Bovine Serum Albumin - Hydroxyapatite Nanoflowers as Potential Local Drug Delivery System of Ciprofloxacin.

Introduction: Hybrid nanoflowers are structures consisting of organic (enzymes, proteins, nucleic acids) and inorganic components (mostly metal phosphates) with a flower-like hierarchical structure. Novel hybrid nanoflowers based on bovine serum albumin (BSA) and hydroxyapatite (HA) were obtained and characterized. Study on BSA-HA nanoflowers as potential drug delivery system is reported for the first time. Methods: Embedding ciprofloxacin in the structure of hybrid nanoflowers was confirmed by ATR-FTIR and thermogravimetric analysis. The inorganic phase of the nanoflowers was determined by X-ray diffraction. UV‒Vis spectroscopy was used to evaluate the release profiles of ciprofloxacin from nanoflowers in buffer solutions at pH 7.4 and 5. The agar disk diffusion method was used to study the antibacterial activity of the synthesized nanoflowers against Staphylococcus aureus and Pseudomonas aeruginosa. Results: Bovine serum albumin - hydroxyapatite nanoflowers were obtained with diameters of ca. 1-2 µm. The kinetics of ciprofloxacin release from nanoflowers were described by the Korsmeyer-Peppas model. The antibacterial activity of the synthesized nanoflowers was demonstrated against S. aureus and P. aeruginosa, two main pathogens found in osteomyelitis. Conclusion: The formulated nanoflowers may act as an efficient local antibiotic delivery system. Due to the use of nonhazardous, biodegradable components and benign synthesis, hybrid nanoflowers are very promising drug delivery systems that could be applied in the treatment of skeletal system infections.

Statin Action Targets Lipid Rafts of Cell Membranes: GIXD/PM-IRRAS Investigation of Langmuir Monolayers.

Lipid rafts are condensed regions of cell membranes rich in cholesterol and sphingomyelin, which constitute the target for anticholesterolemic drugs - statins. In this work, we use for the first time a combined grazing-incidence X-ray diffraction (GIXD)/polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS)/Brewster angle microscopy (BAM) approach to show the statin effect on model lipid rafts and its components assembled in Langmuir monolayers at the air-water interface. Two representatives of these drugs, fluvastatin (FLU) and cerivastatin (CER), of different hydrophobicity were chosen, while cholesterol (Chol) and sphingomyelin (SM), and their 1:1 mixture were selected to form condensed monolayers of lipid rafts. The effect of statins on the single components of lipid rafts indicated that both the hydrophobicity of the drugs and the organization of the layer determined the drug-lipid interaction. For cholesterol monolayers, only the most hydrophobic CER was effectively changing the film structure, while for the less organized sphingomyelin, the biggest effect was observed for FLU. This drug affected both the polar headgroup region as shown by PM-IRRAS results and the 2D crystalline structure of the SM monolayer as evidenced by GIXD. Measurements performed for Chol/SM 1:1 models proved also that the statin effect depends on the presence of Chol-SM complexes. In this case, the less hydrophobic FLU was not able to penetrate the binary layer at all, while exposure to the hydrophobic CER resulted in the phase separation and formation of ordered assemblies. The changes in the membrane properties were visualized by BAM images and GIXD patterns and confirmed by thermodynamic parameters of hysteresis in the Langmuir monolayer compression-decompression experiments.

Interfacial Behavior of Cubosomes: Combined Langmuir-Blodgett/Langmuir-Schaefer and AFM Investigations.

