RESUMEN
Recent studies have demonstrated that the amount of specific airborne mold types and their concentrations increase during dust events. This study investigates the seasonal variation of airborne mold concentrations before, during, and after the dust transport in an eastern Mediterranean coastal area, Izmir city, Turkey. A total of 136 airborne mold samples were collected between September 2020 and May 2021. Two different culture media, namely Potato Dextrose Agar (PDA) and Malt-Extract Agar (MEA), were used for enumeration and genus-based identification of the airborne mold. In addition to culture media, the influences of air temperature, relative humidity, and particulate matter equal to or less than 10 µm (PM10) were also investigated seasonally. The HYSPLIT trajectory model and web-based simulation results were mainly used to determine dusty days. The mean total mold concentrations (TMC) on dusty days (543 Colony Forming Unit (CFU)/m3 on PDA and 668 CFU/m3 on MEA) were approximately 2-2.5 times higher than those on non-dusty days (288 CFU/m3 on PDA and 254 CFU/m3 on MEA) for both culture media. TMC levels showed seasonal variations (p < 0.001), indicating that meteorological parameters influenced mold concentrations and compositions. Some mold genera, including Cladosporium sp., Chrysosporium sp., Aspergillus sp., Bipolaris sp., Alternaria sp., and yeast, were found higher during dusty days than non-dusty days. Thus, dust event impacts levels and types of airborne molds and has implications for regions where long-range dust transport widely occurs.
RESUMEN
This study focuses on a heavily polluted effluent-dominated stream that passes through an industrialized region near Izmir, Turkey. The intermittent creek receives domestic and industrial discharges of Kemalpasa District Center and its neighborhoods and more than 180 factories of the organized industrial zone. A monitoring campaign was conducted on the creek and samples were taken in two different seasons with distinct hydrological characteristics from 20 stations along the creek to quantify the quality status of water and sediment columns. A number of physicochemical parameters, heavy metals, and trace elements were measured by field and laboratory techniques to assess the status of creek's water and sediment quality. The spatial and temporal variations were determined, and statistical tools were used to conduct an environmental forensic overview along the creek. A geo-accumulation index and a modified heavy metal pollution index were calculated to cumulatively assess the quality of sediment and water columns, respectively. The results revealed that the creek was under significant pollution load from the industrial zone where metal processing, food and beverage production, marble and natural stone manufacturing, and paper production are made. In particular, elements such as Co, Cu, Cd, Mn, Ni, Pb, Zn, and Zr were found to be above the surface water quality standard values. Similarly, B, Cr, Ni, Cu, Zn, and Sn were determined to be in extreme levels in the sediment column with values exceeding the probable effect concentrations.
Asunto(s)
Monitoreo del Ambiente , Ríos/química , Oligoelementos/análisis , Contaminantes Químicos del Agua/análisis , Sedimentos Geológicos/química , Metales Pesados/análisis , Estaciones del Año , Turquía , Contaminación Química del Agua/estadística & datos numéricos , Calidad del AguaRESUMEN
Concurrent coastal seawater (n = 22), sediment (n = 22), and atmospheric samples (n = 10) were collected in the Aliaga industrial region, Turkey, to explore the spatial variation, sources, and air-seawater exchange of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Seawater Σ16PAH concentrations (particle + dissolved) ranged between 5107 and 294,624 pg L-1, while Σ41PCB concentrations were in the range of 880-50,829 pg L-1. Levels in sediments were highly variable ranging between 35.5-49,682 and 2.7-2450 µg kg-1 in dry weight for Σ16PAHs and Σ41PCBs, respectively. Atmospheric concentrations varied between 1791-274,974 and 104-20,083 pg m-3 for Σ16PAHs and Σ41PCBs, respectively. Sediment organic matter (OM) content and levels of Σ16PAHs and Σ41PCBs correlated weakly (r 2 = 0.19-0.23, p < 0.05) suggesting that the spatial variations of PAHs and PCBs were mainly affected by local sources rather than their sorption to OM. The geographical distribution of PAH and PCB concentrations in air, seawater, and sediment and factor analysis on the sediment levels pointed out that the major sources in the region are steel plants, petroleum refinery, petrochemical complex, ship breaking, loading/unloading activities at the ports, vehicular emissions, and fossil fuel combustion emissions. The direction of the air-seawater exchange was also explored by estimating seawater fugacity fractions of PAHs and PCBs. For PAHs, the number of cases implying deposition (43.0%) and volatilization (39.5%) was similar, while for PCBs, the number of cases implying volatilization (60.4%) was much higher compared to deposition (21.6%). Fugacity fractions were generally <0.36 (deposition) at the sites close to industrial and ship breaking activities where the highest seawater and sediment levels were measured, implying that atmospheric deposition is an important mechanism affecting seawater and sediment PAH and PCB levels.
