On-Chip Electrostatic Actuation of a Photonic Wire Antenna Embedding Quantum Dots.

A photonic wire antenna embedding individual quantum dots (QDs) constitutes a promising platform for both quantum photonics and hybrid nanomechanics. We demonstrate here an integrated device in which on-chip electrodes can apply a static or oscillating bending force to the upper part of the wire. In the static regime, we achieve control over the bending direction and apply at will tensile or compressive mechanical stress on any QD. This results in a blue shift or red shift of their emission, with direct application to the realization of broadly tunable sources of quantum light. As a first illustration of operation in the dynamic regime, we excite the wire fundamental flexural mode and use the QD emission to detect the mechanical vibration. With an estimated operation bandwidth in the GHz range, electrostatic actuation opens appealing perspectives for the exploration of QD-nanowire hybrid mechanics with high-frequency vibrational modes.

The role of surface states and point defects on optical properties of InGaN/GaN multi-quantum wells in nanowires grown by molecular beam epitaxy.

The optical properties of nanowire-based InGaN/GaN multiple quantum wells (MQWs) heterostructures grown by plasma-assisted molecular beam epitaxy are investigated. The beneficial effect of an InGaN underlayer grown below the active region is demonstrated and assigned to the trapping of point defects transferred from the pseudo-template to the active region. The influence of surface recombination is also investigated. For low InN molar fraction value, we demonstrate that AlOxdeposition efficiently passivate the surface. By contrast, for large InN molar fraction, the increase of volume non-radiative recombination, which we assign to the formation of additional point defects during the growth of the heterostructure dominates surface recombination. The inhomogeneous luminescence of single nanowires at the nanoscale, namely a luminescent ring surrounding a less luminescent centre part points towards an inhomogeneous spatial distribution of the non-radiative recombination center tentatively identified as intrinsic point defects created during the MQWs growth. These results can contribute to improve the performances of microLEDs in the visible range.

Tailoring the properties of quantum dot-micropillars by ultrafast optical injection of free charge carriers.

We review recent studies of cavity switching induced by the optical injection of free carriers in micropillar cavities containing quantum dots. Using the quantum dots as a broadband internal light source and a streak camera as detector, we track the resonance frequencies for a large set of modes with picosecond time resolution. We report a record-fast switch-on time constant (1.5 ps) and observe major transient modifications of the modal structure of the micropillar on the 10 ps time scale: mode crossings are induced by a focused symmetric injection of free carriers, while a lifting of several mode degeneracies is observed when off-axis injection breaks the rotational symmetry of the micropillar. We show theoretically and experimentally that cavity switching can be used to tailor the dynamic properties of the coupled QD-cavity system. We report the generation of ultrashort spontaneous emission pulses (as short as 6 ps duration) by a collection of frequency-selected QDs in a switched pillar microcavity. These pulses display a very small coherence length, attractive for ultrafast speckle-free imaging. Moreover, the control of QD-mode coupling on the 10 ps time scale establishes cavity switching as an appealing resource for quantum photonics.

Role of Underlayer for Efficient Core-Shell InGaN QWs Grown on m-plane GaN Wire Sidewalls.

Different types of buffer layers such as InGaN underlayer (UL) and InGaN/GaN superlattices are now well-known to significantly improve the efficiency of c-plane InGaN/GaN-based light-emitting diodes (LEDs). The present work investigates the role of two different kinds of pregrowth layers (low In-content InGaN UL and GaN UL namely "GaN spacer") on the emission of the core-shell m-plane InGaN/GaN single quantum well (QW) grown around Si-doped c̅-GaN microwires obtained by silane-assisted metal organic vapor phase epitaxy. According to photo- and cathodoluminescence measurements performed at room temperature, an improved efficiency of light emission at 435 nm with internal quantum efficiency >15% has been achieved by adding a GaN spacer prior to the growth of QW. As revealed by scanning transmission electron microscopy, an ultrathin residual layer containing Si located at the wire sidewall surfaces favors the formation of high density of extended defects nucleated at the first InGaN QW. This contaminated residual incorporation is buried by the growth of the GaN spacer and avoids the structural defect formation, therefore explaining the improved optical efficiency. No further improvement is observed by adding the InGaN UL to the structure, which is confirmed by comparable values of the effective carrier lifetime estimated from time-resolved experiments. Contrary to the case of planar c-plane QW where the improved efficiency is attributed to a strong decrease of point defects, the addition of an InGaN UL seems to have no influence in the case of radial m-plane QW.

All-Optical Mapping of the Position of Quantum Dots Embedded in a Nanowire Antenna.

Nanowire antennas embedding single quantum dots (QDs) have recently emerged as a versatile solid-state platform for quantum optics. Within the nanowire section, the emitter position simultaneously determines the strength of the light-matter interaction, as well as the coupling to potential decoherence channels. Therefore, to quantitatively understand device performance and guide future optimization, it is highly desirable to map the emitter position with an accuracy much smaller than the waveguide diameter, on the order of a few hundreds of nanometers. We introduce here a nondestructive, all-optical mapping technique that exploits the QD emission into two guided modes with different transverse profiles. These two modes are fed by the same emitter and thus interfere. The resulting intensity pattern, which is highly sensitive to the emitter position, is resolved in the far-field using Fourier microscopy. We demonstrate this technique on a standard microphotoluminescence setup and map the position of individual QDs in a nanowire antenna with a spatial resolution of ±10 nm. This work opens important perspectives for the future development of light-matter interfaces based on nanowire antennas. Beyond single-QD devices, it will also provide a valuable tool for the investigation of collective effects that imply several emitters coupled to an optical waveguide.