The Langmuir technique was applied for the first time to compare the layers obtained by spreading lipid liquid-crystalline nanoparticles monoolein 1-oleoyl-rac-glycerol (GMO)/Pluronic F108 cubosomes with the monolayers obtained by mixing the same components in chloroform at the air-water interface. The differences in the monolayer behavior and in the acting intermolecular forces were examined. The similarity of the isotherms obtained for the mixed components system and the cubosome-derived layer proved the disintegration of cubosomes into a single monolayer upon contact with the air-water interface. Despite the low Pluronic F108 content in both types of layers, a strong structural role of this stabilizer was also demonstrated. Cubosome-derived systems supported on hydrophilic mica substrates were prepared either using the combined Langmuir-Blodgett and Langmuir-Schaefer technique or via direct adsorption from the solution. The topographies of the obtained layers were studied by atomic force microscopy (AFM). Images obtained in the air mode revealed the disintegration of cubosomes and the formation of large crystallized structures of the polymer, while AFM imaging performed in water confirmed the presence of intact cubosomes on the surface of mica. We proved that the original structure of cubosomes remains on one condition: the films must not dry out; therefore, the aqueous environment must be preserved. This new approach provides an explanation in the ongoing discussion of what happens to lipid nanoparticles with or without cargo when they come into contact with an interface.

Lipid-based liquid crystalline materials in electrochemical sensing and nanocarrier technology.

Some biologically active substances are unstable and poorly soluble in aqueous media, at the same time exhibiting low bioavailability. The incorporation of these biologically active compounds into the structure of a lipid-based lyotropic liquid crystalline phase or nanoparticles can increase or improve their stability and transport properties, subsequent bioavailability, and applicability in general. The aim of this short overview is (1) to clarify the principle of self-assembly of lipidic amphiphilic molecules in an aqueous environment and (2) to present lipidic bicontinuous cubic and hexagonal phases and their current biosensing (with a focus on electrochemical protocols) and biomedical applications.

Model Lipid Raft Membranes for Embedding Integral Membrane Proteins: Reconstitution of HMG-CoA Reductase and Its Inhibition by Statins.

For the first time, HMG-CoA reductase, the membrane protein responsible for cholesterol synthesis, was incorporated into a lipid membrane consisting of DOPC:Chol:SM at a 1:1:1 molar ratio, which mimics the lipid rafts of cell membranes. The membrane containing the protein was generated in the form of either a proteoliposomes or a film obtained by spreading the proteoliposomes at the air-water interface to prepare a protein-rich and stable lipid layer over time. The lipid vesicle parameters were characterized using dynamic light scattering (DLS) and fluorescence microscopy. The incorporation of HMG-CoA reductase was reflected in the increased size of the proteoliposomes compared to that of the empty liposomes of model rafts. Enzyme reconstitution was confirmed by measuring the activity of NADPH, which participates in the catalytic process. The thin lipid raft films formed by spreading liposomes and proteoliposomes at the air-water interface were investigated using the Langmuir technique. The activities of the HMG-CoA reductase films were preserved over time, and the two lipid raft systems, nanoparticles and films, were exposed to solutions of fluvastatin, a HMG-CoA reductase inhibitor commonly used in the treatment of hypercholesterolemia. Both lipid raft systems constructed were useful membrane models for the determination of reductase activity and for monitoring the statin inhibitory effects and may be used for investigating other integral membrane proteins during exposure to inhibitors/activators considered to be potential drugs.

Simvastatin Coadministration Modulates the Electrostatically Driven Incorporation of Doxorubicin into Model Lipid and Cell Membranes.

Understanding the interactions between drugs and lipid membranes is a prerequisite for finding the optimal way to deliver drugs into cells. Coadministration of statins and anticancer agents has been reported to have a positive effect on anticancer therapy. In this study, we elucidate the mechanism by which simvastatin (SIM) improves the efficiency of biological membrane penetration by the chemotherapeutic agent doxorubicin (DOX) in neutral and slightly acidic solutions. The incorporation of DOX, SIM, or a combination of them (DOX:SIM) into selected single-component lipid membranes, zwitterionic unsaturated 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), neutral cholesterol, and negatively charged 1,2-dimyristoyl-sn-glycero-3-phospho-l-serine (DMPS) was assessed using the Langmuir method. The penetration of neutral lipid monolayers by the codelivery of SIM and DOX was clearly facilitated at pH 5.5, which resembles the pH conditions of the environment of cancer cells. This effect was ascribed to partial neutralization of the DOX positive charge as the result of intermolecular interactions between DOX and SIM. On the other hand, the penetration of the negatively charged DMPS monolayer was most efficient in the case of the positively charged DOX. The efficiency of the drug delivery to the cell membranes was evaluated under in vitro conditions using a panel of cancer-derived cell lines (A172, T98G, and HeLa). MTS and trypan blue exclusion assays were performed, followed by confocal microscopy and spheroid culture tests. Cells were exposed to either free drugs or drugs encapsulated in lipid carriers termed cubosomes. We demonstrated that the viability of cancer cells exposed to DOX was significantly impaired in the presence of SIM, and this phenomenon was greatly magnified when DOX and SIM were coencapsulated in cubosomes. Overall, our results confirmed the utility of the DOX:SIM combination delivery, which enhances the interactions between neutral components of cell membranes and positively charged chemotherapeutic agents.

