Radiological Evaluation of the Recesses on the Posterior Wall of the Nasopharynx with Cone-beam Computed Tomography.

BACKGROUND: The posterior wall of the nasopharynx is composed of loose connective tissue that includes many important anatomical structures. Various structures, such as the opening of the Eustachian tube (ET), the Rosenmüller fossa (RF), and the pharyngeal bursa (PB) are found here. AIM: To evaluate the nasopharynx posterior wall anatomic structures, including the Eustachian tube, Rosenmüller fossa, and pharyngeal bursa with cone-beam computed tomography. MATERIALS AND METHODS: The depth, width, and length of the Eustachian tube, Rosenmüller fossa, and pharyngeal bursa were measured in 150 patients using axial-sagittal cone-beam computed tomography. The Eustachian tube and Rosenmüller fossa distance to the midsagittal plane, the coronal region passing through the posterior end of the nasal septum, the superior-inferior extremity of the recesses, and the nasal floor plane distance were measured. The relationship between Rosenmüller fossa types and other parameters were evaluated. RESULTS: The incidence of right Rosenmüller fossa types 1, 2, and 3 were 16%, 18%, and 66%, respectively, and that of the left Rosenmüller fossa types 1, 2, and 3 were 16%, 19.3%, and 64.7%, respectively. The mean pharyngeal bursa width, length, and depth were 10.8, 5.7, and 4.0 mm, respectively; those of the Eustachian tube were 5.6, 7.1, and 7.3 m, respectively; those of the right Rosenmüller fossa were 4.0, 12.4, and 10.5 mm, respectively; and those of the left Rosenmüller fossa were 3.8, 12.5, and 10.9 mm, respectively. CONCLUSIONS: The posterior wall of the nasopharynx contains several important anatomical structures. Evaluation of these using cone-beam computed tomography has many clinical and radiological advantages. To understand and interpret the coincidental findings in CBCT, dental radiologists should have access to more detailed information concerning the anatomy of the nasopharynx.

Evaluation of artificial intelligence for detecting periapical pathosis on cone-beam computed tomography scans.

AIM: To verify the diagnostic performance of an artificial intelligence system based on the deep convolutional neural network method to detect periapical pathosis on cone-beam computed tomography (CBCT) images. METHODOLOGY: images of 153 periapical lesions obtained from 109 patients were included. The specific area of the jaw and teeth associated with the periapical lesions were then determined by a human observer. Lesion volumes were calculated using the manual segmentation methods using Fujifilm-Synapse 3D software (Fujifilm Medical Systems, Tokyo, Japan). The neural network was then used to determine (i) whether the lesion could be detected; (ii) if the lesion was detected, where it was localized (maxilla, mandible or specific tooth); and (iii) lesion volume. Manual segmentation and artificial intelligence (AI) (Diagnocat Inc., San Francisco, CA, USA) methods were compared using Wilcoxon signed rank test and Bland-Altman analysis. RESULTS: The deep convolutional neural network system was successful in detecting teeth and numbering specific teeth. Only one tooth was incorrectly identified. The AI system was able to detect 142 of a total of 153 periapical lesions. The reliability of correctly detecting a periapical lesion was 92.8%. The deep convolutional neural network volumetric measurements of the lesions were similar to those with manual segmentation. There was no significant difference between the two measurement methods (P > 0.05). CONCLUSIONS: Volume measurements performed by humans and by AI systems were comparable to each other. AI systems based on deep learning methods can be useful for detecting periapical pathosis on CBCT images for clinical application.

The Intraoral Ultrasonography in Dentistry.

Ultrasonography (USG) is a diagnostic method that the ultrasonic image is created by ultrahigh-frequency sound waves, which have an acoustic frequency above the threshold of human hearing. Compared to other medical imaging methods, USG has several advantages of being real time, portable, inexpensive, radiation free, and noninvasive. In the medicine, most of the USG applications are transcutaneous. However, intraoral USG has been a relatively rare application, it has recently been drawing more interest. Intraoral USG is also used in dentistry for examining the salivary glands and ducts, as well as the mouth floor, the buccal, labial, and palatal mucosa, the tongue, periodontal tissues, and periapical lesions. The main purpose of this review is to provide detailed information about intraoral USG applications in dentistry.

Ponticulus posticus in a cohort of orthodontic children and adolescent patients with different sagittal skeletal anomalies: a comparative cone beam computed tomography investigation.

