Bio-catalytic nanoparticle shaping for preparing mesoscopic assemblies of semiconductor quantum dots and organic molecules.

We report a unique bio-catalytic nanoparticle shaping (BNS) method for preparing a variety of mesoscopic particles by a facile process. For example, the BNS method affords mesoscopic QD assembly dispersions. Large-size sedimentations (>1 µm) of QDs are first formed using oligo-L-lysine linkers. These then undergo controlled enzymatic cleavage of the linkers using trypsin, which surprisingly leads to mesoscopic particles about 84 nm in size with a narrow size distribution. A detailed mechanism of the BNS method is investigated using tetrakis(4-carboxyphenyl)porphyrin (TCPP), instead of QDs, as a probe molecule. Interestingly, the BNS method can also be applied to other combinations of enzymes and enzymatically degradable linkers, such as hyaluronidase with hyaluronan. As a potential application, the mesoscopic particles of QDs and oligo-lysine exhibit their ability to act as a drug delivery carrier originating from the features of both QDs and oligo-lysine. The BNS method demonstrates the universality and versatility of preparing mesoscopic particles and opens new doors for studying QD assemblies and molecular-based mesoscopic particles.

Photosensitizer-singlet oxygen sensor conjugated silica nanoparticles for photodynamic therapy and bioimaging.

Intracellular singlet oxygen (1O2) generation and detection help optimize the outcome of photodynamic therapy (PDT). Theranostics programmed for on-demand phototriggered 1O2 release and bioimaging have great potential to transform PDT. We demonstrate an ultrasensitive fluorescence turn-on sensor-sensitizer-RGD peptide-silica nanoarchitecture and its 1O2 generation-releasing-storing-sensing properties at the single-particle level or in living cells. The sensor and sensitizer in the nanoarchitecture are an aminomethyl anthracene (AMA)-coumarin dyad and a porphyrin or CdSe/ZnS quantum dots (QDs), respectively. The AMA in the dyad quantitatively quenches the fluorescence of coumarin by intramolecular electron transfer, the porphyrin or QD moiety generates 1O2, and the RGD peptide facilitates intracellular delivery. The small size, below 200 nm, as verified by scanning electron microscopy and differential light scattering measurements, of the architecture within the 1O2 diffusion length enables fast and efficient intracellular fluorescence switching by the tandem ultraviolet (UV)-visible or visible-near-infrared (NIR) photo-triggering. While the red emission and 1O2 generation by the porphyrin are continually turned on, the blue emission of coumarin is uncaged into 230-fold intensity enhancement by on-demand photo-triggering. The 1O2 production and release by the nanoarchitecture enable spectro-temporally controlled cell imaging and apoptotic cell death; the latter is verified from cytotoxic data under dark and phototriggering conditions. Furthermore, the bioimaging potential of the TCPP-based nanoarchitecture is examined in vivo in B6 mice.

Dual-color photoluminescence modulation of zero-dimensional hybrid copper halide microcrystals.

Zero-dimensional hybrid copper(I) halides (HCHs) are attractive due to their interesting photoluminescence (PL) properties and the high abundance and low toxicity of copper. In this study, we report green-red dual emission from rhombic 1-butyl-1-methyl piperidinium copper bromide [(Bmpip)2Cu2Br4] microcrystals (MCs) prepared on borosilicate glass. The structure and elemental composition of the MCs are characterized by single crystal X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Interestingly, MCs prepared on an ITO-coated glass plate show an intense green emission compared to the dual emission on a bare glass or plastic substrate. Furthermore, the intensity of the green emission from the MC is enormously increased by powdering using a conductive material, suggesting the deactivation of the red-emitting state by a charge transfer interaction with the conductor. These findings open a new strategy to suppress the self-trapping of excitons by longitudinal optical phonons and control the dual emitting states in HCHs.

Self-assembled halide perovskite quantum dots in polymer thin films showing temperature-controlled exciton recombination.

Rationally assembled supramolecular structures of organic chromophores or semiconductor nanomaterials show excitonic properties different from individual molecules or nanoparticles. We report polymer-assisted assembly formation and thermal modulation of excitonic recombination in self-assembled formamidinium lead bromide perovskite quantum dots.

