RESUMEN
Extractions methods based on ultrapure water, tetramethylammonium hydroxide (TMAH), and tetrasodium pyrophosphate (TSPP) were applied to faeces collected from two in vivo experiments of pigs and chickens fed with a silver-based nanomaterial to study the fate and speciation of silver. For TMAH extraction, cysteine and CaCl2 were used to evaluate their stabilization effect on the silver forms. The analytical techniques single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS), hydrodynamic chromatography hyphenated to ICP-MS (HDC-ICP-MS) and asymmetric flow field flow fractionation coupled to ICP-MS (AF4-ICP-MS) were applied to the simultaneous detection of particulate and dissolved silver. Results have shown that water extraction was a suitable option to assess the environmental release of silver, with percentages of 3 and 9% for faeces of pigs and chickens, respectively. The use of TMAH extraction combined with SP-ICP-MS analysis was useful to characterize Ag-containing particles (less than 1%). Both stabilizers, cysteine and CaCl2, have a similar effect on silver nanoparticle preservation for chicken faeces, whereas cysteine-Triton was better for pig samples. In any case, silver extraction efficiency with TMAH was low (39-42%) for both types of faeces due to a matrix effect. TSPP followed by ICP-MS enabled the fractionation of the silver in the faeces, with silver sulphide (41%) and ionic silver (62%) being the most abundant fractions.
Asunto(s)
Nanopartículas del Metal , Nanoestructuras , Animales , Porcinos , Cloruro de Calcio , Pollos , Cisteína , Plata , HecesRESUMEN
Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) is a technique widely used to obtain direct information about the number concentration and the size distribution of nanoparticles in liquid suspensions. However, its methods still lack clear quality control strategies to confirm the validity of the information derived from them. Only the detection of the complete size distribution of the nanoparticles in a sample over the size critical value ensures obtaining unbiased quantitative information, otherwise information should be restricted to report the presence of nanoparticles over a certain size and number concentration since their actual total number concentration is underestimated and the size overestimated. Under the latter conditions, data processing produces histograms showing the tails of the incomplete size distributions, although apparently, complete distributions can also be obtained when particle events are recorded as peaks, as reported here for the first time. The occurrence of these misleading situations must be critically evaluated for each SP-ICP-MS analysis. An approach, based on estimation of size critical values and successive dilutions, is proposed for the assessment of the validity of the quantitative information obtained, together with specific criteria for reconsidering the information that can be derived from those measurements. The approach was verified with different case studies and applied to the analysis of complex nanomaterials, confirming the validity of the reported information by comparison with other techniques. A calculation tool is also included to facilitate the estimation of size critical values under experimental conditions.
RESUMEN
Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) refers to the use of ICP-MS as a particle counting technique. When ICP-MS measurements are performed at very high data acquisition frequencies, information about (nano)particles containing specific elements and their dissolved forms can be obtained (element mass per particle, size and number and mass concentrations). As a result of its outstanding performance, SP-ICP-MS has become a relevant technique for the analysis of complex samples containing inorganic nanoparticles. This review discusses the maturity level achieved by the technique through the methods developed for the detection, characterisation and quantification of engineered and natural (nano)particles. The application of these methods in different analytical scenarios is comprehensively reviewed and critically discussed, with special attention to their current technical and metrological limitations. The emergent applications of SP-ICP-MS in the field of nanoparticle-tagged immunoassay and hybridization methods are also reviewed.
Asunto(s)
Nanopartículas , Espectrometría de Masas , Análisis EspectralRESUMEN
The use of a commercially available short length channel (14 cm length) is proposed to improve the efficiency associated to the separation by asymmetrical flow field-flow fractionation of particles in the nanometer range respect to a standard channel (27 cm length). The effect of channel length on elution times, separation efficiency and resolution have been studied. Polystyrene particles between 50 and 500 nm in size have been used to compare the behavior of both channels. Theoretical aspects based on the different contributions on particle diffusion inside the channel during the separation process have been considered to justify the results obtained. Non-equilibrium diffusion contribution to the efficiency has shown to be the most relevant aspect to be controlled during the separation. The increment of the field strength applied through the cross-flow velocityallows the reduction of diffusion while keep elution times constant. The use of the same cross-flow in a channel with a smaller area is the key factor that justifies the better efficiencies observed along the whole size range studied (improvements that reach factors up to 4.7 in experimental efficiency respect to the standard channel were achieved). The separation of polystyrene particles of 100 and 200 nm was achieved with a resolution of 1.20, whereas a 0.66 value was obtained with the standard channel at the same elution times. Channel recoveries have been also compared under optimized conditions to ensure that no side effects are produced, including the separation of mixtures of TiO2 nanoparticles. Similar or even better values were obtained with the short length channel, with recoveries higher than 85% for all the polystyrene particles tested and 75% recovery for the TiO2 nanoparticle mixture, which justifies its use for the separation of nanoparticles, providing better resolutions without compromise elution times or recoveries.