BACKGROUND: The objective of this study was to evaluate the prevalence and characteristics of ponticulus posticus (PP) in groups with sagittal skeletal anomalies in a Turkish population using cone beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 181 CBCT images were evaluated according to gender, side and characteristics of PP in the three different sagittal skeletal groups. RESULTS: The average age of the patients was 13.88 ± 2.99 years (ranging 8-18 years). The study population consisted of 104 (57.5%) females and 77 (42.5%) males. PP was detected in 66 (36.5%) patients. Unilateral and bilateral PP was identified in 29 (43.9%) and 37 (56.1%) patients, respectively. The prevalence of PP in the atlas vertebrae was found to be higher in males than in females and this was statistically significant (p ≤ 0.05). PP was most frequently detected in class III patients (25, 13.8%). Statistically significant differences between the different sagittal skeletal groups were observed (p ≤ 0.05). CONCLUSIONS: Ponticulus posticus is a common anomaly in Turkish populations and is associated with different sagittal skeletal patterns. The highest frequency of PP was found in angle class III patients. (Folia Morphol 2018; 77, 1: 65-71).

Cone beam computed tomography evaluation of ponticulus posticus in patients with cleft lip and palate: a retrospective radio-anatomic study.

BACKGROUND: Ponticulus posticus (PP) is an abnormal bony bridge on the atlas. It plays a significant role in patients undergoing C1 lateral mass screw procedure. Patients with cleft lip and palate (CLP) have higher risk than patients in general population for the appearance of cervical vertebral anomalies. The purpose of the this study was twofold: to determine the prevalence and characteristics of PP in patients with CLP, and to compare the findings with patients in general population using cone beam computed tomography. MATERIALS AND METHODS: Cone beam computed tomography images from 54 individuals who had undergone surgical repair of cleft lip and/or palate were analysed as the study group. For comparison purposes a control group was randomly selected from 108 patients and matched with the CLP subjects. RESULTS: Although 12 of the 54 (22.3%) patients with surgically repaired cleft lip and/or palate in the study group were identified to have PP, only 10 of the 108 (9.2%) patients in the control group had PP. The distribution of the presence of PP between the groups was statistically significant. CONCLUSIONS: Ponticulus posticus is an important anomaly and the presence of PP is important for patients. PP can have clinical significance in cervical spine surgery as this study has indicated that the likelihood of encountering PP is higher in patients with CLP. We suggest that PP should be taken into account prior to cervical vertebral surgery in patients with CLP. (Folia Morphol 2018; 77, 1: 72-78).

Ectopic Premolar Tooth in the Sigmoid Notch.

Impaction of a mandibular premolar is relatively uncommon. Ectopic placement is more unusual and there has been no discussion in the literature of an ectopic mandibular premolar in the coronoid process. In this case report, we present an impacted ectopic mandibular permanent premolar in the sigmoid notch (incisura mandibulae) region. Etiology of the tooth and treatment options are discussed and illustrated by Cone Beam Computed Tomography (CBCT) images.

Ultrasonography in the evaluation of the mid-palatal suture in rapid palatal expansion.

OBJECTIVES: Orthodontists usually evaluate the mid-palatal sutural opening with occlusal radiography. The purpose of this article is to evaluate the sutural opening with ultrasonography (USG) in a series of patients undergoing rapid palatal expansion (RPE). METHODS: The study included 87 USG images and 87 occlusal radiographs from 29 healthy patients (mean age, 13.9 years; range, 11-20 years; boys, 12; girls, 17) who required RPE treatment. The sutural opening was assessed with USG, and the amount of sutural expansion as mesiodistal length was measured immediately after appliance practice (T0), 10 turns (T1) and 20 turns (T2) during the expansion period. Sutural expansion evaluated by occlusal radiographs was scored at every stage. Measurements obtained by USG and scores observed in the occlusal radiographs were compared by non-parametric Kendall's tau test. RESULTS: Both USG and radiographic images revealed normal anatomical structure during pre-expansion (stage T0). On USG, sutural expansion was seen in 19 patients at stage T1. There was no expansion at this stage in ten patients. At stage T2, on USG and radiography, an increase in the amount of expansion was observed in 19 patients with sutural expansion at stage T1 and sutural expansion was observed in 5 patients without sutural expansion at stage T1. No expansion was observed at both stages T1 and T2 in five patients. USG measurements and occlusal scores in both T1 and T2 turns showed statistically significant correlation (p < 0.001). CONCLUSIONS: The results indicate that USG might be a useful method to assess mid-palatal sutural opening in patients undergoing RPE.