/fluorescence resonance energy transfer model, which the distance was found to be 3.95 nm. This present work has potential for both diagnostic and therapeutic aspects for cancer patients.

Ligand-Capped CdTe Quantum Dots as a Fluorescent Nanosensor for Detection of Copper Ions in Environmental Water Sample.

In this work, as a novel fluorescent nano-sensor, a ligand-capped CdTe QDs (CdTe-L QDs) was designed for the detection and quantification of Cu2+ ions in environmental water samples. The synthesized QDs were characterized by transmission electron microscopy (TEM), thermo-gravimetric (TG) analysis, Fourier transform infrared (FTIR), UV-Vis spectrophotometry and fluorescence spectroscopy. Optical properties of the produced nanosensor were monitored by UV-Vis and fluorescence spectrophotometry. It was observed that fluorescence intensity of the produced nano-sensor selectively quenched by adding Cu2+ ions in comparison to other metal ions tested. Using CdTe-L QDs, a rapid and facile analytical method was developed to determine Cu2+ ions in the concentration range of 5.16 ± 0.07 × 10- 8 mol L- 1-1.50 ± 0.03 × 10- 5 mol L- 1 with a detection limit of 1.55 ± 0.05 × 10- 8 mol L- 1. The nanosensor was successfully applied for the determination of Cu2+ ions in various water samples, and the results were compared with the standard method. Graphical Abstract.

Dendrimer-reinforced sol-gel based hollow fiber solid-phase microextraction for citalopram determination using response surface methodology.

The inclusion of a polyamidoamine dendrimer in a silica sol-gel yielded a solid nanosorbent that was used for the preconcentration, extraction, and determination of citalopram in hospital waste water, hemodialysis solution, and some drinking water. The method was developed by applying a novel nanosorbent for the solid-phase microextraction of citalopram, containing a silica sol-gel reinforced by polyamidoamine second-generation dendrimer, which was protected by a polypropylene hollow fiber. Plackett-Burman design and central composite design were utilized to evaluate the significance of several factors on the extraction efficiency. The adsorption mechanism and thermodynamic and kinetic aspects were studied. The adsorption process was exothermic and well fitted to the Bangham equation kinetic model. Under optimal conditions, the presented method was liner in the range of 0.05-100 µg/mL. The limits of detection of quantification of citalopram were 0.0095 and 0.031 µg m/L, respectively.

Synthesis of a novel thermo/pH sensitive nanogel based on salep modified graphene oxide for drug release.

Nanogels (NGs) are three-dimensional water soluble cross-linked hydrogel materials in the nanoscale size range with a high loading capacity for guest molecules and act as drug carrier systems. In the present work, a new type of thermo/pH sensitive NG comprising salep modified graphene oxide (SMGO) with branched N-isopropylacrylamide (NIPAM) and acrylic acid (AA) was prepared. The SMGO/P(NIPAM-co-AA) NGs exhibited nanoporous structure and spherical particles with diameters about 82nm as characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The samples were also characterized by Fourier transform infrared spectroscopy (FT-IR) and thermo gravimetric analysis (TGA) to further confirm about the formation of NGs. Doxorubicin (DOX) loaded SMGO/P(NIPAM-co-AA) NGs showed thermo/pH dependent releasing behavior: slow drug release at neutral pH and lower temperature but increased significantly in acidic pH and higher temperature, without any burst release. In addition, the NGs exhibited no effect on the cell viability in the tested concentration range up to 410µg/mL and drug release systems enhanced toxicity to HeLa cells when compared to the equivalent dose of the free drug. Overall, our results put forth NGs as potential candidates in the development of a new nanocarrier for anti-cancer drug delivery.

Fluorescence enhancement of glutathione capped CdTe/ZnS quantum dots by embedding into cationic starch for sensitive detection of rifampicin.

In this study, we describe the synthesis of a new quantum dots (QDs) by embedding glutathione capped CdTe/ZnS QDs into cationic starch biopolymer (CS-GSH-CdTe/ZnS QDs). The fluorescence intensity of prepared QDs was significantly enhanced. When QDs interacted with rifampicin, the fluorescence intensity of the CS-GSH-CdTe/ZnS QDs was highly quenched compared with GSH-CdTe/ZnS QDs. Based on the above, a new fluorescent nanosensor for simple, sensitive and selective detection of rifampicin was developed. The fluorescence quenching was well described by the typical Stern-Volmer equation. After optimization, the linear range of the as-prepared QDs fluorescence intensity versus the concentration of rifampicin was F0/F=0.0422Q+1.109 (R2=0.99). The detection limit was 0.06×10-6mol/L. The proposed method with satisfactory results was used to detect rifampicin in commercial capsules and tablets.

Probing the interaction of a new synthesized CdTe quantum dots with human serum albumin and bovine serum albumin by spectroscopic methods.