Cubosomal Lipid Formulation for Combination Cancer Treatment: Delivery of a Chemotherapeutic Agent and Complexed α-Particle Emitter 213Bi.

Here, we propose tailored lipid liquid-crystalline carriers (cubosomes), which incorporate an anticancer drug (doxorubicin) and complexed short-lived α-emitter (bismuth-213), as a strategy to obtain more effective action toward the cancer cells. Cubosomes were formulated with doxorubicin (DOX) and an amphiphilic ligand (DOTAGA-OA), which forms stable complexes with 213Bi radionuclide. The behavior of DOX incorporated into the carrier together with the chelating agent was investigated, and the drug liberation profile was determined. The experiments revealed that the presence of the DOTAGA-OA ligand affects the activity of DOX when they are incorporated into the same carrier. This unexpected influence was explained based on the results of release studies, which proved the contribution of electrostatics in molecular interactions between the positively charged DOX and negatively charged DOTAGA-OA in acidic and neutral solutions. A significant decrease in the viability of HeLa cancer cells was achieved using sequential cell exposure: first to the radiolabeled cubosomes containing 213Bi complex and next to DOX-doped cubosomes. Therefore, the sequential procedure for the delivery of both drugs encapsulated in cubosomes is suggested for further biological and in vivo studies.

Methods of Measuring Mitochondrial Potassium Channels: A Critical Assessment.

In this paper, the techniques used to study the function of mitochondrial potassium channels are critically reviewed. The majority of these techniques have been known for many years as a result of research on plasma membrane ion channels. Hence, in this review, we focus on the critical evaluation of techniques used in the studies of mitochondrial potassium channels, describing their advantages and limitations. Functional analysis of mitochondrial potassium channels in comparison to that of plasmalemmal channels presents additional experimental challenges. The reliability of functional studies of mitochondrial potassium channels is often affected by the need to isolate mitochondria and by functional properties of mitochondria such as respiration, metabolic activity, swelling capacity, or high electrical potential. Three types of techniques are critically evaluated: electrophysiological techniques, potassium flux measurements, and biochemical techniques related to potassium flux measurements. Finally, new possible approaches to the study of the function of mitochondrial potassium channels are presented. We hope that this review will assist researchers in selecting reliable methods for studying, e.g., the effects of drugs on mitochondrial potassium channel function. Additionally, this review should aid in the critical evaluation of the results reported in various articles on mitochondrial potassium channels.

The EcCLC antiporter embedded in lipidic liquid crystalline films - molecular dynamics simulations and electrochemical methods.

Lipidic-liquid crystalline nanostructures (lipidic cubic phases), which are biomimetic and stable in an excess of water, were used as a convenient environment to investigate the transport properties of the membrane antiporter E. coli CLC-1 (EcCLC). The chloride ion transfer by EcCLC was studied by all-atom molecular dynamics simulations combined with electrochemical methods at pH 7 and pH 5. The cubic phase film was used as the membrane between the chloride donor and receiving compartments and it was placed on the glassy carbon electrode and immersed in the chloride solution. Structural characterization of lipidic mesoscopic systems with and without the incorporation of EcCLC was performed using small-angle X-ray scattering. The EcCLC transported chloride ions more efficiently at more acidic pH, and the resistance of the film decreased at lower pH. 4,4-Diisothiocyanatostilbene-2,2'-disulfonic acid (DIDS) employed as an inhibitor of the protein was shown to decrease the transport efficiency upon hydrolysis to DADS at both pH 7 and pH 5. The molecular dynamics simulations, performed for the first time in lipidic cubic phases for EcCLC, allowed studying the collective movements of chloride ions which can help in elucidating the mechanism of transporting the ions by the EcCLC antiporter. The protein modified lipidic cubic phase film is a convenient and simple system for screening potential inhibitors of integral membrane proteins, as demonstrated by the example of the EcCLC antiporter. The use of lipidic cubic phases may also be important for the further development of new electrochemical sensors for membrane proteins and enzyme electrodes.

