Development of an augmented reality system for tracheal intubation guidance of airway management.

Tracheal intubation is a crucial procedure performed in airway management to sustain life during various procedures. However, difficult airways can make intubation challenging, which is associated with increased mortality and morbidity. This is particularly important for children who undergo intubation where the situation is difficult. Improved airway management will decrease incidences of repeated attempts, decrease hypoxic injuries in patients, and decrease hospital stays, resulting in better clinical outcomes and reduced costs. Currently, 3D printed models based on CT scans and ultrasound-guided intubation are being used or tested for device fitting and procedure guidance to increase the success rate of intubation, but both have limitations. Maintaining a 3D printing facility can be logistically inconvenient, and it can be time consuming and expensive. Ultrasound-guided intubation can be hindered by operator dependence, limited two-dimensional visualization, and potential artifacts. In this study, we developed an augmented reality (AR) system that allows the overlay of intubation tools and internal airways, providing real-time guidance during the procedure. A child manikin was used to develop and test the AR system. Three-dimensional CT images were acquired from the manikin. Different tissues were segmented to generate the 3D models that were imported into Unity to build the holograms. Phantom experiments demonstrated the AR-guided system for potential applications in tracheal intubation guidance.

Mapping nanoscale carrier confinement in polycrystalline graphene by terahertz spectroscopy.

Terahertz time-domain spectroscopy (THz-TDS) can be used to map spatial variations in electrical properties such as sheet conductivity, carrier density, and carrier mobility in graphene. Here, we consider wafer-scale graphene grown on germanium by chemical vapor deposition with non-uniformities and small domains due to reconstructions of the substrate during growth. The THz conductivity spectrum matches the predictions of the phenomenological Drude-Smith model for conductors with non-isotropic scattering caused by backscattering from boundaries and line defects. We compare the charge carrier mean free path determined by THz-TDS with the average defect distance assessed by Raman spectroscopy, and the grain boundary dimensions as determined by transmission electron microscopy. The results indicate that even small angle orientation variations below 5° within graphene grains influence the scattering behavior, consistent with significant backscattering contributions from grain boundaries.

The success of publicly funded rotavirus vaccine programs for preventing community- and hospital-acquired rotavirus infections in Canadian pediatric hospitals: an observational study.

BACKGROUND: Canadian immunization programs for rotavirus started in 2011. We sought to determine their effect on the burden of community-acquired admissions and hospital-acquired rotavirus at pediatric hospitals. METHODS: The Canadian Immunization Monitoring Program Active (IMPACT) network conducted active surveillance for rotavirus-positive hospital admissions between 2005 and 2020 at 12 pediatric hospitals. We used yearly rates of community-acquired rotavirus per 10 000 admissions and hospital-acquired rotavirus infections per 1000 patient-days to determine changes in the pre- and post-vaccine program periods. RESULTS: During the 15-year study period, 5691 rotavirus hospital admissions and hospital-acquired infections were detected, including 4323 (76%) community-acquired infections and 1368 (24%) hospital-acquired infections. The average community-acquired rate in the pre-vaccine period was 60.3 (95% confidence interval [CI] 53.7-68.3) per 10 000 admissions, with a decline to 11.0 (95% CI 7.5-15.1) per 10 000 admissions in the post-vaccine period, resulting in an average reduction of 81.7% (95% CI 74.4%-87.8%). The rate of hospital-acquired rotavirus declined from 0.35 (95% CI 0.29-0.41) per 1000 patient-days in the pre-vaccine period to 0.05 (95% CI 0.03-0.07) per 1000 patient-days in the post-vaccine period, resulting in an 85.3% (95% CI 77.7%-91.9%) average decline. Herd protection was present among children aged 2-16 years. INTERPRETATION: Although start dates of rotavirus vaccine programs across provinces varied, there was around an 80% average decrease in both community-acquired and hospital-acquired rotavirus infections at pediatric hospitals in Canada in the 1- to 9-year interval after implementation of rotavirus vaccine programs. Herd protection is an important aspect of rotavirus vaccines for other children who are not vaccine eligible, and rotavirus vaccines continue to provide important benefits both for children and health care systems.