Asunto(s)
Bifenilos Policlorados , Hidrocarburos Policíclicos Aromáticos , Contaminantes Atmosféricos , Monitoreo del Ambiente , Sedimentos Geológicos/química , Agua de Mar/química , Turquía , Contaminantes Químicos del AguaRESUMEN
Polychlorinated naphthalene (PCN) emissions of scrap iron processing steel plants were explored by measuring concentrations in stack gases of five plants, in the atmosphere (n=11) at a site close to those plants, and in soil at several sites in the region (n=40) in Aliaga, Izmir, Turkey. Observed stack-gas Σ32PCN levels from the plants without scrap preheating (189±157ngNm-3, average±SD, n=4) showed that they are substantial PCN emitting sources. Stack-gas Σ32PCN level for the plant with scrap preheating was considerably higher (1262ngNm-3). Similarly, Σ32PCN emission factor for this plant was substantially higher (11.9mgton-1) compared to those without scrap preheating (1.30±0.98mgton-1). Results have also suggested that the investigated steel plants emit large quantities of fugitive particle-phase PCNs. Measured soil Σ32PCN concentrations that are considered to be representative of the atmospheric levels were greatly variable in the region, ranging between 0.003 and 10.02µgkg-1 (dry wt). Their spatial distribution showed that main PCN sources in the region were the iron-steel plants. Ambient air levels (1620±800pgm-3) were substantially higher than ones observed around the world and in the study area verifying that the steel plants with electric arc furnaces (EAFs) are important PCN sources. Investigation of possible mechanisms suggested that the combustion processes also contribute to emissions from EAFs in addition to evaporation of PCNs present in the scrap iron.
RESUMEN
Spatial distributions of persistent organic pollutants (POPs) were investigated in Iskenderun industrial region in Turkey. POP concentrations were measured in different tree components (i.e., pine needle, branch, bark, and stem) collected at several industrial and background sites (n = 27). Also, air, litter, and soil samples were analyzed to determine the relationship of atmospheric pollutants with tree components, litter, and soil. Spatial variation of measured concentrations and factor analysis showed that the iron-steel plants are the most important POP sources in Iskenderun area. Correlations of ambient air levels to those measured in soil, litter, and tree components were significant showing that POPs are exchanged between atmosphere and these compartments. Results have suggested that tree components, litter and soil could be used to determine the spatial distributions and sources of atmospheric POPs in a region. POP quantities (mg/ha) accumulated in different tree components, litter, and soil were also predicted. Generally, the highest quantities were accumulated by stem and needles. In terms of overall inventory, including trees, litter and soil, the highest accumulated quantities were found in soil followed by trees and litter, indicating that in addition to soil, vegetation is a notable reservoir accumulating POPs. Ambient air POP concentrations were also estimated using a bark/air partitioning model. The estimated/measured ratios were close to 1.0 for several compounds and the results showed that the atmospheric POP concentrations could be estimated from the bark measurements within factors of 0.23-3.07, 1.02-6.67, 0.63-7.44, 1.07-3.37 for polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polychlorinated naphthalenes, and polybrominated diphenyl ethers, respectively.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Éteres Difenilos Halogenados/análisis , Bifenilos Policlorados/análisis , Contaminantes del Suelo/análisis , Atmósfera/análisis , Contaminación Ambiental/análisis , Geografía , Residuos Industriales , Industrias , Pinus , Hidrocarburos Policíclicos Aromáticos/análisis , Análisis de Componente Principal , Suelo/química , Acero/análisis , Árboles , TurquíaRESUMEN
