Fabrication of cellulose-collagen based biosorbent as eco-friendly scavengers for uranyl ions.

The aim of the present research is to fabricate a biosorbent using agricultural waste for removal of uranium from contaminated water i.e. "waste to wealth" approach. Cellulose extracted from wheat straw was mercerized and a novel semi-interpenetrating polymer network (semi-IPN) was fabricated through graft copolymerization of polyvinyl alcohol onto hybrid mercerized cellulose + collagen backbone. Response surface methodology was used for optimization of different reaction parameters as a function of % grafting (195.1 %) was carried out. Semi-IPN was found to possess higher thermal stability. Adsorption results revealed that the optimum parameters for the elimination of uranium using semi-IPN were: adsorbent dose = 0.15 g, pH = 6.0, contact time = 120 min and initial U (VI) concentration = 100 µg/L. The pseudo-second-order kinetic model gave the best description of the adsorption equilibrium data as the calculated qe value is nearest to the experimental qe for the different initial U(VI) concentrations. Adsorption experiments followed Langmuir isotherm with R2 = 0.999. Furthermore, recyclability and reusability studies showed that the adsorption efficiency of semi-IPN was 82 % after 5 cycles indicating the superior recycling execution of fabricated biosorbent. Thus, the fabricated ecofriendly device can be used effectively for the removal of uranium from contaminated wastewater sources.

Very high particulate pollution over northwest India captured by a high-density in situ sensor network.

Exposure to particulate matter less than 2.5 µm in diameter (PM2.5) is a cause of concern in cities and major emission regions of northern India. An intensive field campaign involving the states of Punjab, Haryana and Delhi national capital region (NCR) was conducted in 2022 using 29 Compact and Useful PM2.5 Instrument with Gas sensors (CUPI-Gs). Continuous observations show that the PM2.5 in the region increased gradually from < 60 µg m-3 in 6-10 October to up to 500 µg m-3 on 5-9 November, which subsequently decreased to about 100 µg m-3 in 20-30 November. Two distinct plumes of PM2.5 over 500 µg m-3 are tracked from crop residue burning in Punjab to Delhi NCR on 2-3 November and 10-11 November with delays of 1 and 3 days, respectively. Experimental campaign demonstrates the advantages of source region observations to link agricultural waste burning and air pollution at local to regional scales.

Chlorination of secondary treated wastewater with sodium hypochlorite (NaOCl): An effective single alternate to other disinfectants.

The present study provides details about the usefulness of chlorination in the recovery effluents of sewage, and to make it useable for irrigation purposes. Chlorination is one of the effective simplified, and cost-effective traditional methods for disinfection. The study was done for the period of March, 2019 to February, 2020. The disinfection process was optimized by adding sodium hypochlorite to the secondary treated effluents with the help of jar apparatus at a mixing speed of 100 rpm. To optimize the various process variables such as dose, and contact time, several concentrations of NaOCl (0.5, 1, 1.5, 2, 2.5, 3.0) ppm were carefully chosen at different time intervals of 15, 30, and 60 min respectively, which were centered on the foregoing studies. The factors like seasonal variation on MPN index of total coliforms (TCs), CR ∗ T concept, and effect of pH on log elimination of TCs, outcome of pH with rate constant (k), and results of pH against dilution coefficient (n) was also studied. The Chick-Watson, Rennecker-Marinas, Collin-Selleck, and modified Selleck models have shown good reliability to the experimental data of chlorine disinfection to be fit into these kinetic models for the treatment of sewage wastewater. The upgraded CR ∗ T values were attained by using disinfection models. Among these four models, the kinetic modeling by Collin-Selleck, and Selleck-White was investigated as the best modeling to be fitted more finely to the chlorination experimental data to count for the effectiveness of NaOCl. The selected indicator organism in the optimization process of chlorine was Total coliforms (TCs). The residual chlorine and most probable number per log unit (Log) for TCs were measured before the start and after the termination of the disinfection process. The World Health Organization (WHO) standard for pathogenic removal from wastewater, and to irrigate the crops is 3- to 4-log and the chlorine residual under 1 mg/l limit was accomplished.

OsSalT gene cloned from rice provides evidence of its role in salinity and drought stress tolerance.

