Frequency of Locator Legacy Insert Changes With Implant Overdentures in a UK Population.

PURPOSE: To determine the frequency of insert changes for combined maxillary and mandibular implant overdentures (IOD) using the Locator Legacy system. A secondary objective was to assess the survival of dental implants with IODs. MATERIALS AND METHODS: This retrospective audit reviewed clinical records with up to 12 years follow up from 785 patients who received IODs using the Locator system at a dental hospital. From these, 151 had a combined maxillary opposed by a mandibular IOD and from this, 37 had data retrieved using a minimum data set. The frequency of insert change was recorded and descriptive analysis was provided by means and standard deviations for continuous variables. Frequencies of categorical values were reported as percentages. RESULTS: 222 implants were placed on 21 men, 16 women with a mean age 67.5 years (SD 8.8). All patients were reviewed at least once. Maxillary and mandibular IODs experienced 1.9 (SD 2.0) and 1.2 (SD 1.2) mean insert changes per patient, respectively. The mean time (SD) between initial and first insert change for maxillary and mandibular IODs was 3.4 months (SD 3.2) and 6.4 months (SD 7.2) and between the first and second insert change was 9.9 months (SD 9.0) and 10.0 months (SD 8.3), respectively. Implant failure was 21.6% and 2.7% in the maxilla and mandible respectively. CONCLUSIONS: Clinicians should anticipate the first insert change around 3 months for maxillary IOD and 6 months for mandibular IOD. Subsequently, the second insert change to be around 10 months for both maxillary and mandibular IODs.

Pilot clinical study to evaluate the efficacy of a professionally delivered high fluoride varnish on erosive tooth wear in an in-situ model.

OBJECTIVES: The aim for this pilot study was to investigate the effect of a sodium fluoride varnish on step height measured by a profilometer from human enamel worn by healthy volunteers with a novel in situ/ex vivo erosion design. METHOD: Healthy volunteers aged 18-70 years wore a palatal splint containing 8 human enamel samples and underwent two 3-day treatment periods for 6 h a day with a varnish containing sodium fluoride at 22,600 ppm and the control with the same ingredients but without fluoride. Each splint contained 4 polished and 4 unpolished samples. The interventions were applied to the surface of the enamel samples in randomised order, removed after 6 h, then immersed ex-vivo in 1 %, pH 2.7 citric acid for 2 min, repeated 4 times a day, over 2 days. Measurements of enamel were assessed blindly by microhardness on day 2 and by non-contact laser profilometry on day 3 for the two treatments. RESULTS: 24 volunteers, 2 males and 22 females aged 27-54 years, were screened and recruited. The delta microhardness, from polished samples removed at the end of day 2, for the control and fluoride treatment was 95.7 (22.9) kgf/mm2 and 123.7 (28.9) kgf/mm2, respectively (p < .005). The mean (SD) step height for the control polished enamel surfaces was 3.67 (2.07) µm and for the fluoride varnish was 1.79 (1.01) µm (p < .0005). The control unpolished enamel surfaces had a mean 2.09 (1.53) µm and the fluoride varnish was 2.11 (1.53) µm but no statistical difference was detected. CONCLUSIONS: The results from this pilot study, utilizing an in-situ model where enamel was exposed to acid over the course of 2 days, demonstrated that a high fluoride varnish containing sodium fluoride at 22,600 ppm prevented erosive wear compared to a control on the polished enamel surfaces. CLINICAL SIGNIFICANCE: Intra-oral study demonstrated that a high fluoride varnish containing sodium fluoride at 22,600 ppm reduced erosive tooth wear.

Use of polyvinyl siloxane impressions to monitor sub-5-µm erosive tooth wear on unpolished enamel.

