Plant extract-based green fabrication of nickel ferrite (NiFe2O4) nanoparticles: An operative platform for non-enzymatic determination of pentachlorophenol.

Environmental pollution has become a major human concern with the extensive exploitation of pesticides. Pentachlorophenol (PCP) is the most hazardous of all chlorophenols which are being used as pesticide, fungicide, and wood preservative. Thus, the fabrication of ultrasensitive electrochemical methods for the determination of pesticides is of great significance. In the present experiment, a simple, green, and sensitive electrochemical sensor was constructed for the determination of PCP by using a chemically modified nickel ferrite glassy carbon electrode (NiFe2O4/GCE). The fabricated nanoparticles were primarily characterized by several analytical tools to confirm the functionalities, surface texture, crystallinity, and elemental composition. For the investigation of conductive nature, the proposed NiFe2O4/GCE was exploited to the primary electrochemical characterization tools e.g. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The ultra-sensitive determination of PCP was carried out under the linear dynamic range from 0.01 to 90 µM at the pulse amplitude of 80 mV/s in BRB buffer pH of 4. The limit of detection of the developed methods for PCP was calculated to be 0.0016 µM. The analytical applicability of the fabricated sensor was tested in different water samples depicting the acceptable recovery values.

Nonenzymatic Electrochemical Detection of 2,4,6-Trichlorophenol Using CuO/Nafion/GCE: A Practical Sensor for Environmental Toxicants.

2,4,6-Trichlorophenol (2,4,6 TCP) is one of the hazardous toxicants, which has severe impacts on the environment and human health. This study is designed to develop a highly sensitive and selective electrochemical sensor based on CuO nanostructures for the detection of 2,4,6 TCP. The CuO nanostructures were synthesized through an aqueous chemical growth method and characterized by versatile analytical techniques, for example, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, atomic force microscopy, energy-dispersive spectrometry, and X-ray diffraction. The characterization tools revealed a high crystalline nature, exceptional phase purity, nanoball morphology with an average size of around 18.7 nm for the CuO nanostructures. The synthesized material was used to modify a glassy carbon electrode (GCE) with the help of Nafion as a binder to improve its efficiency and sensitivity. The CuO/Nafion/GCE was proven to be a potential sensor for the determination of 2,4,6 TCP under optimized conditions at a scan rate of 70 mV/s, potential range of 0.1-1.0 V, and phosphate buffer of neutral pH as the supporting electrolyte. The linear range for 2,4,6 TCP was set from (1 to 120 µM) with a low limit of detection value calculated to be 0.046 µM. The developed sensor was effectively applied for water samples with acceptable recovery values from 95.9 to 100.6%.