Congenital Cystic Neck Masses.

Congenital cystic masses are commonly encountered when imaging a patient presenting with a neck mass. Congenital cysts are present at birth; however, these cysts may not present until later in life with some growing slowly and others rapidly increasing in size due to hemorrhage of infection. A neonatal presentation is rare but when present may allow a narrower differential diagnosis. Imaging plays a significant role in defining a lesion as cystic, assessing location, and directing the next step in evaluation and or intervention.

Imaging Guide to Inner Ear Malformations: An Illustrative Review.

Inner ear malformation (IEM) with associated sensoryneural hearing loss (SNHL) is a major cause of childhood disability. Computed tomography (CT) and magnetic resonance imaging (MRI) imaging play important and often complementary roles in diagnosing underlying structural abnormalities and surgical planning allows for direct visualization of the cochlear nerve and is the preferred imaging modality prior to cochlear implantation. CT is helpful to assess osseous anatomy and when evaluating children with mixed hearing loss or syndromic associations. When reviewing these cases, it is important for the radiologist to be familiar with the key imaging features. In this article, we will present the imaging findings associated with different inner ear malformations associated with congenital sensorineural hearing loss.

Establishing language laterality: does resting-state functional MRI help?

OBJECTIVE: Task-based functional MRI (tb-fMRI) is now considered the standard, noninvasive technique in establishing language laterality in children for surgical planning. The evaluation can be limited due to several factors such as age, language barriers, and developmental and cognitive delays. Resting-state functional MRI (rs-fMRI) offers a potential path to establish language dominance without active task participation. The authors sought to compare the ability of rs-fMRI for language lateralization in the pediatric population with conventional tb-fMRI used as the gold standard. METHODS: The authors performed a retrospective evaluation of all pediatric patients at a dedicated quaternary pediatric hospital who underwent tb-fMRI and rs-fMRI from 2019 to 2021 as part of the surgical workup for patients with seizures and brain tumors. Task-based fMRI language laterality was based on a patient's adequate performance on one or more of the following: sentence completion, verb generation, antonym generation, or passive listening tasks. Resting-state fMRI data were postprocessed using statistical parametric mapping, FMRIB Software Library, and FreeSurfer as described in the literature. The laterality index (LI) was calculated from the independent component (IC) with the highest Jaccard Index (JI) for the language mask. Additionally, the authors visually inspected the activation maps for two ICs with the highest JIs. The rs-fMRI LI of IC1 and the authors' image-based subjective interpretation of language lateralization were compared with tb-fMRI, which was considered the gold standard for this study. RESULTS: A retrospective search yielded 33 patients with language fMRI data. Eight patients were excluded (5 with suboptimal tb-fMRI and 3 with suboptimal rs-fMRI data). Twenty-five patients (age range 7-19 years, male/female ratio 15:10) were included in the study. The language laterality concordance between tb-fMRI and rs-fMRI ranged from 68% to 80% for assessment based on LI of independent component analysis with highest JI and for subjective evaluation by visual inspection of activation maps, respectively. CONCLUSIONS: The concordance rates between tb-fMRI and rs-fMRI of 68% to 80% show the limitation of rs-fMRI in determining language dominance. Resting-state fMRI should not be used as the sole method for language lateralization in clinical practice.

Evaluation of the performance of multiple immunoassay diagnostic platforms on the National Microbiology Laboratory SARS-CoV-2 National Serology Panel.

BACKGROUND: Serological assays designed to detect SARS-CoV-2 antibodies are being used in serological surveys and other specialized applications. As a result, and to ensure that the outcomes of serological testing meet high quality standards, evaluations are required to assess the performance of these assays and the proficiency of laboratories performing them. METHODS: A panel of 60 plasma/serum samples from blood donors who had reverse transcriptase-polymerase chain reaction (RT-PCR) confirmed SARS-CoV-2 infections and 21 SARS-CoV-2 negative samples were secured and distributed to interested laboratories within Canada (n = 30) and the United States (n = 1). Participating laboratories were asked to provide details on the diagnostic assays used, the platforms the assays were performed on, and the results obtained for each panel sample. Laboratories were blinded with respect to the expected outcomes. RESULTS: The performance of the different assays evaluated was excellent, with the high-throughput platforms of Roche, Ortho, and Siemens demonstrating 100% sensitivity. Most other high-throughput platforms had sensitivities of >93%, with the exception of the IgG assay using the Abbott ARCHITECT which had an average sensitivity of only 87%. The majority of the high-throughput platforms also demonstrated very good specificities (>97%). CONCLUSION: This proficiency study demonstrates that most of the SARS-CoV-2 serological assays utilized by provincial public health or hospital laboratories in Canada have acceptable sensitivity and excellent specificity.

