Chirality in luminescent Cs3Cu2Br5 microcrystals produced via ligand-assisted reprecipitation.

Herein we report new chiral luminescent Cs3Cu2Br5 needle-like microcrystals and the analysis of their optical properties and the effect of the ligand structure on the transfer of chirality.

Chiral non-stoichiometric ternary silver indium sulfide quantum dots: investigation on the chirality transfer by cysteine.

Chiral semiconductor quantum dots have recently received broad attention due to their promising application in several fields such as sensing and photonics. The extensive work in the last few years was focused on the observation of the chiroptical properties in binary Cd based systems. Herein, we report on the first evidence of ligand-induced chirality in silver indium sulfide semiconductor quantum dots. Ternary disulfide quantum dots are of great interest due to their remarkable optical properties and low toxicity. Non-stoichiometric silver indium sulfide quantum dots were produced via a room temperature coprecipitation in water, in the presence of cysteine as a capping agent. The obtained nanocrystals show a notable photoluminescence quantum yield of 0.24 in water dispersions. Several critical aspects of the nanocrystal growth and chemico-physical characterization, and the optimisation of the surface passivation by the chiral ligand in order to optimize the nanoparticle chirality are thoroughly investigated. Optical spectroscopy methods such as circular dichroism and luminescence as well as nuclear magnetic resonance techniques are exploited to analyze the coordination processes leading to the formation of the ligand-nanocrystal chiral interface. This study highlights the dynamic nature of the interaction between the nanocrystal surface and the chiral ligand and clarifies some fundamental aspects for the transfer and optimization of the chiroptical properties.

Fast and non-destructive neutron activation analysis for simultaneous determination of TiO2 and SiO2 in sunscreens with attention to regulatory and research issues.

A new instrumental neutron activation analysis (INAA) for the simultaneous determination of titanium (TiO2) and silica (SiO2) dioxide as UV-filters in sunscreens is described. Samples are encapsulated, neutron irradiated (30 s) and after a suitable decay (3 min), the induced 51Ti (T1/2 = 5.76 min) and 29Al (T1/2 = 6.56 min) radionuclides are measured for the emitted γ-ray fingerprint. Three applications were carried out: (i) screening study (analysis of commercial sunscreens in combination with single particle inductively coupled plasma mass spectrometry (sp-ICP-MS); (ii) research study (development of innovative UV-filters such as titanium dioxide or bismuth titanate loaded inorganic mesoporous silica nanoparticles, MSN); (iii) validation study (intercalibration of a spectrochemical method - inductively coupled plasma optical emission spectrometry, ICP-OES). Collectively, the nuclear method appears a powerful tool adequate for quantifying TiO2 and SiO2 in the above studies. The limited accessibility at the nuclear reactor for neutron activation is probably one of the reasons why the excellent characteristics of the nuclear technique are not always fully known and exploited in the industrial and research chemical world.

Facile Cellulase Immobilisation on Bioinspired Silica.

Cellulases are enzymes with great potential for converting biomass to biofuels for sustainable energy. However, their commercial use is limited by their costs and low reusability. Therefore, the scientific and industrial sectors are focusing on finding better strategies to reuse enzymes and improve their performance. In this work, cellulase from Aspergillus niger was immobilised through in situ entrapment and adsorption on bio-inspired silica (BIS) supports. To the best of our knowledge, this green effect strategy has never been applied for cellulase into BIS. In situ entrapment was performed during support synthesis, applying a one-pot approach at mild conditions (room temperature, pH 7, and water solvent), while adsorption was performed after support formation. The loading efficiency was investigated on different immobilisation systems by Bradford assay and FTIR. Bovine serum albumin (BSA) was chosen as a control to optimize cellulase loading. The residual activity of cellulase was analysed by the dinitro salicylic acid (DNS) method. Activity of 90% was observed for the entrapped enzyme, while activity of ~55% was observed for the adsorbed enzyme. Moreover, the supported enzyme systems were recycled five times to evaluate their reuse potential. The thermal and pH stability tests suggested that both entrapment and adsorption strategies can increase enzyme activity. The results highlight that the entrapment in BIS is a potentially useful strategy to easily immobilise enzymes, while preserving their stability and recycle potential.

Modification of Amorphous Mesoporous Zirconia Nanoparticles with Bisphosphonic Acids: A Straightforward Approach for Tailoring the Surface Properties of the Nanoparticles.