Asunto(s)
Técnicas de Química Analítica/métodos , Fraccionamiento de Campo-Flujo , Nanopartículas/química , Poliestirenos/aislamiento & purificación , Técnicas de Química Analítica/instrumentación , Difusión , Tamaño de la Partícula , Poliestirenos/químicaRESUMEN
A procedure for the size characterization and quantification of titanium dioxide (TiO2) nano- and microparticles by Asymmetric Flow Field-Flow Fractionation (AF4) coupled to Dynamic Light Scattering (DLS) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is described. Different strategies for size characterization with size standards and the use of the DLS signal for the estimation of hydrodynamic diameters are evaluated. The procedure has been applied to the characterization of TiO2 nanoparticles in photocatalytic products and crab sticks (surimis), where TiO2 is present as E171 food additive. Sizes in the range of 50-90 nm and 160-170 nm were estimated in the different photocatalytic products by AF4-DLS, in good agreement with the sizes predicted by calibration versus SiO2 and polystyrene standards. In surimis, sizes between 140 and 350 nm were estimated by AF4-DLS, similar to those reported in literature for E171 additive. These results were also compared to those obtained by single particle ICP-MS, which allowed the detection of a nano-sized fraction of TiO2 present in the four surimis analyzed. Titanium contents in one of the photocatalytic products determined by AF4-ICP-MS was 16.86 ± 2.54 mg g-1, whereas the alkaline extraction followed by AF4-ICP-MS allowed the determination of TiO2 content in four surimis at concentration levels in the range of the µg g-1 (from 3.14 ± 0.10 to 14.55 ± 1.46 µg Ti g-1), with channel recoveries above 85% in all cases. The method has been validated by comparison with the Ti content determined by ICP-OES after microwaved assisted acid digestion of all the samples. The methodology proposed allows the complete quantification of the (nano)particulate forms of titanium in complex matrices together with their size characterization.
Asunto(s)
Nanopartículas/análisis , Titanio/análisis , Dispersión Dinámica de Luz , Fraccionamiento de Campo-Flujo , Espectrometría de Masas , Tamaño de la PartículaRESUMEN
Mine wastes from abandoned exploitations are sources of high concentrations of hazardous metal(oid)s. Although these contaminants can be attenuated by sorbing to secondary minerals, in this work we identified a mechanism for long-distance dispersion of arsenic and metals through their association to mobile colloids. We characterize the colloids and their sorbed contaminants using spectrometric and physicochemical fractionation techniques. Mechanical action through erosion may release and transport high concentrations of colloid-associated metal(oid)s towards nearby stream waters, promoting their dispersion from the contamination source. Poorly crystalline ferrihydrite acts as the principal As-sorbing mineral, but in this study we find that this nanomineral does not mobilize As independently, rather, it is transported as surface coatings bound to mineral particles, perhaps through electrostatic biding interactions due to opposing surface charges at acidic to circumneutral pH values. This association is very stable and effective in carrying along metal(oid)s in concentrations above regulatory levels. The unlimited source of toxic elements in mine residues causes ongoing, decades-long mobilization of toxic elements into stream waters. The ferrihydrite-clay colloidal composites and their high mobility limit the attenuating role that iron oxides alone show through adsorption of metal(oid)s and their immobilization in situ. This may have important implications for the potential bioavailability of these contaminants, as well as for the use of this water for human consumption.
Asunto(s)
Silicatos de Aluminio/química , Arsénico/análisis , Contaminación Ambiental , Compuestos Férricos/química , Metales/análisis , Minería , Adsorción , Arsénico/química , Arcilla , Metales/química , Minerales/química , Ríos/químicaRESUMEN
The quality of the quantitative information in single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) depends directly on the number concentration of the nanoparticles in the sample analyzed, which is proportional to the flux of nanoparticles through the plasma. Particle number concentrations must be selected in accordance with the data acquisition frequency, to control the precision from counting statistics and the bias, which is produced by the occurrence of multiple-particle events recorded as single-particle events. With quadrupole mass spectrometers, the frequency of data acquisition is directly controlled by the dwell time. The effect of dwell times from milli- to microseconds (10 ms, 5 ms, 100 µs, and 50 µs) on the quality of the quantitative data has been studied. Working with dwell times in the millisecond range, precision figures about 5 % were achieved, whereas using microsecond dwell times, the suitable fluxes of nanoparticles are higher and precision was reduced down to 1 %; this was independent of the dwell time selected. Moreover, due to the lower occurrence of multiple-nanoparticle events, linear ranges are wider when dwell times equal to or shorter than 100 µs are used. A calculation tool is provided to determine the optimal concentration for any instrument or experimental conditions selected. On the other hand, the use of dwell times in the microsecond range reduces significantly the contribution of the background and/or the presence of dissolved species, in comparison with the use of millisecond dwell times. Although the use of dwell times equal to or shorter than 100 µs offers improved performance working in single-particle mode, the use of conventional dwell times (3-10 ms) should not be discarded, once their limitations are known.
