Radiation, optical, power flow, and electrical diagnostics at the Z facility: Layout and techniques utilized to operate in the harsh environment.

The Z machine is a current driver producing up to 30 MA in 100 ns that utilizes a wide range of diagnostics to assess accelerator performance and target behavior conduct experiments that use the Z target as a source of radiation or high pressures. We review the existing suite of diagnostic systems, including their locations and primary configurations. The diagnostics are grouped in the following categories: pulsed power diagnostics, x-ray power and energy, x-ray spectroscopy, x-ray imaging (including backlighting, power flow, and velocimetry), and nuclear detectors (including neutron activation). We will also briefly summarize the primary imaging detectors we use at Z: image plates, x-ray and visible film, microchannel plates, and the ultrafast x-ray imager. The Z shot produces a harsh environment that interferes with diagnostic operation and data retrieval. We term these detrimental processes "threats" of which only partial quantifications and precise sources are known. We summarize the threats and describe techniques utilized in many of the systems to reduce noise and backgrounds.

The design of a line velocity interferometer for any reflector for inertial confinement experiments on the Z-machine.

A line VISAR (Velocity Interferometer System for Any Reflector) has been designed and commissioned at the Sandia National Laboratory's Z-machine. The instrument consists of an F/2 collection system, beam transport, and an interferometer table that contains two Mach-Zehnder type interferometers and an eight channel Gated Optical Imaging (GOI) system. The VISAR probe laser operates at the 532 nm wavelength, and the GOI bandpass is 540-600 nm. The output of each interferometer is passed to an optical streak camera with four selectable sweep speeds. The system is designed with three interchangeable optics modules to select a full field of view of 1 mm, 2 mm, or 4 mm. The optical beam transport system connects the target image plane to the interferometers and the gated optical imagers. The target is integrated into a sacrificial final optics assembly that is integral to the transport beamline.

HIGH-PRESSURE PHYSICS. Direct observation of an abrupt insulator-to-metal transition in dense liquid deuterium.

Eighty years ago, it was proposed that solid hydrogen would become metallic at sufficiently high density. Despite numerous investigations, this transition has not yet been experimentally observed. More recently, there has been much interest in the analog of this predicted metallic transition in the dense liquid, due to its relevance to planetary science. Here, we show direct observation of an abrupt insulator-to-metal transition in dense liquid deuterium. Experimental determination of the location of this transition provides a much-needed benchmark for theory and may constrain the region of hydrogen-helium immiscibility and the boundary-layer pressure in standard models of the internal structure of gas-giant planets.

Magnetic field measurements via visible spectroscopy on the Z machine.

Sandia's Z Machine uses its high current to magnetically implode targets relevant to inertial confinement fusion. Since target performance is highly dependent on the applied drive field, measuring magnetic field at the target is essential for accurate simulations. Recently, the magnetic field at the target was measured through splitting of the sodium 3s-3p doublet at 5890 and 5896 Å. Spectroscopic dopants were applied to the exterior of the target, and spectral lines were observed in absorption. Magnetic fields in excess of 200 T were measured, corresponding to drive currents of approximately 5 MA early in the pulse.

Development and use of a two-dimensional interferometer to measure mass flow from a multi-shell Z-pinch gas puff.

For gas puff Z-pinches, the K-shell x-ray yield is maximized with the use of a multi-shell nozzle. Optimization of the yield, verification of hydrodynamic models of the nozzle flows, and plausible MHD code modeling of the implosions require data on the radial and axial (R,Z) distribution of mass in the nozzle's flow field. Interferometry is a well-established technique for acquiring such data. We describe the development and use of a two-dimensional interferometer with emphasis on the required data reduction methods. We also show that the instrument can derive the flow from each individual nozzle in a multi-shell system.

Widely tunable midinfrared difference frequency generation in orientation-patterned GaAs pumped with a femtosecond Tm-fiber system.

We demonstrate a midinfrared source tunable from 6.7 to 12.7 µm via difference frequency generation (DFG) in orientation-patterned GaAs, with 1.3 mW average output power. The input pulses are generated via Raman self-frequency shift of a femtosecond Tm-doped-fiber laser system in a fluoride fiber. We numerically model the DFG process and show good agreement between simulations and experiments. We use this numerical model to show an improved design using longer pump pulses.

