RESUMEN
Functionalization of polyolefins, in particular polyisobutylene, remains a relatively unexplored application for the Michael reaction. This work evaluates the potential of polyisobutylene acrylate (PIBA) chain-end modification via organocatalyzed thiol-Michael and aza-Michael additions. A series of chain-end functional polyisobutylene oligomers are prepared using "click" reactions of thiols or amines to PIBA in the presence of 0.02 equivalents of organocatalyst. Reaction kinetics and chain-end transformations are monitored using NMR spectroscopy and the macromolecular products are characterized by size exclusion chromatography. Further potential of this synthetic strategy is illustrated by thiol-Michael addition of thiols formed in situ via nucleophilic thiolactone ring opening. The obtained results provide an efficient method for the preparation of functional polyisobutylene oligomers that can be utilized in a broad range of potential applications.
Asunto(s)
Polímeros , Compuestos de Sulfhidrilo , Aminas , PolienosRESUMEN
This paper describes chemistry using organocatalysts in hydrocarbon solvents that minimizes solvent waste by using inexpensive, non-volatile, relatively inflammable, and easily recyclable poly(α-olefin)s (PAOs) as hydrocarbon solvents. These studies show that when substrates have limited solubility in PAO solvents, this issue can be addressed by adding a small amount of a cosolvent. Kinetic studies were also carried out and show that reactions carried out in PAOs are kinetically comparable to reactions in conventional non-recyclable hydrocarbon solvents. A range of strategies that separate and isolate products from reactions in PAOs using a polyisobutylene (PIB)-supported DMAP catalyst have been studied using four different catalytic reactions. In the most general procedure, the PAO phase containing a PIB-bound catalyst is separated from products by low energy liquid/liquid gravity separation. This can be accomplished using a minimal amount of a polar solvent. In another example, the product's low solubility leads to it precipitating during the reaction. In this case, a simple filtration recycles the PAO and a PIB-bound DMAP catalyst. We have demonstrated that the PAO phase containing a PIB bound DMAP catalyst can be recycled for at least 10 cycles without loss of activity. Our studies further showed that leaching of the PAO phase into polar solvents was orders of magnitude less than conventional hydrocarbon solvents such as heptane. The result is that the overall solvent waste generation is lower than for the same reaction carried out in conventional solvents.
RESUMEN
Two great blue herons (Ardea herodias) and an anhinga (Anhinga anhinga) were presented to the Wildlife Center of Texas with extensive plumage soiling from polyisobutylene (PIB), a synthetic rubber polymer used in manufacturing. All animals were provided supportive care and sedated for evaluation for hematologic and plasma biochemical values; one of the great blue herons was critically ill, based on the diagnostic evaluations and died approximately 24 hours after admission. On postmortem examination, it was diagnosed with coelomic migration of Eustrongylides species resulting in verminous peritonitis that was likely the primary cause of its poor condition and death, rather than the PIB exposure. Standard decontamination efforts with commercial liquid dish soap were unsuccessful. Application of margarine was used to emulsify the PIB on the remaining 2 birds and was followed by standard wash protocols for successful removal. These animals were successfully released after decontamination. The use of margarine for decontamination of PIB is unreported and could prove useful in future decontamination events in birds and other wildlife when traditional methods to remove hydrocarbon compounds are unsuccessful.
Asunto(s)
Enfermedades de las Aves/terapia , Aves , Margarina , Polienos/envenenamiento , Polímeros/envenenamiento , Contaminantes del Agua/envenenamiento , Animales , Enfermedades de las Aves/sangre , Descontaminación , Intoxicación/terapia , Intoxicación/veterinariaRESUMEN
Low-viscosity poly(α-olefin)s (PAOs) either alone or with functional hydrocarbon oligomer cosolvents are nontoxic, nonvolatile, recyclable solvent systems that effectively and efficiently sequester trace amounts of nonpolar organic compounds such as benzene and halogenated organics from water. More polar compounds including perfluorooctanoic acid and nitrobenzene or water-miscible compounds such as THF and triethylamine can also be sequestered if the PAO phase contains an H-bonding PAO-anchored cosolvent.