RESUMEN
Detection and sizing of natural colloids involved in the release and transport of toxic metals and metalloids is essential to understand and model their environmental effects. Single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) was applied for the detection of arsenic-bearing particles released from mine wastes. Arsenic-bearing particles were detected in leachates from mine wastes, with a mass-per-particle detection limit of 0.64 ng of arsenic. Conversion of the mass-per-particle information provided by SP-ICP-MS into size information requires knowledge of the nature of the particles; therefore, synchrotron-based X-ray absorption spectroscopy (XAS) was used to identify scorodite (FeAsO4·2H2O) as the main species in the colloidal particles isolated by ultrafiltration. The size of the scorodite particles detected in the leachates was below 300-350 nm, in good agreement with the values obtained by TEM. The size of the particles detected by SP-ICP-MS was determined as the average edge of scorodite crystals, which show a rhombic dipyramidal form, achieving a size detection limit of 117 nm. The combined use of SP-ICP-MS and XAS allowed detection, identification, and size determination of scorodite particles released from mine wastes, suggesting their potential to transport arsenic. Graphical abstract Analytical approach for the detection and size characterization of As-bearing particles by SP-ICP-MS and XAS in environmental samples.
RESUMEN
The increasing demand of analytical information related to inorganic engineered nanomaterials requires the adaptation of existing techniques and methods, or the development of new ones. The challenge for the analytical sciences has been to consider the nanoparticles as a new sort of analytes, involving both chemical (composition, mass and number concentration) and physical information (e.g. size, shape, aggregation). Moreover, information about the species derived from the nanoparticles themselves and their transformations must also be supplied. Whereas techniques commonly used for nanoparticle characterization, such as light scattering techniques, show serious limitations when applied to complex samples, other well-established techniques, like electron microscopy and atomic spectrometry, can provide useful information in most cases. Furthermore, separation techniques, including flow field flow fractionation, capillary electrophoresis and hydrodynamic chromatography, are moving to the nano domain, mostly hyphenated to inductively coupled plasma mass spectrometry as element specific detector. Emerging techniques based on the detection of single nanoparticles by using ICP-MS, but also coulometry, are in their way to gain a position. Chemical sensors selective to nanoparticles are in their early stages, but they are very promising considering their portability and simplicity. Although the field is in continuous evolution, at this moment it is moving from proofs-of-concept in simple matrices to methods dealing with matrices of higher complexity and relevant analyte concentrations. To achieve this goal, sample preparation methods are essential to manage such complex situations. Apart from size fractionation methods, matrix digestion, extraction and concentration methods capable of preserving the nature of the nanoparticles are being developed. This review presents and discusses the state-of-the-art analytical techniques and sample preparation methods suitable for dealing with complex samples. Single- and multi-method approaches applied to solve the nanometrological challenges posed by a variety of stakeholders are also presented.
Asunto(s)
Compuestos Inorgánicos/análisis , Nanoestructuras , Espectrometría de Masas , Espectrofotometría AtómicaRESUMEN
Solubility is an important physicochemical parameter in nanoregulation. If nanomaterial is completely soluble, then from a risk assessment point of view, its disposal can be treated much in the same way as "ordinary" chemicals, which will simplify testing and characterisation regimes. This review assesses potential techniques for the measurement of nanomaterial solubility and evaluates the performance against a set of analytical criteria (based on satisfying the requirements as governed by the cosmetic regulation as well as the need to quantify the concentration of free (hydrated) ions). Our findings show that no universal method exists. A complementary approach is thus recommended, to comprise an atomic spectrometry-based method in conjunction with an electrochemical (or colorimetric) method. This article shows that although some techniques are more commonly used than others, a huge research gap remains, related with the need to ensure data reliability.