STATEMENT OF PROBLEM: Whether polyvinyl siloxane impressions are capable of reproducing 5-µm changes on natural freeform enamel and potentially enabling clinical measurements of early surface changes consistent with wear of teeth or materials is unclear. PURPOSE: The purpose of this in vitro study was to investigate and compare polyvinyl siloxane replicas with direct measurements of sub-5-µm lesions on unpolished human enamel lesions by using profilometry, superimposition, and a surface subtraction software program. MATERIAL AND METHODS: Twenty ethically approved unpolished human enamel specimens were randomized to a previously reported cyclic erosion (n=10) and erosion and abrasion (n=10) model to create discrete sub-5-µm lesions on the surface. Low viscosity polyvinyl siloxane impressions were made of each specimen before and after each cycle and scanned by using noncontacting laser profilometry and viewed with a digital microscopy and compared with direct scanning of the enamel surface. The digital maps were then interrogated with surface- registration and subtraction workflows to extrapolate enamel loss from the unpolished surfaces by using step-height and digital surface microscopy to measure roughness. RESULTS: Direct measurement revealed chemical loss of enamel at 3.4 ±0.43 µm, and the polyvinyl siloxane replicas were 3.20 ±0.42 µm, respectively. For chemical and mechanical loss direct measurement was 6.12 ±1.05 µm and 5.79 ±1.06 µm for the polyvinyl siloxane replica (P=.211). The overall accuracy between direct and polyvinyl siloxane replica measurements was 0.13 +0.57 and -0.31 µm for erosion and 0.12 +0.99 and -0.75 µm for erosion and abrasion. Surface roughness and visualization with digital microscopy provided confirmatory data. CONCLUSIONS: Polyvinyl siloxane replica impressions from unpolished human enamel were accurate and precise at the sub-5-µm level.

Frequency of Four-dimensional Oral Health Problems across Dental Fields - a Comparative Survey of Slovenian and International Dentists.

OBJECTIVES: To compare the frequency of patients' oral health problems and prevention needs among Slovenian and international dentists with the aim to validate the four oral health-related quality of life (OHRQoL) dimensions across six clinical dental fields in all World Health Organization (WHO) regions. METHODS: An anonymous electronic survey in the English language was designed using Qualtrics software. A probability sampling for Slovenia and a convenience sampling strategy for dentist recruitment was applied for 31 countries. Dentists engaged in six dental fields were asked to categorize their patients' oral health problems and prevention needs into the four OHRQoL dimensions (Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact). Proportions of patients' problems and prevention needs were calculated together with the significance of Slovenian and international dentists' differences based on dental fields and WHO regions. RESULTS: Dentists (n=1,580) from 32 countries completed the survey. There were 223 Slovenian dentists (females: 68%) with a mean age (SD) of 41 (10.6) years and 1,358 international dentists (females: 51%) with a mean age (SD) of 38 (10.4). Pain-related problems and prevention needs were the most prevalent among all six dental fields reported by dentists; Slovenian (37%) and 31 countries (45%). According to Cohen, differences between Slovenia, the broader European Region, and 31 countries were considered non-significant (<0.1). CONCLUSION: According to the dentists' responses, the frequency of patients' oral health problems and prevention needs are proportionate between Slovenia and 31 countries, regionally and globally. The four OHRQoL dimensions can be considered universal across all dental fields.

Pediatric patients' reasons for visiting dentists in all WHO regions.

BACKGROUND: Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact are the four oral health-related quality of life (OHRQoL) dimensions (4D) or areas in which oral disorders impact pediatric patients. Using their dentists' assessment, the study aimed to evaluate whether pediatric dental patients' oral health concerns fit into the 4D of the Oral Health-Related Quality of Life (OHRQoL) construct. METHODS: Dentists who treat children from 32 countries and all WHO regions were selected from a web-based survey of 1580 international dentists. Dentists were asked if their pediatric patients with current or future oral health concerns fit into the 4D of the Oral Health-Related Quality of Life (OHRQoL) construct. Proportions of all pediatric patients' oral health problems and prevention needs were computed. FINDINGS: Data from 101 dentists treating children only and 523 dentists treating children and adults were included. For 90% of pediatric patients, their current oral health problems fit well in the four OHRQoL dimensions. For 91% of oral health problems they intended to prevent in the future were related to these dimensions as well. Both numbers increased to at least 96% when experts analyzed dentists´ explanations of why some oral health problems would not fit these four categories. CONCLUSIONS: The study revealed the four fundamental components of dental patients, i.e., the four OHRQoL dimensions (Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact) are also applicable for pediatric patients, regardless of whether they have current or future oral health concerns, and should be considered when measuring OHRQoL in the pediatric dental patient population.

