Accessible Telemedicine Diagnostics with ELISA in a 3D Printed Pipette Tip.

We report herein a novel pipet-based "ELISA in a tip" as a new versatile diagnostic tool featuring better sensitivity, shorter incubation time, accessibility, and low sample and reagent volumes compared to traditional ELISA. Capture and analysis of data by a cell phone facilitates electronic delivery of results to health care providers. Pipette tips were designed and 3D printed as adapters to fit most commercial 50-200 µL pipettes. Capture antibodies (Ab1) are immobilized on the inner walls of the pipet tip, which serves as the assay compartment where samples and reagents are moved in and out by pipetting. Signals are generated using colorimetric or chemiluminescent (CL) reagents and can be quantified using a cell phone, CCD camera, or plate reader. We utilized pipet-tip ELISA to detect four cancer biomarker proteins with detection limits similar to or lower than microplate ELISAs at 25% assay cost and time. Recoveries of these proteins from spiked human serum were 85-115% or better, depending slightly on detection mode. Using CCD camera quantification of CL with femto-luminol reagent gave limits of detection (LOD) as low as 0.5 pg/mL. Patient samples (13) were assayed for 3 biomarker proteins with results well correlated to conventional ELISA and an established microfluidic electrochemical immunoassay.

Evaluating Metabolite-Related DNA Oxidation and Adduct Damage from Aryl Amines Using a Microfluidic ECL Array.

Damage to DNA from the metabolites of drugs and pollutants constitutes a major human toxicity pathway known as genotoxicity. Metabolites can react with metal ions and NADPH to oxidize DNA or participate in SN2 reactions to form covalently linked adducts with DNA bases. Guanines are the main DNA oxidation sites, and 8-oxo-7,8-dihydro-2-deoxyguanosine (8-oxodG) is the initial product. Here we describe a novel electrochemiluminescent (ECL) microwell array that produces metabolites from test compounds and measures relative rates of DNA oxidation and DNA adduct damage. In this new array, films of DNA, metabolic enzymes, and an ECL metallopolymer or complex assembled in microwells on a pyrolytic graphite wafer are housed in dual microfluidic chambers. As reactant solution passes over the wells, metabolites form and can react with DNA in the films to form DNA adducts. These adducts are detected by ECL from a RuPVP polymer that uses DNA as a coreactant. Aryl amines also combine with Cu2+ and NADPH to form reactive oxygen species (ROS) that oxidize DNA. The resulting 8-oxodG was detected selectively by ECL-generating bis(2,2'-bipyridine)-(4-(1,10-phenanthrolin-6-yl)-benzoic acid)Os(II). DNA/enzyme films on magnetic beads were oxidized similarly, and 8-oxodG determined by LC/MS/MS enabled array standardization. The array limit of detection for oxidation was 720 8-oxodG per 106 nucleobases. For a series of aryl amines, metabolite-generated DNA oxidation and adduct formation turnover rates from the array correlated very well with rodent 1/TD50 and Comet assay results.

Albumin removal from human serum using surface nanopockets on silica-coated magnetic nanoparticles.

Selective removal of albumin from human serum is an essential step prior to proteomic analyses, especially when using mass spectrometry. Here we report stable synthetic nanopockets on magnetic nanoparticle surfaces that bind to human serum albumin (HSA) with high affinity and specificity. The nanopockets are created by templating HSA on 200 nm silica-coated paramagnetic nanoparticles using polymer layers made using 4 organo-silane monomers. These monomers have amino acid-like side chains providing hydrophobic, hydrophilic and H-bonding interactions that closely mimic features of binding sites on antibodies. The binding capacity of the material was 21 mg HSA g-1, and consistently removed ∼88% albumin from human serum in multiple repeated use.

Screening Genotoxicity Chemistry with Microfluidic Electrochemiluminescent Arrays.

This review describes progress in the development of electrochemiluminescent (ECL) arrays aimed at sensing DNA damage to identify genotoxic chemistry related to reactive metabolites. Genotoxicity refers to chemical or photochemical processes that damage DNA with toxic consequences. Our arrays feature DNA/enzyme films that form reactive metabolites of test chemicals that can subsequently react with DNA, thus enabling prediction of genotoxic chemical reactions. These high-throughput ECL arrays incorporating representative cohorts of human metabolic enzymes provide a platform for determining chemical toxicity profiles of new drug and environmental chemical candidates. The arrays can be designed to identify enzymes and enzyme cascades that produce the reactive metabolites. We also describe ECL arrays that detect oxidative DNA damage caused by metabolite-mediated reactive oxygen species. These approaches provide valuable high-throughput tools to complement modern toxicity bioassays and provide a more complete toxicity prediction for drug and chemical product development.

Sodium hydroxide catalyzed monodispersed high surface area silica nanoparticles.

Understanding of the synthesis kinetics and our ability to modulate medium conditions allowed us to generate nanoparticles via an ultra-fast process. The synthesis medium is kept quite simple with tetraethyl orthosilicate (TEOS) as precursor and 50% ethanol and sodium hydroxide catalyst. Synthesis is performed under gentle conditions at 20 °C for 20 min Long synthesis time and catalyst-associated drawbacks are most crucial in silica nanoparticle synthesis. We have addressed both these bottlenecks by replacing the conventional Stober catalyst, ammonium hydroxide, with sodium hydroxide. We have reduced the overall synthesis time from 20 to 1/3 h, ~60-fold decrease, and obtained highly monodispersed nanoparticles with 5-fold higher surface area than Stober particles. We have demonstrated that the developed NPs with ~3-fold higher silane can be used as efficient probes for biosensor applications.

Electrochemiluminescence at Bare and DNA-Coated Graphite Electrodes in 3D-Printed Fluidic Devices.

