Giant Invasive Intradural Extramedullary Lumbar Schwannoma: A Case Report and Literature Review.

Schwannomas are benign nerve sheath tumors that arise from Schwann cells, which are responsible for producing the myelin sheath that surrounds nerves. They are typically slow-growing and can occur in various locations in the body, including the lumbar region of the spine. We present a case of giant invasive intradural extramedullary schwannoma managed with posterior lumbar interbody fusion (PLIF) and laminectomy with excellent results. A 58-year-old man presented with lower back pain radiating to the right leg for six months. He had no history of trauma or systemic disease. Lumbosacral magnetic resonance imaging (MRI) showed a well-defined mass at the L3-L4 level compressing the right nerve root. The patient was managed with L3-L4-L5 transpedicular fixation and right-side laminectomy L3-L4 for resection of the tumor. Histopathological examination confirmed the diagnosis of schwannoma. The patient had a favorable postoperative recovery and experienced a resolution of symptoms. Lumbar schwannomas are rare they can cause significant symptoms and require appropriate diagnosis and management. Microsurgery is the preferred treatment, and endoscopic microsurgery is the most promising technique.

Development of a 3D Printed Brain Model with Vasculature for Neurosurgical Procedure Visualisation and Training.

BACKGROUND: Simulation-based techniques using three-dimensional models are gaining popularity in neurosurgical training. Most pre-existing models are expensive, so we felt a need to develop a real-life model using 3D printing technology to train in endoscopic third ventriculostomy. METHODS: The brain model was made using a 3D-printed resin mold from patient-specific MRI data. The mold was filled with silicone Ecoflex™ 00-10 and mixed with Silc Pig® pigment additives to replicate the color and consistency of brain tissue. The dura mater was made from quick-drying silicone paste admixed with gray dye. The blood vessels were made from a silicone 3D-printed mold based on magnetic resonance imaging. Liquid containing paprika oleoresin dye was used to simulate blood and was pumped through the vessels to simulate pulsatile motion. RESULTS: Seven residents and eight senior neurosurgeons were recruited to test our model. The participants reported that the size and anatomy of the elements were very similar to real structures. The model was helpful for training neuroendoscopic 3D perception and navigation. CONCLUSIONS: We developed an endoscopic third ventriculostomy training model using 3D printing technology that provides anatomical precision and a realistic simulation. We hope our model can provide an indispensable tool for young neurosurgeons to gain operative experience without exposing patients to risk.

Degenerative Grade 3 Spondylolisthesis Management: A Case Report and Literature Review.

Degenerative spine disorders are very common in the aging population. Degenerative spondylolisthesis is a relatively uncommon cause of chronic back pain in these patients. We present a case of high-grade spondylolisthesis managed with posterior lumbar interbody fusion (PLIF) and reduction of the listhesis with excellent results. A 56-year-old woman presented with chronic lower back pain managed as an outpatient for over 5 months with no relief. She had no history of trauma or risk factors for malignancy. Lumbosacral CT showed Meyerding grade 3 anterolisthesis of the fifth lumbar vertebra with complete L5-S1 disc collapse and bilateral spondylolysis. An MRI confirmed the findings. There was no spinal canal stenosis. The patient was managed with L4-L5-S1 transpedicular fixation and L5-S1 interbody cage with reduction of the listhesis. The patient had an incidental intraoperative dural tear which was repaired primarily and a wound drain was kept for 5 days without complications. The patient was ambulating by day 5 and was discharged without complications on day 10. Degenerative spondylolisthesis can cause chronic back pain with or without a history of trauma. Although no specific clinical features exist for this condition, it should be suspected in elderly patients even in the absence of a history of trauma. Surgical management in high-grade spondylolisthesis is indicated with interbody fixation and reduction.

Surgical Management of Lumbar Hardware Failure Due to Recurrent Postoperative Spondylodiscitis: Case Report.