Large and Uniform Optical Emission Shifts in Quantum Dots Strained along Their Growth Axis.

We introduce a calibration method to quantify the impact of external mechanical stress on the emission wavelength of distinct quantum dots (QDs). Specifically, these emitters are integrated in a cross-section of a semiconductor core wire and experience a longitudinal strain that is induced by an amorphous capping shell. Detailed numerical simulations show that, thanks to the shell mechanical isotropy, the strain in the core is uniform, which enables a direct comparison of the QD responses. Moreover, the core strain is determined in situ by an optical measurement, yielding reliable values for the QD emission tuning slope. This calibration technique is applied to self-assembled InAs QDs submitted to incremental elongation along their growth axis. In contrast to recent studies conducted on similar QDs submitted to a uniaxial stress perpendicular to the growth direction, optical spectroscopy reveals up to ten times larger tuning slopes, with a moderate dispersion. These results highlight the importance of the stress direction to optimize the QD optical shift, with general implications, both in static and dynamic regimes. As such, they are in particular relevant for the development of wavelength-tunable single-photon sources or hybrid QD opto-mechanical systems.

Dielectric GaAs antenna ensuring an efficient broadband coupling between an InAs quantum dot and a Gaussian optical beam.

We introduce the photonic trumpet, a dielectric structure which ensures a nearly perfect coupling between an embedded quantum light source and a Gaussian free-space beam. A photonic trumpet exploits both the broadband spontaneous emission control provided by a single-mode photonic wire and the expansion of this mode within a conical taper. Numerical simulations highlight the performance and robustness of this concept. As a first application in the field of quantum optics, we report the realization of an ultrabright single-photon source. The device, a high aspect ratio GaAs photonic trumpet containing a few InAs quantum dots, demonstrates a first-lens external efficiency of 0.75±0.1 and an external coupling efficiency to a Gaussian beam as high as 0.58±0.08.

Atomistic simulations of the optical absorption of type-II CdSe/ZnTe superlattices.

We perform accurate tight binding simulations to design type-II short-period CdSe/ZnTe superlattices suited for photovoltaic applications. Absorption calculations demonstrate a very good agreement with optical results with threshold strongly depending on the chemical species near interfaces.

Linearly polarized, single-mode spontaneous emission in a photonic nanowire.

We introduce dielectric elliptical photonic nanowires to funnel efficiently the spontaneous emission of an embedded emitter into a single optical mode. Inside a wire with a moderate lateral aspect ratio, the electromagnetic environment is largely dominated by a single guided mode, with a linear polarization oriented along the ellipse major axis. The resulting monomode spontaneous emission is maintained over a broad wavelength range, a key asset of this 1D photonic structure. Our theoretical analysis is completed by an experimental study of GaAs elliptical photonic wires with embedded InAs quantum dots. In particular, the fraction of collected photons with the desired linear polarization can exceed 95%.

Inhibition, enhancement, and control of spontaneous emission in photonic nanowires.

We experimentally investigate the spontaneous emission (SE) rates of single InAs quantum dots embedded in GaAs photonic nanowires. For a diameter leading to the optimal confinement of the fundamental guided mode HE11, the coupling to HE11 dominates the SE process and an increase of the SE rate by a factor of 1.5 is achieved. When the diameter is decreased, the coupling to this mode vanishes rapidly, thus allowing the coupling to the other radiation modes to be probed. In these conditions, a SE inhibition factor of 16, equivalent to the one obtained in state-of-the-art photonic crystals, is measured. These results, which are supported by fully vectorial calculations, confirm the potential of photonic nanowires for a nearly perfect, broadband SE control.

Chelating ligands for nanocrystals' surface functionalization.

A new family of ligands for the surface functionalization of CdSe nanocrystals is proposed, namely alkyl or aryl derivatives of carbodithioic acids (R-C(S)SH). The main advantages of these new ligands are as follows: they nearly quantitatively exchange the initial surface ligands (TOPO) in very mild conditions; they significantly improve the resistance of nanocrystals against photooxidation because of their ability of strong chelate-type binding to metal atoms; their relatively simple preparation via Grignard intermediates facilitates the development of new bifunctional ligands containing, in addition to the anchoring carbodithioate group, a second function, which enables the grafting of molecules or macromolecules of interest on the nanocrystal surface. To give an example of this approach, we report, for the first time, the grafting of an electroactive oligomer from the polyaniline family-aniline tetramer-on CdSe nanocrystals after their functionalization with 4-formyldithiobenzoic acid. The grafting proceeds via a condensation reaction between the aldehyde group of the ligand and the terminal primary amine group of the tetramer. The resulting organic/inorganic hybrid exhibits complete extinction of the fluorescence of its constituents, indicating efficient charge or energy transfer between the organic and the inorganic semiconductors.