HISTORIQUE: Les dosages sérologiques conçus pour dépister les anticorps anti-SRAS-CoV-2 sont utilisés dans les études sérologiques et d'autres applications spécialisées. Par conséquent, et pour s'assurer que leurs résultats respectent des normes de qualité, il faut procéder à des évaluations de leur performance et de la compétence des laboratoires à les effectuer. MÉTHODOLOGIE: Les chercheurs ont obtenu une batterie de 60 prélèvements de plasma et de sérum chez des donneurs dont l'amplification en chaîne par polymérase après transcription inverse (RT-PCR) avait confirmé des infections par le SRAS-CoV-2 et de 21 prélèvements dont les résultats étaient négatifs au SRAS-CoV-2 et les ont distribués aux laboratoires intéressés du Canada (n = 30) et des États-Unis (n = 1). Ils ont invité les laboratoires participants à fournir de l'information détaillée sur les dosages diagnostiques utilisés, les plateformes sur lesquelles les dosages étaient exécutés et les résultats obtenus pour chaque échantillon. Les chercheurs ont demandé aux laboratoires participants de fournir de l'information détaillée sur les dosages diagnostiques utilisés, les plateformes sur lesquelles les dosages ont été effectués, et les résultats obtenus à l'égard de chaque échantillon. Les laboratoires ont mené les études à l'insu des résultats escomptés. RÉSULTATS: Les divers dosages avaient une excellente exécution, les plateformes à haut débit de Roche, d'Ortho et de Siemens démontrant une sensibilité de 100 %. La plupart des autres plateformes à haut débit avaient des sensibilités de plus de 93 %, à l'exception des dosages des IgG faisant appel à l'analyseur ARCHITECT d'Abbott, dont la sensibilité moyenne était de seulement 87 %. La majorité des plateformes à haut débit avaient également une très bonne spécificité (plus de 97 %). CONCLUSION: La présente étude de compétence démontre que la plupart des dosages sérologiques du SRAS-CoV-2 évalués dans des laboratoires sanitaires provinciaux ou les laboratoires hospitaliers du Canada possèdent une sensibilité acceptable et une excellente spécificité.

A cross-sectional natural history study of aspartylglucosaminuria.

Aspartylglucosaminuria (AGU) is a rare lysosomal storage disorder that causes stagnation of development in adolescence and neurodegeneration in early adulthood. Precision therapies, including gene transfer therapy, are in development with a goal of taking advantage of the slow clinical course. Understanding of disease natural history and identification of disease-relevant biomarkers are important steps in clinical trial readiness. We describe the clinical features of a diverse population of patients with AGU, including potential imaging and electrophysiological biomarkers. This is a single-center, cross-sectional study of the clinical, neuropsychological, electrophysiological, and imaging characteristics of AGU. A comprehensive assessment of eight participants (5 Non-Finnish) revealed a mean non-verbal IQ (NVIQ) of 70.25 ± 10.33 which decreased with age (rs = -0.85, p = 0.008). All participants demonstrated deficits in communication and gross/fine motor dysfunction. Auditory and visual evoked potentials demonstrated abnormalities in one or both modalities in 7 of 8 subjects, suggesting sensory pathway dysfunction. Brain imaging demonstrated T2 FLAIR hypointensity in the pulvinar nuclei and cerebral atrophy, as previously shown in the Finnish AGU population. Magnetic resonance spectroscopy (MRS) showed a 5.1 ppm peak corresponding to the toxic substrate (GlcNAc-Asn), which accumulates in AGU. Our results showed there was no significant difference between Finnish and Non-Finnish patients, and performance on standardized cognitive and motor testing was similar to prior studies. Age-related changes on functional assessments and disease-relevant abnormalities on surrogate biomarkers, such as MRS, could be used as outcome measures in a clinical trial.