Highly Luminescent and Stable Halide Perovskite Nanocrystals by Interfacial Defect Passivation and Amphiphilic Ligand Capping.

Halide vacancies cause lattice degradation and nonradiative losses in halide perovskites. In this study, we strategically fill bromide vacancies in CsPbBr3 perovskite nanocrystals with NaBr, KBr, or CsBr at the organic-aqueous interface for hydrophobic ligand-capped nanocrystals or in a polar solvent (2-propanol) for amphiphilic ligand-capped nanocrystals. Energy-dispersive X-ray spectra, powder X-ray diffraction data, and scanning transmission electron microscopy images help us confirm vacancy filling and the structures of samples. The bromide salts increase the photoluminescence quantum yield (98 ± 2%) of CsPbBr3 by decreasing the nonradiative decay rate. Single-particle studies show the quantum yield increase originates from the poorly luminescent nanocrystals becoming highly luminescent after filling vacancies. Furthermore, we tune the optical band gap (ultraviolet-visible-near-infrared) of the hydrophobic ligand-capped nanocrystals by halide exchange at the toluene-water interface using saturated NaCl or NaI solutions, which completes in about 60 min under continuous mixing. In contrast, the amphiphilic ligand accelerates the halide exchange in 2-propanol, suggesting ambipolar functional groups speed up the ion-exchange reaction. The bromide vacancy-filled or halide-exchanged samples in a toluene-water biphasic solvent show higher stability than amphiphilic ligand-capped samples in 2-propanol. This strategy of defect passivation, ion exchange, and ligand chemistry to improve quantum yields and tune band gaps of halide perovskite nanocrystals can be promising for designing stable and water-soluble perovskite samples for solar cells, light-emitting diodes, photodetectors, and photocatalysts.

Thermodynamically and Kinetically Controlled Nucleation and Growth of Halide Perovskite Single Crystals.

Halide perovskites are ideal for next-generation optical devices and photovoltaics. Although perovskite single-crystals show reproducible optoelectronic properties, significant variations in the crystal size, anisotropy, density, defects, photoluminescence (PL), and carrier lifetime affect the sample properties and device performances. Homogenous size and shape FA/MAPbBr3 single microcrystals (MCs) with controlled edge lengths, crystal densities, PL lifetimes, and PL intensities are prepared by thermodynamically controlling and kinetically separating the crystal nucleation-growth processes using optimum N-cyclohexyl-2-pyrrolidone (CHP) concentration. The crystal growth kinetics at different CHP concentrations and temperatures are estimated spectroscopically by measuring the concentration of Pb (II). High-density cubic MCs with a homogenous size distribution, high PL intensities, and long PL lifetimes are obtained within minutes at high temperatures by the controlled addition of the pyrrolidone derivative. Conversely, the crystal size nonlinearly increases with time at low temperatures. The isotropically grown high-density single crystals at controlled nucleation-growth rates at 190 °C with 20% CHP show the highest PL intensity and the longest PL lifetimes. This method offers thermodynamic and kinetic control of perovskite single-crystal growth with shape control.

Slipping-Free Halide Perovskite Supercrystals from Supramolecularly-Assembled Nanocrystals.

Supramolecularly assembled high-order supercrystals (SCs) help control the dielectric, electronic, and excitonic properties of semiconductor nanocrystals (NCs) and quantum dots (QDs). Ligand-engineered perovskite NCs (PNCs) assemble into SCs showing shorter excitonic lifetimes than strongly dielectric PNC films showing long photoluminescence (PL) lifetimes and long-range carrier diffusion. Monodentate to bidentate ligand exchange on ≈ 8 nm halide perovskite (APbX3 ; A:Cs/MA, X:Br/I) PNCs generates mechanically stable SCs with close-packed lattices, overlapping electronic wave functions, and higher dielectric constant, providing distinct excitonic properties from single PNCs or PNC films. From Fast Fourier Transform (FFT) images, time-resolved PL, and small-angle X-ray scattering, structurally and excitonically ordered large SCs are identified. An Sc shows a smaller spectral shift (<35 meV) than a PNC film (>100 meV), a microcrystal (>100 meV), or a bulk crystal (>100 meV). Also, the exciton lifetime (<10 ns) of an SC is excitation power-independent in the single exciton regime 〈N〉<1, comparable to an isolated PNC. Therefore, bidentate-ligand-assisted SCs help overcome delayed exciton or carrier recombination in halide perovskite nanocrystal assemblies or films.

