RESUMEN
While cavitation has been suspected as a mechanism of blast-induced traumatic brain injury (bTBI) for a number of years, this phenomenon remains difficult to study due to the current inability to measure cavitation in vivo. Therefore, numerical simulations are often implemented to study cavitation in the brain and surrounding fluids after blast exposure. However, these simulations need to be validated with the results from cavitation experiments. Machine learning algorithms have not generally been applied to study blast injury or biological cavitation models. However, such algorithms have concrete measures for optimization using fewer parameters than those of finite element or fluid dynamics models. Thus, machine learning algorithms are a viable option for predicting cavitation behavior from experiments and numerical simulations. This paper compares the ability of two machine learning algorithms, k-nearest neighbor (kNN) and support vector machine (SVM), to predict shock-induced cavitation behavior. The machine learning models were trained and validated with experimental data from a three-dimensional shock tube model, and it has been shown that the algorithms could predict the number of cavitation bubbles produced at a given temperature with good accuracy. This study demonstrates the potential utility of machine learning in studying shock-induced cavitation for applications in blast injury research.
RESUMEN
Nucleus pulposus (NP) tissue in the intervertebral disc (IVD) is a viscoelastic material exhibiting both solid- and fluid-like mechanical behaviors. Advances in viscoelastic models incorporating fractional calculus, such as the Fractional Zener (FZ) model, have potential to describe viscoelastic behaviors. The objectives of this study were to determine whether the FZ model can accurately describe the shear viscoelastic properties of NP tissue and determine if the fractional order (α) is related to tissue hydration. 30 caudal IVDs underwent equilibrium dialysis in 5% or 25% polyethylene glycol solutions to alter tissue hydration. Excised NP tissue underwent stress relaxation testing in shear and unconfined compression. Stress relaxation data was fitted to the FZ model to obtain viscoelastic properties. In both loading modes, the initial modulus was greater for the less hydrated 25% equilibrated samples compared to 5% with no change in the equilibrium modulus. Samples with lower water content (25% samples) had shorter relaxation times in shear and longer time constants in compression, highlighting the different interactions between the fluid and solid matrix in loading modes. Samples with lower water content had α values closer to 0, indicating that less hydrated samples behaved more solid-like on the viscoelastic spectrum. Tissue hydration correlated with α values for 25% samples in shear. This study demonstrates that the FZ model may be used to describe IVD tissue behavior under both loading modes; however, the greatest utility of the FZ model is in describing flow-independent shear behaviors, and α may inform tissue hydration in shear.
Asunto(s)
Disco Intervertebral , Núcleo Pulposo , Elasticidad , Estrés Mecánico , AguaRESUMEN
Transcranial Magnetic Stimulation (TMS) is a tool for the treatment of psychiatric and neurological disorders. It involves using a transient magnetic field generated from electromagnetic coils in inducing an electric field (E-field) within the neurons of the brain. The induced E-field results in an increase in the brain membrane's electric potential, leading to polarization or depolarization of the neurons depending on the mode of treatment. There has been much development in TMS technology recently, with most research focusing on improving the performance of TMS coils at greater depths and achieving more localized stimulation. Another development has been the combination of TMS with other medical techniques such as Functional Magnetic Resonance Imaging (fMRI) and Electroencephalography (EEG) to enable accurate mapping of the brain's electrical activity during TMS. However, the TMS coils experience large forces in this new highly energized external magnetic field environment. Accurately determining the magnitude and location of the Lorentz force, torque, and stresses that the TMS coils experience in this environment becomes of utmost importance. In this chapter, the authors used finite element analysis to determine the magnitude and location of the Lorentz forces and stresses experienced by a novel TMS coil, Quadruple Butterfly Coil (QBC), in a TMS-fMRI operation. With the TMS-fMRI operation, the maximum values of the magnetic flux density, Lorentz force density, and von Mises stress were observed in the z-axis of the QBC orientation. They resulted in a 39.65 %, 38.94 %, and 94.59 % increase, respectively, from the typical TMS operation.