Management of fecal incontinence in adults.

This article summarises the findings from the Conservative Management of Faecal Incontinence in Adults Committee of the International Consultation on Incontinence. We conducted comprehensive literature searches using the following keywords combined with the relevant intervention: "anal, anorectal, bowel, faecal, fecal, rectal, stool" and "continent$ or incontinent$," Prevalence etimates for faecal or anal incontinence vary widely, from 2.2% to 2.5%. Expert opinion supports the use of general health education, patient teaching about bowel function and advice on lifestyle modification, but the evidence base is small. Unlike urinary incontinence, few "lifestyle" associations have been identified with FI and little is known about whether interventions designed to reduce potential risk factors might improve FI. The article summarises the evidence and recommendations from the committee for clinical practice and future research.

Coping, meaning in life, and quality of life in congestive heart failure patients.

OBJECTIVE: The present study examined (1) whether particular coping strategies used to deal with congestive heart failure (CHF) are related to meaning in life across time, and (2) whether meaning in life mediates the effect of coping on health-related quality of life. METHODS: A sample of 155 CHF patients received questionnaire packets at two time points, 6 months apart. Main outcome measures included Meaning in Life and Mental and Physical Health-Related Quality of Life (HRQOL). RESULTS: Coping (particularly acceptance/positive reinterpretation and religious coping) was not only related to meaning in life, but also to increased meaning over time. Further, meaning in life was related to both mental and physical components of HRQOL. However, coping was minimally related to HRQOL and its effects were not mediated by meaning in life. CONCLUSIONS: These results add to accumulating evidence that life meaning is important in the context of living with a chronic, life-threatening illness. Further, coping--especially acceptance and religious coping--is related to increased life meaning over time in the context of life limiting illness.

GaAs optical parametric oscillator with circularly polarized and depolarized pump.

We demonstrate an optical parametric oscillator (OPO) based on GaAs pumped with linearly polarized and circularly polarized light and show that the relative OPO thresholds agree with theoretical expectations. For the circularly polarized pump, the threshold was as low as for the [111]-linearly polarized pump case. The pump was also passed through a Lyot depolarizer to produce pseudo-depolarized light, and the OPO threshold in this case was only 22% higher than that for [001]-linearly polarized pump.

Wire initiation critical for radiation symmetry in z-pinch-driven dynamic hohlraums.

Axial symmetry in x-ray radiation of wire-array z pinches is important for the creation of dynamic hohlraums used to compress inertial-confinement-fusion capsules. We present the first evidence that this symmetry is directly correlated with the magnitude of the negative radial electric field along the wire surface. This field (in turn) is inferred to control the initial energy deposition into the wire cores, as well as any current shorting to the return conductor.

Optical parametric generation of a mid-infrared continuum in orientation-patterned GaAs.

We have generated an ultrabroad mid-infrared continuum by using single-pass optical parametric generation (OPG) in orientation-patterned GaAs (OP-GaAs). The spectrum spans more than an octave, from 4.5 to 10.7 microm, measured 20 dB down from the peak. The 17.5 mm long, 0.5 mm thick, all-epitaxially-grown OP-GaAs sample with a 166.6-microm quasi-phase-matching period was pumped with 3.1-3.3 microm wavelength, 1 ps pulses up to 2 microJ in energy. The OPG threshold was observed at 55 nJ pump energy with the pump polarized along the [111] crystal direction. The slope efficiency near threshold was 51%, and the external conversion efficiency was as high as 15%.

High-power source of THz radiation based on orientation-patterned GaAs pumped by a fiber laser.

We demonstrate a new source of frequency-tunable THz wave packets based on parametric down-conversion process in orientation-patterned GaAs (OP-GaAs) that produces muW-level THz average powers at the repetition rate of 100 MHz. The OP-GaAs crystal is pumped by a compact all-fiber femtosecond laser operating at the wavelength of 2 mum. Such combination of fiber laser and OP-GaAs technologies promises a practical source of THz radiation which should be suitable for many applications including imaging and spectroscopy.

Demonstration of radiation pulse shaping with nested-tungsten-wire-array pinches for high-yield inertial confinement fusion.