Spondylodiscitis is a rare bacterial infection of the vertebrae and intervertebral discs that causes inflammation and follows a destructive course. When conservative management fails, surgical management requires immediate debridement of the infective focus, with decompression and stabilization through a ventral approach. The most frequently involved locations are the lumbar spine (58%), thoracic (30%), and cervical (11%) regions. Gram-positive organisms such as Staphylococcus aureus and Streptococcus species are the most commonly isolated organisms (67% and 24%, respectively). Pathophysiologically, infectious spondylodiscitis begins in the anterior portion of the vertebral body, due to its rich vascular supply, and then spreads to the rest of the vertebral body and along the medullary spaces. In this study, we report the management of recurrent lumbar postoperative spondylodiscitis with transforaminal lumbar interbody fusion (TLIF) hardware failure in a 62-year-old female.

Three-Dimensional Plastic Modeling on Bone Frames for Cost-Effective Neuroanatomy Teaching.

Cadaveric models remain an essential part of medical training across all specialties. Due to their scarcity, high costs, and possible health hazards, there is a need for more accessible and affordable alternatives, especially in low-resource settings. We introduce cost-effective and easily replicable three-dimensional (3D) printed models to help democratize access to hands-on neuroanatomy education. Silicone-based glue is applied on the surface of a 3D-printed or cadaveric bone frame. Using plastiline on a 3 mm 3D acrylonitrile butadiene styrene pen, the desired anatomical structure is printed on the bone frame. A heat gun is used to smoothen the plastic edges. The structure can then be painted according to its appearance in the real anatomy. Using this technique, we successfully generated a variety of anatomical models to study the cerebrovascular anatomy, the course of the cranial nerves in relation to the skull base, and extracranial structures including the spine. Procurement and conservation of cadaveric specimens can be cumbersome. Our model may be an affordable and easily replicable approach to bridging the gap in anatomy education between low- and high-resource facilities.

Microsurgical Wiltse Paraspinal Approach Using a Low-Budget Exoscope.

Access to microneurosurgical care in low- and middle-income countries remains limited mainly due to a lack of equipment. High purchasing and maintenance costs hinder the use of operating microscopes in low-resource facilities. The authors present an improved version of their previously introduced low-cost exoscope to achieve high magnification and illumination in low-resource environments. The setup included a 48-megapixel two-dimensional digital microscope camera, a wide field C-mount lens, ring light, and a two-link cantilever with a screw terminal. The surgical field was projected to a portable 17.3-inch 2K resolution monitor. Ten patients underwent exoscope-assisted transforaminal lumbar interbody fusion via the Wiltse paraspinal approach. The simple construction allowed a fast and intuitive preoperative setup. The in-plane switching type display provided a clear and bright image regardless of the viewing angle. The two-link arm of the cantilever allowed smooth positioning of the camera, overcoming the cumbersome up and down movements needed to zoom in and out with the previous prototype. Industrial microscope cameras are effective low-budget alternatives to conventional operating microscopes in lumbar microdiscectomy. The improved system is superior compared to the authors' previous prototype with regard to affordability, image quality, and adjustability of position and angle.

Thoracic Percutaneous Vertebroplasty for the Treatment of Vertebral Hemangioma in a Patient With Forestier's Disease: A Case Report.

Percutaneous vertebroplasty consists of an injection of polymethylmethacrylate in the vertebral body, with the aim of reinforcing the bone structure, preventing vertebral collapse, and achieving analgesic and antitumor effects. It is used in the treatment of patients with aggressive vertebral hemangiomas, as well as compression fractures of traumatic etiology and pathological fractures. Forestier's disease is also known as senile ankylosing hyperostosis of the spine. It is characterized by hypertrophy of the anterior longitudinal ligament. Depending on the most prominent place of ossification of this ligament, its clinical symptoms vary, with intense pain being the most relevant. Here, we present the case of a 73-year-old female with complaints of intense, constant pain that did not improve with conservative treatment, located at the level of the Th4Th10 vertebrae, radiating along the intercostal spaces, with eight months of evolution with muscular hypertonism. Magnetic resonance imaging of the thoracic spine showed osteochondritis of the thoracic spine and right-sided scoliosis. For hemangioma of the Th6 vertebral body, the patient was referred to the vertebrology department, where she was admitted to undergo percutaneous vertebroplasty of the affected level under fluoroscopic control. In this study, we report the use of percutaneous vertebroplasty as a minimally invasive treatment in a patient with Forestier's disease, obtaining excellent results, rapid recovery, and minimal hospitalization time, without having to subject the patient to major surgery.