Translating Cadaveric Injury Risk to Dummy Injury Risk at Iso-energy.

Injury risk assessment based on cadaver data is essential for informing safety standards. The common 'matched-pair' method matches energy-based inputs to translate human response to anthropometric test devices (ATDs). However, this method can result in less conservative human injury risk curves due to intrinsic differences between human and ATDs. Generally, dummies are stiffer than cadavers, so force and displacement cannot be matched simultaneously. Differences in fracture tolerance further influence the dummy risk curve to be less conservative under matched-pair. For example, translating a human lumbar injury risk curve to a dummy of equivalent stiffness using matched-pair resulted in a dummy injury risk over 80% greater than the cadaver at 50% fracture risk. This inevitable increase arises because the dummy continues loading without fracture to attenuate energy beyond the 'matched' cadaver input selected. Human injury response should be translated using an iso-energy approach, as strain energy is well associated with failure in biological tissues. Until cadaver failure, dummy force is related to cadaver force at iso-energy. Beyond cadaver failure, dummy force is related to cadaver force through failure energy. This method does not require perfect cadaver/dummy biofidelity and ensures that energy beyond cadaver failure does not influence the injury risk function.

The response of the pediatric head to impacts onto a rigid surface.

The study of pediatric head injury relies heavily on the use of finite element models and child anthropomorphic test devices (ATDs). However, these tools, in the context of pediatric head injury, have yet to be validated due to a paucity of pediatric head response data. The goal of this study is to investigate the response and injury tolerance of the pediatric head to impact. Twelve pediatric heads were impacted in a series of drop tests. The heads were dropped onto five impact locations (forehead, occiput, vertex and right and left parietal) from drop heights of 15 and 30 cm. The head could freely fall without rotation onto a flat 19 mm thick platen. The impact force was measured using a 3-axis piezoelectric load cell attached to the platen. Age and drop height were found to be significant factors in the impact response of the pediatric head. The head acceleration (14%-15 cm; 103-30 cm), Head Injury Criterion (HIC) (253%-15 cm; 154%-30 cm) and impact stiffness (5800%-15 cm; 3755%-30 cm) when averaged across all impact locations increased with age from 33 weeks gestation to 16 years, while the pulse duration (66%-15 cm; 53%-30 cm) decreased with age. Increases in head acceleration, HIC and impact stiffness were also observed with increased drop height, while pulse duration decreased with increased drop height. One important observation was that three of the four cadaveric heads between the ages of 5-months and 22-months sustained fractures from the 15 cm and 30 cm drop heights. The 5-month-old sustained a right parietal linear fracture while the 11- and 22-month-old sustained diastatic linear fractures.

The response of the adult and ATD heads to impacts onto a rigid surface.

Given the high incidence of TBI, head injury has been studied extensively using both cadavers and anthropomorphic test devices (ATDs). However, few studies have benchmarked the response of ATD heads against human data. Hence, the objective of this study is to investigate the response of adult and ATD heads in impact, and to compare adult Hybrid III head responses to the adult head responses. In this study, six adult human heads and seven ATD heads were used to obtain impact properties. The heads were dropped from both 15cm and 30cm onto five impact locations: right and left parietal, forehead, occiput and vertex. One set of drops were performed on the human heads and up to four sets were carried out on the ATD heads. For each drop, the head was placed into a fine net and positioned to achieve the desired drop height and impact location. The head was then released to allow free fall without rotation onto a flat aluminum 34 -inch thick platen. The platen was attached to a three-axis piezoelectric load cell to measure the impact force. The peak resultant acceleration, head impact criterion (HIC) and impact stiffness were calculated using the force/time curve and drop mass. No statistical differences were found between the adult human heads and the adult Hybrid III head for 15cm and 30cm impacts (p>0.05). For the human heads, the mid-sagittal impact locations produced the highest HIC and peak acceleration values. The parietal impacts produced HICs and peak accelerations that were 26-48% lower than those from the mid-sagittal impacts. For the ATD heads, the acceleration and HIC values generally increased with represented age, except for the Q3, which produced HIC values up to higher than the other ATD heads. The impact responses of the adult Hybrid III onto different impact locations were found to adequately represent the impact stiffness of human adult head impacts from 30cm and below onto a rigid surface. The Q3 dummy consistently produced the highest HIC values of the ATD heads, and produced higher acceleration and HIC values than the adult human heads as well, which is contrary to neonatal data demonstrating that the head acceleration increases with age.