Asunto(s)
Técnicas de Química Analítica/métodos , Técnicas de Química Analítica/normas , Nanoestructuras/química , Métodos Analíticos de la Preparación de la Muestra/métodos , Colorimetría/métodos , Técnicas Electroquímicas/métodos , Modelos Teóricos , Reproducibilidad de los Resultados , Solubilidad , Espectrofotometría AtómicaRESUMEN
Scorodite-rich wastes left as a legacy of mining and smelting operations pose a threat to environmental health. Colloids formed by the weathering of processing wastes may control the release of arsenic (As) into surface waters. At a former mine site in Madrid (Spain), we investigated the mobilization of colloidal As by surface runoff from weathered processing wastes and from sediments in the bed of a draining creek and a downstream sedimentation-pond. Colloids mobilized by surface runoff during simulated rain events were characterized for their composition, structure and mode of As uptake using asymmetric flow field-flow fractionation coupled to inductively plasma mass spectrometry (AF4-ICP-MS) and X-ray absorption spectroscopy (XAS) at the As and Fe K-edges. Colloidal scorodite mobilized in surface runoff from the waste pile is acting as a mobile As carrier. In surface runoff from the river bed and the sedimentation pond, ferrihydrite was identified as the dominant As-bearing colloidal phase. The results from this study suggest that mobilization of As-bearing colloids by surface runoff may play an important role in the dispersion of As from metallurgical wastes deposited above ground and needs to be considered in risk assessment.
Asunto(s)
Arsenicales/análisis , Coloides/química , Minería , Contaminantes del Suelo/análisis , Suelo/química , Contaminantes Químicos del Agua/análisis , Compuestos Férricos/química , Nanopartículas/química , Lluvia/química , Ríos/química , España , Propiedades de Superficie , Espectroscopía de Absorción de Rayos XRESUMEN
Arsenic and iron speciation in the dispersible colloid fraction (DCF; 10-1000 nm) from an As-rich mine waste pile, sediments of a streambed that collects runoff from waste pile, the streambed subsoil, and the sediments of a downstream pond were investigated by combining asymmetrical-flow field-flow fractionation (AsFlFFF)/inductively-coupled plasma-mass spectrometry (ICP-MS), transmission electron microscopy (TEM) and X-ray absorption (XAS) spectroscopy. Calcium, Fe and As (Fe/As molar ratio â¼ 1) were the main components of the DCF from waste pile. TEM/EDS and As and Fe XAS analysis revealed the presence of nanoparticle scorodite in this same DCF, as well as Fe nanoparticles in all samples downstream of the waste pile. Arsenic and Fe XAS showed As(V) adsorbed onto nanoparticulate ferrihydrite in the DCF of downstream samples. Micro-X-ray fluorescence indicated a strong correlation between Fe and As in phyllosilicate/Fe(3+) (oxi) hydroxide aggregates from the sediment pond. Fractionation analysis showed the mean particle size of the DCF from the streambed sample to be smaller than that of the streambed subsoil and sediment ponds samples. These results show that an important and variable fraction of As may be bound to dispersible colloids that can be released from contaminated soils and transported downstream in natural systems.
Asunto(s)
Arsénico/análisis , Coloides/química , Contaminantes del Suelo/análisis , Arsenicales/análisis , Geografía , Concentración de Iones de Hidrógeno , Hierro/análisis , Microscopía Electrónica de Transmisión , Minería , Nanopartículas/química , Tamaño de la Partícula , Suelo/química , España , Espectroscopía de Absorción de Rayos XRESUMEN
A comprehensive study of the bioavailability of orally administered silver nanoparticles (AgNPs) was carried out using a rat model. The silver uptake was monitored in liver and kidney tissues, as well as in urine and in feces. Significant accumulation of silver was found in both organs, the liver being the principal target of AgNPs. A significant (â¼50%) fraction of silver was found in feces whereas the fraction excreted via urine was negligible (< 0.01%). Intact silver nanoparticles were found in feces by asymmetric flow field-flow fractionation (AsFlFFF) coupled with UV-Vis analysis. Laser ablation-ICP MS imaging showed that AgNPs were able to penetrate into the liver, in contrast to kidneys where they were retained in the cortex. Silver speciation analysis in cytosols from kidneys showed the metallothionein complex as the major species whereas in the liver the majority of silver was bound to high-molecular (70-25 kDa) proteins. These findings demonstrate the presence of Ag(i), released by the oxidation of AgNPs in the biological environment.