The use of readily prepared bisphosphonic acids obtained in few steps through a thio-Michael addition of commercially available thiols on tetraethyl vinylidenebisphosphonate enables the straightforward surface modification of amorphous mesoporous zirconia nanoparticles. Simple stirring of the zirconia nanoparticles in a buffered aqueous solution of the proper bisphosphonic acid leads to the surface functionalization of the nanoparticles with different kinds of functional groups, charge and hydrophobic properties. Formation of both chemisorbed and physisorbed layers of the bisphosphonic acid take place, observing after extensive washing a grafting density of 1.1 molecules/nm2 with negligible release in neutral or acidic pH conditions, demonstrating stronger loading compared to monophosphonate derivatives. The modified nanoparticles were characterized by IR, XPS, ζ-potential analysis to investigate the loading of the bisphosphonic acid, FE-SEM to investigate the size and morphologies of the nanoparticles and 31 P and 1 H MAS NMR to investigate the coordination motif of the phosphonate units on the surface. All these analytical techniques demonstrated the strong affinity of the bisphosphonic moiety for the Zr(IV) metal centers. The functionalization with bisphosphonic acids represents a straightforward covalent approach for tailoring the superficial properties of zirconia nanoparticles, much straightforward compared the classic use of trisalkoxysilane or trichlorosilane reagents typically employed for the functionalization of silica and metal oxide nanoparticles. Extension of the use of bisphosphonates to other metal oxide nanoparticles is advisable.

The formation mechanism and chirality evolution of chiral carbon dots prepared via radical assisted synthesis at room temperature.

We report on a Cu(ii) catalyzed process for the production of cysteine based chiral carbon dots; the process does not require any thermal treatment and the carbon dot formation is driven by the production of reactive radical species that are generated in the reaction media by the catalytic role played by the multivalent transition metal. The nanomaterial presents a well-defined chirality and the enantioselectivity of the synthesis is proved by the isolation of both the carbon dot enantiomers. We focused our attention on the processes that take place during the carbon dot formation and the relationship with the structure of the organic starting material. Thanks to the comparison of reactions conducted with different organic substrates whose thiyl radical chemistry is known, we recognized a non-trivial role of the radical hydrogen abstraction reactions in the carbon dot formation process. The reported process allows access to a large variety of analyses to monitor the reaction mixtures during the reaction course. Finally, we report a detailed analysis on the evolution of optical chirality during the synthesis and related this feature with the formation mechanism of the nanomaterial revealing significant evidence on the chirality origin and structure of chiral carbon dots.

Genotoxicity and Immunotoxicity of Titanium Dioxide-Embedded Mesoporous Silica Nanoparticles (TiO2@MSN) in Primary Peripheral Human Blood Mononuclear Cells (PBMC).

Background: TiO2 nanoparticles (TiO2 NPs) are the nanomaterial most produced as an ultraviolet (UV) filter. However, TiO2 is a semiconductor and, in nanoparticle size, is a strong photocatalyst, raising concerns about photomutagenesis. Mesoporous silica nanoparticles (MSN) were synthetized incorporating TiO2 NPs (TiO2@MSN) to develop a cosmetic UV filter. The aim of this study was to assess the toxicity of TiO2@MSN, compared with bare MSN and commercial TiO2 NPs, based on several biomarkers. Materials and Methods: Human peripheral blood mononuclear cells (PBMC) were exposed to TiO2@MSN, bare MSN (network) or commercial TiO2 NPs for comparison. Exposed PBMC were characterized for cell viability/apoptosis, reactive oxygen species (ROS), nuclear morphology, and cytokines secretion. Results: All the nanoparticles induced apoptosis, but only TiO2 NPs (alone or assembled into MSN) led to ROS and micronuclei. However, TiO2@MSN showed lower ROS and cytotoxicity with respect to the P25. Exposure to TiO2@MSN induced Th2-skewed and pro-fibrotic responses. Conclusions: Geno-cytotoxicity data indicate that TiO2@MSN are safer than P25 and MSN. Cytokine responses induced by TiO2@MSN are imputable to both the TiO2 NPs and MSN, and, therefore, considered of low immunotoxicological relevance. This analytical assessment might provide hints for NPs modification and deep purification to reduce the risk of health effects in the settings of their large-scale manufacturing and everyday usage by consumers.

Confined-Melting-Assisted Synthesis of Bismuth Silicate Glass-Ceramic Nanoparticles: Formation and Optical Thermometry Investigation.