Asunto(s)
Estimulación Magnética Transcraneal , Animales , Encéfalo/diagnóstico por imagen , Cabeza , Humanos , Imagen por Resonancia MagnéticaRESUMEN
Transcranial Magnetic Stimulation (TMS) is a modulation tool that is non-invasive and used to treat neuropsychiatric disorders. Over the last decade, TMS has been approved by the United States Food and Drug Administration (FDA) for the treatment of Major Depressive Disorders (MDD) and Obsessive-Compulsive Disorder (OCD). TMS is based on Faraday's law of electromagnetic induction, involving the generation of time-varying magnetic fields from electromagnetic coils when intense pulses of current flow through the coils. This transient magnetic field, in turn, induces an electric field within the brain, which results in excitation or inhibition of the brain's neurons. Several coil designs have been proposed for achieving targeted stimulation at great depth within the brain. With the advancement in TMS technology, there is a need for preclinical studies and testing of proposed coil designs. Using animal models to conduct these preclinical studies becomes of utmost importance, especially since a successful animal trial precedes a human clinical trial. In this research, the authors model six different coil designs for an anatomically heterogeneous adult pig model. The magnetic field intensity, H (A/m), and electric field intensity, E (V/m), were calculated and compared for each coil configuration. The maximum induced electric field in the scalp and brain (grey matter) were compared for all the different coil configurations. The electric field distribution as a function of depth within the brain was also compared for the different coil configurations.Clinical Relevance- This study will be beneficial to TMS coil designers and researchers to treat neuropsychiatric disorders and in the preclinical development of TMS coils. Results from studies with pig models are easy to compare with that of humans, and this will help to guide our understanding of the mechanism of TMS.
Asunto(s)
Trastorno Depresivo Mayor , Estimulación Magnética Transcraneal , Animales , Encéfalo , Trastorno Depresivo Mayor/terapia , Sustancia Gris , Cabeza , Porcinos , Estados UnidosRESUMEN
Fabricating hydrogel scaffolds that are both bioreactive toward fibroblasts while still mechanically compatible with surrounding tissue is a major challenge in tissue engineering. This is because the outcome of scaffold implantation is largely determined by fibroblasts differentiating toward myofibroblasts, which is characterized by the expression of α-smooth muscle actin (α-SMA). Previous studies promoted fibroblasts differentiation by increasing scaffold substrate stiffness. However, the stiffness of scaffold has to be compatible with surrounding tissue, as mismatched stiffness may cause initial hyperplasia and inappropriate endothelial layer development. Therefore, we adjusted the hydrogel chemical component, and thus viscoelasticity to affect the mechano-signaling of fibroblasts and promote fibroblasts differentiation. Elastic gellan gum and viscoelastic gelatin were hybridized at different ratios to fabricate hydrogel scaffold with varied stress-relaxation. Vitronectin (VN) was used to further regulate the interaction between fibroblasts and the substrate. Fibroblast differentiation, characterized by α-SMA area per cell, increased from~3000-4000 µm2/cell on less viscoelastic gels to ~5000 µm2/cell on the most viscoelastic gel. Fibroblasts seeded on hydrogels had a slower migration rate on more viscoelastic hydrogels (slowest at 38 ± 14 µm/h) compared to the migration speed on less viscoelastic hydrogels (74 ± 20 µm/h). VN slowed the migration speed on all hydrogels. The organization of collagen deposited by fibroblasts cultured on the hydrogels was characterized by second harmonic generation (SHG), which showed that collagen was more organized (parallel) on more viscoelastic hydrogels. In summary, we provided a novel strategy to fabricate hydrogel scaffolds that can promote fibroblasts differentiation while keeping the stiffness compatible with blood vessels. The most viscoelastic hydrogel studied here meets these requirements best.