Properties of electrode-supported lipid cubic mesophase films with embedded gramicidin A: structure and ion-transport studies.

The lipid cubic phase (LCP) is a nanomaterial composed of water channels surrounded by lipid bilayers. LCPs are stable at room temperature and are biocompatible. These features make the lipid cubic phases similar to biological membranes, and hence, are favorable for embedding membrane proteins. We show that the monoolein cubic phase deposited on the electrode forms a 3D lipid bilayer film convenient for electrochemical investigations of membrane proteins. In this research, we studied the effect of embedding an ionophoric peptide, gramicidin A (gA), on the structure and properties of the LCP film. The phase identity and structural parameters of the gramicidin-doped phase were characterized by small-angle X-ray scattering (SAXS). The potassium ion transport through the film were studied by electroanalytical methods: alternating current voltammetry (ACV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). Increased values for the current of the gramicidin-doped cubic phase compared to the empty cubic phase and changes of the EIS parameters confirmed that the peptide remained in the film in its active dimeric form. Our results show that the LCP can be considered a suitable 3D biomimetic film for the investigation of ion channels and other transporting membrane proteins, and for their application in electrochemical sensors.

Adjusting the Structure of ß-Cyclodextrin to Improve Complexation of Anthraquinone-Derived Drugs.

ß-Cyclodextrin (CD) derivatives containing an aromatic triazole ring were studied as potential carriers of the following drugs containing an anthraquinone moiety: anthraquinone-2-sulfonic acid (AQ2S); anthraquinone-2-carboxylic acid (AQ2CA); and a common anthracycline, daunorubicin (DNR). UV-Vis and voltammetry measurements were carried out to determine the solubilities and association constants of the complexes formed, and the results revealed the unique properties of the chosen CDs as effective pH-dependent drug complexing agents. The association constants of the drug complexes with the CDs containing a triazole and lipoic acid (ßCDLip) or galactosamine (ßCDGAL), were significantly larger than that of the native ßCD. The AQ2CA and AQ2S drugs were poorly soluble, and their solubilities increased as a result of complex formation with ßCDLip and ßCDGAL ligands. AQ2CA and AQ2S are negatively charged at pH 7.4. Therefore, they were less prone to form an inclusion complex with the hydrophobic CD cavity than at pH 3 (characteristic of gastric juices) when protonated. The ßCDTriazole and ßCDGAL ligands were found to form weaker inclusion complexes with the positively charged drug DNR at an acidic pH (pH 5.5) than in a neutral medium (pH 7.4) in which the drug dissociates to its neutral, uncharged form. This pH dependence is favorable for antitumor applications.

Designing a Useful Lipid Raft Model Membrane for Electrochemical and Surface Analytical Studies.

A model biomimetic system for the study of protein reconstitution or drug interactions should include lipid rafts in the mixed lipid monolayer, since they are usually the domains embedding membrane proteins and peptides. Four model lipid films composed of three components: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), cholesterol (Chol) and sphingomyelin (SM) mixed in different molar ratios were proposed and investigated using surface pressure measurements and thermodynamic analysis of the monolayers at the air-water interface and imaged by Brewster angle microscopy. The ternary monolayers were transferred from the air-water onto the gold electrodes to form bilayer films and were studied for the first time by electrochemical methods: alternative current voltammetry and electrochemical impedance spectroscopy and imaged by atomic force microscopy. In excess of DOPC, the ternary systems remained too liquid for the raft region to be stable, while in the excess of cholesterol the layers were too solid. The layers with SM in excess lead to the formation of Chol:SM complexes but the amount of the fluid matrix was very low. The equimolar content of the three components lead to the formation of a stable and well-organized assembly with well-developed raft microdomains of larger thickness, surrounded by the more fluid part of the bilayer. The latter is proposed as a convenient raft model membrane for further physicochemical studies of interactions with drugs or pollutants or incorporation of membrane proteins.