Why Patients Visit Dentists - A Study in all World Health Organization Regions.

OBJECTIVE: The dimensions of oral health-related quality of life (OHRQoL) Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact are the major areas where patients are impacted by oral diseases and dental interventions. The aim of this study was to evaluate whether dental patients' reasons to visit the dentist fit the 4 OHRQoL dimensions. METHODS: Dentists (N = 1580) from 32 countries participated in a web-based survey. For their patients with current oral health problems, dentists were asked whether these problems were related to teeth, mouth, and jaws' function, pain, appearance, or psychosocial impact or whether they do not fit the aforementioned 4 categories. Dentists were also asked about their patients who intended to prevent future oral health problems. For both patient groups, the proportions of oral health problems falling into the 4 OHRQoL dimensions were calculated. RESULTS: For every 100 dental patients with current oral health problems, 96 had problems related to teeth, mouth, and jaws' function, pain, appearance, or psychosocial impact. For every 100 dental patients who wanted to prevent future oral health problems, 92 wanted to prevent problems related to these 4 OHRQoL dimensions. Both numbers increased to at least 98 of 100 patients when experts analyzed dentists' explanations of why some oral health problems would not fit the four dimension. For the remaining 2 of 100 patients, none of the dentist-provided explanations suggested evidence against the OHRQoL dimensions as the concepts that capture dental patients' suffering. CONCLUSION: Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact capture dental patients' oral health problems worldwide. These 4 OHRQoL dimensions offer a psychometrically sound and practical framework for patient care and research, identifying what is important to dental patients.

The impact of e-training on tooth wear assessments using the BEWE.

OBJECTIVE: To investigate the impact of an e-training resource with the consistency of tooth wear scoring using the Basic Erosive Wear Examination (BEWE). METHODS: Gold standard (GS) BEWE scores were attained from a trained examiner using the photographic and dental cast records for three conveniently selected cases representing low, medium and severe tooth wear. Four successive cohorts of first year post-graduate students, (n = 76, mean age, 35.4 years) undertook a training exercise. Each was given written guidance on using the BEWE. Following e-training, scoring was repeated, and the results expressed as mean, confidence Intervals, (95% ci) and p-values (values <0.05 were considered statistically significant). RESULTS: The e-training resulted in a mean improvement in the agreement with the GS score by 15.6% and 15.3%, using the records of the medium and severe tooth wear cases, (cumulative BEWE scores of 13 and 15 respectively). Post-training reductions were reported, with the mean number of disagreements with the GS and the mean change in the size of disagreement with the GS scores with records for the medium and severe cases (p = 0.001 and p < 0.001). No significant difference was revealed for the low wear case. CONCLUSION: e-training resulted in significant improvements in scoring BEWE, compared to the gold standard. CLINICAL RELEVANCE: Online training resources can help provide training with the BEWE.

An in-situ pilot study to investigate the native clinical resistance of enamel to erosion.