Abiotic stresses impose a huge threat to agricultural productivity and global food security. To counter this challenge, the precise identification of the right candidate gene (s) for conferring abiotic stress tolerance without compromising the growth and yield is crucial. OsSalT is identified as a salt stress responsive gene located on SalTol QTL of chromosome 1 of rice, however, there is no genetic evidence of its function and probable pathway of its regulation. To get better insights into its functioning, earlier we elucidated the structure of SALT protein at atomic scale {PDB ID (5GVY)} and solution state that provided key clues on the probable mode of its action. Herein, we report the modulation of OsSalT gene in response to various factors and its functional characterization. Results indicate that OsSalT operates through both abscisic acid and gibberellic acid-dependent pathways and is linked to the adaptive stress mechanisms of plants. Its overexpression in a model plant resulted in improved salinity and drought stress tolerance. The OsSalT transformed plants also showed vigorous root growth, early flowering, and better seed germination. The triggering of multiple responses by OsSalT suggested that modulation of such mannose-binding lectin could be a potential game-changer for the improvement of many crops in future.

The role of particulate matter in reduced visibility and anionic composition of winter fog: a case study for Amritsar city.

Severe fog events during winter months in India are a serious concern due to the higher incidence of road accidents, flight delays and increased occurrence of respiratory diseases. The present paper is an attempt to study the twenty fog samples collected from the rooftop of an academic building of Guru Nanak Dev University, Amritsar, India from November 2017 to January 2018. Fog samples were analysed for various parameters viz. pH, electrical conductivity (EC), chloride (Cl-), nitrate (NO3 -) and sulphate (SO4 2-) levels. The pH, EC, and Cl-, NO3 - and SO4 2- levels in the fog samples were estimated as 6.3-7.9, 240-790 µS cm-1, 108-2025 µeq L-1, 105-836 µeq L-1 and 822-5642 µeq L-1, respectively. It was noticed that sulphate was the dominant anion in fog samples. The SO4 2- to NO3 - molar ratio in the fog was estimated as 7.6 which suggests the burning of fossil fuel as the major pollutant from vehicular exhausts. Multiple regression analysis was performed to evaluate the effect of PM2.5/PM10 ratio and relative humidity (RH) on visibility. A box-cox plot of power transformation produced better model fitting, employing a square root transformation of the visibility which indicated that the PM2.5/PM10 and RH have an exponential effect on visibility.

DOE-based synthesis of gellan gum-acrylic acid-based biodegradable hydrogels: screening of significant process variables and in situ field studies.

The current study uses the free radical graft copolymerization of acrylic acid as a monomer, N,N-methylene-bis-(acrylamide) as a crosslinker and ammonium persulfate as an initiator to synthesise GG-cl-poly(AA) hydrogels based on gellan gum utilising response surface methodology (RSM). A full factorial design was used to obtain the greatest percent swelling (P s), and key process variables were determined using the Pareto chart. To make the procedure cost-effective, a multiple regression model employing ANOVA projected a linear model with a maximum percentage swelling of 556 at the lowest concentration of all three studied factors. As a result, the sequential experimental design was successful in obtaining two-fold increases in the percentage swelling in a systematic way. An RSM-based central composite design was used to optimize the percentage swelling of the three most important synthesis parameters: initiator concentration, monomer concentration, and crosslinker concentration. The best process conditions are 7.3 mM L-1 initiator, 44 µM L-1 monomer, and 21.6 mM L-1 crosslinker. The effective synthesis of GG-cl-poly(AA) was validated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, field emission scanning electron microscopy (FE-SEM), and 1H-nuclear magnetic resonance. The swelling behavior of GG-cl-poly(AA) in water and saline solutions, as well as its water retention capability, was investigated. In comparison to distilled water, the swelling potential of optimized hydrogel was shown to be significantly reduced in saline solutions. The addition of GG-cl-poly(AA) significantly improved the moisture properties of plant growth media (clay, sandy, and clay-soil combination), implying that it has great potential in moisture stress agriculture. GG-cl-poly(AA) biodegradation was studied by soil burial and vermicomposting methods. The composting approach showed 89.95% deterioration after 22 days, while the soil burial method showed 86.71% degradation after 22 days. The synthesized hydrogel may be beneficial for agricultural applications because of its considerable degradation behaviour, strong water retention capacity, low cost, and environmental friendliness.

Optimization of extraction conditions of Angelica archangelica extract and activity evaluation in experimental fibromyalgia.