Cubosomal lipid formulation of nitroalkene fatty acids: Preparation, stability and biological effects.

Lipid nitroalkenes - nitro-fatty acids (NO2-FAs) are formed in vivo via the interaction of reactive nitrogen species with unsaturated fatty acids. The resulting electrophilic NO2-FAs play an important role in redox homeostasis and cellular stress response. This study investigated the physicochemical properties and reactivity of two NO2-FAs: 9/10-nitrooleic acid (1) and its newly prepared 1-monoacyl ester, (E)-2,3-hydroxypropyl 9/10-nitrooctadec-9-enoate (2), both synthesized by a direct radical nitration approach. Compounds 1 and 2 were investigated in an aqueous medium and after incorporation into lipid nanoparticles prepared from 1-monoolein, cubosomes 1@CUB and 2@CUB. Using an electrochemical analysis and LC-MS, free 1 and 2 were found to be unstable under acidic conditions, and their degradation occurred in an aqueous environment within a few minutes or hours. This degradation was associated with the production of the NO radical, as confirmed by fluorescence assay. In contrast, preparations 1@CUB and 2@CUB exhibited a significant increase in the stability of the loaded 1 and 2 up to several days to weeks. In addition to experimental data, density functional theory-based calculation results on the electronic structure and structural variability (open and closed configuration) of 1 and 2 were obtained. Finally, experiments with a human HaCaT keratinocyte cell line demonstrated the ability of 1@CUB and 2@CUB to penetrate through the cytoplasmic membrane and modulate cellular pathways, which was exemplified by the Keap1 protein level monitoring. Free 1 and 2 and the cubosomes prepared from them showed cytotoxic effect on HaCaT cells with IC50 values ranging from 1 to 8 µM after 24 h. The further development of cubosomal preparations with embedded electrophilic NO2-FAs may not only contribute to the field of fundamental research, but also to their application using an optimized lipid delivery vehicle.

Three-Dimensional Printable Conductive Semi-Interpenetrating Polymer Network Hydrogel for Neural Tissue Applications.

Intrinsically conducting polymers (ICPs) are widely used to fabricate biomaterials; their application in neural tissue engineering, however, is severely limited because of their hydrophobicity and insufficient mechanical properties. For these reasons, soft conductive polymer hydrogels (CPHs) are recently developed, resulting in a water-based system with tissue-like mechanical, biological, and electrical properties. The strategy of incorporating ICPs as a conductive component into CPHs is recently explored by synthesizing the hydrogel around ICP chains, thus forming a semi-interpenetrating polymer network (semi-IPN). In this work, a novel conductive semi-IPN hydrogel is designed and synthesized. The hybrid hydrogel is based on a poly(N-isopropylacrylamide-co-N-isopropylmethacrylamide) hydrogel where polythiophene is introduced as an ICP to provide the system with good electrical properties. The fabrication of the hybrid hydrogel in an aqueous medium is made possible by modifying and synthesizing the monomers of polythiophene to ensure water solubility. The morphological, chemical, thermal, electrical, electrochemical, and mechanical properties of semi-IPNs were fully investigated. Additionally, the biological response of neural progenitor cells and mesenchymal stem cells in contact with the conductive semi-IPN was evaluated in terms of neural differentiation and proliferation. Lastly, the potential of the hydrogel solution as a 3D printing ink was evaluated through the 3D laser printing method. The presented results revealed that the proposed 3D printable conductive semi-IPN system is a good candidate as a scaffold for neural tissue applications.