OBJECTIVES: To investigate the differences in susceptibility of the surface of native and polished enamel to dietary erosion using an in-situ model. METHODS: Thirty healthy volunteers (n = 10 per group) wore mandibular appliances containing 2 native and 2 polished enamel samples for 30 min after which, the samples were exposed to either an ex-vivo or in-vivo immersion in orange juice for 5, 10 or 15 min and the cycle repeated twice with an hour's interval between them. Samples were scanned with a non-contacting laser profilometer and surface roughness was extracted from the data, together with step height and microhardness change on the polished enamel samples. RESULTS: All volunteers completed the study. For native enamel there were no statistical difference between baseline roughness values versus post erosion. Polished enamel significantly increased mean (SD) Sa roughness from baseline for each group resulting in roughness change of 0.04 (0.03), 0.06 (0.04), 0.04 (0.03), 0.06 (0.03), 0.08 (0.05) and 0.09 (0.05) µm respectively. With statistical differences between roughness change 45 min in-vivo versus 45 min ex-vivo (p < 0.05). Microhardness significantly decreased for each polished group, with statistical differences in hardness change between 30 min in-vivo versus 30 min ex-vivo (p < 0.05), 45 min in-vivo versus 30 min ex-vivo (p < 0.01), 45 min in-vivo versus 45 min ex-vivo (p < 0.01). CONCLUSIONS: The native resistance to erosion provided clinically is a combination of the ultrastructure of outer enamel, protection from the salivary pellicle and the overall effects of the oral environment. CLINICALTRIALS. GOV IDENTIFIER: NCT03178968. CLINICAL SIGNIFICANCE: This study demonstrates that outer enamel is innately more resistant to erosion which is clinically relevant as once there has been structural breakdown at this level the effects of erosive wear will be accelerated.

Measurement of surface roughness changes of unpolished and polished enamel following erosion.

OBJECTIVES: To determine if Sa roughness data from measuring one central location of unpolished and polished enamel were representative of the overall surfaces before and after erosion. METHODS: Twenty human enamel sections (4x4 mm) were embedded in bis-acryl composite and randomised to either a native or polishing enamel preparation protocol. Enamel samples were subjected to an acid challenge (15 minutes 100 mL orange juice, pH 3.2, titratable acidity 41.3mmol OH/L, 62.5 rpm agitation, repeated for three cycles). Median (IQR) surface roughness [Sa] was measured at baseline and after erosion from both a centralised cluster and four peripheral clusters. Within each cluster, five smaller areas (0.04 mm2) provided the Sa roughness data. RESULTS: For both unpolished and polished enamel samples there were no significant differences between measuring one central cluster or four peripheral clusters, before and after erosion. For unpolished enamel the single central cluster had a median (IQR) Sa roughness of 1.45 (2.58) µm and the four peripheral clusters had a median (IQR) of 1.32 (4.86) µm before erosion; after erosion there were statistically significant reductions to 0.38 (0.35) µm and 0.34 (0.49) µm respectively (p<0.0001). Polished enamel had a median (IQR) Sa roughness 0.04 (0.17) µm for the single central cluster and 0.05 (0.15) µm for the four peripheral clusters which statistically significantly increased after erosion to 0.27 (0.08) µm for both (p<0.0001). CONCLUSION: Measuring one central cluster of unpolished and polished enamel was representative of the overall enamel surface roughness, before and after erosion.

Retention of implant-supported overdentures at different implant angulations: comparing Locator and ball attachments.

OBJECTIVES: To assess the effect of implant angulation on the retention of two different attachment systems for implant-supported overdentures after a simulated fatigue period of 5.5 years. MATERIAL AND METHODS: Two test set-ups were constructed. A two-implant mandibular implant-supported overdenture design was simulated using acrylic resin blocks to support implant replicas (Model 1 and Model 2). The replicas were set up in the canine regions (22-mm inter-implant distance). In Model 1, the implants were parallel (0° to the vertical axis) and in Model 2 they were divergent (20° to the vertical axis). The Locator and the ball attachment systems were tested at both set-ups. A simulated fatigue period of 5.5 years that equated to 10,000 cycles of insertion and removal of the denture was used. Retention values for each attachment system at each angulation set-up were measured at baseline, every 500 cycles until 4000 cycles and then every 1000 cycles. RESULTS: After simulated fatigue, the retention for both systems at both set-ups reduced. The Locator system reduced from 108.9 to 20.2 N in the parallel set-up and from 82.3 to 17.3 N in the divergent set-up. For the ball system, the retention reduced from 56.2 to 46 N when parallel and from 45.7 to 40.7 N when divergent. CONCLUSION: Both attachment systems showed a significant reduction in retention after simulated fatigue at both parallel and divergent set-ups. The change in implant angulation caused a significant reduction in retention for the ball attachment system only, although this was still higher at the end of testing than the Locator attachment system. The Locators also had a significantly faster rate of loss of retention at both set-ups. Clinically, this may indicate that the ball attachments may perform better with divergent implants.