Several trace and macro elements (n=48) were measured in pine needle, branch, bark, tree ring, litter, and soil samples collected at 27 sites (21 industrial, 6 background) to investigate their spatial and historical variation in Aliaga industrial region in Turkey. Concentrations generally decreased with distance from the sources and the lowest ones were measured at background sites far from major sources. Spatial distribution of anthropogenic trace elements indicated that their major sources in the region are the iron-steel plants, ship-breaking activities and the petroleum refinery. Patterns of 40 elements that were detected in most of the samples were also evaluated to assess their suitability for investigation of historical variations. Observed increasing trends of several trace and macro elements (As, Cr, Fe, Mo, Ni, V, Cu, Pb, Sb, Sn, and Hg) in the tree-ring samples were representative for the variations in anthropogenic emissions and resulting atmospheric concentrations in Aliaga region. It was shown that lanthanides (La, Ce, Pr, Nd, Sm, Gd, Dy, Er, Yb) could also be used for the investigation of historical variations due to specific industrial emissions (i.e., petroleum refining). Results of the present study showed that tree components, litter, and soil could be used to determine the spatial variations of atmospheric pollution in a region while tree rings could be used to assess the historical variations.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente , Pinus/química , Contaminantes del Suelo/análisis , Oligoelementos/análisis , Contaminación del Aire/estadística & datos numéricos , Industrias , TurquíaRESUMEN
Concentrations of several polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and polybrominated diphenyl ethers (PBDEs) were measured in precipitation (n = 33) at a suburban site in Izmir, Turkey. Total (dissolved + particle) volume weighted mean (VWM) concentrations for Σ16PAHs, Σ18PCBs, Σ17OCPs, and Σ7PBDEs were 785, 19.2, 50.5, and 29.6 ng l(-1), respectively. Low molecular weight (LMW) compounds (acenaphthylene, fluorene, phenanthrene) and congeners (PCB-18, 28, and 31) dominated the PAH and PCB concentrations, respectively. For PBDEs, BDE-209, and for OCPs, chlorpyrifos, a currently used pesticide, were the predominant compounds. Annual Σ7PBDEs flux was 18.74 µg m(-2) year(-1). PBDE fluxes were mainly in dissolved phase for all congeners except BDE-209 which had comparable proportions in both phases. Annual flux for Σ16PAHs was 497.4 µg m(-2) year(-1); higher molecular weight (MW) PAH fluxes had comparable amounts in both phases while lower MW ones were mostly in dissolved phase. Wet deposition fluxes for Σ18PCBs and Σ17OCPs were 9.40 and 31.94 µg m(-2) year(-1), respectively, and they were predominantly in dissolved phase. Wet deposition fluxes were compared to previously measured annual dry deposition fluxes at the study site to determine their relative contributions to annual total (dry particle + wet) deposition. Dry deposition was the major removal mechanism for most of the PAHs and PCBs contributing >80 % to total (wet + dry) deposition. However, both processes were comparable for PBDEs. Wet deposition was the predominant process for some OCPs such as α-chlordane, γ-chlordane, and trans-nonachlor while both processes were comparable for chlorpyrifos and heptachlor epoxide.