Asunto(s)
Gelatina , Hidrogeles , Diferenciación Celular , Fibroblastos , Hidrogeles/farmacología , Polisacáridos Bacterianos , Andamios del TejidoRESUMEN
Sutures are ubiquitous medical devices for wound closures in human and veterinary medicine, and suture techniques are frequently evaluated by comparing tensile strengths in ex vivo studies. Direct and nondestructive measurement of tensile force present in sutured biological skin tissue is a key challenge in biomechanical fields because of the unique and complex properties of each sutured skin specimen and the lack of compliant sensors capable of monitoring large levels of strain. The authors have recently proposed a soft elastomeric capacitor (SEC) sensor that consists of a highly compliant and scalable strain gauge capable of transducing geometric variations into a measurable change in capacitance. In this study, corrugated SECs are used to experimentally characterize the inherent biomechanical properties of canine skin specimens. In particular, an SEC corrugated with a re-entrant hexagonal honeycomb pattern is studied to monitor strain and stresses for three specific suture patterns: simple interrupted, cruciate, and intradermal patterns. Stress is estimated using constitutive models based on the Fractional Zener and the Kelvin-Voigt models, parametrized using a particle swarm algorithm from experimental data and results from a validated finite element model. Results are benchmarked against findings from the literature and show that SECs are valuable for clinical evaluation of tensile force in biological skins. It was found that both the ranking of suture pattern performance and the sutured skin's Young's modulus using the proposed approach agreed with data reported in the literature and that the estimated stress at the suture level closely matched that of an approximate finite element model.
Asunto(s)
Técnicas de Sutura , Suturas , Animales , Fenómenos Biomecánicos , Perros , Elasticidad , Humanos , Resistencia a la TracciónRESUMEN
Improvised explosive devices (IEDs), during military operations, has increased the incidence of blast-induced traumatic brain injuries (bTBI). The shock wave is created following detonation of the IED. This shock wave propagates through the atmosphere and may cause bTBI. As a result, bTBI research has gained increased attention since this injury's mechanism is not thoroughly understood. To develop better protection and treatment against bTBI, further studies of soft material (e.g. brain and brain surrogate) deformation due to shock wave exposure are essential. However, the dynamic mechanical behavior of soft materials, subjected to high strain rates from shock wave exposure, remains unknown. Thus, an experimental approach was applied to study the interaction between the shock wave and an unconfined brain surrogate fabricated from a biomaterial (i.e. polydimethylsiloxane (PDMS)). The 1:70 ratio of curing agent-to-base determined the stiffness of the PDMS (Sylgard 184, Dow Corning Corporation). A stretched NACA 2414 (upper airfoil surface) geometry was utilized to resemble the shape of a porcine brain. Digital image correlation (DIC) technique was applied to measure the deformation on the brain surrogate's surface following shock wave exposure. A shock tube was utilized to create the shock wave and pressure transducers measured the pressure in the vicinity of the brain surrogate. A transient structural analysis using ANSYS Workbench was performed to predict the elastic modulus of 1:70 airfoil-shaped PDMS, at a strain rate on the order of 6 × 103 s-1. Both compression and protrusion of the PDMS surface were found due to the shock wave exposure. Negative pressure was found in a semi-ring area, which was the cause of protrusion. Oscillation of the brain surrogate, due to the shock wave loading, was found. The frequency of oscillation does not depend on the geometry. This work will add to the limited data describing the dynamic behavior of soft materials due to shock wave loading.
Asunto(s)
Traumatismos por Explosión , Lesiones Traumáticas del Encéfalo , Lesiones Encefálicas , Animales , Encéfalo , Explosiones , PorcinosRESUMEN
Cavitation has gained popularity in recent years as a potential mechanism of blast-induced traumatic brain injury (bTBI). This review presents the most prominent debates on cavitation; how bubbles can form or exist within the cerebrospinal fluid (CSF) and brain vasculature, potential mechanisms of cellular, and tissue level damage following the collapse of bubbles in response to local pressure fluctuations, and a survey of experimental and computational models used to address cavitation research questions. Due to the broad and varied nature of cavitation research, this review attempts to provide a necessary synthesis of cavitation findings relevant to bTBI, and identifies key areas where additional work is required. Fundamental questions about the viability and likelihood of CSF cavitation during blast remain, despite a variety of research regarding potential injury pathways. Much of the existing literature on bTBI evaluates cavitation based off its prima facie plausibility, while more rigorous evaluation of its likelihood becomes increasingly necessary. This review assesses the validity of some of the common assumptions in cavitation research, as well as highlighting outstanding questions that are essential in future work.