Chemical Vapor-Deposited Graphene on Ultraflat Copper Foils for van der Waals Hetero-Assembly.

The purity and morphology of the copper surface is important for the synthesis of high-quality, large-grained graphene by chemical vapor deposition. We find that atomically smooth copper foils-fabricated by physical vapor deposition and subsequent electroplating of copper on silicon wafer templates-exhibit strongly reduced surface roughness after the annealing of the copper catalyst, and correspondingly lower nucleation and defect density of the graphene film, when compared to commercial cold-rolled copper foils. The "ultrafoils"-ultraflat foils-facilitate easier dry pickup and encapsulation of graphene by hexagonal boron nitride, which we believe is due to the lower roughness of the catalyst surface promoting a conformal interface and subsequent stronger van der Waals adhesion between graphene and hexagonal boron nitride.

Stacking and Twisting of Freestanding Complex Oxide Thin Films.

The integration of dissimilar materials in heterostructures has long been a cornerstone of modern materials science-seminal examples are 2D materials and van der Waals heterostructures. Recently, new methods have been developed that enable the realization of ultrathin freestanding oxide films approaching the 2D limit. Oxides offer new degrees of freedom, due to the strong electronic interactions, especially the 3d orbital electrons, which give rise to rich exotic phases. Inspired by this progress, a new platform for assembling freestanding oxide thin films with different materials and orientations into artificial stacks with heterointerfaces is developed. It is shown that the oxide stacks can be tailored by controlling the stacking sequences, as well as the twist angle between the constituent layers with atomically sharp interfaces, leading to distinct moiré patterns in the transmission electron microscopy images of the full stacks. Stacking and twisting is recognized as a key degree of structural freedom in 2D materials but, until now, has never been realized for oxide materials. This approach opens unexplored avenues for fabricating artificial 3D oxide stacking heterostructures with freestanding membranes across a broad range of complex oxide crystal structures with functionalities not available in conventional 2D materials.

Applying fluorescent dye assays to discriminate Escherichia coli chlorhexidine resistance phenotypes from porin and mlaA deletions and efflux pumps.

Bacterial resistance to the antiseptic chlorhexidine (CHX), is a growing problem, recently shown to be caused by deleterious mutations to the phospholipid transport system component (mlaA) as well as efflux pump overexpression. Comparisons of CHX resistance mechanisms, such as porin deletions (ompCF), and over-expressed efflux pumps (acrB, qacE, aceI), are lacking and may be distinguishable using antiseptic rapid fluorescent dye testing assays. Using E. coli K-12 CHX adapted isolates (CHXR1), gene deletion mutants, and over-expressed transformants the phenotypes of these CHX resistance genes were compared using antimicrobial susceptibility tests (AST), rapid fluorescent propidium iodide dye-based membrane integrity assays (RFDMIA), and scanning electron microscopy (SEM). AST findings showed CHXR1, ΔacrB, ΔompCF, and transformants pCA24N-aceI and pCA24N-mlaA conferred greater (two to fourfold) MIC changes when compared to matched controls. Examination of these mutants/transformants using CHX RFDMIA showed that porin dual-deletions (ΔompCF) and mlaA alterations (ΔmlaA; pCA24N-mlaA, CHXR1) were distinguishable from controls. Results for over-expressed (pMS119EH-aceI) and deleted (ΔacrB) efflux pump RFDMIA could not be distinguished with propidium iodide, only with ethidium bromide, suggesting propidium iodide is better suited for detecting porin and mlaA associated CHX resistance mechanisms. SEM of CHXR1 and unadapted E. coli cells exposed to increasing CHX concentrations revealed that CHX does not visibly damage cell envelope integrity at any tested concentration but did identify elongated CHXR1 cells. ΔmlaA confers similar levels of CHX resistance as efflux overexpression and porin deletions, however, only outer membrane-altering porin and mlaA deletions can be reliably distinguished using RFDMIA.

A Cheek Mass in a 5-Year-Old Child.

