Multifunctional 3D-Printed Magnetic Polycaprolactone/Hydroxyapatite Scaffolds for Bone Tissue Engineering.

Multifunctional and resistant 3D structures represent a great promise and a great challenge in bone tissue engineering. This study addresses this problem by employing polycaprolactone (PCL)-based scaffolds added with hydroxyapatite (HAp) and superparamagnetic iron oxide nanoparticles (SPION), able to drive on demand the necessary cells and other bioagents for a high healing efficiency. PCL-HAp-SPION scaffolds with different concentrations of the superparamagnetic component were developed through the 3D-printing technology and the specific topographical features were detected by Atomic Force and Magnetic Force Microscopy (AFM-MFM). AFM-MFM measurements confirmed a homogenous distribution of HAp and SPION throughout the surface. The magnetically assisted seeding of cells in the scaffold resulted most efficient for the 1% SPION concentration, providing good cell entrapment and adhesion rates. Mesenchymal Stromal Cells (MSCs) seeded onto PCL-HAp-1% SPION showed a good cell proliferation and intrinsic osteogenic potential, indicating no toxic effects of the employed scaffold materials. The performed characterizations and the collected set of data point on the inherent osteogenic potential of the newly developed PCL-HAp-1% SPION scaffolds, endorsing them towards next steps of in vitro and in vivo studies and validations.

Clinical, Histological, and Molecular Features of Solitary Fibrous Tumor of Bone: A Single Institution Retrospective Review.

Primary solitary fibrous tumor (SFT) of the bone is extremely rare, with only few cases reported in the literature. We retrieved all cases of primary SFT of the bone treated at our institution and we assessed the morphology and the immunohistochemical and molecular features to investigate the clinical outcome of primary SFT of the bone and any clinical relevance of clinical and histological criteria of aggressiveness currently adopted for the soft tissues counterpart. Morphologically, 15 cases evidenced high cellularity, cytologic atypia, and foci of necrosis and were associated with more than 4 mitotic figures/10 HPF. Immunohistochemical analysis showed an expression of CD34 and of STAT6 immunopositivity in 95% and in 100% of cases, respectively. The presence of NAB2-STAT6 chimeric transcripts was found in 10 out of 12 cases in which RT-PCR analysis was feasible, whereas TERT promoter mutations analysis was feasible in 16 cases and only a C-to-T substitution in a heterozygous state was found in one DNA sample for the C228T genetic variant. P53 variants were assessed in 12 cases: 11 (91.6%) cases showed a variation, while in one case, no alteration was found. Disease-specific survival was 64% at 5 years and 49% at 10 years. Statistical analysis showed no correlation between survival and all the clinicopathological and molecular parameters evaluated. In conclusion, at difference to SFT of soft tissues, aggressive behavior of primary SFT of the bone seems to be independent from mitotic count or any other clinicopathological and molecular features.

A Roadmap of In Vitro Models in Osteoarthritis: A Focus on Their Biological Relevance in Regenerative Medicine.

Osteoarthritis (OA) is a multifaceted musculoskeletal disorder, with a high prevalence worldwide. Articular cartilage and synovial membrane are among the main biological targets in the OA microenvironment. Gaining more knowledge on the accuracy of preclinical in vitro OA models could open innovative avenues in regenerative medicine to bridge major gaps, especially in translation from animals to humans. Our methodological approach entailed searches on Scopus, the Web of Science Core Collection, and EMBASE databases to select the most relevant preclinical in vitro models for studying OA. Predicting the biological response of regenerative strategies requires developing relevant preclinical models able to mimic the OA milieu influencing tissue responses and organ complexity. In this light, standard 2D culture models lack critical properties beyond cell biology, while animal models suffer from several limitations due to species differences. In the literature, most of the in vitro models only recapitulate a tissue compartment, by providing fragmented results. Biotechnological advances may enable scientists to generate new in vitro models that combine easy manipulation and organ complexity. Here, we review the state-of-the-art of preclinical in vitro models in OA and outline how the different preclinical systems (inflammatory/biomechanical/microfluidic models) may be valid tools in regenerative medicine, describing their pros and cons. We then discuss the prospects of specific and combinatorial models to predict biological responses following regenerative approaches focusing on mesenchymal stromal cells (MSCs)-based therapies to reduce animal testing.