The plant Angelica archangelica, owing to its magnificent therapeutic effectiveness in folklore medicine system, has been regarded as an "angel plant." The current investigation was aimed to optimize extraction conditions of A. archangelica roots and to investigate in vivo role of optimized extract in fibromyalgia. Plant material (dried roots) was subjected to methanol extraction at variable temperature (40 to 60 °C) and time (12 to 36 hr) conditions as per two-factorial design strategy, and responses in terms of antioxidant activity were determined. The optimized extraction conditions were found to be temperature of 60 °C and time of 36 hr. HPLC fingerprinting indicated the presence of coumarins in extract. To induce fibromyalgia, the mice were administered reserpine at a dose of 0.5 mg/kg. Mice were orally treated with 100, 200, and 400 mg/kg extract, and magnitude of fibromyalgia was quantified. In comparison to reserpine group, the extract treatment attenuated pain as shown by significant increase in paw withdrawal threshold against mechanical stimuli (P < 0.05), improved motor ability indicated by increase in fall-off time in inclined plane test (P < 0.05), improved locomotion indicated by increased square crossings in open field test (P < 0.05), and improved cognition as shown by significant reduction in time to reach platform in Morris water maze test and passive avoidance task test (P < 0.05). Extract treatment significantly halted reserpine-induced rise in serum cytokine level (P < 0.05) and brain oxidative stress (P < 0.05). Angelica archangelica extract exerted its beneficial effects in fibromyalgia possibly through the attenuation of oxidative stress-mediated inflammatory cascade. PRACTICAL APPLICATION: Leads from natural products have become an integral part of drug designing processes and have high acceptability due to their better tolerance. The optimization of extraction conditions of plant yields better results and could reduce the processing time, thus increasing its industrial value.

Real-time monitoring of air pollutants in seven cities of North India during crop residue burning and their relationship with meteorology and transboundary movement of air.

Air pollutants emissions due to the burning of crop residues could adversely affect human health, environment, and climate. Hence, a multicity campaign was conducted during crop residue burning period in Indo Gangetic Plains (IGP) to study the impact on ambient air quality. Seventeen air pollutants along with five meteorological parameters, were measured using state of the art continuous air quality monitors. The average concentration of PM10, PM2.5, and PM1 during the whole campaign were 196.7±30.6, 148.2±20, and 51.2±8.9 µgm-3 and daily average concentration were found several times higher than national ambient air quality standards for 24h. Amritsar had the highest average concentration of PM2.5 (178.4±83.8 µgm-3) followed by Rohtak and Sonipat (158.4±79.8, 156.5±105.3µgm-3), whereas Chandigarh recorded the lowest concentration (112.3±6.9µgm-3). The concentration of gaseous pollutants NO, NO2, NOx, and SO2 were also observed highest at Amritsar location, i.e., 6.6±2.6ppb, 6.2±0.7ppb, 12.7±3.0ppb, and 7.5±3.3ppb respectively. The highest average O3 and CO were 22.5±19.3ppb and 1.5±1.2ppm during the campaign. The level of gaseous pollutants and Volatile organic compounds (VOCs) found to be elevated during the campaign, which can play an important role in the formation of secondary air pollutants. The correlation of meteorology and air pollutants was also studied, and O3 shows a significant relation with temperature and UV (R=0.87 and 0.74) whereas VOCs shows a significant correlation with temperature (R=-0.21 to -0.47). Air quality data was also analyzed to identify sources of emissions using principal component analysis, and it identifies biomass burning and vehicular activities as major sources of air pollution.

Ameliorative effect of imperatorin in chemically induced fibromyalgia: Role of NMDA/NFkB mediated downstream signaling.

Fibromyalgia (FM) is a chronic pain syndrome involving complex interplay of biogenic amines and NMDA receptor mediated hypersensitization of nociceptive pathways. Clinical management of FM is poorly addressed with only a few available therapeutic options. Coumarins are active phenolic molecules of natural origin found to have broad pharmacological activities. Current investigation explores the role of naturally occurring coumarin, imperatorin in mouse model of fibromyalgia. Administration of reserpine (0.5 mg/kg, s.c.) thrice at 24 h intervals induced behavioral and neurochemical alterations characteristic of fibromyalgia. Reserpine was found to induce allodynia quantified using electronic von Frey (e-VF) and pressure application measurement (PAM) test, depression as indicated by an increased duration of immobility in forced swim test (FST), decreased motor coordination and locomotor activity in inclined plane test (IPT) and open field test (OFT) respectively. Cognitive deficits were evident by an increased latency to locate hidden platform in Morris water maze (MWM) and passive avoidance test (PAT). Reserpine treatment was found to cause an increased anxiety as revealed by increased time spent in closed arm of the elevated plus maze (EPM). Furthermore, an up- regulation in NMDA and NFκB expression in the brain and spinal cord was observed in reserpine treated groups. Administration of imperatorin (10 mg/kg, i.p) for a period of 5 days ameliorated all behavioral deficits, biochemical changes and decreased expression of NMDA and NFκB in the brain and spinal cord of treated mice. These findings indicate an interplay of NMDA/NFκB modulation by imperatorin in the reserpine induced fibromyalgia in mice.