OBJECTIVES: To describe the management of a 5-year old female with a painless, mobile cheek mass. METHODS: A retrospective chart review of presentation, imaging, pathology and management. RESULTS: Magnetic resonance imaging showed a heterogenous mass with solid and lipomatous components. The mass was a lipoblastoma on histopathology and was excised completely with no evidence of recurrence. CONCLUSIONS: The diagnosis and management of a cheek mass in a child is challenging. Imaging is important but not diagnostic. Surgical excision is the primary management of a lipoblastoma.

Long-term stability and tree-ring oxidation of WSe2 using phase-contrast AFM.

In this work, we use atomic force microscopy (AFM) to investigate the long-term evolution of oxidative defects of tungsten diselenide (WSe2) in ambient conditions over a period of 75 months, which is the longest such study performed on any layered material. In particular, we find that phase-imaging AFM of mechanically exfoliated WSe2 crystals provides convenient, direct identification of exposed and covered step-edges, and together with topographic thickness measurements allows complete determination of the layer arrangement in a multilayer flake. Step-edges with low or no phase-contrast consistently exhibit long-term stability in ambient conditions, indicating that they are covered and effectively protected by above-lying WSe2 layers. On the contrary, step-edges with initial high phase-contrast are clearly degraded after medium- to long-term exposure to ambient conditions (up to six months), indicating that these are not covered by other layers. Similar behaviour was observed for MoTe2 and MoS2. The correlation between phase-contrast and step order was confirmed by cross-sectional transmission electron microscopy. By comparing the phase-contrast line-traces in different locations and at different times, we find that long-term storage in ambient conditions led to evolution of a distinct ring-like pattern resembling the tree-lines arising from seasonal changes. Indeed the phase-contrast showed correlation with the average amount of sun-hours registered at the storage location. Storage in darkness slowed down the evolution of the tree-ring lines, in accordance with this explanation. Our work provides a unique dataset on long-term degradation of one of the most stable transition metal dichalcogenides, as well as insights into the conditions causing acceleration or inhibition of the degradation process.

Super-Resolution Nanolithography of Two-Dimensional Materials by Anisotropic Etching.

Nanostructuring allows altering of the electronic and photonic properties of two-dimensional (2D) materials. The efficiency, flexibility, and convenience of top-down lithography processes are, however, compromised by nanometer-scale edge roughness and resolution variability issues, which especially affect the performance of 2D materials. Here, we study how dry anisotropic etching of multilayer 2D materials with sulfur hexafluoride (SF6) may overcome some of these issues, showing results for hexagonal boron nitride (hBN), tungsten disulfide (WS2), tungsten diselenide (WSe2), molybdenum disulfide (MoS2), and molybdenum ditelluride (MoTe2). Scanning electron microscopy and transmission electron microscopy reveal that etching leads to anisotropic hexagonal features in the studied transition metal dichalcogenides, with the relative degree of anisotropy ranked as: WS2 > WSe2 > MoTe2 ∼ MoS2. Etched holes are terminated by zigzag edges while etched dots (protrusions) are terminated by armchair edges. This can be explained by Wulff constructions, taking the relative stabilities of the edges and the AA' stacking order into account. Patterns in WS2 are transferred to an underlying graphite layer, demonstrating a possible use for creating sub-10 nm features. In contrast, multilayer hBN exhibits no lateral anisotropy but shows consistent vertical etch angles, independent of crystal orientation. Using an hBN crystal as the base, ultrasharp corners can be created in lithographic patterns, which are then transferred to a graphite crystal underneath. We find that the anisotropic SF6 reactive ion etching process makes it possible to downsize nanostructures and obtain smooth edges, sharp corners, and feature sizes significantly below the resolution limit of electron beam lithography. The nanostructured 2D materials can be used themselves or as etch masks to pattern other nanomaterials.

Children's Oncology Group Phase III Trial of Reduced-Dose and Reduced-Volume Radiotherapy With Chemotherapy for Newly Diagnosed Average-Risk Medulloblastoma.