Regenerative Features of Adipose Tissue for Osteoarthritis Treatment in a Rabbit Model: Enzymatic Digestion Versus Mechanical Disruption.

Evaluating cell migration after cell-based treatment is important for several disorders, including osteoarthritis (OA), as it might influence the clinical outcome. This research explores migrating expanded-adipose stromal cells (ASCs) and adipose niches after enzymatic and mechanical processes. Bilateral anterior cruciate ligament transection induced a mild grade of OA at eight weeks in adult male New Zealand rabbits. ASCs, enzymatic stromal vascular fraction (SVF), and micro fragmented adipose tissue (MFAT) were intra-articularly injected in the knee joint. Assessments of cell viability and expression of specific markers, including CD-163 wound-healing macrophages, were done. Cell migration was explored through labelling with PKH26 dye at 7 and 30 days alongside co-localization analyses for CD-146. All cells showed good viability and high percentages of CD-90 and CD-146. CD-163 was significantly higher in MFAT compared to SVF. Distinct migratory potential and time-dependent effects were observed among cell-based treatments. At day 7, both ASCs and SVF migrated towards synovium, whereas for MFAT versus cartilage, a different migration pattern was noticed at day 30. The long-term distinct cell migration of ASCs, SVF, and MFAT open interesting clinical insights on their potential use for OA treatment. Moreover, the highest expression of CD-163 in MFAT, rather than SVF, might have an important role in directly mediating cartilage tissue repair responses.

Investigating the Role of Sustained Calcium Release in Silk-Gelatin-Based Three-Dimensional Bioprinted Constructs for Enhancing the Osteogenic Differentiation of Human Bone Marrow Derived Mesenchymal Stromal Cells.

Scaffold-based bone tissue engineering strategies fail to meet the clinical need to fabricate patient-specific and defect shape-specific, anatomically relevant load-bearing bone constructs. 3D bioprinting strategies are gaining major interest as a potential alternative, but design of a specific bioink is still a major challenge that can modulate key signaling pathways to induce osteogenic differentiation of progenitor cells, as well as offer appropriate microenvironment to augment mineralization. In the present study, we developed silk fibroin protein and gelatin-based conjugated bioink, which showed localized presence and sustained release of calcium. Presence of 2.6 mM Ca2+ ions within the bioink could further induce enhanced osteogenesis of Bone marrow derived progenitor cells (hMSCs) compared to the bioink without calcium, or same concentration of calcium added to the media, as evidenced by upregulated gene expression of osteogenic markers. This study generated unprecedented mechanistic insights on the role of fibroin-gelatin-CaCl2 bioink in modulating expression of several proteins which are known to play crucial role in bone regeneration as well as key signaling pathways such as ß-catenin, BMP signaling pathway, Parathyroid hormone-dependent signaling pathway, Forkhead box O (FOXO) pathway, and Hippo pathways in hMSC-laden bioprinted constructs.

Bone marrow concentrate and expanded mesenchymal stromal cell surnatants as cell-free approaches for the treatment of osteochondral defects in a preclinical animal model.

PURPOSE: To evaluate the regenerative potential of surnatants (SNs) from bone marrow concentrate (SN-BMC) and expanded mesenchymal stromal cells (SN-MSCs) loaded onto a collagen scaffold (SC) in comparison with cell-based treatments (BMC and MSCs) in an osteochondral (OC) defect model in rabbits. METHODS: OC defects (3 × 5 mm) were created in the rabbit femoral condyles and treated with SC alone or combined with SN-BMC, SN-MSCs, BMC, and MSCs. In control groups, the defects were left untreated. At three and six months, the quality of regenerated tissue was evaluated with macroscopic, histologic, microtomographic, and immunohistochemical assessments. The production of several immunoenzymatic markers was measured in the synovial fluid. RESULTS: All proposed treatments improved OC regeneration in comparison with untreated and SC-treated defects. Both BMC and MSCs showed a similar healing potential than their respective SNs, with the best performance exerted by BMC as demonstrated with macroscopic and histological scores and type I and II collagen results. CONCLUSIONS: SNs loaded onto SC exerted a positive effect on OC defect regeneration, underlying the biological significance of the trophic factors, thus potentially opening new opportunities for the use of cell-free-based therapies. BMC was confirmed to be the most beneficial treatment.