RESUMEN
Recent advances in hyperelastic materials and self-sensing sensor designs have enabled the creation of dense compliant sensor networks for the cost-effective monitoring of structures. The authors have proposed a sensing skin based on soft polymer composites by developing soft elastomeric capacitor (SEC) technology that transduces geometric variations into a measurable change in capacitance. A limitation of the technology is in its low gauge factor and lack of sensing directionality. In this paper, we propose a corrugated SEC through surface texture, which provides improvements in its performance by significantly decreasing its transverse Poisson's ratio, and thus improving its sensing directionality and gauge factor. We investigate patterns inspired by auxetic structures for enhanced unidirectional strain monitoring. Numerical models are constructed and validated to evaluate the performance of textured SECs, and to study their performance at monitoring strain on animal skin. Results show that the auxetic patterns can yield a significant increase in the overall gauge factor and decrease the stress experienced by the animal skin, with the re-entrant hexagonal honeycomb pattern outperforming all of the other patterns.
Asunto(s)
Piel , Animales , Elasticidad , PolímerosRESUMEN
Over the last 15 years, research on canid cognition has revealed that domestic dogs possess a surprising array of complex sociocognitive skills pointing to the possibility that the domestication process might have uniquely altered their brains; however, we know very little about how evolutionary processes (natural or artificial) might have modified underlying neural structure to support species-specific behaviors. Evaluating the degree of cortical folding (i.e., gyrification) within canids may prove useful, as this parameter is linked to functional variation of the cerebral cortex. Using quantitative magnetic resonance imaging to investigate the impact of domestication on the canine cortical surface, we compared the gyrification index (GI) in 19 carnivore species, including six wild canid and 13 domestic dog individuals. We also explored correlations between global and local GI with brain mass, cortical thickness, white and gray matter volume and surface area. Our results indicated that GI values for domestic dogs are largely consistent with what would be expected for a canid of their given brain mass, although more variable than that observed in wild canids. We also found that GI in canids is positively correlated with cortical surface area, cortical thickness and total cortical gray matter volumes. While we found no evidence of global differences in GI between domestic and wild canids, certain regional differences in gyrification were observed.
Asunto(s)
Canidae/anatomía & histología , Corteza Cerebral/anatomía & histología , Corteza Cerebral/fisiología , Domesticación , Sustancia Gris/anatomía & histología , Sustancia Gris/fisiología , Sustancia Blanca/anatomía & histología , Sustancia Blanca/fisiología , Animales , Animales Salvajes/anatomía & histología , Animales Salvajes/fisiología , Evolución Biológica , Grosor de la Corteza Cerebral , Mapeo Encefálico , Corteza Cerebral/diagnóstico por imagen , Cognición , Perros , Sustancia Gris/diagnóstico por imagen , Procesamiento de Imagen Asistido por Computador/métodos , Imagen por Resonancia Magnética , Especificidad de la Especie , Sustancia Blanca/diagnóstico por imagenRESUMEN
Finite element (FE) method has been widely used for gaining insights into the mechanical response of brain tissue during impacts. In this study, a coupled Eulerian-Lagrangian (CEL) formulation is implemented in impact simulations of a head system to overcome the mesh distortion difficulties due to large deformation in the cerebrospinal fluid (CSF) region and provide a biofidelic model of the interaction between the brain and skull. The head system used in our FE model is constructed from the transverse section of the human brain, with CSF modeled by Eulerian elements. Spring connectors are applied to represent the pia-arachnoid connection between the brain and skull. Validations of the CEL formulation and the FE model are performed using the experimental results. The dynamic response of brain tissue under noncontact impacts and the brain regions susceptible to injury are evaluated based on the intracranial pressure (ICP), maximum principal strain (MPS), and von Mises stress. While tracking the critical MPS location on the brain, higher likelihood of contrecoup injury than coup injury is found when sudden brain-skull motion takes place. The accumulation effect of CSF in the ventricle system, under large relative brain-skull motion, is also identified. The FE results show that adding relative angular velocities, to the translational impact model, not only causes a diffuse high strain area, but also cause the temporal lobes to be susceptible to cerebral contusions since the protecting CSF is prone to be squeezed away at the temporal sites due to the head rotations.