PURPOSE: Children with average-risk medulloblastoma (MB) experience survival rates of ≥ 80% at the expense of adverse consequences of treatment. Efforts to mitigate these effects include deintensification of craniospinal irradiation (CSI) dose and volume. METHODS: ACNS0331 (ClinicalTrials.gov identifier: NCT00085735) randomly assigned patients age 3-21 years with average-risk MB to receive posterior fossa radiation therapy (PFRT) or involved field radiation therapy (IFRT) following CSI. Young children (3-7 years) were also randomly assigned to receive standard-dose CSI (SDCSI; 23.4 Gy) or low-dose CSI (LDCSI; 18 Gy). Post hoc molecular classification and mutational analysis contextualized outcomes according to known biologic subgroups (Wingless, Sonic Hedgehog, group 3, and group 4) and genetic biomarkers. Neurocognitive changes and ototoxicity were monitored over time. RESULTS: Five hundred forty-nine patients were enrolled on study, of which 464 were eligible and evaluable to compare PFRT versus IFRT and 226 for SDCSI versus LDCSI. The five-year event-free survival (EFS) was 82.5% (95% CI, 77.2 to 87.8) and 80.5% (95% CI, 75.2 to 85.8) for the IFRT and PFRT regimens, respectively, and 71.4% (95% CI, 62.8 to 80) and 82.9% (95% CI, 75.6 to 90.2) for the LDCSI and SDCSI regimens, respectively. IFRT was not inferior to PFRT (hazard ratio, 0.97; 94% upper CI, 1.32). LDCSI was inferior to SDCSI (hazard ratio, 1.67%; 80% upper CI, 2.10). Improved EFS was observed in patients with Sonic Hedgehog MB who were randomly assigned to the IFRT arm (P = .018). Patients with group 4 MB receiving LDCSI exhibited inferior EFS (P = .047). Children receiving SDCSI exhibited greater late declines in IQ (estimate = 5.87; P = .021). CONCLUSION: Reducing the radiation boost volume in average-risk MB is safe and does not compromise survival. Reducing CSI dose in young children with average-risk MB results in inferior outcomes, possibly in a subgroup-dependent manner, but is associated with better neurocognitive outcome. Molecularly informed patient selection warrants further exploration for children with MB to be considered for late-effect sparing approaches.

Phenotypic and Multi-Omics Characterization of Escherichia coli K-12 Adapted to Chlorhexidine Identifies the Role of MlaA and Other Cell Envelope Alterations Regulated by Stress Inducible Pathways in CHX Resistance.

Chlorhexidine (CHX) is an essential medicine used as a topical antiseptic in skin and oral healthcare treatments. The widespread use of CHX has increased concerns regarding the development of antiseptic resistance in Enterobacteria and its potential impact on cross-resistance to other antimicrobials. Similar to other cationic antiseptics, resistance to CHX is believed to be driven by three membrane-based mechanisms: lipid synthesis/transport, altered porin expression, and increased efflux pump activity; however, specific gene and protein alterations associated with CHX resistance remain unclear. Here, we adapted Escherichia coli K-12 BW25113 to increasing concentrations of CHX to determine what phenotypic, morphological, genomic, transcriptomic, and proteomic changes occurred. We found that CHX-adapted E. coli isolates possessed no cross-resistance to any other antimicrobials we tested. Scanning electron microscopy imaging revealed that CHX adaptation significantly altered mean cell widths and lengths. Proteomic analyses identified changes in the abundance of porin OmpF, lipid synthesis/transporter MlaA, and efflux pump MdfA. Proteomic and transcriptomic analyses identified that CHX adaptation altered E. coli transcripts and proteins controlling acid resistance (gadE, cdaR) and antimicrobial stress-inducible pathways Mar-Sox-Rob, stringent response systems. Whole genome sequencing analyses revealed that all CHX-resistant isolates had single nucleotide variants in the retrograde lipid transporter gene mlaA as well as the yghQ gene associated with lipid A transport and synthesis. CHX resistant phenotypes were reversible only when complemented with a functional copy of the mlaA gene. Our results highlight the importance of retrograde phospholipid transport and stress response systems in CHX resistance and the consequences of prolonged CHX exposure.