Asunto(s)
Nanopartículas del Metal/análisis , Plata/análisis , Plata/farmacocinética , Administración Oral , Animales , Disponibilidad Biológica , Heces/química , Riñón/química , Hígado/química , Masculino , Nanopartículas del Metal/administración & dosificación , Ratas , Ratas Sprague-Dawley , Plata/administración & dosificaciónRESUMEN
Single particle inductively coupled plasma mass spectrometry is an emergent ICPMS method for detecting, characterizing, and quantifying nanoparticles. Although the number of applications reported to date is limited, the relatively simple instrumental requirements, the low number concentration detection levels attainable, and the possibility to detect both the presence of dissolved and particulate forms of an element make this methodology very promising in the nanoscience related areas.
RESUMEN
High performance size-exclusion chromatography (HP-SEC) with UV absorption for organic matter detection and inductively coupled plasma mass spectrometry (ICP-MS) for elemental detection have been used to study the mobilization of metals from compost as a function of pH and the molecular mass of their complexes with dissolved organic matter (DOM). Due to its heterogeneous nature, organic matter mobilized from compost shows a continuous distribution of molecular masses in the range studied (up to 80kDa). In order to differentiate between the contribution of humic and fulvic acids (FA) to the organic matter mobilized in the pH range 5-10, their UV absorption chromatographic profiles have been deconvoluted with respect to the adjusted gaussian profiles of the humic and fulvic acids isolated from compost. Results show a preponderant contribution of fulvic acids at low pH values and an increasing percentage of humic acids (HA) mobilized at basic pH (up to 49% of total DOM at pH 10). A similar deconvolution procedure has been applied to the ICP-MS chromatograms of selected metals (Co, Cu, Pb and Bi). In general, both fulvic and humic acids contribute to the mobilization of divalent transition metals, such as copper or cobalt, whereas bismuth or lead are preferably associated to humic acids. Non-humic substances (HS) also contribute to the mobilization of cations, especially at acidic pHs. These conclusions have been extended to different elements based on deconvolution analysis results at pH 7.
Asunto(s)
Benzopiranos/análisis , Cromatografía en Gel/métodos , Sustancias Húmicas/análisis , Espectrometría de Masas/métodos , Metales/análisis , Espectrofotometría/métodos , Rayos Ultravioleta , Benzopiranos/química , Concentración de Iones de Hidrógeno , Metales/químicaRESUMEN
An integral approach to study the mobility of chromium in compost is presented. The approach is based on batch pH dependence leaching tests and the analysis of the leachates for total chromium, chromium(VI) and complexes of chromium(III) with natural organic matter. As leachings are performed with no aggressive reagents (ultrapure water with added nitric acid or potassium hydroxide), the method can be considered a good approach to simulate natural scenarios. The analysis of leachates is complemented with the determination of total chromium and total Cr(VI) in the solid sample. Speciation analysis are done by high performance liquid chromatography with inductively coupled plasma mass spectrometry as detection technique; Cr(VI) is determined by ion chromatography, whereas Cr(III) complexes with natural organic matter by size exclusion chromatography. In the compost studied, Cr(VI) accounted for 6% of the total chromium in the solid, whereas no significant amounts of Cr(VI) were mobilized in the pH range studied (4-10). Chromium is mobilized as Cr(III) bound to organic matter, both to humic and fulvic acids, with an increasing contribution of humic acids at higher pHs.
Asunto(s)
Cromo/análisis , Cromo/química , Suelo/análisis , Benzopiranos/análisis , Benzopiranos/química , Sustancias Húmicas/análisis , Concentración de Iones de Hidrógeno , Peso Molecular , Contaminantes Químicos del Agua/análisisRESUMEN
Electrochemical hydride generation (EC-HG) has been proposed as a valid alternative to chemical generation as a sample-introduction technique in atomic spectrometry. In this review fundamental aspects of the technique are revised, including designs of electrolytic cells, mechanisms of the generation process, and interferences caused by the presence of different species. Special attention is paid to the role of the configuration of the cathodes and their materials on the efficiency of hydride generation and on interferences from concomitant species. An overview of the application of EC-HG to the analysis of real samples is also given.
RESUMEN
A flow injection system for the determination of selenium by electrochemical hydride generation and quartz tube atomic absorption spectrometry is described. The generator consists of an electrolytic flow-through cell with a concentric arrangement and a packed cathode made of particulated lead. The influences of sample flow rate, carrier gas flow rate and electrolysis current on the hydrogen selenide generation have been critically studied. Both sample flow rate and electrolysis current play important roles in the efficiency of the hydride generation process. A characteristic mass of 2.4 ng and a concentration detection limit of 17 microg l(-1) were obtained for a sample volume of 420 microl.