Bismuth-based (nano)materials have been attracting increasing interest due to appealing properties such as high refractive indexes, intrinsic opacity, and structural distortions due to the stereochemistry of 6s2 lone pair electrons of Bi3+. However, the control over specific phases and strategies able to stabilize uniform bismuth-based (nano)materials is still a challenge. In this study, we employed the ability of bismuth to lower the melting point of silica to introduce a new synthetic approach able to confine the growth of bismuth-oxide-based materials into nanostructures. Combining in situ temperature-dependent synchrotron radiation X-ray powder diffraction (XRPD) with high-resolution transmission electron microscopy (HR-TEM) analyses, we demonstrate the evolution of a confined Bi2O3-SiO2 nanosystem from Bi2SiO5 to Bi4Si3O12 through a melting process. The silica shell acts as both a nanoreactor and a silicon source for the stabilization of bismuth silicate glass-ceramic nanocrystals keeping the original spherical shape. The exciton peak of Bi2SiO5 is measured for the first time allowing the estimation of its real energy gap. Moreover, based on a detailed spectroscopic investigation, we discuss the potential and the limitations of Nd3+-activated bismuth silicate systems as ratiometric thermometers. The synthetic strategy introduced here could be further explored to stabilize other bismuth-oxide-based materials, opening the way toward the growth of well-defined glass-ceramic nanoparticles.

Sodium niobate based hierarchical 3D perovskite nanoparticle clusters.

We report a microwave assisted synthesis of NaNbO3 perovskite mesocrystals with a hierarchical morphology formed by the self-assembly of nanoparticles in particle clusters. The synthesis method combines non-aqueous sol-gel synthesis and microwave heating in a single step process that allows us to isolate crystalline single phase NaNbO3 in few minutes. A detailed investigation of the effect of the reaction temperature on the crystallinity and morphology of the product was conducted. The synthesis stabilizes the unusual orthorhombic phase Pmma, a property that can be ascribed to the crystal size (24 nm). TEM and SAED analyses show that the hierarchical polycrystalline particles behave as single crystals, a feature related to a non-classical crystallization mechanism. Moreover, the optical bandgap of this NaNbO3 phase was estimated for the first time. The results suggest the potential of this synthetic procedure for the fast production of high quality tertiary oxide nanocrystals.

Bismuth titanate-based UV filters embedded mesoporous silica nanoparticles: Role of bismuth concentration in the self-sealing process.

The development of new safe inorganic UV filters to effectively protect the skin from ultraviolet (UV) radiation effects is an emerging issue. Bismuth titanate-based UV filters embedded into mesoporous silica nanoparticles (MSN) represent a new class of inorganic sunscreens, with excellent UVA and UVB shielding properties. In addition, the presence of bismuth ions promotes a self-sealing process, allowing (i) the entrapment of the active phases in the deepest core of the system and (ii) the formation of an external glassy silica layer with a consequent suppression of the photocatalytic activity. In this work, aimed at studying in detail the self-sealing mechanism and accessing the role of bismuth ions in the formation of the system, a series of samples impregnated with a different amount of bismuth were investigated. The self-sealing process already occurs at the lowest content of bismuth and the mechanism is demonstrated to be triggered by the ability of Bi to work as a low-melting point agent for silica. Finally, a sunscreen formulation containing the new UV filter was prepared and the Sun Protection Factor (SPF), the pH and the viscosity were measured, demonstrating the potential of the proposed material for large-scale applications.

Bi2SiO5@g-SiO2 upconverting nanoparticles: a bismuth-driven core-shell self-assembly mechanism.

Core-shell systems have attracted increasing interest among the research community in recent years due to their unique properties and structural features, and the development of new synthetic strategies is still a challenge. In this work, we have investigated lanthanide-doped Bi2SiO5 nanocrystal formation inside mesoporous silica nanoparticles (MSNs). The role of both synthesis temperature and concentration of the bismuth precursor impregnated into the MSNs is discussed, showing an unprecedented strategy for the simultaneous stabilization of a crystalline core and a glassy shell. Temperature dependent synchrotron radiation X-ray powder diffraction (SR-XRPD) and high resolution transmission electron microscopy (HR-TEM) analyses allow one to follow the crystalline core growth. A mechanism for the formation of a Bi2SiO5@g-SiO2 core-shell nanosystem is proposed. In addition, the easy tunability of the color output of the upconverting system is demonstrated by means of suitable doping lanthanide ions with potential applications in several fields.

Precursor-Dependent Photocatalytic Activity of Carbon Dots.

This work systematically compares both structural features and photocatalytic performance of a series of graphitic and amorphous carbon dots (CDs) prepared in a bottom-up manner from fructose, glucose, and citric acid. We demonstrate that the carbon source and synthetic procedures diversely affect the structural and optical properties of the CDs, which in turn unpredictably influence their photo electron transfer ability. The latter was evaluated by studying the photo-reduction of methyl viologen. Overall, citric acid-CDs were found to provide the best photocatalytic performance followed by fructose- and glucose-CDs. However, while the graphitization of glucose- and citric acid-CDs favored the photo-reaction, a reverse structure-activity dependence was observed for fructose-CDs due to the formation of a large graphitic-like supramolecular assembly. This study highlights the complexity to design in advance photo-active bio-based carbon nanomaterials.