Photoinduced interfacial electron transfer from perovskite quantum dots to molecular acceptors for solar cells.

Bandgap-engineered inorganic and hybrid halide perovskite (HP) films, nanocrystals, and quantum dots (PQDs) are promising for solar cells. Fluctuations of photoinduced electron transfer (PET) rates affect the interfacial charge separation efficiencies of such solar cells. Electron donor- or acceptor-doped perovskite samples help analyze PET and harvest photogenerated charge carriers efficiently. Therefore, PET in perovskite-based donor-acceptor (D-A) systems has received considerable attention. We analyzed the fluctuations of interfacial PET from MAPbBr3 or CsPbBr3 PQDs to classical electron acceptors such as 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 1,2,4,5-tetracyanobenzene (TCNB) at single-particle and ensemble levels. The significantly negative Gibbs free energy changes of PET estimated from the donor-acceptor redox potentials, the donor-acceptor sizes, and the solvent dielectric properties help us clarify the PET in the above D-A systems. The dynamic nature of PET is apparent from the decrease in photoluminescence (PL) lifetimes and PL photocounts of PQDs with an increase in the acceptor concentrations. Also, the acceptor radical anion spectrum helps us characterize the charge-separated states. Furthermore, the PL blinking time and PET rate fluctuations (108 to 107 s-1) provide us with single-molecule level information about interfacial PET in perovskites.

Luminescent quantum dots: Synthesis, optical properties, bioimaging and toxicity.

Luminescent nanomaterials such as semiconductor nanocrystals (NCs) and quantum dots (QDs) attract much attention to optical detectors, LEDs, photovoltaics, displays, biosensing, and bioimaging. These materials include metal chalcogenide QDs and metal halide perovskite NCs. Since the introduction of cadmium chalcogenide QDs to biolabeling and bioimaging, various metal nanoparticles (NPs), atomically precise metal nanoclusters, carbon QDs, graphene QDs, silicon QDs, and other chalcogenide QDs have been infiltrating the nano-bio interface as imaging and therapeutic agents. Nanobioconjugates prepared from luminescent QDs form a new class of imaging probes for cellular and in vivo imaging with single-molecule, super-resolution, and 3D resolutions. Surface modified and bioconjugated core-only and core-shell QDs of metal chalcogenides (MX; M = Cd/Pb/Hg/Ag, and X = S/Se/Te,), binary metal chalcogenides (MInX2; M = Cu/Ag, and X = S/Se/Te), indium compounds (InAs and InP), metal NPs (Ag, Au, and Pt), pure or mixed precision nanoclusters (Ag, Au, Pt), carbon nanomaterials (graphene QDs, graphene nanosheets, carbon NPs, and nanodiamond), silica NPs, silicon QDs, etc. have become prevalent in biosensing, bioimaging, and phototherapy. While heavy metal-based QDs are limited to in vitro bioanalysis or clinical testing due to their potential metal ion-induced toxicity, carbon (nanodiamond and graphene) and silicon QDs, gold and silica nanoparticles, and metal nanoclusters continue their in vivo voyage towards clinical imaging and therapeutic applications. This review summarizes the synthesis, chemical modifications, optical properties, and bioimaging applications of semiconductor QDs with particular references to metal chalcogenide QDs and bimetallic chalcogenide QDs. Also, this review highlights the toxicity and pharmacokinetics of QD bioconjugates.

Nanomaterials for Fluorescence and Multimodal Bioimaging.

