RESUMEN
Bimaxillary orthognathic surgery is widely used for the correction of dentoskeletal deformities. Surgery sequencing (maxilla or mandible first) remains debated, and guidelines and consensus are lacking. This scoping review summarizes the state of the art and compares the advantages and disadvantages of both approaches. The review was conducted following PRISMA-ScR guidelines. Three electronic databases (PubMed, Scopus, Web of Science) were searched using the PICO protocol and key words in orthognathic surgical sequencing. Four reviewers screened the records independently, and disagreement was resolved by consensus. A total of 23 records met the inclusion criteria. The advantages and disadvantages of the two approaches were compared and assessed for accuracy of reporting. Within the limitations of the present study, available evidence for the intrinsic advantages and the accuracy of the mandible-first sequence supports the choice of this approach in most cases. Nevertheless, each clinical case needs to be evaluated individually, as no dogmatic recommendations can be given for sequencing in bimaxillary orthognathic surgery.
RESUMEN
The aim of this study was to verify treatment accuracy using virtual surgical planning (VSP) with a mandible-first sequence and strict surgical protocol to determine what surgical and methodological factors might influence outcomes. VSP transfer accuracy was evaluated retrospectively through a modified method involving voxel-based superimposition in patients who had undergone bimaxillary surgery with a mandible-first sequence to correct dentoskeletal deformities. Data analysis showed that the movements planned and those executed were substantially equivalent (p < 0.01), with the exception of mandibular and maxillary sagittal movements that were 0.72 ± 0.90 mm and 1.41 ± 1.04 mm smaller, respectively, than planned. This study showed that a mandible-first sequence is accurate for transferring virtual surgical planning intraoperatively. There are several factors involved in the proper transfer of virtual planning beyond the software, such as surgical technique and sequencing. Inaccurate sagittal movements and maxillary repositioning seem to depend mainly on surgical factors.
Asunto(s)
Cirugía Ortognática , Procedimientos Quirúrgicos Ortognáticos , Cirugía Asistida por Computador , Humanos , Estudios Retrospectivos , Procedimientos Quirúrgicos Ortognáticos/métodos , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Cirugía Asistida por Computador/métodos , Imagenología TridimensionalRESUMEN
Bone defects in maxillofacial regions lead to noticeable deformity and dysfunctions. Therefore, the use of biomaterials/scaffolds for maxillofacial bone regrowth has been attracting great interest from many surgical specialties and experts. Many approaches have been devised in order to create an optimal bone scaffold capable of achieving desirable degrees of bone integration and osteogenesis. Osteogenesis represents a complex physiological process involving multiple cooperating systems. A tight relationship between the immune and skeletal systems has lately been established using the concept of "osteoimmunology," since various molecules, particularly those regulating immunological and inflammatory processes, are shared. Inflammatory mediators are now being implicated in bone remodeling, according to new scientific data. In this study, a profiler PCR array was employed to evaluate the expression of cytokines and chemokines in human adipose derived-mesenchymal stem cells (hASCs) cultured on porous hydroxylapatite (HA)/Collagen derived Bio-Oss®/Avitene scaffolds, up to day 21. In hASCs grown on the Bio-Oss®/Avitene biomaterial, 12 differentially expressed genes (DEGs) were found to be up-regulated, together with 12 DEG down-regulated. Chemokine CCL2, which affects bone metabolism, tested down-regulated. Interestingly, the Bio-Oss®/Avitene induced the down-regulation of pro-inflammatory inter-leukin IL-6. In conclusion, our investigation carried out on the Bio-Oss®/Avitene scaffold indicates that it could be successfully employed in maxillofacial surgery. Indeed, this composite material has the advantage of being customized on the basis of the individual patients favoring a novel personalized medicine approach.
RESUMEN
Highly porous Germanium surfaces with uniformly distributed columnar nanovoid structures are fabricated over a large area (wafer scale) by large fluence Sn+irradiation through a thin silicon nitride layer. The latter represents a one-step highly reproducible approach with no material loss to strongly increase photon harvesting into a semiconductor active layer by exploiting the moth-eye antireflection effect. The ion implantation through the nitride cap layer allows fabricating porous nanostructures with high aspect ratio, which can be tailored by varying ion fluence. By comparing the reflectivity of nanoporous Ge films with a flat reference we demonstrate a strong and omnidirectional reduction in the optical reflectivity by a factor of 96% in the selected spectral regions around 960 nm and by a factor of 67.1% averaged over the broad spectral range from 350 to 1800 nm. Such highly anti-reflective nanostructured Ge films prepared over large-areas with a self-organized maskless approach have the potential to impact real world applications aiming at energy harvesting.