Effect of Model Variables on in vitro Erosion.

The aim of this study was to investigate the effects of tooth type (molar/premolar), tooth surface (buccal/lingual), smear layer or no smear layer, storage of specimens in deionised water, mode and speed of agitation, and rinsing method between cycles on mean step height loss and Knoop microhardness (KHN) change. Polished human enamel specimens embedded in acrylic resin were prepared from sound permanent molar and premolar tooth surfaces. A 0.3% (pH 3.2) solution of citric acid was used to erode the specimens, in a cycling procedure, consisting of 10 min immersion followed by rinsing in deionised water for 30 s with a spray bottle, for 5 cycles. The specimens were analysed with a non-contact white light profilometer and KHN. Molar teeth (148.99±24.49 KHN) and buccal surfaces (155.62±30.35 KHN) produced significantly less microhardness change compared to premolar (186.40±20.74 KHN) and lingual surfaces (179.76±23.21 KHN; p<0001). The effect of storage and rinsing showed little difference in mean step height loss (<1 µm) and microhardness change. With no smear layer a significantly lower mean step height loss and microhardness change (p<0.001) was observed. Agitation was performed with Orbital, Gyro and See-Saw rockers at 30, 40, 60, and 70 rpm. The mean step height loss was largest for See-Saw at 70 rpm (11.73±0.91 µm) and lowest for Orbital at 30 rpm (2.76±1.12 µm). A statistical difference was found between all types of agitation and speeds (p<0.001). In conclusion, this study has shown that the variables investigated here have a significant impact on the measurable outcome, highlighting the importance of accurate and detailed method sections.

Intrusion of supraerupted maxillary molar using a high interim restoration on the defective opposing tooth: a clinical report.

Wear, extraction, or fracture of all or part of a mandibular first molar can lead to the supraeruption of the opposing maxillary molar, resulting in occlusal interference and lack of restoration space. This report describes a method to gain sufficient vertical space for permanent restoration. A direct composite resin restoration was placed on the occlusal surface of a lower molar, intentionally making the interim restoration high and intruding the maxillary molar. After 6 weeks, the extruded tooth returned to the desired position, and functional occlusion was restored, enabling a ceramic restoration on the mandibular molar. No marked adverse sensory reaction was reported in this therapeutic process, and no deleterious signs were detected in the teeth, periodontium, or temporomandibular joints. The simple treatment type was effective, noninvasive, and time saving, while also preserving maximum tooth structures.

The effect of single-application fluoride treatment on simulated gastric erosion and erosion-abrasion of enamel in vitro.

PURPOSE: To compare single-application fluoride formulations on enamel erosion and erosion-abrasion in vitro. MATERIALS AND METHODS: Enamel specimens were pretreated with either sodium, tin, titanium, or sodium/calcium fluoride and subjected to either an erosion model or an erosion-abrasion model, after which optical profilometry was used to measure enamel step height loss. RESULTS: For erosion, the titanium fluoride (P < .001) reduced enamel loss, whereas the calcium, tin, and sodium treatments showed no significant effects (P > .05). For erosion-abrasion, the titanium fluoride increased enamel loss in comparison to control (P < .001). CONCLUSIONS: Titanium fluoride has differing effects on enamel loss from erosion and erosion-abrasion models.

Measuring enamel erosion: a comparative study of contact profilometry, non-contact profilometry and confocal laser scanning microscopy.