Asunto(s)
Monitoreo del Ambiente , Lluvia , Contaminantes del Suelo/análisis , Clordano/análisis , Éteres Difenilos Halogenados/análisis , Hidrocarburos Clorados/análisis , Plaguicidas/análisis , Bifenilos Policlorados/análisis , Hidrocarburos Policíclicos Aromáticos/análisis , TurquíaRESUMEN
We measured SO2, NO2 and O3 concentrations during the summer and winter in Kocaeli, Turkey. The sampling was carried out indoors and outdoors at homes, schools and offices. Personal samplers were also used to determine personal exposures to these pollutants. High NO2 and SO2 concentrations were observed in outdoor samples collected close to locations characterized by heavy urban traffic. Concentrations of O3, on the other hand, were higher in rural areas around the city due to ozone distillation. For both sampling periods, the concentrations of outdoor SO2 and O3 were higher than for indoor and personal samples; however, the NO2 concentrations were higher in indoor and personal samples, indicating that outdoor sources significantly contribute to indoor SO2 and O3 levels and that indoor NO2 concentrations are primarily modulated by sources within buildings. Seasonal variations in pollutant concentrations showed statistically significant differences. Indoor and outdoor concentrations of NO2 and SO2 measured in the winter were higher than the levels measured in the summer; O3 concentrations, on the other hand, exhibited the opposite trend. Active-to-passive concentration ratios for NO2, SO2 and O3 were 0.99, 1.08 and 1.16, respectively; the corresponding outdoor ratios were 0.95, 0.99 and 1.00.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Ciudades , Exposición a Riesgos Ambientales/análisis , Monitoreo del Ambiente/estadística & datos numéricos , Monitoreo del Ambiente/métodos , Humanos , Monitoreo Ambulatorio/estadística & datos numéricos , Dióxido de Nitrógeno/análisis , Ozono/análisis , Estaciones del Año , Dióxido de Azufre/análisis , TurquíaRESUMEN
Several persistent organic pollutants (POPs) like polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and polybrominated diphenyl ethers (PBDEs) were measured in needle, branch, bark, and tree ring samples in pine samples collected at 27 sites (21 industrial, 6 background) in Aliaga industrial region in Turkey. Soil, litter, and air samples were also collected to investigate the relationships between the air and soil, litter, and tree components. Concentrations decreased with distance from the sources and the lowest ones were measured at background sites. The spatial distribution of POPs indicated that the major sources in the region are the iron-steel, ship-breaking, petrochemical plants and the petroleum refinery. Significant correlations between the air concentrations and, soil, litter, and tree components indicated the interaction of these compartments with air. Observed increasing trends of POPs in the tree-ring samples were representative for the variations in anthropogenic emissions and resulting atmospheric concentrations in Aliaga region. These results indicated that tree components, litter and soil could be used to determine the spatial variations while tree rings could be used to investigate the historical trends of atmospheric POPs in a region. POP amounts (mg/ha) stored in different tree components, litter, and soil were also inventoried. Among the tree components, generally, the highest amounts were stored in the stem followed by needles. For the overall inventory, the highest amounts were stored in soil for PCNs, PBDEs, and PCBs while highest PAH amounts were stored in trees, indicating that in addition to soil, vegetation is also an important reservoir for POPs.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Industrias , Compuestos Orgánicos/análisis , Pinus/química , Contaminantes del Suelo/análisis , Éteres Difenilos Halogenados/análisis , Hidrocarburos Bromados/análisis , Hidrocarburos Clorados/análisis , Componentes Aéreos de las Plantas/química , Hidrocarburos Policíclicos Aromáticos/análisis , TurquíaRESUMEN
Topsoil samples (n = 40) were collected from a heavily industrialized region in Turkey. The region includes several scrap processing iron-steel plants with electric arc furnaces (EAFs), a petroleum refinery, a petrochemical complex, steel rolling mills, a natural gas-fired power plant, ship-breaking yards and very dense transportation activities. The region has undergone a rapid transition from an agricultural region to a heavily industrialized region in the last three decades. Collected soil samples were analyzed for 48 trace elements using inductively coupled plasma-mass spectrometry (ICP-MS). The elemental distribution pattern in the region indicated that Nemrut area with dense iron-steel production activities was a hotspot for elemental pollution. In addition to crustal elements, concentrations of anthropogenic trace elements (i.e., Fe, Zn, Pb, Mn, Cu, Cd, Cr and Mo) were very high in the area influencing many parts of the region. Elemental compositions of fugitive sources polluting the soil (i.e., paved and unpaved roads, slag piles, EAFs filter dust piles and coal piles) were also determined. The methods (enrichment factors [EFs] and the index of geoaccumulation [Igeo]) used for determination of pollution status of soil showed that Cr, Ag, Zn, As and Pb were the strongly contaminating elements for the region. Principal component analysis (PCA) clearly indicated that anthropogenic sources (steel production, refinery and petrochemical processes and traffic) were important sources in this region.