Carbon Dots from Sugars and Ascorbic Acid: Role of the Precursors on Morphology, Properties, Toxicity, and Drug Uptake.

There is the need for reproducible, simple, high-yielding synthetic protocols aimed at obtaining carbon dots (CDs) with controlled fluorescence, photothermal and photochemical behavior, surface properties, biocompatibility, tumor targeting ability, drug absorption biodistribution, and tumor uptake. This Letter describes a systematic study on the effect of glucose, fructose, and ascorbic acid as starting materials for the preparation of highly luminescent CDs, characterized by a blue emission. Their composition and morphology are investigated by titration of OH surface groups, spectroscopic techniques, and high-resolution transmission electron microscopy (HR-TEM), and their toxicity was tested toward HeLa cells. CDs made using fructose were toxic, while those made from glucose and ascorbic acid showed good biocompatibility. The reproducible and simple synthetic procedure yields luminescent biomass-derived CDs for combined cancer therapy and diagnostics. Their doxorubicin (DOX) drug uptake was measured by spectrofluorimetry, indicating a crucial role of the morphologies of the CDs in controlling DOX loading. The glucose derived CDs showed up to 28% w/w of DOX loading.

Bottom-up synthesis of carbon nanoparticles with higher doxorubicin efficacy.

Nanomedicine requires intelligent and non-toxic nanomaterials for real clinical applications. Carbon materials possess interesting properties but with some limitations due to toxic effects. Interest in carbon nanoparticles (CNPs) is increasing because they are considered green materials with tunable optical properties, overcoming the problem of toxicity associated with quantum dots or nanocrystals, and can be utilized as smart drug delivery systems. Using black tea as a raw material, we synthesized CNPs with a narrow size distribution, tunable optical properties covering visible to deep red absorption, non-toxicity and easy synthesis for large-scale production. We utilized these CNPs to label subcellular structures such as exosomes. More importantly, these new CNPs can escape lysosomal sequestration and rapidly distribute themselves in the cytoplasm to release doxorubicin (doxo) with better efficacy than the free drug. The release of doxo from CNPs was optimal at low pH, similar to the tumour microenvironment. These CNPs were non-toxic in mice and reduced the tumour burden when loaded with doxo due to an improved pharmacokinetics profile. In summary, we created a new delivery system that is potentially useful for improving cancer treatments and opening a new window for tagging microvesicles utilized in liquid biopsies.

Formation and Controlled Growth of Bismuth Titanate Phases into Mesoporous Silica Nanoparticles: An Efficient Self-Sealing Nanosystem for UV Filtering in Cosmetic Formulation.

The application of nanosized inorganic UV filters in cosmetic field is limited by their high photocatalytic properties that could induce the degradation or dangerous transformation of the organic molecules in sunscreen formulations. To overcome this problem and simultaneously enlarge the window of filter's absorption, we propose the growth of bismuth titanates BixTiyOz into mesoporous silica nanoparticles (MSN). We investigated the chemical-physical properties by means of XRPD, TEM, UV-vis spectroscopy, N2 physisorption, XPS, and SF-ICP-MS analysis, while the influence on the environment was evaluated through photocatalytic tests. The growing process of this new nanosystem is discussed underlining the key role of the Bi3+ ion that, acting as a low-melting point agent for the silica framework, led to a self-sealing mechanism. The excellent UV shielding properties combined with a radical suppression of the photocatalytic activity make the proposed nanosystem a perfect candidate for the development of the next generation nanomaterials for sunscreen formulations.

Biocompatible tailored zirconia mesoporous nanoparticles with high surface area for theranostic applications.

Nanocarriers as theranostic agents are under the spotlight in modern nanomedicine, and mesoporous nanomaterials represent a class of devices of major interest. Zirconia is biocompatible, inert with good mechanical and thermal properties for in vivo biomedical applications. Although a few examples of zirconia nanoparticles have been described, a major limitation was the low surface area, which is fundamental for payload transport. Here, a simple and highly efficient method is described for the synthesis of spherical mesoporous zirconia nanoparticles (MZNs) with a high surface area through a neutral surfactant-assisted sol-gel method. The combination of alkali halides and vacuum extraction allowed stabilization of the shape and size of MZNs and to avoid porous network failure, respectively. In comparison to published synthesis procedures, a high surface area has been obtained. Biological experiments demonstrated that MZNs were biocompatible, cell permeable and degradable providing a proof of concept for theranostic applications. A comparison with the properties of mesoporous silica nanoparticles has also been performed.