Nested wire-array pinches are shown to generate soft x-ray radiation pulse shapes required for three-shock isentropic compression and hot-spot ignition of high-yield inertial confinement fusion capsules. We demonstrate a reproducible and tunable foot pulse (first shock) produced by interaction of the outer and inner arrays. A first-step pulse (second shock) is produced by inner array collision with a central CH2 foam target. Stagnation of the inner array at the axis produces the third shock. Capsules optimized for several of these shapes produce 290-900 MJ fusion yields in 1D simulations.

Direct experimental evidence for current-transfer mode operation of nested tungsten wire arrays at 16-19 MA.

Nested tungsten wire arrays (20-mm on 12-mm diam.) are shown for the first time to operate in a current-transfer mode at 16-19 MA, even for azimuthal interwire gaps of 0.2 mm that are the smallest typically used for any array experiment. After current transfer, the inner wire array shows discrete wire ablation and implosion characteristics identical to that of a single array, such as axially nonuniform ablation, delayed acceleration, and trailing mass and current. The presence of trailing mass from the outer and the inner arrays may play a role in determining nested array performance.

Characteristics and scaling of tungsten-wire-array z -pinch implosion dynamics at 20 MA.

We present observations for 20-MA wire-array z pinches of an extended wire ablation period of 57%+/-3% of the stagnation time of the array and non-thin-shell implosion trajectories. These experiments were performed with 20-mm-diam wire arrays used for the double- z -pinch inertial confinement fusion experiments [M. E. Cuneo, Phys. Rev. Lett. 88, 215004 (2002)] on the Z accelerator [R. B. Spielman, Phys. Plasmas 5, 2105 (1998)]. This array has the smallest wire-wire gaps typically used at 20 MA (209 microm ). The extended ablation period for this array indicates that two-dimensional (r-z) thin-shell implosion models that implicitly assume wire ablation and wire-to-wire merger into a shell on a rapid time scale compared to wire acceleration are fundamentally incorrect or incomplete for high-wire-number, massive (>2 mg/cm) , single, tungsten wire arrays. In contrast to earlier work where the wire array accelerated from its initial position at approximately 80% of the stagnation time, our results show that very late acceleration is not a universal aspect of wire array implosions. We also varied the ablation period between 46%+/-2% and 71%+/-3% of the stagnation time, for the first time, by scaling the array diameter between 40 mm (at a wire-wire gap of 524 mum ) and 12 mm (at a wire-wire gap of 209 microm ), at a constant stagnation time of 100+/-6 ns . The deviation of the wire-array trajectory from that of a thin shell scales inversely with the ablation rate per unit mass: f(m) proportional[dm(ablate)/dt]/m(array). The convergence ratio of the effective position of the current at peak x-ray power is approximately 3.6+/-0.6:1 , much less than the > or = 10:1 typically inferred from x-ray pinhole camera measurements of the brightest emitting regions on axis, at peak x-ray power. The trailing mass at the array edge early in the implosion appears to produce wings on the pinch mass profile at stagnation that reduces the rate of compression of the pinch. The observation of precursor pinch formation, trailing mass, and trailing current indicates that all the mass and current do not assemble simultaneously on axis. Precursor and trailing implosions appear to impact the efficiency of the conversion of current (driver energy) to x rays. An instability with the character of an m = 0 sausage grows rapidly on axis at stagnation, during the rise time of pinch power. Just after peak power, a mild m = 1 kink instability of the pinch occurs which is correlated with the higher compression ratio of the pinch after peak power and the decrease of the power pulse. Understanding these three-dimensional, discrete-wire implosion characteristics is critical in order to efficiently scale wire arrays to higher currents and powers for fusion applications.

Mass-profile and instability-growth measurements for 300-wire Z-pinch implosions driven by 14-18 MA.

We present the first comprehensive study of high wire-number, wire-array Z-pinch dynamics at 14-18 MA using x-ray backlighting and optical shadowgraphy diagnostics. The cylindrical arrays retain slowly expanding, dense wire cores at the initial position up to 60% of the total implosion time. Azimuthally correlated instabilities at the array edge appear during this stage which continue to grow in amplitude and wavelength after the start of bulk motion, resulting in measurable trailing mass that does not arrive on axis before peak x-ray emission.

X-ray emission from z pinches at 10 7 A: current scaling, gap closure, and shot-to-shot fluctuations.