Asunto(s)
Lesiones Encefálicas , Simulación por Computador , Análisis de Elementos Finitos , Cabeza , Humanos , CráneoRESUMEN
Traumatic brain injuries (TBI) affect millions of people each year. While research has been dedicated to determining the mechanical properties of the uninjured brain, there has been a lack of investigation on the mechanical properties of the brain after experiencing a primary blast-induced TBI. In this paper, whole porcine brains were exposed to a shock wave to simulate blast-induced TBI. First, ten (10) brains were subjected to unconfined compression experiments immediately following shock wave exposure. In addition, 22 brains exposed to a shock wave were placed in saline solution and refrigerated between 30 minutes and 6.0 hours before undergoing unconfined compression experiments. This study aimed to investigate the effect of a time delay on the viscoelastic properties in the event that an experiment cannot be completed immediately. Samples from both soaked and freshly extracted brains were subjected to compressive rates of 5, 50, and 500â¯mm/min during the unconfined compression experiments. The fractional Zener (FZ) viscoelastic model was applied to obtain the brain's material properties. The length of time in the solution statistically influenced three of the four FZ coefficients, E0 (instantaneous elastic response), τ0 (relaxation time), and α (fractional order). Further, the compressive rate statistically influenced τ0 and α.
Asunto(s)
Traumatismos por Explosión/fisiopatología , Lesiones Traumáticas del Encéfalo/fisiopatología , Encéfalo/fisiopatología , Explosiones , Animales , Fenómenos Biomecánicos , Encéfalo/diagnóstico por imagen , Calibración , Fuerza Compresiva , Simulación por Computador , Elasticidad , Modelos Biológicos , Modelos Estadísticos , Reología , Programas Informáticos , Estrés Mecánico , Porcinos , ViscosidadRESUMEN
Traumatic brain injuries (TBI) affect millions of people each year and can result in long-term difficulties in thinking or focusing. Due to the number of people affected by these injuries, significant research has been dedicated to determining the mechanical properties of the brain using postmortem tissue from animals harvested within 24â¯h. The postmortem brain tissue is often stored in a solution until a rheological experiment is ready to begin. However, the effect of storage duration on the mechanical behavior of brain tissue is not understood. In this paper, postmortem porcine brains were placed in normal saline solution (0.9% NaCl) and refrigerated between 30â¯min and 6.5â¯h to allow the brain to absorb the solution. Afterwards, samples from both soaked and freshly extracted brains were subjected to unconfined compression tests at compressive rates of 5, 50, and 500â¯mm/min. The fractional Zener viscoelastic model was applied to obtain the brain's mechanical properties. While the results did not show a significant relationship between absorption and the long-term stiffness (E∞), both the relaxation time (τ0) and fractional order (α) were statistically influenced by both the length of time in the solution and compressive rate. Further, the instantaneous stiffness (E0) was statistically influenced by the length of time in solution, though not the compressive rate.
Asunto(s)
Lesiones Traumáticas del Encéfalo/patología , Encéfalo/patología , Solución Salina/química , Animales , Fenómenos Biomecánicos , Fuerza Compresiva , Elasticidad , Ensayo de Materiales , Presión , Manejo de Especímenes , Estrés Mecánico , Porcinos , ViscosidadRESUMEN
The ongoing conflict against terrorism has resulted in an escalation of blast-induced traumatic brain injuries (bTBI) caused by improvised explosive devices (IEDs). The destructive IEDs create a blast wave that travels through the atmosphere. Blast-induced traumatic brain injuries, attributed to the blast wave, can cause life-threatening injuries and fatalities. This study aims to find a surrogate brain material for assessing the effectiveness of head protection systems designed to mitigate bTBI. Polydimethylsiloxane (PDMS) is considered as the surrogate brain material. The stiffness of PDMS (Sylgard 184, Dow Corning Corp.) can be controlled by varying the ratio of base and curing agent. Cylindrical PDMS specimen with ratios of 1:10, 1:70, and 1:80 were subjected to unconfined compression experiments at linear rates of 5â¯mm/min, 50â¯mm/min, and 500â¯mm/min. A ramp-hold strain profile was used to simulate a stress relaxation experiment. The fractional Zener viscoelastic model was used to describe the stress relaxation response, after optimization of the material constants for the brain surrogate and shock wave exposure brain tissue. The results show that the low cost PDMS can be used as a surrogate brain material to study the dynamic brain response to blast wave exposure.