Three-Dimensional Bioprinting of Cartilage by the Use of Stem Cells: A Strategy to Improve Regeneration.

Cartilage lesions fail to heal spontaneously, leading to the development of chronic conditions which worsen the life quality of patients. Three-dimensional scaffold-based bioprinting holds the potential of tissue regeneration through the creation of organized, living constructs via a "layer-by-layer" deposition of small units of biomaterials and cells. This technique displays important advantages to mimic natural cartilage over traditional methods by allowing a fine control of cell distribution, and the modulation of mechanical and chemical properties. This opens up a number of new perspectives including personalized medicine through the development of complex structures (the osteochondral compartment), different types of cartilage (hyaline, fibrous), and constructs according to a specific patient's needs. However, the choice of the ideal combination of biomaterials and cells for cartilage bioprinting is still a challenge. Stem cells may improve material mimicry ability thanks to their unique properties: the immune-privileged status and the paracrine activity. Here, we review the recent advances in cartilage three-dimensional, scaffold-based bioprinting using stem cells and identify future developments for clinical translation. Database search terms used to write this review were: "articular cartilage", "menisci", "3D bioprinting", "bioinks", "stem cells", and "cartilage tissue engineering".

Short-Term Homing of Hyaluronan-Primed Cells: Therapeutic Implications for Osteoarthritis Treatment.

The evaluation of key factors modulating cell homing following injection can provide new insights in the comprehension of unsolved biological questions about the use of cell therapies for osteoarthritis (OA). The main purpose of this in vivo study was to investigate the biodistribution of an intra-articular injection of mesenchymal stromal cells (MSCs) and bone marrow concentrate (BMC) in a rabbit OA model and whether the additional use of sodium hyaluronate (HA) could modulate their migration and delay joint degeneration. OA was surgically induced in adult male New Zealand rabbits. A group of animals was used to test the biodistribution of labeled cells alone or with HA at 7 and 14 days to investigate cell migration. The efficacy of treatments was evaluated in other experimental groups at 2 months. Histology and immunohistochemistry for markers identifying anabolic and catabolic processes in the cartilage and meniscus, or macrophage subset population in the synovial membrane, were performed. Kruskal-Wallis test, followed by post hoc Dunn's test, and Spearman's rank-order correlation method were used. MSCs and BMC preferentially migrate toward tissue areas showing OA features in the meniscus and cartilage and in detail near inflammatory zones in the synovial membrane. The combination with HA contributed to boost cell migration toward articular cartilage. In general, both labeled cells combined with HA were found near cell cluster and fissures in the cartilage and meniscus, respectively, and close to areas of synovial membrane showing mainly anti-inflammatory macrophages. A promotion of joint repair was observed at different levels for all treatments, although BMC-HA treatment resulted as the best strategy to support joint repair. This last, displayed a good protein expression of type II collagen in the cartilage, as well as the presence of anti-inflammatory macrophages in the synovial membrane at 2 months from the treatment. Studies tracking cell biodistribution indicate that priming progenitor cells with HA modulated cell homing favoring not only attachment but also their integration within articular cartilage.

Scaffolds for Bone Tissue Engineering: State of the art and new perspectives.

This review is intended to give a state of the art description of scaffold-based strategies utilized in Bone Tissue Engineering. Numerous scaffolds have been tested in the orthopedic field with the aim of improving cell viability, attachment, proliferation and homing, osteogenic differentiation, vascularization, host integration and load bearing. The main traits that characterize a scaffold suitable for bone regeneration concerning its biological requirements, structural features, composition, and types of fabrication are described in detail. Attention is then focused on conventional and Rapid Prototyping scaffold manufacturing techniques. Conventional manufacturing approaches are subtractive methods where parts of the material are removed from an initial block to achieve the desired shape. Rapid Prototyping techniques, introduced to overcome standard techniques limitations, are additive fabrication processes that manufacture the final three-dimensional object via deposition of overlying layers. An important improvement is the possibility to create custom-made products by means of computer assisted technologies, starting from patient's medical images. As a conclusion, it is highlighted that, despite its encouraging results, the clinical approach of Bone Tissue Engineering has not taken place on a large scale yet, due to the need of more in depth studies, its high manufacturing costs and the difficulty to obtain regulatory approval. PUBMED search terms utilized to write this review were: "Bone Tissue Engineering", "regenerative medicine", "bioactive scaffolds", "biomimetic scaffolds", "3D printing", "3D bioprinting", "vascularization" and "dentistry".