Asunto(s)
Monitoreo del Ambiente , Contaminantes del Suelo/análisis , Suelo/química , Oligoelementos/análisis , Carbón Mineral/análisis , Contaminación Ambiental/análisis , Contaminación Ambiental/estadística & datos numéricos , Industrias/estadística & datos numéricos , Centrales Eléctricas/estadística & datos numéricos , Análisis de Componente Principal , TurquíaRESUMEN
Normalized biogenic volatile organic compound (BVOC) emission rates for thirty one tree species that cover the 98% of national forested areas in Turkey were determined. Field samplings were performed at fourteen different forested areas in Turkey using a specific dynamic enclosure system. The selected branches of tree species were enclosed in a chamber consisted of a transparent Nalofan bag. The air-flows were sampled from both inlet and outlet of the chamber by Tenax-filled sorbent tubes during photosynthesis of trees under the presence of sunlight. Several environmental parameters (temperature, humidity, photosynthetically active radiation-PAR, and CO2) were continuously monitored inside and outside the enclosure chamber during the samplings. Collected samples were analyzed using a gas chromatography mass spectrometry (GC/MS) system equipped with a thermal desorber (TD). Sixty five BVOCs classified in five major groups (isoprene, monoterpenes, sesquiterpenes, oxygenated sesquiterpenes, and other oxygenated compounds) were analyzed. Emission rates were determined by normalization to standard conditions (1000 µmol/m(2)s PAR and 30 °C temperature for isoprene and 30 °C temperature for the remaining compounds). In agreement with the literature, isoprene was mostly emitted by broad-leaved trees while coniferous species mainly emitted monoterpenes. Several tree species such as Sweet Chestnut, Silver Lime, and European Alder had higher monoterpene emissions although they are broad-leaved species. High isoprene emissions were also observed for a few coniferous species such as Nordmann Fir and Oriental Spruce. The highest normalized total BVOC emission rate of 27.1 µg/gh was observed for Oriental Plane while South European Flowering Ash was the weakest BVOC emitter with a total normalized emission rate of 0.031 µg/gh. Monoterpene emissions of broad-leaved species mainly consisted of sabinene, limonene and trans-beta-ocimene, while alpha-pinene, beta-pinene and beta-myrcene were generally emitted by coniferous species. Oxygenated compounds were the third most prominent BVOC group and sesquiterpenes had slightly lower contributions.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente , Árboles/fisiología , Compuestos Orgánicos Volátiles/análisis , Monoterpenos Acíclicos , Contaminantes Atmosféricos/metabolismo , Alquenos/análisis , Alquenos/metabolismo , Monoterpenos Bicíclicos , Compuestos Bicíclicos con Puentes/análisis , Compuestos Bicíclicos con Puentes/metabolismo , Butadienos/análisis , Butadienos/metabolismo , Ciclohexenos/análisis , Ciclohexenos/metabolismo , Hemiterpenos/análisis , Hemiterpenos/metabolismo , Limoneno , Monoterpenos/análisis , Monoterpenos/metabolismo , Pentanos/análisis , Pentanos/metabolismo , Sesquiterpenos/análisis , Sesquiterpenos/metabolismo , Terpenos/análisis , Terpenos/metabolismo , Turquía , Compuestos Orgánicos Volátiles/metabolismoRESUMEN
Air pollution in cities is a major environmental problem principally in the developing countries. The quantification of emissions is a basic requirement to assess the human influence to the atmosphere. The air quality generally shows decreases with the major contribution residential emissions and meteorology in the winter season in the big cities. Poor meteorological conditions especially inversion events for the efficient mixing of air pollutants occurred during the winter months in Izmir. With this work we quantify the amount of domestic heating emissions for particulate matter (PM10), sulfur dioxides (SO2), nitrogen dioxides (NO2), volatile organic compounds (VOC) and carbon monoxide (CO) together with greenhouse gases which are carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4) in Izmir for 2008-2009 winter season. The results showed that the most affected residential areas were central districts in the city center from domestic heating emissions due to meteorological condition and demographic reasons. Air quality modeling is a great tool for assisting policy makers how to decrease emissions and improve air quality. At the second part of the study, calculated emissions were modeled by using CALMET/CALPUFF dispersion modeling system and plotted in the form of air pollution maps by using geographical information system to determine the locations and estimate the effects of the new residential areas that will be established in the future in Izmir.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente , Contaminación del Aire/estadística & datos numéricos , Monóxido de Carbono/análisis , Calefacción , Humanos , Dióxido de Nitrógeno/análisis , Óxido Nitroso/análisis , Material Particulado/análisis , Dióxido de Azufre/análisis , Turquía , Compuestos Orgánicos Volátiles/análisisRESUMEN