We have measured the x-ray power and energy radiated by a tungsten-wire-array z pinch as a function of the peak pinch current and the width of the anode-cathode gap at the base of the pinch. The measurements were performed at 13- and 19-MA currents and 1-, 2-, 3-, and 4-mm gaps. The wire material, number of wires, wire-array diameter, wire-array length, wire-array-electrode design, normalized-pinch-current time history, implosion time, and diagnostic package were held constant for the experiments. To keep the implosion time constant, the mass of the array was increased as I2 (i.e., the diameter of each wire was increased as I), where I is the peak pinch current. At 19 MA, the mass of the 300-wire 20-mm-diam 10-mm-length array was 5.9 mg. For the configuration studied, we find that to eliminate the effects of gap closure on the radiated energy, the width of the gap must be increased approximately as I. For shots unaffected by gap closure, we find that the peak radiated x-ray power P(r) proportional to I1.24+/-0.18, the total radiated x-ray energy E(r) proportional to I1.73+/-0.18, the x-ray-power rise time tau(r) proportional to I0.39+/-0.34, and the x-ray-power pulse width tau(w) proportional to demonstrate that the internal energy and radiative opacity of the pinch are not responsible for the observed subquadratic power scaling. Heuristic wire-ablation arguments suggest that quadratic power scaling will be achieved if the implosion time tau(i) is scaled as I(-1/3). The measured 1sigma shot-to-shot fluctuations in P(r), E(r), tau(r), tau(w), and tau(i) are approximately 12%, 9%, 26%, 9%, and 2%, respectively, assuming that the fluctuations are independent of I. These variations are for one-half of the pinch. If the half observed radiates in a manner that is statistically independent of the other half, the variations are a factor of 2(1/2) less for the entire pinch. We calculate the effect that shot-to-shot fluctuations of a single pinch would have on the shot-success probability of the double-pinch inertial-confinement-fusion driver proposed by Hammer et al. [Phys. Plasmas 6, 2129 (1999)]. We find that on a given shot, the probability that two independent pinches would radiate the same peak power to within a factor of 1+/-alpha (where 0< or =alpha<<1) is equal to erf(alpha/2sigma), where sigma is the 1sigma fractional variation of the peak power radiated by a single pinch. Assuming alpha must be < or =7% to achieve adequate odd-Legendre-mode radiation symmetry for thermonuclear-fusion experiments, sigma must be <3% for the shot-success probability to be > or =90%. The observed (12/2(1/2))%=8.5% fluctuation in P(r) would provide adequate symmetry on 44% of the shots. We propose that three-dimensional radiative-magnetohydrodynamic simulations be performed to quantify the sensitivity of the x-ray emission to various initial conditions, and to determine whether an imploding z pinch is a spatiotemporal chaotic system.

Communicable disease case entry using PDAs and public wireless networks.

Concerns about detecting and responding to attacks with biowarfare agents have resulted in the development of deployable case reporting systems, e.g. RSVP. We implement a proof of concept web-based information system to be used securely from personal digital assistants over public wireless networks, by public health field workers for routine and emergent case reporting. The system collects data for a local health jurisdiction, provides content- and event-based notification, and forwards case reports to the Colorado State communicable disease reporting system (CEDRS). We believe this demonstrates a useful integration of portable and web-based technologies with public health practice.

National Pharmaceutical Stockpile drill analysis using XML data collection on wireless Java phones.

This study describes an informatics effort to track subjects through a National Pharmaceutical Stockpile (NPS) distribution drill. The drill took place in Seattle on 1/24/2002. Washington and the State Department of Health are among the first in the nation to stage a NPS drill testing the distribution of medications to mock patients, thereby testing the treatment capacity of the plan given a post-anthrax exposure scenario. The goal of the Public Health Informatics Group at the University of Washington (www.phig.washington.edu) was to use informatics approaches to monitor subject numbers and elapsed time. This study compares accuracy of time measurements using a mobile phone Java application to traditional paper recording in a live drill of the NPS. Pearson correlation = 1.0 in 2 of 3 stations. Differences in last station measurements can be explained by delay in recording of the exit time. We discuss development of the application itself and lessons learned. (MeSH Bioterrorism, Informatics, Public Health)