Building sustainability assessment: A comparison between ITACA, DGNB, HQE and SBTool alignment with the European Green Deal.

The environmental impact of the construction industry is very heavy. Therefore, the global community is further developing green building assessment tools in order to enhance their efficiency in matching sustainability goals and being more environmentally friendly. An analysis approach by means of Multi-Criteria Decision Making (MCDM) was carried out to examine the degree of response of different green building tools utilized in Europe, namely (Innovazione e Trasparenza degli Appalti e la Compatibilità Ambientale ITACA, Deutsches Guetsiegel Nachhaltiges Bauen (DGNB), Haute Qualité Environnementale (HQE) and Sustainable Building Tool (SBTool), to the eight criteria of the European Green Deal (EGD), a roadmap elaborated by the European Commission to enhance sustainability deployment in the region. The first phase of the analysis consisted of a Boolean MCDM aiming to define to which criterion of the EGD each indicator in the tools checklists is linked. These data obtained were later examined by means of Fuzzy Logic to obtain comparable results showing how much each tool helps more following the European roadmap towards sustainability. This work intends to compare the efficiency of the most used tools in Europe for building sustainability evaluation while being based on a particular specified reference and not only the sustainable goals in general. This work also shows the efficiency of combining two MCDCM techniques to obtain better analyzing output. The result of this study shows that the DGNB is the most effective method for connecting all EGD criteria in a balanced manner. The HQE tool demonstrated a strong ability to effectively integrate the objectives of the EGD, except for the energy evaluation aspect. For the ITACA tool, it closely aligned DGNB in its response to the EGD, although it had an absent focus on the smart and sustainable shift of mobility. SBTool demonstrated average performance when compared to other protocols. This was expected since SBTool was the basis on which ITACA, DGNB, and HQE were constructed.

Wetting Behavior Driven by Surface Morphology Changes Induced by Picosecond Laser Texturing.

The laser surface texturing (LST) technique has recently been used to enhance adhesion bond strength in various coating applications and to create structures with controlled hydrophobic or superhydrophobic surfaces. The texturing processing parameters can be adjusted to tune the surface's polarity, thereby controlling the ratio between the polar and dispersed components of the surface free energy and determining its hydrophobic character. The aim of this work is to systematically select appropriate laser and scan head parameters for high-quality surface topography of metal-based materials. A correlation between texturing parameters and wetting properties was made in view of several technological applications, i.e., for the proper growth of conformal layers onto laser-textured metal surfaces. Surface analyses, carried out by scanning electron microscopy and profilometry, reveal the presence of periodic microchannels decorated with laser-induced periodic surface structures (LIPSS) in the direction parallel to the microchannels. The water contact angle varies widely from about 20° to 100°, depending on the treated material (titanium, nickel, etc.). Nowadays, reducing the wettability transition time from hydrophilicity to hydrophobicity, while also changing environmental conditions, remains a challenge. Therefore, the characteristics of environmental dust and its influence on the properties of the picosecond laser-textured surface (e.g., chemical bonding of samples) have been studied while monitoring ambient conditions.

Nano-Hybrid Ag@LCCs Systems with Potential Wound-Healing Properties.

The synthesis of contaminant-free silver@linear carbon chains (Ag@LCCs) nanohybrid systems, at different Ag/LCCs ratios, by pulsed laser ablation was studied. The ablation products were first characterized by several diagnostic techniques: conventional UV-Vis optical absorption and micro-Raman spectroscopies, as well as scanning electron microscopy, operating in transmission mode. The experimental evidence was confirmed by the theoretical simulations' data. Furthermore, to gain a deeper insight into the factors influencing metal@LCCs biological responses in relation to their physical properties, in this work, we investigated the bioproperties of the Ag@LCCs nanosystems towards a wound-healing activity. We found that Ag@LCC nanohybrids maintain good antibacterial properties and possess a better capability, in comparison with Ag NPs, of interacting with mammalian cells, allowing us to hypothesize that mainly the Ag@LCCs 3:1 might be suitable for topical application in wound healing, independent of (or in addition to) the antibacterial effect.

Multivariate Statistics, Mineralogy, and Radiological Hazards Assessment Due to the Natural Radioactivity Content in Pyroclastic Products from Mt. Etna, Sicily, Southern Italy.

In this article, an investigation of the natural radioactivity content of pyroclastic products from Mt. Etna, eastern Sicily, Southern Italy, was carried out. In particular, the assessment of the average activity concentration of the investigated radionuclides, related to the mineralogical phase composition of the analyzed samples, and the radiological health risk for the population, was performed. High Purity Germanium (HPGe) gamma-ray spectrometry was employed in order to quantify the average specific activity of 226Ra, 232Th, and 40K natural radioisotopes. The absorbed gamma dose rate (D), the radium equivalent activity (Raeq), the hazard indices (Hin and Hex), the annual effective dose equivalent outdoor (AEDEout), and the excess lifetime cancer risk (ELCR) were also estimated in order to assess any possible radiological hazard for the population. In our case, they were found to be lower than the maximum recommended values for the population members, thus reasonably excluding radiological hazard effects. Moreover, the identification of the source of the aforementioned naturally occurring radionuclides was attempted by X-ray Diffraction (XRD) and Micro-Raman Scattering (MRS), thereby recognizing the main radioisotope-bearing minerals present in the investigated pyroclastic products. Finally, Pearson correlation, Principal Component Analysis (PCA), and Hierarchical Cluster Analysis (HCA) were performed by processing observed radioactivity and radiological parameters in order to determine their correlation with the sampling locations.

Low cost tips for tip-enhanced Raman spectroscopy fabricated by two-step electrochemical etching of 125 µm diameter gold wires.

Tip-enhanced Raman spectroscopy (TERS) has become a well-applied technique for nanospectroscopy, allowing for single molecule sensitivity with sub-nanometer spatial resolution. The demand for efficient, reproducible and cost-effective probes for TERS is increasing. Here we report on a new electrochemical etching protocol to fabricate TERS tips starting from 125 µm diameter gold wires in a reproducible way. The process is reliable (50% of the tips have radius of curvature <35 nm, 66% <80 nm), fast (less than 2 min) and 2.5 times cheaper than the etching of standard 250 µm diameter wires. The TERS performance of the tips is tested on dyes, pigments and biomolecules and enhancement factors higher than 105 are observed. TERS mapping with a spatial resolution of 5 nm is demonstrated.

Nanoscale Discrimination between Toxic and Nontoxic Protein Misfolded Oligomers with Tip-Enhanced Raman Spectroscopy.

Highly toxic protein misfolded oligomers associated with neurological disorders such as Alzheimer's and Parkinson's diseases are nowadays considered primarily responsible for promoting synaptic failure and neuronal death. Unraveling the relationship between structure and neurotoxicity of protein oligomers appears pivotal in understanding the causes of the pathological process, as well as in designing novel diagnostic and therapeutic strategies tuned toward the earliest and presymptomatic stages of the disease. Here, it is benefited from tip-enhanced Raman spectroscopy (TERS) as a surface-sensitive tool with spatial resolution on the nanoscale, to inspect the spatial organization and surface character of individual protein oligomers from two samples formed by the same polypeptide sequence and different toxicity levels. TERS provides direct assignment of specific amino acid residues that are exposed to a large extent on the surface of toxic species and buried in nontoxic oligomers. These residues, thanks to their outward disposition, might represent structural factors driving the pathogenic behavior exhibited by protein misfolded oligomers, including affecting cell membrane integrity and specific signaling pathways in neurodegenerative conditions.