Flavin-Helicene Amphiphilic Hybrids: Synthesis, Characterization, and Preparation of Surface-Supported Films.

This work reports on the preparation and structural characterization of flavo[7]helicene 1 (flavin-[7]helicene conjugate), which was subsequently characterized at the molecular level in either an aqueous environment or an organic phase, at the supramolecular level in the form of polymeric layers, and also embedded in a lipidic mesophase environment to study the resulting properties of such a hybrid relative to its parent molecules. The flavin benzo[g]pteridin-2,4-dione (isoalloxazine) was selected for conjugation because of its photoactivity and reversible redox behavior. Compound 1 was prepared from 2-nitroso[6]helicene and 6-methylamino-3-methyluracil, and characterized using common structural and spectroscopic tools: circular dichroism (CD), circularly polarized luminescence (CPL) spectroscopy, cyclic voltammetry (CV), and DFT quantum calculations. In addition, a methodology that allows the loading of 1 enantiomers into an internally nanostructured lipid (1-monoolein) matrix was developed.

Biosupercapacitor with an enzymatic cascade at the anode working in a sucrose solution.

In this report, we demonstrate the advantages of the dual-mode operation of an enzymatic biosupercapacitor with nanostructured polypyrrole/nanocellulose, gold nanoparticle-based paper electrodes, sucrose as the anode fuel and molecular oxygen as the oxidant. The device allowed conversion of the sucrose biofuel, and offered storage of the generated power in the same, small-scale device. The external and internal biosupercapacitor re-charging modes were compared. The specific capacitance of the device was 1.8 F cm-2 at a discharge current density of 1 mA cm-2. The cell used in the charge/discharge mode of operation allowed retention of 49% of the initial capacitance after eight days of exhaustive discharging under external load. The discontinuous capacitive mode, preserved the biocatalysts activity for much longer time. The use of such enzyme-based electrical energy sources in the capacitive mode i.e. under discontinuous charging was demonstrated as a solution for preserving high specific capacitance and long-term operational stability.

Incorporation of simvastatin into lipid membranes: Why deliver a statin in form of inclusion complex with hydrophilic cyclodextrin.

In this work, the effects of simvastatin (SIM), (2-hydroxypropyl)-ß-cyclodextrin (HPßCD) and their complex (SIM:HPßCD) on the structure and properties of lipid membranes were investigated for the first time by Langmuir technique combined with PM-IRRAS spectroscopy. An improved understanding of the differences of the interactions between free SIM, and SIM in the form of an inclusion complex with HPßCD with the lipid membrane will improve the development of preparation methods for in vivo applications. Monolayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), cholesterol (Chol) and their mixture DMPC:Chol (7:3) served as simple models of one leaflet of the cell membrane. The penetration of well-organized lipid layers by simvastatin lead to their fluidization but the extent of this unwanted effect was smaller when the drug was delivered in the form of the SIM:HPßCD complex. Surface pressure vs. time dependencies showed that the drug encapsulated with cyclodextrin dissociated from the complex upon contact with the lipid layer and the weak interactions between the exterior polar part of the HPßCD and the polar headgroups of the lipid layer facilitated smooth incorporation of the released lipophilic drug into the membrane. At a longer time-scale, the HPßCD ligand released from the complex removed some cholesterol, but not DMPC, from the lipid layer, hence, similarly to the enzyme inhibiting action of statins - it lead to the decrease of the amount of cholesterol in the membrane. Delivery of simvastatin in the form of an inclusion complex with HPßCD is proposed as an approach improving its bioavailability in the cholesterol-lowering therapies.

Lipid membranes exposed to dispersions of phytantriol and monoolein cubosomes: Langmuir monolayer and HeLa cell membrane studies.