Repair Potential of Matrix-Induced Bone Marrow Aspirate Concentrate and Matrix-Induced Autologous Chondrocyte Implantation for Talar Osteochondral Repair: Patterns of Some Catabolic, Inflammatory, and Pain Mediators.

OBJECTIVE: The low regenerative potential of cartilage contributed to the development of different cell therapies aimed to improve the clinical outcome in young patients with Osteochondral Lesions of the Talus (OLT). This study is designed to assess the regenerative potential of autologous matrix-induced Bone Marrow Aspirate Concentrate (mBMAC) and matrix-induced Autologous Chondrocyte Implantation (mACI) evaluating, on a small number of osteochondral biopsies, the expression of some catabolic, inflammatory, and pain mediators. DESIGN: Twenty-two patients with OLT were analyzed in this study; 7 were treated with mACI and 15 with mBMAC. Informed consent was obtained from all the patients. Clinical assessments were performed pre-operatively and at 12, 24, and 36 months after surgery using the American Orthopedic Foot and Ankle Society (AOFAS). Histology and immunohistochemistry were used to assess cartilage repair at 24 months. Data were analyzed using non-parametric Wilcoxon-Mann-Whitney and Spearman tests. RESULTS: A remarkable improvement in AOFAS score was noticed for both treatments up to 36 months; however, patients treated with mACI reported the best AOFAS score. Various degrees of tissue remodeling were observed by histological analysis for both cell strategies. However, mBMAC treatment showed a higher expression of some fibrous and hypertrophic markers compared to mACI group. A mild positivity for nerve growth factor, as pain mediator, was noticed for both treatments.M. CONCLUSIONS: Our findings demonstrated the best histological and clinical results following mACI treatment since different fibrotic and hypertrophic features were evident in the mBMAC group at 24-month follow-up.

Autologous Bone Marrow Concentrate in a Sheep Model of Osteoarthritis: New Perspectives for Cartilage and Meniscus Repair.

INTRODUCTION: Cell-based therapies are becoming a valuable tool to treat osteoarthritis (OA). This study investigated and compared the regenerative potential of bone marrow concentrate (BMC) and mesenchymal stem cells (MSC), both engineered with Hyaff(®)-11 (HA) for OA treatment in a sheep model. METHODS: OA was induced via unilateral medial meniscectomy. Bone marrow was aspirated from the iliac crest, followed by concentration processes or cell isolation and expansion to obtain BMC and MSC, respectively. Treatments consisted of autologous BMC and MSC seeded onto HA. The regenerative potential of bone, cartilage, menisci, and synovia was monitored using macroscopy, histology, immunohistochemistry, and micro-computed tomography at 12 weeks post-op. Data were analyzed using the general linear model with adjusted Sidak's multiple comparison and Spearman's tests. RESULTS: BMC-HA treatment showed a greater repair ability in inhibiting OA progression compared to MSC-HA, leading to a reduction of inflammation in cartilage, meniscus, and synovium. Indeed, the decrease of inflammation positively contributed to counteract the progression of fibrotic and hypertrophic processes, known to be involved in tissue failure. Moreover, the treatment with BMC-HA showed the best results in allowing meniscus regeneration. Minor healing effects were noticed at bone level for both cell strategies; however, a downregulation of subchondral bone thickness (Cs.Th) was found in both cell treatments compared to the OA group in the femur. CONCLUSION: The transplantation of BMC-HA provided the best effects in supporting regenerative processes in cartilage, meniscus, and synovium and at less extent in bone. On the whole, both MSC and BMC combined with HA reduced inflammation and contributed to switch off fibrotic and hypertrophic processes. The observed regenerative potential by BMC-HA on meniscus could open new perspectives, suggesting its use not only for OA care but also for the treatment of meniscal lesions, even if further analyses are necessary to confirm its healing potential at long-term follow-up.