A novel CdTe quantum dots (QDs) were prepared in aqueous phase via a facile method. At first, poly (acrylic amide) grafted onto sodium alginate (PAAm-g-SA) were successfully synthesized and then TGA capped CdTe QDs (CdTe-TGA QDs) were embed into it. The prepared CdTe-PAAm-g-SA QDs were optimized and characterized by transmission electron microscopy (TEM), thermo-gravimetric (TG) analysis, Fourier transform infrared (FT-IR), UV-vis and fluorescence spectroscopy. The characterization results indicated that CdTe-TGA QDs, with particles size of 2.90 nm, were uniformly dispersed on the chains of PAAm-g-SA biopolymer. CdTe-PAAm-g-SA QDs also exhibited excellent UV-vis absorption and high fluorescence intensity. To explore biological behavior of CdTe-PAAm-g-SA QDs, the interactions between CdTe-PAAm-g-SA QDs and human serum albumin (HSA) (or bovine serum albumin (BSA)) were investigated by cyclic voltammetry, FT-IR, UV-vis, and fluorescence spectroscopic. The results confirmed the formation of CdTe-PAAm-g-SA QDs-HSA (or BSA) complex with high binding affinities. The thermodynamic parameters (ΔG<0, ΔH<0 and ΔS<0) were indicated that binding reaction was spontaneous and van der Waals interactions and hydrogen-bond interactions played a major role in stabilizing the CdTe-PAAm-g-SA QDs-HSA (or BSA) complexes. The binding distance between CdTe-PAAm-g-SA QDs and HSA (or BSA)) was calculated about 1.37 nm and 1.27 nm, respectively, according to Forster non-radiative energy transfer theory (FRET). Analyzing FT-IR spectra showed that the formation of QDs-HSA and QDs-BSA complexes led to conformational changes of the HSA and BSA proteins. All these experimental results clarified the effective transportation and elimination of CdTe-PAAm-g-SA QDs in the body by binding to HSA and BSA, which could be a useful guideline for the estimation of QDs as a drug carrier.

Study on the interaction of Co (III) DiAmsar with serum albumins: spectroscopic and molecular docking methods.

This study was designed to examine the interaction of cobalt-3,6,10,13,16,19-hexaazabicyclo[6.6.6]eicosane-1,8-diamine (Co(III) DiAmsar) as a hexadentate ligand with human serum albumin (HSA) and bovine serum albumin (BSA) under physiological conditions in Tris-HCl buffer solution at pH 7.4. To this aim, at first, Co (III) DiAmsar was synthesized and characterized by nuclear magnetic resonance (NMR), and mass spectroscopy and then its interaction with HSA and BSA was investigated by means of various spectroscopic methods (Fourier transform infrared (FT-IR), UV-visible (UV-vis), fluorescence, and cyclic voltammetry (CV)) and molecular docking technique. The results of fluorescence titration revealed that the Co (III) DiAmsar strongly quench the intrinsic fluorescence of HSA and BSA through a static quenching procedure. Binding constants (Ka) and the number of binding sites (n∼1) were calculated using Stern-Volmer equations. The ΔG parameters at different temperatures were calculated. Subsequently, the values of ΔH and ΔS were also calculated, which revealed that the van der Waals and hydrogen bonding interaction splay a major role in Co (III) DiAmsar-HSA and Co (III) DiAmsar-BSA associations. The distance r between donor (HSA and BSA) and acceptor (Co (III) DiAmsar) was obtained according to fluorescence resonance energy transfer. The data obtained by the molecular modeling study revealed the surrounding residues of HSA and BSA around Co (III) DiAmsar.

Synthesis of a novel supermagnetic iron oxide nanocomposite hydrogel based on graft copolymerization of poly((2-dimethylamino)ethyl methacrylate) onto salep for controlled release of drug.

In this research, a novel supermagnetic iron oxide nanocomposite hydrogel was prepared using simultaneous in situ formation of iron oxide nanoparticles (IONs) and three-dimensional cross-linked polymer networks based on graft copolymerization of poly((2-dimethylamino)ethyl methacrylate) (PDMA) onto salep (PDMA-g-salep). The prepared ION-PDMA-g-salep hydrogel was systematically characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDAX), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), and vibrating sample magnetometer (VSM). In addition, the ION-PDMA-g-salep hydrogel exhibits favorable swelling properties that are sensitive to temperature, pH, and external magnetic field (EMF). The drug release behavior of the prepared hydrogel under EMF, different temperatures and pHs was also studied for the evaluation of the release mechanism and determination of diffusion coefficients. Finally, the antibacterial activity and cytotoxicity studies of the prepared hydrogel were examined. These results suggested that the ION-PDMA-g-salep hydrogel could be a promising candidate for biological dressing applications.

One-pot synthesis of biocompatible superparamagnetic iron oxide nanoparticles/hydrogel based on salep: characterization and drug delivery.

This work describes synthesis of biocompatible magnetic iron oxide nanoparticles/hydrogel based on salep (MION-salep hydrogel) by a facile one-pot strategy. The prepared sample was characterized by techniques like scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDAX), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM). The obtained MION had an 8 nm diameter with a narrow size distribution and was superparamagnetic with large saturation magnetization at room temperature. The most attractive feature of the obtained sample was its swelling properties under external magnetic field (EMF), different temperatures, and pHs. Moreover, MION-salep hydrogel showed ability to deferasirox release at pH=7 with non-Fickian diffusion mechanism. An in vitro cytotoxicity study implied that the as-synthesized sample is nontoxic.

Optical properties of water soluble CdSe quantum dots modified by a novel biopolymer based on sodium alginate.

Water soluble CdSe quantum dots (QDs) were modified using a novel biopolymer based on the graft copolymerization of poly (acrylic acid) as a monomer onto sodium alginate as a backbone at room temperature. The obtained CdSe QDs were characterized by Fourier transform infrared spectrometer, thermo-gravimetry analysis, transmission electron microscopy, and dynamic light scattering. Optical properties of the prepared CdSe QDs were investigated by absorption and fluorescence spectra. It was found that the resultant QDs incredibly exhibited high fluorescence intensity and quantum yields. Lastly, the influence of the aging time on the fluorescence intensity of the modified CdSe QDs was studied by their fluorescence spectra. Due to the optical behavior of this modified QDs; it could be of potential interest in biological systems.