Bergapten inhibits chemically induced nociceptive behavior and inflammation in mice by decreasing the expression of spinal PARP, iNOS, COX-2 and inflammatory cytokines.

In continuation with our previous studies on osthole, bergapten, a closely related furanocoumarin was investigated for its ameliorative effect on chemically induced neurogenic and inflammatory hyperalgesia and inflammation in mice. Chemical hyperalgesia and inflammation was induced by administration of formalin (intraplantar), acetic acid (intraperitoneal) and carrageenan (intraplantar) to different groups of animals. Pain responses were quantified and median effective dose (ED50) of bergapten was calculated. Lipopolysaccharide challenge was administered to study inflammatory cytokines which were analyzed in plasma using ELISA. The expression of poly ADP-ribose polymerase (PARP), cyclooxygenase (COX-2) and inducible nitric oxide synthase (iNOS) was quantified by immnofluorescence staining. Bergapten was found to ameliorate both neurogenic and inflammatory hyperalgesia precipitated by formalin, acetic acid induced writhing and carrageenan induced paw inflammation with ED50 dose of 2.96 mg/kg. Bergapten also significantly decreased the levels of TNF-α and IL-6 and the expression of PARP, COX-2 and iNOS in the spine. It is concluded that bergapten is an interesting molecule with significant analgesic and anti-inflammatory activity emanating through the modulation of multiple pain mediating pathways.

Possible Molecular Mediators Involved and Mechanistic Insight into Fibromyalgia and Associated Co-morbidities.

Fibromyalgia is a chronic complex syndrome of non-articulate origin characterized by musculoskeletal pain, painful tender points, sleep problems and co-morbidities including depression, migraine. The etiopathogenesis of fibromyalgia is complex, variable and remains inconclusive. The etiological factors that have been defined include stress, genetic predisposition and environmental components. As per the reports of the American College of Rheumatology (ACR) the prevalence of fibromyalgia varies from 2 to 22% among the general population with poor diagnostic features primarily pain. Fibromyalgia encompasses a spectrum of co-morbid conditions with multifarious pathogenesis. The highly prevalent manifestations of fibromyalgia include heterogeneous pain and aches. Biochemical and neurobiological elements of fibromyalgia include neurotransmitters, hypothalamic pituitary adrenal axis (HPA axis), inflammatory cytokines, monoaminergic pathway, opioid peptides, sex hormones, nerve growth factor (NGF) and local free radical insult. An imbalance in the serotonergic system is the major underlying etiological factor that has been explored most widely. Owing to complex interplay of diverse pathophysiological pathways, overlapping co-morbidities such as depression have been clinically observed. Therapeutic management of fibromyalgia involves both non pharmacological and pharmacological measures. The current review presents various dysregulations and their association with symptoms of fibromyalgia along with their underlying neurobiological aspects.

Tailoring the Substitution Pattern on 1,3,5-Triazine for Targeting Cyclooxygenase-2: Discovery and Structure-Activity Relationship of Triazine-4-Aminophenylmorpholin-3-one Hybrids that Reverse Algesia and Inflammation in Swiss Albino Mice.

Here, we report analgesic and anti-inflammatory activity of a series of compounds obtained by appending 4-aminophenylmorpholin-3-one and acyclic, cyclic, or heterocyclic moieties on 1,3,5-triazine. The structures of compounds 4b and 6b are optimized for the best inhibition of COX-2 with IC50 values of 0.06 and 0.08 µM, respectively, and selectivity over COX-1 of 166 and >125, respectively. At the dose of 5 mg kg-1, these compounds significantly reduced acetic acid induced writhings, and their ED50 values were found to be 2.2 and 1.9 mg kg-1, respectively. Besides the cell-based and animal-based experiments showing the modes of action of these compounds targeting COX-2, the interaction behavior of 4b with COX-2 was also characterized, with physicochemical experiments including ITC, NMR, UV-vis, and molecular-modeling studies. Characteristically, these compounds interact with R120, Y355, and W385, the residues responsible for holding the substrate and mediating the process of electron transfer during the metabolic phase of the enzyme.