Clear plastic fluidic devices with ports for incorporating electrodes to enable electrochemiluminescence (ECL) measurements were prepared using a low-cost, desktop three-dimensional (3D) printer based on stereolithography. Electrodes consisted of 0.5 mm pencil graphite rods and 0.5 mm silver wires inserted into commercially available 1/4 in.-28 threaded fittings. A bioimaging system equipped with a CCD camera was used to measure ECL generated at electrodes and small arrays using 0.2 M phosphate buffer solutions containing tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate ([Ru(bpy)3]2+) with 100 mM tri-n-propylamine (TPA) as the coreactant. ECL signals produced at pencil graphite working electrodes were linear with respect to [Ru(bpy)3]2+ concentration for 9-900 µM [Ru(bpy)3]2+. The detection limit was found to be 7 µM using the CCD camera with exposure time set at 10 s. Electrode-to-electrode ECL signals varied by ±7.5%. Device performance was further evaluated using pencil graphite electrodes coated with multilayer poly(diallyldimethylammonium chloride) (PDDA)/DNA films. In these experiments, ECL resulted from the reaction of [Ru(bpy)3]3+ with guanines of DNA. ECL produced at these thin-film electrodes was linear with respect to [Ru(bpy)3]2+ concentration from 180 to 800 µM. These studies provide the first demonstration of ECL measurements obtained using a 3D-printed closed-channel fluidic device platform. The affordable, high-resolution 3D printer used in these studies enables easy, fast, and adaptable prototyping of fluidic devices capable of incorporating electrodes for measuring ECL.

Electrochemiluminescent Array to Detect Oxidative Damage in ds-DNA Using [Os(bpy)2(phen-benz-COOH)]2+/Nafion/Graphene Films.

Reactive oxygen species (ROS) oxidize guanosines in DNA to form 8-oxo-7,8-dihydro-2-deoxyguanosine (8-oxodG), a biomarker for oxidative stress. Herein we describe a novel 64-microwell electrochemiluminescent (ECL) array enabling sensitive multiplexed detection of 8-oxodG in ds-DNA without hydrolysis. Films of Nafion and reduced graphene oxide containing ECL dye [Os(bpy)2(phen-benz-COOH)]2+ (OsNG, {bpy= 2,2'-bipyridine and phen-benz-COOH = (4-(1,10-phenanthrolin-6-yl) benzoic acid)}) were assembled into microwells on a pyrolytic graphite wafer to detect 8-oxodG in oligonucleotides by electrochemiluminescence (ECL). DNA oxidation by Fenton's reagent or by ROS formation during redox cycles involving NADPH, CuII, and model metabolites was monitored. UPLC-MS/MS of oxidized DNA samples were used for calibration. Detection limit for the fluidic arrays was one 8-oxodG per 670 intact nucleobases, or 0.15%. The method is sensitive enough to evaluate DNA oxidation from biologically relevant ROS-generating reactions of CuII, NADPH, and model metabolites.

Electrocatalytic Oxidation of Alcohols, Tripropylamine, and DNA with Ligand-Free Gold Nanoclusters on Nitrided Carbon.

Electrocatalytic properties of ligand-free gold nanoclusters (AuNCs, <2 nm) grown on nitrided carbon supports (denoted as AuNCs@N-C) were evaluated for the oxidation of representative organic molecules including alcohols, an amine, and deoxyguanosine in oligonucleotides. AuNCs@N-C catalysts were incorporated into films of architecture {PDDA/AuNCs@N-C} n by using layer-by-layer assembly with oppositely charged poly(diallyldimethylammonium) (PDDA) on pyrolytic graphite (PG) electrodes. Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were used to survey the electrocatalytic properties of these AuNCs@N-C films. Ligand-free AuNCs in these films demonstrated excellent electrocatalytic oxidation activity with maximum peak currents and the lowest potentials for oxidizing ethanol, propanol, and tripropylamine (TprA) compared to controls with Au-surface capping agents or to larger sized Au nanocrystals on the nitrided carbon supports. EIS kinetic studies showed that ligand-free AuNCs films have the smallest charge-transfer resistance, largest electrochemically active surface area, and largest apparent standard rate constants, as compared to the control films for all compounds examined. DNA films on AuNCs@N-C were oxidized at deoxyguanosine moieties with good catalytic activity that depended on charge transport within the films.

High-throughput metabolic genotoxicity screening with a fluidic microwell chip and electrochemiluminescence.

A high throughput electrochemiluminescent (ECL) chip was fabricated and integrated into a fluidic system for screening toxicity-related chemistry of drug and pollutant metabolites. The chip base is conductive pyrolytic graphite onto which are printed 64 microwells capable of holding one-µL droplets. Films combining DNA, metabolic enzymes and an ECL-generating ruthenium metallopolymer (Ru(II)PVP) are fabricated in these microwells. The system runs metabolic enzyme reactions, and subsequently detects DNA damage caused by reactive metabolites. The performance of the chip was tested by measuring DNA damage caused by metabolites of the well-known procarcinogen benzo[a]pyrene (B[a]P). Liver microsomes and cytochrome P450 (cyt P450) enzymes were used with and without epoxide hydrolase (EH), a conjugative enzyme required for multi-enzyme bioactivation of B[a]P. DNA adduct formation was confirmed by determining specific DNA-metabolite adducts using similar films of DNA/enzyme on magnetic bead biocolloid reactors, hydrolyzing the DNA, and analyzing by capillary liquid chromatography-mass spectrometry (CapLC-MS/MS). The fluidic chip was also used to measure IC50-values of inhibitors of cyt P450s. All results show good correlation with reported enzyme activity and inhibition assays.