Total suspended particles mass concentrations (TSP) and bulk depositions of particulate matter (PM depositions) were measured around a cement plant located in the multi-impacted area to assess the affect of the plant on the ambient air in the vicinity in Izmir, Turkey. TSP samples were collected five times a month whereas PM depositions were sampled monthly at four sites between August 2003 and January 2004. The concentrations of Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, and Zn in TSP and PM depositions (except Cu) were reported. Chemical mass balance (CMB) receptor model with local source profiles was run in order to calculate the source contributions of the PM sources to the concentrations of TSP, PM depositions, and trace elements. Traffic was found to be the major contributor to TSP whereas PM depositions dominantly result from area sources including several stone quarries, concrete plants, lime kilns, and asphalt plants in the region. CMB model results indicate that the cement plant is a significant contributor to TSP, PM depositions, and trace elements, particularly Cd.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Residuos Industriales/análisis , Material Particulado/análisis , Oligoelementos/análisis , Cadmio/análisis , Transportes , TurquíaRESUMEN
Persistent organic pollutant (POP) concentrations were measured in stack-gases of ferrous scrap processing steel plants with electric arc furnaces (EAFs) (n = 5) in Aliaga, Izmir, Turkey and in air (n = 11) at a site near those plants. Measured stack-gas concentrations for the four plants without scrap preheating (611 +/- 311, 165,000 +/- 285,000, and 33 +/- 3 ng m(-3), average +/- SD for sigma41PCBs, sigma16PAHs, and sigma7PBDEs, respectively) indicated that they are significant sources for polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs). POP emissions from the plant with scrap preheating were significantly higher (13 500, 445 000, and 91 ng m(-3) for sigma41PCBs, sigma16PAHs, and sigma7PBDEs, respectively). It was also shown that the steel plants emit considerable amounts of fugitive POPs in particle-phase. Estimated emissions using the emission factors generated in this study and the production amounts suggested that the steel plants with EAFs may significantly contribute to local and global PAH, PCB, and PBDE emissions. Several other compounds (aromatic and aliphatic hydrocarbons, oxygen, sulfur, nitrogen, and chlorine-containing organic compounds, n = 49) were identified and determined semiquantitatively in the stack-gas and ambient air samples. Ambient air concentrations (62 +/- 35, 320 +/- 134 ng m(-3), 1451 +/- 954 pg m(-3), for sigma41PCBs, sigma16PAHs, and sigma7PBDEs, respectively) were significantly higher than those measured previously around the world and in the region, further confirming that the steel plants with EAFs are "hot spots" for POPs.
Asunto(s)
Contaminantes Atmosféricos/análisis , Residuos Industriales/análisis , Metalurgia , Compuestos Orgánicos/análisis , Acero/química , Monitoreo del Ambiente/métodos , Incendios , Metalurgia/instrumentación , Metalurgia/métodos , Compuestos Orgánicos/toxicidad , Turquía , Volatilización , VientoRESUMEN
Atmospheric particulate matter (PM) fractions (PM(10) and PM(2.5)) were sampled concurrently between June 2004 and May 2005 at two sites (urban and suburban) in Izmir, Turkey. The elemental composition of PM (Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr, V, and Zn) was determined using inductively coupled plasma-optical emission spectrometer. Elemental compositions of several PM sources were also characterized. Positive matrix factorization (PMF) and chemical mass balance modeling (CMB) were applied to determine the PM sources and their contributions to air concentrations. The major contributors to PM were fossil fuel burning, traffic emissions, mineral industries and marine salt according to the PMF results. However, undetermined parts were more than 40%. On the other hand, the contributions to PM could be determined completely by CMB, and the dominant contributor was traffic with >70% at the two sites. Fossil fuel burning, mineral industries, marine salt and natural gas-fired power plant were the minor contributors.