RESUMEN
Although SN2 reactions have been thoroughly studied in polar aprotic and protic solvents, not many studies have been done to study the rate of SN2 reaction in nonpolar solvents like alkanes due to the insolubility of anionic nucleophiles in these solvents. In this study, we investigated the use of N,N-diethyl- N-methylammonium-terminated polyisobutylene oligomers as phase-solubilizing agents for nucleophilic anions that could react with hydrocarbon-soluble substrates in alkanes. The results of these kinetic studies showed alkanes were comparable to MeCN as solvents in many reactions. Based on these studies, we developed a solid/liquid catalytic process using insoluble alkali metal carboxylate salts and a recyclable soluble polyisobutylene-bound catalyst that can be used to carry out SN2 reactions both in heptane and in hydrocarbon oligomeric solvents known as poly(α-olefins) (PAOs).
Asunto(s)
Compuestos de Amonio/química , Polienos/química , Polímeros/química , Solventes/química , Catálisis , SolubilidadRESUMEN
The studies described in this paper show that hydrocarbon oligomers are alternatives for low molecular weight alkane solvents. These oligomeric solvents are nontoxic, nonvolatile, and recyclable alternatives to heptane in thermomorphic solvent mixtures that use a polar solvent such as methanol, aqueous ethanol, or DMF or in biphasic mixtures that use acetonitrile. Regardless of which polar solvent is used, hydrocarbon oligomers like poly(α-olefin)s (PAOs) exhibit very low leaching into the polar phase. UV-visible spectroscopy studies show that these solvents have the solubility properties of heptane. For example, PAOs dissolve heptane soluble dyes and quantitatively separate them from polar phases in thermomorphic solvent mixtures. PAOs either as pure solvents or as additives in heptane act as antileaching agents, decreasing the already low leaching of such dyes into a polar phase in heptane/polar solvent mixtures. These oligomeric hydrocarbon solvents were also compared to heptane in studies of azo dye isomerization. The results show that thermal isomerization of an azo dye occurs at the same rate in heptane and a PAO. Further studies of carboxylic acid promoted dye isomerization in heptane and a PAO show that low molecular weight and oligomeric carboxylic acids are kinetically equivalent at accelerating this isomerization. The results suggest that these and other hydrocarbon oligomers behave as solvents like their low molecular weight nonpolar hydrocarbon solvents and that they can be substituted successfully for conventional solvents like heptane.
RESUMEN
Procedures using heptane-phase-selectively soluble octadecyldimethylsilyl groups to facilitate separations and silyl reagent regeneration are described. These results show that alcohols and alkynes protected by these groups are phase-selectively soluble in hydrocarbon solvents. In a thermomorphic cyclohexane/DMF system, >96% of the silylated alcohols are in the cyclohexane phase, allowing these compounds to be purified by a simple liquid/liquid extraction. Applications of these silylating agents in a Grignard synthesis and Sonogashira reaction are described.
RESUMEN
Ruthenium and molybdenum catalysts are widely used in synthesis of both small molecules and macromolecules. While major developments have led to new increasingly active catalysts that have high functional group compatibility and stereoselectivity, catalyst/product separation, catalyst recycling, and/or catalyst residue/product separation remain an issue in some applications of these catalysts. This review highlights some of the history of efforts to address these problems, first discussing the problem in the context of reactions like ring-closing metathesis and cross metathesis catalysis used in the synthesis of low molecular weight compounds. It then discusses in more detail progress in dealing with these issues in ring opening metathesis polymerization chemistry. Such approaches depend on a biphasic solid/liquid or liquid separation and can use either always biphasic or sometimes biphasic systems and approaches to this problem using insoluble inorganic supports, insoluble crosslinked polymeric organic supports, soluble polymeric supports, ionic liquids and fluorous phases are discussed.