OBJECTIVES: To compare three instruments for their ability to quantify enamel loss after acid erosion. METHODS: 6 randomized parallel groups of bovine enamel samples were subjected to citric acid (higher acidity) or orange juice (lower acidity) erosion and remineralisation in a cycling model. Two protected shoulders were created on each of the samples using tape, to serve as reference for analysis. The time of exposure to each acid was varied, along with presence or absence of agitation. After treatment, samples were measured on 3 instruments capable of measuring step height: a contact profilometer (CP); a non-contact profilometer (NCP); and a confocal laser scanning microscope (CLSM) by three different examiners. Additionally, 3D (volume) step height was also measured using the CLSM. RESULTS: Increasing acid concentration and exposure time resulted in greater erosion, as did agitation of samples while in acid solution. All instruments/methods identified the same statistically significant (p<0.05) pair-wise differences between the treatments groups. Further, all four methods exhibited strong agreement (Intra-class correlation ≥ 0.96) in erosion level and were highly correlated, with correlations of 0.99 or higher in all cases. SIGNIFICANCE: All instruments/methods used in this study produced very similar conclusions with regard to ranking of enamel loss, with data showing very high agreement between instruments. All instruments were found to be equally suited to the measurement of enamel erosion.

The dimensional stability of impression materials and its effect on in vitro tooth wear studies.

OBJECTIVES: To assess the dimensional stability of 8 impression materials over 12 weeks relevant to in vitro tribology studies. METHODS: Ten impressions from eight impression materials were taken of a metal block (ADA block) conforming to the American Dental Association specification for impression materials and of another metal block (custom block) which allowed measurements over a larger surface area. The impressions and blocks were scanned on a non-contacting laser profilometer (Taicaan® - Southampton, UK) and using surface metrology software Boddies® (Taicaan® - Southampton, UK) measurements were made at 24h, 2, 4, 8 and 12 weeks. The impression materials tested were [1] Aquasil®, [2] Aquasil® DECA, [3] Affinis®, [4] Express®, [5] Extrude®, [6] Impregum®, [7] President® and [8] Take 1®. RESULTS: Seven addition silicones and one polyether [6] were tested. [2] and [6] were monophasic, the rest were putty-wash. The results from impressions of the ADA block showed that all materials contracted compared to measurements obtained directly from the block [1] expanded over time (+31.5 µm) (p<0.05). The results from the custom block showed that all materials contracted compared to direct measurements of the block. [4] and [7] expanded over time (+62 µm and +63.8 µm respectively). [8] contracted over time (-54.7 µm) (p<0.05). SIGNIFICANCE: No material showed linear changes >1.5% and were stable for 12 weeks. Nevertheless, the range of changes would affect tribology studies were cut-offs lesser than the reported changes are selected. All impressions should be processed after similar time delays to reduce the errors introduced by dimensional changes.

A comparison of two-dimensional and three-dimensional measurements of wear in a laboratory investigation.

OBJECTIVES: The aim of this research was to compare two-dimensional (2D) and three-dimensional (3D) tooth measuring techniques after subjecting enamel samples to tooth wear in vitro on an erosion-abrasion model. METHOD: 80 polished mid-coronal enamel sections were subjected to 10 wear cycles. Each cycle consisted of remineralization for 2 h in artificial saliva, followed by 10 min immersion in one of four acidic fruit drinks or distilled water and finally toothbrush abrasion with a non-fluoridated tooth paste. The resulting wear scars were measured using 2D and 3D techniques using surface matching software. RESULTS: The 2D step heights measurements from the exposure to the four acidic drinks showed no statistically significant differences (median wear range=22.4-32.5 microm) between them (p=0.99) but there were differences with distilled water (median wear=10.0 microm) (p=0.01). The 3D measurements showed that two drinks produced more wear compared to the others and water when the whole surface and volume exposed to wear was accounted for (p=0.01). SIGNIFICANCE: The difference in data from the two techniques showed that 3D measurements gave a more accurate assessment of the impact of the wear regime.

The prevalence of cervical tooth wear in patients with bruxism and other causes of wear.