Asunto(s)
Contaminantes Atmosféricos/análisis , Metales/análisis , Material Particulado/análisis , Carbón Mineral , Monitoreo del Ambiente/estadística & datos numéricos , Metalurgia , Tamaño de la Partícula , Petróleo , Centrales Eléctricas , Turquía , Emisiones de VehículosRESUMEN
Samples of PM10 and PM2.5 were collected from several natural and anthropogenic sources using in-stack cyclone, grab sampling/resuspension chamber and ambient air samplers. The chemical characterization of the samples was achieved containing Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr, V and Zn using an inductively coupled plasma-optical emission spectrometer (ICP-OES). The elemental fractions (weight percent by mass), standard deviations and uncertainties were reported. The elemental compositions of PM emitted from mineral industries and cement kiln were dominated by terrestrial elements, particularly Ca, whereas the profile of top-soil mainly contained Al and Ca. The profiles of industrial sources were generally typical for related ones; however, significant differences were obtained for some of them. Similarly, the profiles of fuel burning emissions have significant differences compared to profiles obtained all around the world.
Asunto(s)
Actividades Humanas , Material Particulado/análisis , Material Particulado/química , Cerámica/química , Industria Química , Carbón Mineral , Minas de Carbón , Aceites Combustibles , Humanos , Plomo/química , Océanos y Mares , Aceite de Oliva , Aceites de Plantas/química , Centrales Eléctricas , Sales (Química)/química , Suelo , Turquía , Madera/químicaRESUMEN
Atmospheric concentrations of polychlorinated biphenyls (PCBs) and trace elements were measured at two sites (Industrial and Urban) located around the Aliaga industrial region, Izmir, Turkey. Average sigma 36PCB concentrations were 3136+/-824 and 1371+/-642 pg m(-3) for summer and winter periods, respectively in the Industrial site and they were 314+/-129 and 847+/-610 pg m(-3) in the Urban site. The elemental content showed that the PM(10) measured at the Industrial site was dominated by terrestrial elements and trace elements emitted by the iron-steel plants (Fe, Zn and Pb). The elemental profile at the Urban site was typical for Aegean Region that was dominated by terrestrial elements (Ca, Al, Mg) and sea salt (Na). Sources of particle-phase PCBs and trace elements were identified using factor analysis (FA) and were apportioned by chemical mass balance (CMB) model. FA suggested that the steel industry, fuel oil combustion, or the nearby vinyl chloride process in the petrochemical plant, and soil were significant PCB sources. CMB results showed that at the Industrial site, the contribution of steel industry and soil to particle-phase PCBs were 71% and 22%, respectively, while at the Urban site, the contributions were 33% and 49%, respectively. Steel industry was also the dominant contributor for trace elements around the site. Fugacity calculations in air and soil showed that the soil acts as a secondary source to the atmosphere for low molecular weight PCBs especially in summer and as a sink for the higher molecular weight ones.
Asunto(s)
Contaminantes Atmosféricos/análisis , Material Particulado/análisis , Bifenilos Policlorados/análisis , Oligoelementos/análisis , Contaminantes Atmosféricos/química , Monitoreo del Ambiente , Residuos Industriales , Modelos Lineales , Modelos Químicos , Tamaño de la Partícula , Material Particulado/química , Bifenilos Policlorados/química , Estaciones del Año , Oligoelementos/química , TurquíaRESUMEN
Air samples were collected in Izmir, Turkey at two (suburban and urban) sites during three sampling programs in 2002 and 2004 to determine the ambient concentrations of several monoaromatic, chlorinated and oxygenated volatile organic compounds (VOCs). Samples were analyzed for 60 VOCs using gas chromatography/mass spectrometry and 28 compounds were detected in most samples. On the average, urban air VOC concentrations were about four times higher than those measured at the suburban site. Toluene (40.6%) was the most abundant compound in suburban site and was followed by benzene (7.4%), o,m-xylene (6.5%), and 1,2-dichloroethane (5.1%). In urban site, toluene (30.5%), p-xylene (14.9%), o,m-xylene (11.4%), and ethyl benzene (7.2%) were the dominating compounds in summer. In winter, toluene (31.1%), benzene (23.9%), 1,2-dichloroethane (9.5%), and o,m-xylene (8.2%) were the most abundant compounds. Receptor modeling (positive matrix factorization) has been performed to estimate the contribution of specific source types to ambient concentrations. Six source factors (gasoline vehicle exhaust, diesel vehicle exhaust+residential heating, paint production/application, degreasing, dry cleaning, and an undefined source) were extracted from the samples collected in the urban site. Three source factors (gasoline vehicle exhaust, diesel vehicle exhaust, and paint production/application) were identified for the suburban site.