Asunto(s)
Biomimética/instrumentación , Encéfalo , Fenómenos Mecánicos , Elastómeros de Silicona , Ensayo de MaterialesRESUMEN
With their high degree of specificity and investigator control, in vitro disease models provide a natural complement to in vivo models. Especially in organs such as the brain, where anatomical limitations make in vivo experiments challenging, in vitro models have been increasingly used to mimic disease pathology. However, brain mimetic models may not fully replicate the mechanical environment in vivo, which has been shown to influence a variety of cell behaviors. Specifically, many disease models consider only the linear elastic modulus of brain, which describes the stiffness of a material with the assumption that mechanical behavior is independent of loading rate. Here, we characterized porcine brain tissue using a modified stress relaxation test, and across a panel of viscoelastic models, showed that stiffness depends on loading rate. As such, the linear elastic modulus does not accurately reflect the viscoelastic properties of native brain. Among viscoelastic models, the Maxwell model was selected for further analysis because of its simplicity and excellent curve fit (R2 = 0.99 ± 0.0006). Thus, mechanical response of native brain and hydrogel mimetic models was analyzed using the Maxwell model and the linear elastic model to evaluate the effects of strain rate, time post mortem, region, tissue type (i.e., bulk brain vs white matter), and in brain mimetic models, hydrogel composition, on observed mechanical properties. In comparing the Maxwell and linear elastic models, linear elastic modulus is consistently lower than the Maxwell elastic modulus across all brain regions. Additionally, the Maxwell model is sensitive to changes in viscosity and small changes in elasticity, demonstrating improved fidelity. These findings demonstrate the insufficiency of linear elastic modulus as a primary mechanical characterization for brain mimetic materials and provide quantitative information toward the future design of materials that more closely mimic mechanical features of brain.
RESUMEN
The ability of the fractional Zener constitutive model to predict the behavior of postmortem swine brain tissue was examined in this work. Understanding tissue behavior attributed to degradation is invaluable in many fields such as the forensic sciences or cases where only cadaveric tissue is available. To understand how material properties change with postmortem age, the fractional Zener model was considered as it includes parameters to describe brain stiffness and also the parameter α, which quantifies the viscoelasticity of a material. The relationship between the viscoelasticity described by α and tissue degradation was examined by fitting the model to data collected in a previous study (Bentil, 2013). This previous study subjected swine neural tissue to in vitro unconfined compression tests using four postmortem age groups (<6h, 24h, 3 days, and 1 week). All samples were compressed to a strain level of 10% using two compressive rates: 1mm/min and 5mm/min. Statistical analysis was used as a tool to study the influence of the fractional Zener constants on factors such as tissue degradation and compressive rate. Application of the fractional Zener constitutive model to the experimental data showed that swine neural tissue becomes less stiff with increased postmortem age. The fractional Zener model was also able to capture the nonlinear viscoelastic features of the brain tissue at low strain rates. The results showed that the parameter α was better correlated with compressive rate than with postmortem age.