RESUMEN
This study describes the use of polyisobutylene (PIB) to phase-anchor pyridine ligands that form a phase-separable Grubbs third-generation catalyst. We further show that this complex is useful in ring-opening metathesis polymerization (ROMP) reactions. These PIB-bound pyridine-ligated Grubbs catalysts provide the same benefits of control over polymer chain growth and polydispersity of the product as their low-molecular-weight analogs and reduce Ru leaching in ROMP products from approximately 16% (820 ppm residues) as seen with a similar pyridine-ligated catalyst to a value of approximately 3% (160 ppm residues). These labile ligands are shown to be as effective at generating separable metal complexes as less labile PIB-functionalized N-heterocyclic carbene catalyst ligands that are typically used for immobilization but that require a multistep synthesis.
RESUMEN
The enforced phase-selective solubility of polyisobutylene (PIB)-bound Rh(II) catalysts in biphasic heptane/acetonitrile mixtures can be used not only to recycle these catalysts but also to minimize bimolecular reactions with ethyl diazoacetate. When cyclopropanation and O-H insertion reactions are carried out with PIB-bound Rh(II) catalysts either with or without addition of an unfunctionalized hydrocarbon polymer cosolvent, dimer by-product formation is suppressed even without slow syringe pump addition of the ethyl diazoacetate. This suppression of by-product formation is shown to be due to increased phase segregation of the soluble polymer-bound catalyst and the ethyl diazoacetate reactant. These studies also reveal that added hydrocarbon polymer cosolvents can function as antileaching agents, decreasing the already small amount of a soluble polymer-bound species that leaches into a polar phase in a biphasic mixture during a liquid/liquid separation step.
RESUMEN
Examples where soluble polymers have been used in homogeneous catalysis were first noted 50 years ago, but this role for soluble polymers remained relatively unexplored until the 1990s. Since then, the use of new polymers, new developments in polymer synthesis, new separation strategies, and the imaginative ways soluble polymers' structure and physical properties can be used to influence a covalent or ligated catalyst have led to increasing interest in soluble polymers as tools in catalysis.
RESUMEN
Polyisobutylene (PIB)-bound ruthenium bipyridine [Ru(PIB-bpy)3]2+ metal complexes were prepared from PIB ligands formed by alkylation of 4,4'-dimethylbipyridine with polyisobutylene bromide. The product Ru(PIB-bpy)3Cl2 complexes with at least one PIB ligand per bipyridine unit function as soluble recyclable photoredox catalysts in free radical polymerization of acrylate monomers under visible light irradiation at 25 °C with ethyl 2-bromoisobutyrate as the initiator in the presence of diisopropylethylamine. The polyacrylate products contained only about 1 ppm Ru contamination. This PIB-bound catalyst was recyclable and showed about 50-fold less Ru leaching as compared to Ru leaching in a polymerization catalyzed by the low molecular weight Ru catalyst, Ru(bpy)3(PF6)2.
RESUMEN
The studies described here show that a relatively low molecular weight, narrow polydispersity polyethylene (PE) wax (Polywax) can serve as a nontoxic and nonvolatile alternative to alkane solvents in monophasic catalytic organic reactions where catalysts and products are separated under biphasic conditions. In this application, a polymer that is a solid at room temperature substitutes for a conventional alkane solvent at ca. 80 °C. In addition to the advantages of being a nonvolatile, nontoxic, reusable solvent, this hydrocarbon polymer solvent, like heptane, can sequester nonpolar soluble polymer-bound catalysts after a reaction and separate them from products. The extent of this separation and its generality were studied using polyisobutylene (PIB)- and poly(4-dodecylstyrene)-bound dyes and PE-bound Pd allylic substitution catalysts, PIB-bound Pd cross-coupling catalysts, and PE- and PIB-bound metathesis catalysts. Catalytic reactions were effected using single-phase reaction mixtures containing Polywax with toluene, THF, or THF/DMF at ca. 80 °C. These solutions either separate into two liquid phases on addition of a perturbing agent or separate as a solid/liquid mixture on cooling. The hydrocarbon polymer-bound dyes or catalysts either separate into the hot liquid Polywax phase or coprecipitate with Polywax and are subsequently isolated as a nonvolatile Polywax solid phase that contains the dye or the recyclable catalyst.