The interactions of liquid-crystalline nanoparticles based on lipid-like surfactants, glyceryl monooleate, monoolein (GMO) and 1,2,3-trihydroxy-3,7,11,15-tetramethylhexadecane, phytantriol (PT) with selected model lipid membranes prepared by Langmuir technique were compared. Monolayers of DPPC, DMPS and their mixture DPPC:DMPS 87:13 mol% were used as simple models of one leaflet of a cell membrane. The incorporation of cubosomes into the lipid layers spread at the air-water interface was followed by surface-pressure measurements and Brewster angle microscopy. The cubosome - membrane interactions lead to the fluidization of the model membranes but this effect depended on the composition of the model membrane and on the type of cubosomes. The interactions of PT cubosomes with lipid layers, especially DMPS-based monolayer were stronger compared with those of GMO-based nanoparticles. The kinetics of incorporation of cubosomal material into the lipid layer was influenced by the extent of hydration of the polar headgroups of the lipid: faster in the case of smaller, less hydrated polar groups of DMPS than for strongly hydrated uncharged choline of DPPC. The membrane disrupting effect of cubosomes increased at longer times of the lipid membrane exposure to the cubosome solution and at larger carrier concentrations. Langmuir monolayer observations correspond well to results of studies of HeLa cells exposed to cubosomes. The larger toxicity of PT cubosomes was confirmed by MTS. Their ability to disrupt lipid membranes was imaged by confocal microscopy. On the other hand, PT cubosomes easily penetrated cellular membranes and released cargo into various cellular compartments more effectively than GMO-based nanocarriers. Therefore, at low concentrations, they may be further investigated as a promising drug delivery tool.

Lipidic Cubic-Phase Nanoparticles (Cubosomes) Loaded with Doxorubicin and Labeled with 177Lu as a Potential Tool for Combined Chemo and Internal Radiotherapy for Cancers.

Lipid liquid-crystalline nanoparticles (cubosomes) were used for the first time as a dual-modality drug delivery system for internal radiotherapy combined with chemotherapy. Monoolein (GMO)-based cubosomes were prepared by loading the anticancer drug, doxorubicin and a commonly used radionuclide, low-energy beta (ß-)-emitter, 177Lu. The radionuclide was complexed with a long chain derivative of DOTAGA (DOTAGA-OA). The DOTAGA headgroup of the chelator was exposed to the aqueous channels of the cubosomes, while, concerning OA, the hydrophobic tail was embedded in the nonpolar region of the lipid bilayer matrix, placing the radioactive dopant in a stable manner inside the cubosome. The cubosomes containing doxorubicin and the radionuclide complex increased the cytotoxicity measured by the viability of the treated HeLa cells compared with the effect of single-drug cubosomes containing either the DOX DOTAGA-OA or DOTAGA-OA-177Lu complex. Multifunctional lipidic nanoparticles encapsulating the chemotherapeutic agent together with appropriately complexed (ß-) radionuclide are proposed as a potential strategy for effective local therapy of various cancers.

Water-soluble galactosamine derivative of ß-cyclodextrin as protective ligand and targeted carrier for delivery of toxic anthracycline drug.

ß-cyclodextrin modified with an electron-rich aromatic triazole linker and targeting moiety (galactosamine) was synthesized and studied as a carrier for the anticancer drug, doxorubicin (DOX), with the aim of targeting the pathological cells, reducing the cardiotoxic side effects and increasing the binding of the drug to DNA. The ß-cyclodextrins modified with galactosamine (ßCDGAL) are non-toxic and highly soluble in aqueous medium compared to the native ßCD and ßCD modified only with aromatic moiety, such as triazole linker. Molecular modelling and NMR study gave a deeper insight into the ligand structure, providing an explanation for its increased solubility, and the drug-ligand interactions. The triazole linker strengthened the drug binding and introduced pH dependence of the complex stability constants for ßCDGAL derivative, as confirmed by the voltammetry measurements. Spectroscopic studies have shown that entrapment of the DOX in ßCDGAL cavity reduces the stability constant of the DOX:Fe(III) complex responsible for the production of cardiotoxic reactive oxygen species and additionally supports the binding of the drug to the double strand DNA. The MTT assay and confocal microscopy results showed that despite encapsulation of the drug in the cyclodextrin molecule, its cytotoxic effect on the liver cancer cell line (HepG2) is comparable to that of the free, non-protected drug.