RESUMEN
We describe the preparation of nanocomposites which exhibit dichroism in the near infrared region (NIR). These materials consist of crosslinked poly(dimethylsiloxane) (PDMS) and gold nanoparticles, coated with 1-dodecanethiol or tert-tetradecanethiol. The alkanethiols improve dispersibility of the gold particles, and accordingly composites were manufactured by diffusion of the particles into swollen self-supporting PDMS elastomer films. After drying, the films were exposed to solvents for one minute, stretched in wet state, dried again and annealed. This procedure led to formation of oriented linear gold particle assemblies within stretched polymer. If the aspect ratio of the particle assemblies is high, the absorption of polarized light in the NIR region is expected to depend on the angle between the polarization plane and the orientation direction of the particle assemblies, and this was observed to be the case.
RESUMEN
Although strong and stiff human-made composites have long been developed, the microstructure of today's most advanced composites has yet to achieve the order and sophisticated hierarchy of hybrid materials built up by living organisms in nature. Clay-based nanocomposites with layered structure can reach notable stiffness and strength, but these properties are usually not accompanied by the ductility and flaw tolerance found in the structures generated by natural hybrid materials. By using principles found in natural composites, we showed that layered hybrid films combining high tensile strength and ductile behavior can be obtained through the bottom-up colloidal assembly of strong submicrometer-thick ceramic platelets within a ductile polymer matrix.