RESUMEN
INTRODUCTION: Although it is well known that orthognathic surgery modifies the upper airways, it is still unclear which are the determining factors to achieve adequate and predictable results in all the patients regardless of the initial malocclusion type and satisfying all the traditional orthognathic treatment objectives. This study aimed to correlate airway changes with surgical movements and other variables and the planning modalities to better understand how to control airway dimensions with treatment. METHODS: This study involved 61 patients requiring bimaxillary surgery to correct various dentoskeletal deformities without a history of obstructive sleep apnea syndrome. In all the subjects, the orthosurgical treatment was planned according to the same treatment principles and regardless of the initial airway dimension. The 3-dimensional volume and minimal axial area values generated by cone-beam computed tomography at the preoperative, 3-week, and 1-year postoperative controls were evaluated and correlated with surgical movements and other variables. RESULTS: Although the planning did not consider the initial size of the airways, a significant increase was found for volume and minimal axial area in both the short term (volume, 29.0%; area, 51.2%) and long term (volume, 18.2%; area, 39.8%) with no regard to the type of malocclusion. Only 3 of the variables examined were found to significantly affect the airway: the preoperative dimensions, gender, and the extent of mandibular advancement. These 3 explanatory variables combined can predict the 1-year postoperative volume and minimal area with an accuracy of 71% and 44%, respectively. CONCLUSIONS: According to this study, orthosurgical treatment can protect airways from unexpected unfavorable changes and satisfy the other treatment goals regardless of the initial malocclusion as long as the facial deformities are properly addressed for each patient. Furthermore, these results identified 3 main variables that influence postoperative airways dimensions the most. Keeping in mind that the relationship between airway dimensions and obstructive sleep apnea syndrome is not clearly explained, these considerations may prove to be a useful tool to help in preventing and managing this disease. Studies involving larger samples of patients and evaluating more variables are mandatory to better understand the correlation between airways and sleep function.
Asunto(s)
Maloclusión de Angle Clase III , Cirugía Ortognática , Procedimientos Quirúrgicos Ortognáticos , Apnea Obstructiva del Sueño , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Maloclusión de Angle Clase III/etiología , Maloclusión de Angle Clase III/cirugía , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Procedimientos Quirúrgicos Ortognáticos/métodos , Faringe/diagnóstico por imagen , Faringe/cirugía , Apnea Obstructiva del Sueño/etiología , Apnea Obstructiva del Sueño/cirugíaRESUMEN
BACKGROUND: 3D models are nowadays part of daily clinical practice. Photogrammetry is a brand-new method for transforming small objects into 3D models while keeping their original shape and size. The aim of this study was to evaluate the accuracy, in terms of precision and trueness, of a digital dental model acquired with photogrammetry compared with those obtained using extraoral scanners and intraoral scanners, starting from the same plaster model. METHODS: A plaster model was converted into a digital model using photogrammetry, an extraoral scanner and an intraoral scanner. Different references were measured twice at a distance of 30 min for each model, on the digital models using the software Blender and on the plaster model using a calibre. The Interclass Correlation Coefficient was calculated for each pair of measurements. A volumetric analysis was performed by superimposing the digital models. The coefficient of variation was calculated. A two-way ANOVA test was conducted. RESULTS: For each reference, the coefficient of variation was less than 3%, and the two ANOVA tests resulted in a non-significant value in both cases (p > 0.05). The volumetric analysis demonstrated good agreement between the models derived from the different acquisition methods. CONCLUSIONS: Photogrammetry seems to be a good method for acquiring digital models starting from a plaster model, all the methods tested seem to be good for obtaining an accurate three-dimensional digital model. Other studies are needed to evaluate clinical efficacy.
RESUMEN
(1) Background: The aim of the present study was to compare lower eyelid post-operative complications, such as ectropion, entropion, and scleral show of orbital floor fractures, associated to the subciliary vs transconjunctival approaches. (2) Materials and Methods: A retrospective comparative study of patients who underwent surgery for orbital fractures by means of a transconjunctival or a subciliary approach at the Clinic of Dentistry and Maxillofacial Surgery of the University of Verona from January 2013 through September 2018 was designed. Data related to the trauma and to surgical procedures were retrieved, as well as a series of anthropometric parameters extrapolated from standardized photographs. Statistical analysis was performed on the outcomes. (3) Results: 33 patients underwent surgery by means of a transconjunctival approach and 36 patients by means of a subciliary approach. Ectropion was observed to a greater extent in the subciliary group, however the difference resulted to be not statistically significant. Patients in which osteosynthesis devices were used presented with a greater incidence of scleral show with respect to the remaining patients. No statistically significant difference was observed for any of the parameters taken into account. (4) Conclusions: Since the two approaches does not seem to be associated with remarkable differences in terms of outcomes, the choice of technique should be tailored to the patient's features and the surgeon's experience.