Structural and photophysical properties of rare-earth complexes encapsulated into surface modified mesoporous silica nanoparticles.

The encapsulation of [Eu(dbm)3phen] into functionalized mesoporous silica nanoparticles (MSN) has been carried out to study the effect of chemical environments on the photoluminescence properties of the rare-earth complex. Surface functionalization was achieved by the reaction of the silanol groups on the surface of mesoporous silica with different organosilylating agents such as (3-aminopropyl)-triethoxysilane (APTES), (3-mercaptopropyl)-trimethoxysilane (MPTMS), and ethoxytrimethylsilane (ETMS). A change in the luminescence properties of the Eu(dbm)3phen complex has been observed on its encapsulation into surface modified mesoporous silica nanoparticles. The modification of photophysical properties is attributed to the interaction of Eu(dbm)3phen with the different chemical environments in the functionalized mesoporous silica nanoparticles (MSN). The luminescence properties of the rare-earth complex in surface-modified MSN increase in the order MSN < MSN-ETMS < MSN-MPTMS < MSN-APTES. The Eu(dbm)3phen complex encapsulated in the functionalized mesoporous silica nanoparticles shows an enhanced luminescence and an increased lifetime compared to the pure rare-earth complex in the solid state and that in unmodified MSN. This implies that some interactions of the lanthanide complexes take place during their incorporation process into the organically modified mesoporous silica nanoparticles. The organically modified mesoporous silica nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR) and N2 adsorption desorption measurements. The luminescence properties of the encapsulated Eu(dbm)3phen were studied in detail. Moreover, the effect of functionalized MSNs on the structural behaviour of the Eu(dbm)3phen was investigated by solid state nuclear magnetic resonance (SSNMR) techniques using an analogous diamagnetic model complex, Y(dbm)3phen, encapsulated into functionalized MSNs. These studies indicate that the encapsulated rare-earth complex shows some interactions with the functional groups anchored on the surface of MSNs.

Unexpected optical activity of cerium in Y2O3:Ce3+, Yb3+, Er3+ up and down-conversion system.

In this work we synthesized rare earth-doped yttria nanocrystals via the Pechini method. We used Ce(3+), Yb(3+) and Er(3+) as dopant ions and studied their behavior when they are simultaneously embedded in the yttrium oxide lattice. The tri-doped system exhibits both downshifting and up-converting properties, due to the presence of, respectively, cerium-erbium and ytterbium-erbium couples. Efforts were put into determination of the effects of the presence of increasing content of cerium. We synthesized a series of samples having the general formula (Y0.88-xCexYb0.1Er0.02)2O3, where x = 0.01, 0.02, 0.10, 0.20, and 0.40. The structural properties of the samples were analyzed by the X-ray powder diffraction (XRPD) technique and the morphological features were disclosed using transmission electron microscope (TEM) observations. Photoluminescence properties were tested by carrying out photoluminescence (PL) emission, photoluminescence excitation (PLE) and lifetime (LT) measurements.

Renewable H2 from glycerol steam reforming: effect of La2O3 and CeO2 addition to Pt/Al2O3 catalysts.

Glycerol is the main byproduct of biodiesel production and its increased production volume derives from the increasing demand for biofuels. The conversion of glycerol to hydrogen-rich mixtures presents an attractive route towards sustainable biodiesel production. Here we explored the use of Pt/Al(2)O(3)-based catalysts for the catalytic steam reforming of glycerol, evidencing the influence of La(2)O(3) and CeO(2) doping on the catalyst activity and selectivity. The addition of the latter metal oxides to a Pt/Al(2)O(3) catalyst is found to significantly improve the glycerol steam reforming, with high H(2) and CO(2) selectivities. A good catalytic stability is achieved for the Pt/La(2)O(3)/Al(2)O(3) system working at 350 degrees C, while the Pt/CeO(2)/Al(2)O(3) catalyst sharply deactivates after 20 h under similar conditions. Studies carried out on fresh and exhausted catalysts reveal that both systems maintain high surface areas and high Pt dispersions. Therefore, the observed catalyst deactivation can be attributed to coke deposition on the active sites throughout the catalytic process and only marginally to Pt nanoparticle sintering. This work suggests that an appropriate support composition is mandatory for preparing high-performance Pt-based catalysts for the sustainable conversion of glycerol into syngas.