Asunto(s)
Compuestos Organometálicos/química , Compuestos Organometálicos/aislamiento & purificación , Polietileno/química , Catálisis , Estructura Molecular , Paladio/química , Polienos/química , Polímeros/química , Solventes/química , TemperaturaRESUMEN
Pendant groups on polymers that have lower-critical solution temperature (LCST) properties experience a water-like environment below the LCST where the polymer is soluble but are less hydrated above the LCST when the polymer phase separates from solution. When these pendant groups are amphoteric groups like carboxylate salts or ammonium salts, the change in solvation that accompanies the polymer precipitation event significantly changes these groups' acidity or basicity. These changes in acidity or basicity can lead to carboxylate salts forming carboxylic acid groups by capturing protons from the bulk solvent or ammonium salts reverting to the neutral amine by release of protons to the bulk solvent, respectively. When polymers like poly(N-isopropylacrylamide) that contain a sufficient loading of such comonomers are dissolved in solutions whose pH is near the pK(a) of the pendant acid or basic group and undergo an LCST event, the LCST event can change the bulk solution pH. These changes are reversible. These effects were visually followed using common indicators with soluble polymers and or by monitoring solution pH as a function of temperature. LCST events triggered by the addition of a kosmotropic salt lead to similar reversible solution pH changes.
RESUMEN
Polymers like poly(N-isopropylacrylamide) (PNIPAM) exhibit lower critical solution temperature (LCST) behavior. A variety of reports have shown that brush grafts of PNIPAM on surfaces exhibit similar temperature responsiveness. We recently described an alternative synthetic approach to such surfaces that affords surfaces with similar LCST-like behavior. We also noted how such surfaces' wettability can change in response to the identity and concentration of solutes. Here we show that this synthetic procedure can be extended to glass surfaces and to more complex surfaces present in porous glass frits. Functionalized glass surfaces exhibit solute-dependent wetting behavior analogous to that previously reported. We further show that the resulting responsive nanocomposite grafts on such frits exhibit "smart" responsive permeability with a greater than 1000-fold difference in permeability to water versus aqueous solutions of sodium sulfate. This "smart" permeability is ascribed to the solute-dependent wettability behavior of the responsive PNIPAM component of the nanocomposite graft, which is sensitive both to the identity and concentration of the solute anion and to temperature.
RESUMEN
Phosphines are important as catalysts or reagents in synthesis but must be separated from products after a reaction. This report shows that polyisobutylene (PIB)-bound alkyldiaryl- and triarylphosphines are useful as catalysts in addition and allylic amination reactions or as reagents in aza-Wittig and Mitsunobu reactions. Heptane solutions of such phosphines and their oxidized byproducts can be easily separated from polar solutions of organic products, and PIB-phosphine oxides formed during a reaction can readily be reduced to PIB-phosphines for reuse.
RESUMEN
The preparation of polyethylene-oligomer (PE(olig))-supported N-heterocyclic carbene ligands (NHCs) and their Ru complexes is described. These complexes are structurally analogous to their low molecular weight counterparts and can serve as thermomorphic, recoverable/recyclable ring-closing metathesis (RCM) catalysts. Because of the insolubility of PE(olig)-supported species at 25 °C, such complexes can perform homogeneous RCM reactions at 65 °C and, upon cooling, precipitate as solids. This allows for their quantitative separation from solutions of products.