The mechanical and morphological properties of 6 year-old cranial bone.

Traumatic Brain Injury (TBI) is a leading cause of mortality and morbidity for children in the United States. The unavailability of pediatric cadavers makes it difficult to study and characterize the mechanical behavior of the pediatric skull. Computer based finite element modeling could provide valuable insights, but the utility of these models depends upon the accuracy of cranial material property inputs. In this study, 47 samples from one six year-old human cranium were tested to failure via four point bending to study the effects of strain rate and the structure of skull bone on modulus of elasticity and failure properties for both cranial bone and suture. The results show that strain rate does not have a statistically meaningful effect on the mechanical properties of the six year-old skull over the range of strain rates studied (average low rate of 0.045 s(-1), average medium rate of 0.44 s(-1), and an average high rate of 2.2 s(-1)), but that these properties do depend on the growth patterns and morphology of the skull. The thickness of the bone was found to vary with structure. The bending stiffness (per unit width) for tri-layer bone (12.32±5.18 Nm(2)/m) was significantly higher than that of cortical bone and sutures (5.58±1.46 Nm(2)/m and 3.70±1.88 Nm(2)/m respectively). The modulus of elasticity was 9.87±1.24 GPa for cranial cortical bone and 1.10±0.53 GPa for sutures. The effective elastic modulus of tri-layer bone was 3.69±0.92 GPa. Accurate models of the pediatric skull should account for the differences amongst these three distinct tissues in the six year-old skull.

A methodology for assessing blast protection in explosive ordnance disposal bomb suits.

To reduce human casualties associated with explosive ordnance disposal, a wide range of protective wear has been designed to shield against the blast effects of improvised explosive devices and munitions. In this study, 4 commercially available bomb suits, representing a range of materials and armor masses, were evaluated against 0.227 and 0.567 kg of spherical C-4 explosives to determine the level of protection offered to the head, neck, and thorax. A Hybrid III dummy, an instrumented human surrogate [1], was tested with and without protection from the 4 commercially available bomb suits. 20 tests with the dummy torso mounted to simulate a kneeling position were performed to confirm repeatability and robustness of the dummies, as well as to evaluate the 4 suits. Correlations between injury risk assessments based on past human or animal injury model data and various parameters such as bomb suit mass, projected area, and dummy coverage area were drawn.

Blast injury research: modeling injury effects of landmines, bullets, and bombs.

Terrorist blasts and landmine injuries have become more common in the past several decades generating thousands of casualties. Preventive and prognostic measures are limited by the lack of knowledge of these complex events. Previous blast research has focused on primary blast injuries that involve the lung, despite musculoskeletal injuries being the most common. Through the use of instrumented cadavers, Hybrid III test dummies, and other surrogates, unique models of these events have been created. The investigations studied the effectiveness of antimine footwear, forces and injury mechanisms in temporary shelters subjected to blast, modeling of blast-induced glass fragmentation, and helmet deformation and injury potential under ballistic load. Despite blasts being much higher rate events than those seen in automotive blunt trauma, we were able to measure forces and create injury models. We found that antimine footwear will require additional development to be effective. Guidelines for shelter placement have been altered, and tempered glass seems to offer no protection when compared with annealed glass. Although these models are in their nascent phase, the thorough understanding of the biomechanical nature of these blast injuries will assist in developing strategies to reduce injuries and in the creation of forecasting models.