Comparative Analysis of Outer Membrane Vesicle Isolation Methods With an Escherichia coli tolA Mutant Reveals a Hypervesiculating Phenotype With Outer-Inner Membrane Vesicle Content.

Outer membrane vesicles (OMVs) produced by Gram-negative bacteria are mediators of cell survival and pathogenesis by facilitating virulence factor dissemination and resistance to antimicrobials. Studies of OMV properties often focus on hypervesiculating Escherichia coli mutants that have increased OMV production when compared to their corresponding wild-type (WT) strains. Currently, two conventional techniques, ultracentrifugation (UC) and ultradiafiltration (UF), are used interchangeably to isolate OMVs, however, there is concern that each technique may inadvertently alter the properties of isolated OMVs during study. To address this concern, we compared two OMV isolation methods, UC and UF, with respect to final OMV quantities, size distributions, and morphologies using a hypervesiculating Escherichia coli K-12 ΔtolA mutant. Nanoparticle tracking analysis (NTA) indicated that UC techniques result in lower vesicle yields compared to UF. However, UF permitted isolation of OMVs with smaller average sizes than UC, highlighting a potential OMV isolation size bias by each technique. Cryo-transmission electron microscopy (cryo-TEM) visualization of isolated OMVs revealed distinct morphological differences between WT and ΔtolA OMVs, where ΔtolA OMVs isolated by either UC or UF method possessed a greater proportion of OMVs with two or more membranes. Proteomic OMV analysis of WT and ΔtolA OMVs confirmed that ΔtolA enhances inner plasma membrane carryover in multi-lamellar OMVs. This study demonstrates that UC and UF are useful techniques for OMV isolation, where UF may be preferable due to faster isolation, higher OMV yields and enrichment of smaller sized vesicles.

Antiseptic quaternary ammonium compound tolerance by gram-negative bacteria can be rapidly detected using an impermeant fluorescent dye-based assay.

Biocides such as quaternary ammonium compounds (QACs) are potentially important contributors towards bacterial antimicrobial resistance development, however, their contributions are unclear due to a lack of internationally recognized biocide testing standards. Methods to detect QAC tolerance are limited to laborious traditional antimicrobial susceptibility testing (AST) methods. Here, we developed a rapid fluorescent dye-based membrane impermeant assay (RFDMIA) to discriminate QAC susceptibility among Gram-negative Enterobacterales and Pseudomonadales species. RFDMIA uses a membrane impermeant fluorescent dye, propidium iodide, in a 30-min 96-well fluorescent microplate-based assay where cell suspensions are exposed to increasing QAC concentrations. Our results demonstrate that RFDMIA can discriminate between QAC-susceptible and QAC-adapted Escherichia coli tolerant phenotypes and predict benzalkonium and cetrimide tolerance in all species tested except for intrinsically fluorescent Pseudomonas aeruginosa. RFDMIA identified a close association to minimum inhibitory concentration values determined by broth microdilution AST and increasing fluorescent dye emission values. RFDMIA emission values and scanning electron microscopy results also suggest that CET-adapted E. coli isolates have a CET dependence, where cells require sub-inhibitory CET concentrations to maintain bacilliform cell integrity. Overall, this study generates a new, rapid, sensitive fluorescent assay capable of detecting QAC-susceptible Gram-negative bacteria phenotypes and cell membrane perturbations.

Selective area oxidation of copper derived from chemical vapor deposited graphene microstructure.

The barrier properties of graphene coating are highly correlated with its microstructure which is then determined by the chemical vapor deposition (CVD) growth history on metals. We demonstrate here an unrevealed selective area oxidation of copper under graphene, which is derived from the implicit-etching-controlled CVD growth mode of graphene. By charactering and analyzing the selective area patterns of Cu oxidation, an etched pattern trace with nano/microvoids during graphene growth has been proposed to account for this. Based on such selective oxidation of Cu, distributed galvanic corrosion will be triggered and proceed locally at the interface of graphene-Cu system to coalescence together under a continuous corrosion environment, eventually presenting a homogeneous oxidation of Cu and gradual decoupling of graphene-Cu system. This discovery will assist our understanding of the barrier properties of two-dimensional materials and can be extended to other applications related to quality monitoring of grown materials and defects-based chemical modifications.