RESUMEN
The design of functional soluble polyolefins for use as supports for salen ligands and metal complexes is described. Examples and applications that use both polyisobutylene (PIB)- and polyethylene (PE(Olig))-bound recoverable/recyclable salen ligands/metal complexes are detailed. In the case of using PIB as a support, the polymer-bound complexes can be recovered through the use of latent biphasic or a thermomorphic mixed solvent systems. In the case of PE(Olig)-supported complexes, the thermomorphic PE(Olig)-bound salen species can be dissolved in "hot" solvents and quantitatively recovered as solids upon cooling to room temperature. Both the PIB- and PE(Olig)-bound salen catalysts were shown to catalyze the ring-opening of epoxides with various nucleophiles. Both sorts of polyolefin-bound catalysts can be recycled and reused with no observed loss in activity. However, limitations of catalyst concentration make chiral versions of these complexes uncompetitive in comparison to conventional chiral salen catalysts that can be used in neat substrate at higher concentration to produce high enantioselectivity in the ring-opening products. The preparation of a PIB-bound "half-salen" catalyst was also briefly examined.
RESUMEN
Stimuli-responsive surfaces grafted with thermoresponsive polymers switch from hydrophilic to hydrophobic thermally, making these surfaces attractive in applications such as in microfluidics devices, as antifouling surfaces, and in cell culture and tissue engineering. These materials exhibit changes in wettability as the polymer undergoes a phase transition above its lower critical solution temperature (LCST). Because the presence of salts affects LCSTs in accordance to the Hofmeister series, salt effects on the wettability of these thermoresponsive surfaces will dramatically impact device performance. Prior studies of such effects have focused on the influence of anions. Detailed studies of the effects of cations have not been carried out. Here, the influence of varying cation identity in a series of mono-, di-, and trivalent sulfate salts on the wettability of a stimuli-responsive grafted surface was investigated by measuring advancing water contact angle (Theta(a)) changes. The cation-induced changes in Theta(a) were correlated with corresponding changes in surface morphology examined by AFM. The results showed that the effects of varying cations on surface wettability are as large as the effects of varying anion identity and concentration (i.e., Theta(a) changes of up to 90 degrees). Parallel studies of the effects of varying the cation identity and concentration for these same cation sulfate salts in solution show that cation variation also has a large effect on the LCST of PNIPAM, the stimuli responsive polymer component of the nanocomposite grafts that were studied. Moreover, analyses of the Theta(a) and LCST data using activity showed that the Theta(a) or LCST versus cation activity/concentration could be readily grouped by charge. Such differences are not seen in similar studies where anion identity, charge, and concentration are changed.
Asunto(s)
Resinas Acrílicas/química , Cationes , Ensayo de Materiales , Solubilidad , HumectabilidadRESUMEN
The use of polymers as supports for organometallic catalysts has received wide attention. However, catalyst reactivity is sometimes altered as a consequence of catalyst immobilization by a polymeric ligand and such altered reactivity can complicate such supported catalysts' use. The results in this study show that heptane phase selectively soluble polyisobutylene (PIB)-bound phosphine ligands have essentially identical kinetic behavior when compared to electronically similar isobutyldiphenylphosphine analogues in phosphine coordination and exchange in silver(I) halide complexes. These studies used variable-temperature (31)P NMR spectroscopy to probe the silver-phosphine exchange processes for both AgI and AgCl complexes of these polymeric and low molecular weight phosphine ligands. The results show that the dynamic behavior of the PIB- and isobutyldiphenylphosphine-AgX complexes is nearly identical based on line-shape analysis of these (31)P NMR spectra as a function of temperature. Similar studies of more polar poly(ethylene glycol)triarylphosphine-bound AgX complexes and electronically analogous low molecular weight AgX complexes have similar behavior in variable-temperature (31)P NMR spectroscopy.