Recycling of Waste Poly(ethylene terephthalate) Bottles by Alkaline Hydrolysis and Recovery of Pure Nanospindle-Shaped Terephthalic Acid.

Poly(ethylene terephthalate) (PET) is a versatile engineering plastic which exhibits exceptional mechanical and thermal properties. Huge amounts of PET are consumed in various industries such as food packaging industry, textile industry, in the manufacturing of audio, video tapes and X-ray films and so on. But due to its substantial fraction by volume in water bodies and its high persistence to the atmospheric and biological agents, it could be considered as a hazard substance. Thereby chemical recycling of PET serves as a solution to solid waste problem as it transforms PET into its monomers via hydrolysis. Chemical recycling of post consumed waste PET bottles via alkaline hydrolysis is the main aim of this paper. Operating parameters such as reaction time and temperature were optimized for the conversion of PET into nanospindle-shaped terephthalic acid (TPA). Depolymerization of PET was carried out via alkaline hydrolysis by varying reaction time and temperature and maximum yield of 92% was obtained at 200 °C with reaction time of 25 minutes. The formed TPA nanospindles were further characterized in detail which exhibited high crystallinity, purity and fascinating thermal and surface properties.

Profiling and production of hemicellulases by thermophilic fungus Malbranchea flava and the role of xylanases in improved bioconversion of pretreated lignocellulosics to ethanol.

This study reports thermophilic fungus Malbranchea flava as a potent source of xylanase and xylan-debranching accessory enzymes. M. flava produced high levels of xylanase on sorghum straw containing solidified culture medium. The optimization of culture conditions for production of hemicellulases was carried out using one factor at a time approach and Box-Behnken design of experiments with casein (%), inoculum age (h) and inoculum level (ml) as process variables and xylanase, ß-xylosidase, acetyl esterases and arabinofuranosidase as response variables. The results showed that casein concentration between 3.0 and 3.5 %, inoculum age (56-60 h) and inoculum level (2-2.5 ml) resulted in production of 16,978, 10.0, 67.7 and 3.8 (U/gds) of xylanase, ß-xylosidase, acetyl esterase and α-L-arabinofuranosidase, respectively. Under optimized conditions M. flava produced eight functionally diverse xylanases with distinct substrate specificity against different xylan types. The peptide mass fingerprinting of 2-D gel electrophoresis resolved proteins indicated to the presence of cellobiose dehydrogenase and glycosyl hydrolases suggesting the potential of this strain in oxidative and classical cellulase-mediated hydrolysis of lignocellulosics. Addition of xylanase (300 U/g substrate) during saccharification (at 15 % substrate loading) of different pretreated (acid/alkali) substrates (cotton stalks, wheat straw, rice straw, carrot grass) by commercial cellulase (NS28066) resulted in 9-36 % increase in saccharification and subsequent fermentation to ethanol when compared to experiment with commercial enzyme only. High ethanol level 46 (g/l) was achieved with acid pretreated cotton stalk when M. flava xylanase was supplemented as compared to 39 (g/l) with xylanase without xylanase addition.

Self-assembled nanoparticles as multifunctional drugs for anti-microbial therapies.

A self-assembled nanoparticle containing a photosensitizer and a Trojan-horse moiety (cholesterol), binds an anti-TB pro-drug and increases 1000-fold its activity against mycobacteria. These minimalist constructs will allow development of economically viable, efficient drug preparations for the treatment of drug-resistant TB infections.

Experimental design optimization for electrochemical removal of gentamicin: toxicity evaluation and degradation pathway.

Electrochemical degradation of gentamicin was achieved using a laboratory scale electrochemical reactor by optimizing pH, current density and treatment time. A two step statistical optimization was performed as per factorial design and center composite design (CCD). A Pareto chart was used for selecting statistically significant effects and an analysis of variance (ANOVA) table indicated significant curvature. Thus adding additional experimental runs improved the model fitting through a second order model. Maximum degradation was predicted at a pH of 6.7, 70 A m(-2) and 45 min. The experimental data fitted well through a reduced quadratic model with R(2) equal to 0.945. The toxicity of degradation products as determined by disc diffusion assay employing Pseudomonas aeruginosa strain was found to be reduced by 55%. The degradation pathway of gentamicin was studied using mass spectral (MS) analysis. Pure gentamicin showed a molecular ion peak at m/z 478 ([M + 1](+)), and after addition of NaCl as electrolyte, the mass peak was observed at m/z 523. After 15 min of electrochemical treatment, a new peak appeared at m/z 316 due to the loss of one pyran moiety. After 45 min of electrochemical treatment, another peak appeared at m/z of 478 due to loss of two Na(+) from gentamicin.