PURPOSE: The aim of this study was to investigate the prevalence of cervical wear lesions in three groups of patients: bruxists, combined tooth wear, and controls. The hypothesis was that those subjects presenting with bruxism were more likely to develop cervical wear lesions. MATERIALS AND METHODS: Of 119 subjects, 31 were bruxists with a mean age 48.7 years [standard deviation (SD): 11.6]; 22 had combined wear, aged 43.5 years (14.2); and 66 controls aged 44.9 years (17.0). The clinical appearance of the tooth wear was used to recruit subjects to the bruxist and combined tooth wear groups. Control subjects were randomly selected from those attending for routine dental examination at two general dental practices. A tooth wear index (TWI) was used by two trained examiners to record the severity of wear in each group. RESULTS: There was a statistically significant difference between the controls and both the bruxist and combined tooth wear groups for wear on all surfaces (p < or = 0.001). There was no significant difference between the bruxist and the combined tooth wear group for wear on any surface. There was a statistically significant difference between the control group and both the bruxist and the combined tooth wear group for the severity of cervical wear (p < or = 0.005), but no difference between the bruxist and combined tooth wear groups. There was also no statistical difference in the number of cervical lesions between the groups. CONCLUSIONS: In this study, the likely cause of cervical tooth wear was multifactorial.

Prevalence of tooth wear in adults.

PURPOSE: The aim of this study was to investigate data on the prevalence of tooth wear in adults and assess possible correlations using a systematic review. MATERIALS AND METHODS: A search of the literature, using PubMed and the Cochrane Library, from January 1980 to July 2007 was made using keywords "tooth + wear"; "dental + attrition + prevalence"; "dental + wear + prevalence"; "erosion + prevalence"; and "abrasion + prevalence". References were independently screened for inclusion and exclusion by two investigators and Cohen Kappa was used as the measure of agreement. Data were collected and converted into the Smith and Knight Tooth Wear Index. RESULTS: One hundred eighty-six references were initially selected and subjected to the systematic review procedure; 13 survived the inclusion procedure. Four articles were suitable for regression analysis at tooth level (R2 = .593) and 3 at subject level (R2 = .736), using "age and age squared" and "age squared" as variables, respectively. Six studies reported males having significantly more tooth wear than females. CONCLUSION: The predicted percentage of adults presenting with severe tooth wear increases from 3% at the age of 20 years to 17% at the age of 70 years. Increasing levels of tooth wear are significantly associated with age.

Surface roughness of impression materials and dental stones scanned by non-contacting laser profilometry.

OBJECTIVE: To analyze differences in the way dental materials digitize on a non-contacting laser profilometer (NCLP). METHODS: Three Type IV dental stones and 15 impression materials were mixed according to the manufacturer's instructions and expressed against a glass block to record its surface characteristics. From each material an area of 6 x 40 mm was scanned on the NCLP and the Ra, Rq and Rt roughness values measured from 20 randomly selected transverse profiles. The surface of the impression materials was subsequently poured in Moonstone (Bracon Ltd., Etchingham, England) dental stone and the same roughness values obtained from these casts. Differences in roughness values from the dental materials were compared using ANOVA and differences in roughness between impression materials and the Moonstone casts compared using paired t-tests. RESULTS: There were significant differences in roughness values between individual materials within each type (impression material or dental stone) (p<0.05). The roughness of the dental stones varied between Ra=0.87 and 0.99 microm, Rq=1.09 and 1.23 microm, and Rt=5.70 and 6.51 microm. The roughness values of the impression materials varied between Ra=0.75 and 4.56 microm; Rq=0.95 and 6.27 microm and Rt=4.70 and 39.31 microm. Darker materials showed higher roughness values compared to lighter materials (p<0.05). The roughness of the Moonstone casts varied between Ra=0.80 and 0.98 microm; Rq=1.01 and 1.22 microm, and Rt=5.04 and 6.38 microm. Roughness values of some impression materials were statistically significantly lower when the surface was reproduced in Moonstone (p<0.01). SIGNIFICANCE: Digitization of dental materials on optical profilometers was affected by color and transparency.