Asunto(s)
Encéfalo/citología , Modelos Biológicos , Estrés Mecánico , Porcinos , Animales , Fenómenos Biomecánicos , Elasticidad , Humanos , ViscosidadRESUMEN
Cells sense and respond to the rigidity of their microenvironment by altering their morphology and migration behavior. To examine this response, hydrogels with a range of moduli or mechanical gradients have been developed. Here, we show that edge effects inherent in hydrogels supported on rigid substrates also influence cell behavior. A Matrigel hydrogel was supported on a rigid glass substrate, an interface which computational techniques revealed to yield relative stiffening close to the rigid substrate support. To explore the influence of these gradients in 3D, hydrogels of varying Matrigel content were synthesized and the morphology, spreading, actin organization, and migration of glioblastoma multiforme (GBM) tumor cells were examined at the lowest (<50 µm) and highest (>500 µm) gel positions. GBMs adopted bipolar morphologies, displayed actin stress fiber formation, and evidenced fast, mesenchymal migration close to the substrate, whereas away from the interface, they adopted more rounded or ellipsoid morphologies, displayed poor actin architecture, and evidenced slow migration with some amoeboid characteristics. Mechanical gradients produced via edge effects could be observed with other hydrogels and substrates and permit observation of responses to multiple mechanical environments in a single hydrogel. Thus, hydrogel-support edge effects could be used to explore mechanosensitivity in a single 3D hydrogel system and should be considered in 3D hydrogel cell culture systems.
Asunto(s)
Técnicas de Cultivo de Célula/métodos , Glioblastoma/patología , Actinas/metabolismo , Adhesión Celular , Movimiento Celular , Proliferación Celular , Forma de la Célula , Microambiente Celular , Colágeno/química , Combinación de Medicamentos , Módulo de Elasticidad , Matriz Extracelular/metabolismo , Vidrio/química , Glioblastoma/metabolismo , Humanos , Hidrogeles/química , Laminina/química , Mecanotransducción Celular , Proteoglicanos/química , Células Tumorales CultivadasRESUMEN
The efficiency of gene therapy as a pretreatment for saphenous vein coronary artery bypass grafts can be improved by increasing the transport of vector into the tunica media. The purpose of this study was to determine the effect of increasing transmural pressure on vector delivery depth in human saphenous vein segments. Specifically, we introduced adenovirus-sized microspheres luminally to observe changes in transport efficiency into the intimal and medial layers with increasing pressure. Our results indicate that transmural pressures of 100 and 400 mmHg increase the intimal concentration of microspheres as compared to 0 mmHg (p < 0.03), but do not significantly affect medial concentrations. We did not find increasing concentrations with increasing pressure above 100 mmHg. These results suggest that low or intermediate transmural pressures are adequate for intimal vector delivery and that techniques other than increasing pressure are required to deliver gene therapy vectors (> or = 100 nm) to medial smooth muscle cells. Also, our data support previous models designating the internal elastic lamina as the primary barrier to particle transport. Finally, our ex vivo microsphere perfusion experiment represents a novel way to explore functional vein permeabilities to gene therapy vectors and, ultimately, optimize vascular gene therapy protocols.
Asunto(s)
Adenoviridae/genética , ADN Viral/administración & dosificación , ADN Viral/farmacocinética , Terapia Genética/métodos , Vena Safena/metabolismo , Transfección/métodos , Transporte Biológico Activo/fisiología , Técnicas de Transferencia de Gen , Vectores Genéticos/administración & dosificación , Vectores Genéticos/farmacocinética , Humanos , Técnicas In Vitro , Microesferas , PresiónRESUMEN
In this study, we sought to characterize functional signaling domains by applying the multiresolution properties of the continuous wavelet transform to fluorescence resonance energy transfer (FRET) microscopic images of plasma membranes. A genetically encoded FRET reporter of protein kinase C (PKC)-dependent phosphorylation was expressed in COS1 cells. Differences between wavelet coefficient matrices revealed several heterogeneous domains (typically ranging from 1 to 5 microm), reflecting the dynamic balance between PKC and phosphatase activity during stimulation with phorbol-12,13-dibutyrate or acetylcholine. The balance in these domains was not necessarily reflected in the overall plasma membrane changes, and observed heterogeneity was absent when cells were exposed to a phosphatase or PKC inhibitor. Prolonged exposure to phorbol-12,13-dibutyrate and acetylcholine yielded more homogeneous FRET distribution in plasma membranes. The proposed wavelet-based image analysis provides, for the first time, a basis and a means of detecting and quantifying dynamic changes in functional signaling domains, and may find broader application in studying fine aspects of cellular signaling by various imaging reporters.