Electrocoagulation removal of Cr(VI) from simulated wastewater using response surface methodology.

The present study envisages the performance of a laboratory scale electrocoagulation system for the removal of Cr(VI) from 100 mg l(-1) solution using Al-Al electrodes with an effective surface area of 100 cm(2), and placed 15 mm apart. The interaction between voltage x time, and amperage x time best explained the Cr(VI) reduction efficiency with the coefficient of determination (R(2)) being 0.8873 and 0.9270 respectively. Similarly, the square root of energy consumption in Cr(VI) reduction had a linear correlation with voltage x time (R(2)=0.8949), whereas, amperage x time better explained energy consumption (R(2)=0.9400). Response surface methodology was used for the optimization of process variables (pH, voltage and treatment time), response modeling and predictions. Maximum Cr(VI) reduction efficiency of 90.4% was achieved at pH 5, 24 V and 24 min treatment time, and the treatment consumed 137.2 KWh m(-3) of electrical energy. Multiple response optimization for maximizing Cr(VI) reduction efficiency and minimizing energy consumption showed 49.6% Cr(VI) removal at pH 5, 12.8 V and 24 min treatment time. The response models developed explained 95.2% variability for Cr(VI) reduction efficiency and 99.4% variability for energy consumption. Results of the prediction models were validated through laboratory scale batch experiments.

Targeted photodynamic therapy with multiply-loaded recombinant antibody fragments.

Current photodynamic therapy (PDT) of cancer is limited by inefficiencies involved in specifically targeting photosensitizers to tumors. Although antibodies are being explored as targeting vehicles, they present significant challenges, particularly in terms of pharmacokinetics and drug-coupling. We describe here a novel and effective system to covalently attach multiple photosensitizer molecules (both preclinical, pyropheophorbide-a and clinically approved, verteporfin photosensitizers) to single-chain Fvs. Further, we demonstrate that not only do the resulting photoimmunoconjugates retain photophysical functionality, they are more potent than either free photosensitizer, effectively killing tumor cells in vitro and in vivo. For example, treatment of human breast cancer xenografts with a photoimmunoconjugate comprising an anti-HER-2 scFv linked to 8-10 molecules of pyropheophorbide-a leads to significant tumor regression. These results give an insight into the important features that make scFvs good carriers for PDT drugs and provide proof of concept of our unique approach to targeted photodynamic therapy (tPDT). This promises to significantly improve on current photodynamic therapies for the treatment of cancer.

Fluorescence characterisation of multiply-loaded anti-HER2 single chain Fv-photosensitizer conjugates suitable for photodynamic therapy.

We report the synthesis, spectroscopic properties and intracellular imaging of recombinant antibody single chain fragment (scFv) conjugates with photosensitizers used for photodynamic therapy of cancer (PDT). Two widely-studied photosensitizers have been selected: preclinical pyropheophorbide-a (PPa) and verteporfin (VP), which has been clinically approved for the treatment of acute macular degeneration (Visudyne). Pyropheophorbide-a and verteporfin have been conjugated to an anti-HER2 scFv containing on average ten photosensitizer molecules per scFv with a small contribution (

Exposure of Porphyromonas gingivalis to red light in the presence of the light-activated antimicrobial agent toluidine blue decreases membrane fluidity.

Porphyromonas gingivalis, one of the etiological agents of periodontitis, can be killed by red light in the presence of toluidine blue. The purpose of this study was to determine whether this light-induced killing was accompanied by changes in the fluidity of the organism's cytoplasmic membrane. A suspension of the organism was exposed to red light in the presence of toluidine blue, and the membrane fluidity was monitored spectrofluorimetrically by using the membrane probe trimethylammonium diphenyl hexatriene. The fluidity of the organism's cytoplasmic membrane was found to decrease significantly during lethal photosensitization, and this was accompanied by membrane condensation and vacuolation of the cells. Although changes in membrane fluidity are often attributable to lipid peroxidation, malonaldehyde (a product of lipid peroxidation) was not detectable. The disruption of membrane functions associated with a decreased membrane fluidity may contribute to the bactericidal effect of light-activated toluidine blue.