Bioconjugated nanomaterials replace molecular probes in bioanalysis and bioimaging in vitro and in vivo. Nanoparticles of silica, metals, semiconductors, polymers, and supramolecular systems, conjugated with contrast agents and drugs for image-guided (MRI, fluorescence, PET, Raman, SPECT, photodynamic, photothermal, and photoacoustic) therapy infiltrate into preclinical and clinical settings. Small bioactive molecules like peptides, proteins, or DNA conjugated to the surfaces of drugs or probes help us to interface them with cells and tissues. Nevertheless, the toxicity and pharmacokinetics of nanodrugs, nanoprobes, and their components become the clinical barriers, underscoring the significance of developing biocompatible next-generation drugs and contrast agents. This account provides state-of-the-art advancements in the preparation and biological applications of bioconjugated nanomaterials and their molecular, cell, and in vivo applications. It focuses on the preparation, bioimaging, and bioanalytical applications of monomodal and multimodal nanoprobes composed of quantum dots, quantum clusters, iron oxide nanoparticles, and a few rare earth metal ion complexes.

Hybridization of Co3S4 and Graphitic Carbon Nitride Nanosheets for High-performance Nonenzymatic Sensing of H2O2.

The development of efficient H2O2 sensors is crucial because of their multiple functions inside and outside the biological system and the adverse effects that a higher concentration can cause. This work reports a highly sensitive and selective non-enzymatic electrochemical H2O2 sensor achieved through the hybridization of Co3S4 and graphitic carbon nitride nanosheets (GCNNS). The Co3S4 is synthesized via a hydrothermal method, and the bulk g-C3N4 (b-GCN) is prepared by the thermal polycondensation of melamine. The as-prepared b-GCN is exfoliated into nanosheets using solvent exfoliation, and the composite with Co3S4 is formed during nanosheet formation. Compared to the performances of pure components, the hybrid structure demonstrates excellent electroreduction towards H2O2. We investigate the H2O2-sensing performance of the composite by cyclic voltammetry, differential pulse voltammetry, and amperometry. As an amperometric sensor, the Co3S4/GCNNS exhibits high sensitivity over a broad linear range from 10 nM to 1.5 mM H2O2 with a high detection limit of 70 nM and fast response of 3 s. The excellent electrocatalytic properties of the composite strengthen its potential application as a sensor to monitor H2O2 in real samples. The remarkable enhancement of the electrocatalytic activity of the composite for H2O2 reduction is attributed to the synergistic effect between Co3S4 and GCNNS.

Halide Perovskite Single Crystals and Nanocrystal Films as Electron Donor-Acceptor Heterojunctions.

Halide perovskites are materials for future optical displays and solar cells. Electron donor-acceptor perovskite heterostructures with distinguishing halide compositions are promising for transporting and harvesting photogenerated charge carriers. Combined e-beam lithography and anion exchange are promising to develop such heterostructures but challenging to prepare multiple heterojunctions at desired locations in single crystals. We demonstrate swift laser trapping-assisted band gap engineering at the desired locations in MAPbBr3 microrods, microplates, or nanocrystal thin films. The built-in donor-acceptor double and multi-heterojunction structures let us transport and trap photogenerated charge carriers from wide-band gap bromide to narrow-band gap iodide domains. We discuss the charge carrier transport and trapping mechanisms from the viewpoints of engineered bands and band continuity. This work offers a convenient method for designing single-, double- and multi-heterojunction donor-acceptor halide perovskites for photovoltaic, photonic, and electronic applications.

Excitation-Wavelength-Dependent Functionalities of Temporally Controlled Sensing and Generation of Singlet Oxygen by a Photoexcited State Engineered Rhodamine 6G-Anthracene Conjugate.

The present study provides design guidance for unique multipotent molecules that sense and generate singlet oxygen (1 O2 ). A rhodamine 6G-aminomethylanthracene-linked donor-acceptor molecule (RA) is designed and synthesized for demonstrating wavelength-dependent functionalities as follows; (i) RA acts as a conventional fluorogenic 1 O2 sensor molecule like the commercially available reagent, singlet oxygen sensor green (SOSG), when it absorbs ultraviolet (UV)-visible light and reacts with 1 O2 . (ii) RA acts as a temporally controlled 1 O2 sensing reagent under the longer wavelength (∼700 nm) photosensitization. RA enters an intermediate state after capturing 1 O2 and does not become strongly fluorescent until it is exposed to UV, blue, or green light. (iii) RA acts as an efficient photosensitizer to generate 1 O2 under green light illumination. The spin-orbit charge transfer mediated intersystem crossing (SOCT-ISC) process achieves this function, and RA shows a potential cancer-killing effect on pancreatic cancer cells. The wavelength-switchable functionalities in RA offer to promise molecular tools to apply 1 O2 in a spatiotemporal manner.

Inorganic Chain Mediated Excitonic Properties in One-Dimensional Lead Halide Hybrid Perovskites.

Semiconductors that emit intrinsic white light are considered next-generation lighting sources. Herein, the broadband emission of one-dimensional (1D) lead halide perovskites, TMAPbBr3-xIx (x = 0, 1, 1.5, 2, 3; TMA+ = tetramethylammonium), is systematically investigated. Lattice distortion causes the conversion of dark excitons to bright self-trapped excitons. Owing to its strongly localized exciton recombination and high absorption probability, TMAPbBr3 is the most viable in this family. A delocalized hole increases the nonradiative recombination rate of excitons in TMAPbBr3-xIx alloys. In 1D TMAPbBr3-xIx perovskites, the vibration mode of the Pb-X bond stretching of the PbX6 octahedra contributes more to the effect on exciton-phonon coupling than the mode of the X-Pb-X angle bending. Pb-X bond stretching and spontaneous polarization can tune exciton binding energy. This systematic study of excitonic behavior in 1D compounds relates the nature of ground states to the unknown excited states and provides the rational design of materials with stable and efficient broadband emission.

Caging and photo-triggered uncaging of singlet oxygen by excited state engineering of electron donor-acceptor-linked molecular sensors.

Singlet oxygen (1O2), one of the most sought-after species in oxidative chemical reactions and photodynamic cancer therapy, is activated and neutralized in the atmosphere and living cells. It is essential to see "when" and "where" 1O2 is produced and delivered to understand and utilize it. There is an increasing demand for molecular sensor tools to capture, store, and supply 1O2, controlled by light and engineered singlet and triplet states, indicating the 1O2-capturing-releasing state. Here, we demonstrate the outstanding potential of an aminocoumarin-methylanthracene-based electron donor-acceptor molecule (1). Spectroscopic measurements confirm the formation of an endoperoxide (1-O2) which is not strongly fluorescent and remarkably different from previously reported 1O2 sensor molecules. Moreover, the photoexcitation on the dye in 1-O2 triggers fluorescence enhancement by the oxidative rearrangement and a competing 1O2 release. The unique ability of 1 will pave the way for the spatially and temporally controlled utilization of 1O2 in various areas such as chemical reactions and phototherapies.

Mechano-optical Modulation of Excitons and Carrier Recombination in Self-Assembled Halide Perovskite Quantum Dots.

Mechanically modulating optical properties of semiconductor nanocrystals and organic molecules are valuable for mechano-optical and optomechanical devices. Halide perovskites with excellent optical and electronic properties are promising for such applications. We report the mechanically changing excitons and photoluminescence of self-assembled formamidinium lead bromide (FAPbBr3) quantum dots. The as-synthesized quantum dots (3.6 nm diameter), showing blue emission and a short photoluminescence lifetime (2.6 ns), form 20-300 nm 2D and 3D self-assemblies with intense green emission in a solution or a film. The blue emission and short photoluminescence lifetime of the quantum dots are different from the delayed (ca. 550 ns) green emission from the assemblies. Thus, we consider the structure and excitonic properties of individual quantum dots differently from the self-assemblies. The blue emission and short lifetime of individual quantum dots are consistent with a weak dielectric screening of excitons or strong quantum confinement. The red-shifted emission and a long photoluminescence lifetime of the assemblies suggest a strong dielectric screening that weakens the quantum confinement, allowing excitons to split into free carriers, diffuse, and trap. The delayed emission suggests nongeminate recombination of diffusing and detrapped carriers. Interestingly, the green emission of the self-assembly blueshifts by applying a lateral mechanical force (ca. 4.65 N). Correspondingly, the photoluminescence lifetime decreases by 1 order of magnitude. These photoluminescence changes suggest the mechanical dissociation of the quantum dot self-assemblies and mechanically controlled exciton splitting and recombination. The mechanically changing emission color and lifetime of halide perovskite are promising for mechano-optical and optomechanical switches and sensors.

Long-Range Interfacial Charge Carrier Trapping in Halide Perovskite-C60 and Halide Perovskite-TiO2 Donor-Acceptor Films.

Interfacial electron transfer across perovskite-electron acceptor heterojunctions plays a significant role in the power-conversion efficiency of perovskite solar cells. Thus, electron donor-acceptor thin films of halide perovskite nanocrystals receive considerable attention. Nevertheless, understanding and optimizing distance- and thickness-dependent electron transfer in perovskite-electron acceptor heterojunctions are important. We reveal the distance-dependent and diffusion-controlled interfacial electron transfer across donor-acceptor heterojunction films formed by formamidinium or cesium lead bromide (FAPbBr3/CsPbBr3) perovskite nanocrystals with TiO2/C60. Self-assembled nanocrystal films prepared from FAPbBr3 show a longer photoluminescence lifetime than a solution, showing a long-range carrier migration. The acceptors quench the photoluminescence intensity but not the lifetime in a solution, revealing a static electron transfer. Conversely, the electron transfer in the films changes from dynamic to static by moving toward the donor-acceptor interface. While radiative recombination dominates the electron transfer at 800 µm or farther, the acceptors scavenge the photogenerated carriers within 100 µm. This research highlights the significance of interfacial electron transfer in perovskite films.

Real-Time Blinking Suppression of Perovskite Quantum Dots by Halide Vacancy Filling.

Despite the excellent optoelectronic properties of halide perovskites, the ionic and electronic defects adversely affect the stability and durability of perovskites and their devices. These defects, intrinsic or produced by environmental factors such as oxygen, moisture, or light, not only cause chemical reactions that disintegrate the structure and properties of perovskites but also induce undesired photoluminescence blinking to perovskite quantum dots and nanocrystals. Blinking is also caused by the nonradiative Auger processes in the photocharged quantum dots or nanocrystals. Herein, we find real-time suppression of halide vacancy-assisted nonradiative exciton recombination and photoluminescence blinking in MAPbBr3 and MAPbI3 perovskite quantum dots by filling the vacancies using halide precursors (MABr and MAI). Also, halide vacancy filling increases the photoluminescence quantum efficiencies and lifetimes of the quantum dots. We estimate the rates of halide vacancy-assisted nonradiative recombination at 1 × 108 s-1 for MAPbBr3 and 1.9 × 109 s-1 for MAPbI3 quantum dots. The real-time blinking suppression using the halide precursors and statistical analysis of the ON/OFF blinking time reveal that the halide vacancies contribute to the type-A blinking through charging and discharging. Conversely, the blinking of the quantum dots after halide vacancy filling is dominated by the type-B mechanism.

Photoluminescence investigations of sulfur quantum dots synthesized by a bubbling-assisted strategy.

Sulfur quantum dots (S-dots) emerge as promising luminescent materials owing to their remarkable optical properties. However, the mechanisms of their formation and photoluminescence remain concealed. We reveal these mechanisms by the bubbling-assisted synthesis and spectroscopic study of S-dots formed from sulfur ions produced by the alkaline oxidation of bulk sulfur under the passivation of PEG. The emission colour of the S-dots depends on the size, explained by the quantum confinement effect. The dots' luminescent quantum efficiency is strongly affected by the surface sulfur species, which is optimized by the proper surface oxidation. The simple synthesis, excellent luminescence properties, and metal-free nature attract S-dots to optoelectronic and electroluminescence applications.

Near-infrared light control of membrane potential by an electron donor-acceptor linked molecule.

Near-infrared (NIR) light control of living cellular activities is a highly desired technique for living cell manipulation because of its advantage of high penetrability towards living tissue. In this study, (π-extended porphyrin)-fullerene linked molecules are designed and synthesized to achieve NIR light control of the membrane potential. A donor-(π-extended porphyrin)-acceptor linked molecule exhibited the formation of the charge-separated state with a relatively long lifetime (0.68 µs) and a moderate quantum yield (27-31%). The hydrophilic trimethylammonium-linked triad molecule successfully altered PC12 cells' membrane potential via photoinduced intramolecular charge separation.